Deploy on BBB: cannot execute binary file: Exec format error
-
Hi,
Yes, i tried to crosscompile QT for my BBB,
First I tried to run the x86 version of my application on my BBB and then i tried to compile application with an ARM toolchain but still using my desktop version of Qt, and it naturally did not work. So i tried to configure my QT opensource 5.5.1 on host ubuntu for BBB, and when i selected arm-linux-gnueabi-gcc, an error appeared: "Compiler "Compiler BBB" (arm-linux-generic-elf-32bit) cannot produce code for profile QT "QT 5.5.1 GCC 32bit" (x86-linux-generic-elf-32bit)". By the way, BBB Device responded normally, i can see list of processes.
P.S. There is qt creator 4 installed on BBB, but i want develop project only on PC
wrote on 25 Nov 2016, 05:25 last edited byi suppose i need to change qt profile from x86 to arm, but i can not find qmake file for arm
-
i suppose i need to change qt profile from x86 to arm, but i can not find qmake file for arm
@Andrey-Shmelew How did you call configure?
-
@Andrey-Shmelew How did you call configure?
wrote on 25 Nov 2016, 06:09 last edited by Andrey Shmelewafter qt 5 install :
1 - added new kit
2 - added device type (generic Linux Device)
3 - added a device (linux device), ip address 192.168.7.2, port 22
4 - added GCC compiler, armv8l-linux-gnueabi-gthis step i can not do because can't find qmake file:
5 - added QT version with qmake file for arm -
after qt 5 install :
1 - added new kit
2 - added device type (generic Linux Device)
3 - added a device (linux device), ip address 192.168.7.2, port 22
4 - added GCC compiler, armv8l-linux-gnueabi-gthis step i can not do because can't find qmake file:
5 - added QT version with qmake file for arm@Andrey-Shmelew said in Deploy on BBB: cannot execute binary file: Exec format error:
added QT version with qmake file for arm
Well, you need Qt built for ARM. That means you need to download Qt source code, call configure with correct parameters and then make;make install. qmake will be built during compilation. When you have Qt build for ARM then you can build your app for ARM.
-
@Andrey-Shmelew said in Deploy on BBB: cannot execute binary file: Exec format error:
added QT version with qmake file for arm
Well, you need Qt built for ARM. That means you need to download Qt source code, call configure with correct parameters and then make;make install. qmake will be built during compilation. When you have Qt build for ARM then you can build your app for ARM.
wrote on 25 Nov 2016, 06:43 last edited by Andrey Shmelew@jsulm
thanks,
but i have never compiled QT From source code, so will you provide me a good tutorial?
by the way, on this video https://youtu.be/eLr35wUrz6Q?t=248 the author just points qmake file -
@jsulm
thanks,
but i have never compiled QT From source code, so will you provide me a good tutorial?
by the way, on this video https://youtu.be/eLr35wUrz6Q?t=248 the author just points qmake file@Andrey-Shmelew Apparently the author already has an ARM build.
Cross compilation is not an easy task. I don't have any tutorial.
But you can search on internet, here is one for RaspberryPi: https://wiki.qt.io/RaspberryPi_Beginners_Guide -
@Andrey-Shmelew Apparently the author already has an ARM build.
Cross compilation is not an easy task. I don't have any tutorial.
But you can search on internet, here is one for RaspberryPi: https://wiki.qt.io/RaspberryPi_Beginners_Guidewrote on 25 Nov 2016, 07:47 last edited by Andrey ShmelewThis post is deleted! -
This post is deleted!
wrote on 28 Nov 2016, 08:19 last edited byi have built qt for BBB as described in the link i posted in previous post and it finally works! I can deploy my QT project now. WOW!!! But not all projects. (sad)
Because of some reason apps that are built with qtquick does not start!
But there are a lot of videos with QtQuick running on BBB (for ex. https://www.youtube.com/watch?v=eDrBCzNSWaQ)
i think it happens because of absent of necessary drivers.
how can i start qtquick app on BBB,
could anybody help me with this problem? -
i have built qt for BBB as described in the link i posted in previous post and it finally works! I can deploy my QT project now. WOW!!! But not all projects. (sad)
Because of some reason apps that are built with qtquick does not start!
But there are a lot of videos with QtQuick running on BBB (for ex. https://www.youtube.com/watch?v=eDrBCzNSWaQ)
i think it happens because of absent of necessary drivers.
how can i start qtquick app on BBB,
could anybody help me with this problem?@Andrey-Shmelew As far as I know QtQuick requires OpenGL?
-
@Andrey-Shmelew As far as I know QtQuick requires OpenGL?
wrote on 28 Nov 2016, 09:04 last edited by@jsulm
Right! And as far as i know BBB does not have GPU.
But if you look at the video u can see working qtquick. (who knows maybe it is a cheating).
is it possible to make QtQuick without openGL using?
Thanks! -
@jsulm
Right! And as far as i know BBB does not have GPU.
But if you look at the video u can see working qtquick. (who knows maybe it is a cheating).
is it possible to make QtQuick without openGL using?
Thanks!@Andrey-Shmelew Probably software rendering. But I don't know how to activate it. Maybe anybody else knows?
-
@Andrey-Shmelew Probably software rendering. But I don't know how to activate it. Maybe anybody else knows?
wrote on 28 Nov 2016, 10:18 last edited by@jsulm
there is a Qt Quick 2D Renderer, that works instead OpnGL ES 2 on boards without GPU like BBB, seems to be good for me.
As described, i should use :
export QMLSCENE_DEVICE=softwarecontext
but i have no idea what does this string mean.
Any thoughts? -
@jsulm
there is a Qt Quick 2D Renderer, that works instead OpnGL ES 2 on boards without GPU like BBB, seems to be good for me.
As described, i should use :
export QMLSCENE_DEVICE=softwarecontext
but i have no idea what does this string mean.
Any thoughts?@Andrey-Shmelew It defines environment variable QMLSCENE_DEVICE and assigns it "softwarecontext" as value. I guess QtQuick checks that variable and activates software rendering if it is set to "softwarecontext".
So, you first set this variable and then (in the same console) you start your application. -
@Andrey-Shmelew It defines environment variable QMLSCENE_DEVICE and assigns it "softwarecontext" as value. I guess QtQuick checks that variable and activates software rendering if it is set to "softwarecontext".
So, you first set this variable and then (in the same console) you start your application.wrote on 30 Nov 2016, 06:36 last edited bymark as solved, please
-
mark as solved, please
@Andrey-Shmelew Sorry, it's your thread you should mark it as solved.
-
@Andrey-Shmelew Sorry, it's your thread you should mark it as solved.
wrote on 30 Nov 2016, 10:59 last edited by Andrey ShmelewAn another issue,
i want to use Charts in my application.
When i compile app for Windows,its okay, but when i compile it for Linux, it can not find charts module (Unknown module(s) in QT: charts), even if there is 'QT += charts' inside myproject.pro file. As i understand, i need to rebuild qt creator for linux with charts module, right?
15/21