Speedometer

[Darq]

This post is deleted!

[Darq]

@Markkyboy Does not display this item.

[Markkyboy]

@Darq - well, that is odd. Nothing displayed in console, that's odd.

IF you copied your code from here; https://forum.qt.io/topic/113004/circulargauge-style which it looks like you did, did you fully read the response given on how to fix the problem?

Also, I notice you have omitted the use of Window and have opened your code with a Rectangle instead.

[Darq]

@Markkyboy Thank you for your help. I called the speedometer without using "CircularGauge". I want to trigger the movement of the pointer using "Rotation". How can I assign the needle offset angle to a given reading? I mean the following case: I have a reading of e.g. 0, an angle of 270 degrees, or a reading of 10, an angle of 300 degrees. How to make the pointer move smoothly to an angle of 270 when the value is 0, and when the value 10 appears, it moves smoothly to an angle of 300?

[Markkyboy]

Earlier you told me nothing is displayed when building the app. Do I now assume you are seeing your app displayed on screen?, if so, what are you seeing?, what does console say now?

The more info you give the better we progress, right now, you are trying to run before you can walk.

[Darq]

@Markkyboy Previously, I didn't want to run the "CircularGauge" command, so I created the speedometer scale as a PNG image using the "Rectangle" command. Now I want to call up the speedometer needle. It is triggered similarly to the speedometer scales. But in order for it to move, I need to specify its "Rotation" command. This must be assigned to a numerical value and an offset angle. I'm downloading digital speed information and now I need to reflect it on the PNG speedometer scale. I just don't know how to do it.

[Markkyboy]

@Darq I think you should take a look at this GitHub, it offers all kinds of gauges, including one with needle movement. I have personally taken many cues from this code and have developed dozens of speedometer types. https://github.com/arunpkqt/CircularSlider
I think you can learn a lot from this code and build what you like.

[johngod]

@Darq Check this this post, I think this is what you want https://forum.qt.io/topic/147450/how-to-animate-the-angle-of-neddle-in-a-speedometer/5

[Darq]

@Markkyboy How to limit the movement of the hand? What I want is for it not to show values ​​below 50. To sum up, the movement of the pointer would only start after reaching 50.

[Markkyboy]

@Darq - without seeing what code you have so far, I don't know how to answer your question. Please post some working code, or what you have so far. It is much easier to see and have ideas when one can see some code.

EDIT: As I am already using CircularSlider from arunpkqt in several projects, I can easily adapt my code with your code and possibly work out a way to get what you want.

[Darq]

@Markkyboy
HmiImage {
id: pointer1
anchors.centerIn: parent
source: "icons/abc.png"
rotation: 2.25*XXX+225
}

XXX is my measured value
225 is an angle where the value is 0
2.25 is a degrees conversion, so for example, my value indicates 1, which corresponds to 2.25 degrees

[Markkyboy]

@Darq - this small bit of code is not enough for me to work with.

[Darq]

@Markkyboy There is almost no more code there. There is only one more HmiImage defining the appearance of the shield (it loads the shields, i.e. a png file). In this code snippet there is only the "source" command which specifies the location of the png file. The png file has a scale drawn on it. The hint is called by the code above, which specifies its position (e.g. point 0 is at 225 degrees, so in the png file 0 is drawn at 225 degrees).

[Markkyboy]

@Darq - sorry, I just don't understand what you're trying to do. I can take plenty of wild guesses but I don't have the time to do so.

Making a functional speedometer requires a lot more code in my opinion. You could at the very least show an image/screenshot of what you have, otherwise I'm in the dark. At the very least, a mock up image of what you're wanting might be helpful.

What kind of speedo only functions when hitting 50?, what is the idea of this?, 50 what?, kmh?, mph?, kts?.....?

What is "icons/abc.png"?, what does it look like?

What is "hmiImage", where is that code?

Are you taking ANY cues from arunpkqt's application?

Seriously now, what you write here gives me very little to go on. I'm not sure I can help you.

