Important: Please read the Qt Code of Conduct - https://forum.qt.io/topic/113070/qt-code-of-conduct

Cannot load from SD card created with Boot to Qt tool on Colibri iMX6



  • Greetings,
    I followed procedure listed in http://doc.qt.io/QtEnterpriseEmbedded/qtee-
    preparing-hardware-colibri-imx6.html to prepare Toradex Colibri iMX6 board to
    load Qt application 5.7. I was able to create an SD card with uImage and
    u-boot image ,flash_mmc.img, flash_blk.img and 2 dtb files. But was not able
    to load from SD card.
    I issued commands:
    run setupdate
    run update_uboot
    then after rebooting my board, following commands were ran
    env default -a
    saveenv

    And after rebooting one more time with SD card inserted, it did not load new
    kernel from SD card.

    Will you please help me to see what step I missed or did not execute
    correctly.

    Thank you very much for your help.
    Natalie


  • Lifetime Qt Champion

    Hi and welcome to devnet,

    Boot2Qt being a licensed product, I'd recommend contacting the Qt Company directly to help with that matter. AFAIK, Toradex's customer service is also pretty good so you might also consider contacting them.



  • @SGaist From a couple of days it is also opensourced as descibed in blog.



  • Thank you so much for your recommendation! I will follow up with them.


Log in to reply