[Markkyboy]

Rather than leave you completely in the dark, Darq, here's some full code to make a working speedometer. Perhaps from this you can make it do what you want/require.

import QtQuick
import QtQuick.Controls

Item {
    id: control

    property int trackWidth: 20
    property int progressWidth: 20
    property color trackColor: "#505050"
    property color progressColor: "#3a4ec4"
    property bool hideTrack: false
    property bool hideProgress: false

    property color handleColor: "#fefefe"
    property int handleWidth: 80
    property int handleHeight: 80
    property int handleRadius: 40
    property int handleVerticalOffset: 0

    property real startAngle: 0
    property real endAngle: 360
    property real minValue: 0.0
    property real maxValue: 1.0

    property real value: 0.0
    readonly property alias angle: internal.angle


    property real stepSize: 0
    property bool snap: false
    property Component handle: null
    readonly property alias pressed: trackMouse.pressed

    property bool interactive: true
    property alias cursorShape: trackMouse.cursorShape

    implicitWidth: 250
    implicitHeight: 250

    Binding {
        target: control
        property: "value"
        value: control.snap ? internal.snappedValue : internal.mapFromValue(startAngle, endAngle, minValue, maxValue, internal.angleProxy)
        when: internal.setUpdatedValue
    }

    QtObject {
        id: internal

        property point centerPt: Qt.point(control.width / 2, control.height / 2)
        property real baseRadius: Math.min(control.width, control.height) / 2 - Math.max(control.trackWidth, control.progressWidth) / 2
        property real actualSpanAngle: control.endAngle - control.startAngle
        property color transparentColor: "transparent"
        property color trackColor: control.trackColor
        property bool setUpdatedValue: false
        property real angleProxy: control.startAngle
        property real snappedValue: 0.0
        readonly property real angle: internal.mapFromValue(control.minValue, control.maxValue, control.startAngle, control.endAngle, control.value)

        function mapFromValue(inMin, inMax, outMin, outMax, inValue) {
            return (inValue - inMin) * (outMax - outMin) / (inMax - inMin) + outMin;
        }

        function updateAngle(angleVal) {
            if (angleVal < 0)
                angleVal += 360;

            if ((angleVal >= control.startAngle) && (angleVal <= control.endAngle)) {
                internal.setUpdatedValue = true;
                internal.angleProxy = Qt.binding(function() { return angleVal; });
                if(control.snap) {
                    var mappedValue = internal.mapFromValue(startAngle, endAngle, minValue, maxValue, internal.angleProxy)
                    var range = control.maxValue - control.minValue
                    var effectiveStep = 2
                    var actualVal = control.stepSize * Math.round(mappedValue / control.stepSize)
                    internal.snappedValue = actualVal
                }
                internal.setUpdatedValue = false;
            }
        }
    }

    MouseArea {
        anchors.fill: parent
        enabled: control.interactive
        onClicked: {
            var outerRadius = Math.min(control.width, control.height)/ 2
            var innerRadius = outerRadius - Math.max(control.trackWidth, 20);
            var clickedDistance = (mouseX - internal.centerPt.x) * (mouseX - internal.centerPt.x) + (mouseY - internal.centerPt.y) * (mouseY - internal.centerPt.y);
            var innerRadius2 = (innerRadius * innerRadius);
            var outerRadius2 = (outerRadius * outerRadius);
            var isOutOfInnerRadius = clickedDistance > innerRadius2;
            var inInSideOuterRadius = clickedDistance <= outerRadius2;
            if (inInSideOuterRadius && isOutOfInnerRadius) {
                var angleDeg = Math.atan2(mouseY - internal.centerPt.y, mouseX - internal.centerPt.x) * 180 / Math.PI + 90;
                internal.updateAngle(angleDeg);
            }
        }
    }

    // Handle Item
    Item {
        id: handleItem
        visible: control.interactive

        x: control.width / 2 - width / 2
        y: control.height / 2 - height / 2
        // make sure that the slider handle is always on top as we can set custom track or progress items
        z: 2
        width: control.handleWidth
        height: control.handleHeight
        antialiasing: true
        transform: [
            Translate {
                y: -(Math.min(control.width, control.height) / 2) + Math.max(control.trackWidth, control.progressWidth) / 2 + control.handleVerticalOffset
            },
            Rotation {
                angle: control.angle
                origin.x: handleItem.width / 2
                origin.y: handleItem.height / 2
            }
        ]

        MouseArea {
            id: trackMouse
            enabled: control.interactive

            function getVal() {
                var handlePoint = mapToItem(control, trackMouse.mouseX, trackMouse.mouseY);
                // angle in degrees
                var angleDeg = Math.atan2(handlePoint.y - internal.centerPt.y, handlePoint.x - internal.centerPt.x) * 180 / Math.PI + 90;
                internal.updateAngle(angleDeg);
            }

            anchors.fill: parent
            onPositionChanged: getVal()
            onClicked: getVal()
            cursorShape: Qt.ArrowCursor
        }

        Loader {
            id: handleLoader

            sourceComponent: control.handle ? handle : handleComponent
        }
    }

    /// Default handle component
    Component {
        id: handleComponent

        Rectangle {
            width: control.handleWidth
            height: control.handleHeight
            color: control.handleColor
            radius: control.handleRadius
            antialiasing: true
        }
    }
}

import QtQuick
import QtQuick.Controls
import "../components"

Page {
    id: darqSpeedo

    allowedOrientations: Orientation.All // this is specific to SailfishOS and can likely be omitted.

    // imported from "../components"
    CircularSlider {
        id: speedometer
        interactive: false
        anchors.centerIn: parent
        width: 1000
        height: width
        value: 0
        startAngle: -108
        endAngle: 108
        minValue: 0
        maxValue: 180
        anchors {
            verticalCenterOffset: 200
            verticalCenter: parent.verticalCenter
            horizontalCenter: parent.horizontalCenter
        }
        // Tickmarks around gauge
        Repeater {
            model: 37
            Rectangle {
                id: ones
                width: 6
                height: index % 4 === 0 ? 50 : 25
                color: index % 4 === 0 ? "white" : "silver"
                property real angle: index * 6
                transform: [ Translate { x: parent.width / 2 - width / 2; y: -155 },
                    Rotation {
                        origin.x: parent.width / 2
                        origin.y: parent.height / 2
                        angle: ones.angle + parent.startAngle
                    }
                ]
            }
        }
        // Numbers around gauge
        Repeater {
            model: 10
            Label {
                id: digits
                text: index * 20
                color: "white"
                font { bold: true; pixelSize: 48 }
                property real angle: index * 24
                transform: [
                    Translate {
                        x: parent.width / 2 - width / 2
                        y: -75 // distance from tickmarks
                    },
                    Rotation {
                        origin.x: parent.width / 2
                        origin.y: parent.height / 2
                        angle: digits.angle + parent.startAngle
                    }
                ]
                // keeps numbers horizontal
                rotation: -digits.angle - parent.startAngle
            }
        }
        // Needle hub
        Rectangle {
            anchors.centerIn: speedometer
            width: 100
            height: width
            radius: width/2
            color: "#a0545454"
        }
        // Needle/pointer
        Repeater {
            model: 1
            Rectangle {
                id: needle
                width: 20
                height: 450
                color: "orange"
                radius: 20
                transform: [
                    Translate {
                        x: speedometer.width / 2 - width / 2
                        y: 50 // needle distance from centre
                    },
                    Rotation {
                        origin.x: speedometer.width / 2
                        origin.y: speedometer.height / 2
                        angle: speedometer.angle
                    }
                ]
            }
        }
        // Animation for demo purposes
        SequentialAnimation on value {
            id: animation
            loops: Animation.Infinite
            running: true
            NumberAnimation { from: 0; to: 180; duration: 2000 }
            NumberAnimation { from: 180; to: 0; duration: 2000 }
        }
    }
}

NOTE: I use Page, as my apps are built for my mobile phone using SailfishOS. You don't have to use Page, you can likely swap it for Item instead.

[Darq]

@Markkyboy I don't mean the code for the entire speedometer. I want to restrict only this part of the code " rotation: 2.25*XXX+225 " to move in the angle range, e.g. from 225 to 135. I want there to be no movement in the range from 136 to 224 degrees. I don't know how to specify this in the code.

[Markkyboy]

@Darq said in Speedometer:

...... I want there to be no movement in the range from 136 to 224 degrees. I don't know how to specify this in the code.

Sorry, right now I have no idea how to get what you want. I guess, like me, you will have to keep trying and playing until you succeed. I found little to no help with my own endeavours but fumbled my way through the code you see above. If I have an epiphany, I'll post it here but I make no promise.

Could you explain why you want such a feature?

[Darq]

@Markkyboy Commands like "CircularSlider" don't work for me. This shield is called as png. The only problem is with the limitation of the "Rotation" command, so that the rotation is only within a specific range.

[Sattiy]

@Markkyboy Can You Please specify which file is which file so i can integrate it accordingly like which is main.qml file here

[Markkyboy]

The first file is CircularSlider.qml, this forms the basis for the speedometer gauge in a circular fashion.

The second file is basically the 'Main.qml', in my case, it is called FirstPage.qml.