Signal/Slots doesn't work with QSlider and QDoubleSpinBox

jsulm

Not really. Should both QDoubleSpinbox have the same value if that checkbox is checked?

? Offline

@jsulm
They should have the value when:

The Checkbox is checked and
one slider is dragged. So than both checkboxes have the value from slider

U understand?

jsulm

Unfortunately not:
First version: "I have a chackbox. If the Checkbox is checked, the two spinboxes are Ratio. If i changed one slider, the other slider changed too. They both are Ratio to each other."

Second version: "
The Checkbox is checked and
one slider is dragged. So than both checkboxes have the value from slider"

In the first version you are talking about two spinboxes in the second version you are talking about two checkboxes. Sorry, but I'm lost...
And you did not answer my question whether both spinboxes (I assume you really mean spinboxes) should have the same value if one of them is changed while checkbox is checked.

? Offline

@jsulm
Yes, sorry. I mean SpinBoxes...

Your Question:

Yes, both should have the same value when the ceckbox is checked:

   if (m_keepRatioCheckBox->isChecked())
   {
      connect(sliderHeight, &QSlider::valueChanged, m_hightSpinBox, &QDoubleSpinBox::setValue);
      connect(sliderHeight, &QSlider::valueChanged, m_widthSpinBox, &QDoubleSpinBox::setValue);
      connect(sliderWidth, &QSlider::valueChanged, m_hightSpinBox, &QDoubleSpinBox::setValue);
      connect(sliderWidth, &QSlider::valueChanged, m_widthSpinBox, &QDoubleSpinBox::setValue);
   }

This won't work..

jsulm

What you could do: if, for example, sliderHeight is changed you do not set m_widthSpinBox directly, but instead you calculate the difference between m_hightSpinBox and its new value and add this difference (which can be negative) to m_widthSpinBox.
You will need your own slots for that.

? Offline

@jsulm
Can you make/Show an example, please?

jsulm

I did not test this code:

void MyClass::sliderHeightChanged(int value)
{
    double diff = m_heightSpinBox->value - value;
    m_heightSpinBox->setValue(value);
    m_widthSpinBox->setValue(m_widthSpinBox->value + diff);
}

void MyClass::sliderWidthChanged(int value)
{

    double diff = m_widthSpinBox->value - value;
    m_widthSpinBox->setValue(value);
    m_HeightSpinBox->setValue(m_heightSpinBox->value + diff);
}

if (m_keepRatioCheckBox->isChecked())
{
    connect(sliderHeight, &QSlider::valueChanged, this, &MyClass::sliderHeightChanged);
    connect(sliderWidth, &QSlider::valueChanged, this, &MyClass::sliderWidthChanged);
}

? Offline

@jsulm
I have written all the Code for the Dialog in a Header file..

? Offline

@jsulm
Where can i insert your Code?

class ResizeImageDialog : public QDialog
{
Q_OBJECT

double         m_ratio;

QLabel         *m_widthLabel;
QLabel         *m_hightLabel;
QDoubleSpinBox *m_widthSpinBox;
QDoubleSpinBox *m_hightSpinBox;
QRadioButton   *m_keepRatioCheckBox;
QPushButton    *m_okButton;
QPushButton    *m_cancelButton;
QSlider        *sliderWidth;
QSlider        *sliderHeight;
QHBoxLayout    *m_widthLayout;
QHBoxLayout    *m_hightLayout;
QHBoxLayout    *m_buttonLayout;
QVBoxLayout    *m_generalLayout;


public:
ResizeImageDialog(QWidget * parent = 0, double imageWidth = 100.0, double imageHight = 100.0) : QDialog(parent)
{
   m_widthLabel = new QLabel("Breite");
   m_hightLabel = new QLabel("Höhe");

   m_widthSpinBox = new QDoubleSpinBox;
   m_widthSpinBox->setMaximum(1500);
   m_widthSpinBox->setValue(imageWidth);


   sliderHeight = new QSlider(Qt::Horizontal);
   sliderHeight->setMaximum(1500);
   sliderHeight->setMinimum(0);




   sliderWidth = new QSlider(Qt::Horizontal);
   sliderWidth->setMaximum(1500);
   sliderWidth->setMinimum(0);


   m_hightSpinBox = new QDoubleSpinBox;
   m_hightSpinBox->setMaximum(1500);
   m_hightSpinBox->setValue(imageHight);

   connect(sliderHeight, &QSlider::valueChanged, m_hightSpinBox, &QDoubleSpinBox::setValue);
   connect(sliderWidth, &QSlider::valueChanged, m_widthSpinBox, &QDoubleSpinBox::setValue);

   m_ratio = imageWidth / imageHight;

   m_keepRatioCheckBox = new QRadioButton("Keep ratio", this);
   m_keepRatioCheckBox->setChecked(false);


   if (m_keepRatioCheckBox->isChecked())
   {
      connect(sliderHeight, &QSlider::valueChanged, m_hightSpinBox, &QDoubleSpinBox::setValue);
      connect(sliderHeight, &QSlider::valueChanged, m_widthSpinBox, &QDoubleSpinBox::setValue);
      connect(sliderWidth, &QSlider::valueChanged, m_hightSpinBox, &QDoubleSpinBox::setValue);
      connect(sliderWidth, &QSlider::valueChanged, m_widthSpinBox, &QDoubleSpinBox::setValue);
      m_hightSpinBox->setValue(25.8);
   }

   
   
   
   

   m_widthLayout = new QHBoxLayout;
   m_widthLayout->addWidget(m_widthLabel);
   m_widthLayout->addWidget(m_widthSpinBox);
   m_widthLayout->addWidget(sliderWidth);

   m_hightLayout = new QHBoxLayout;
   m_hightLayout->addWidget(m_hightLabel);
   m_hightLayout->addWidget(m_hightSpinBox);
   m_hightLayout->addWidget(sliderHeight);

   m_okButton = new QPushButton("Ok");
   connect(m_okButton, SIGNAL(clicked()), this, SLOT(accept()));

   m_cancelButton = new QPushButton("Abbrechen");
   connect(m_cancelButton, SIGNAL(clicked()), this, SLOT(reject()));

   m_buttonLayout = new QHBoxLayout;
   m_buttonLayout->addStretch();
   m_buttonLayout->addWidget(m_okButton);
   m_buttonLayout->addWidget(m_cancelButton);

   m_generalLayout = new QVBoxLayout;
   m_generalLayout->addLayout(m_widthLayout);
   m_generalLayout->addLayout(m_hightLayout);
   m_generalLayout->addWidget(m_keepRatioCheckBox);
   m_generalLayout->addLayout(m_buttonLayout);
   setLayout(m_generalLayout);

   setMaximumSize(500, 300);
   resize(350, 100);
   setModal(true);
   //resize(670,630);
   setWindowTitle(tr("Bildgröße ändern"));
   setWindowFlags(windowFlags() & ~Qt::WindowContextHelpButtonHint);
}

static QPair<double, double> getNewSize(QWidget * parent = 0, double imageWidth = 100.0, double imageHight = 100.0)
{
   ResizeImageDialog dlg(parent, imageWidth, imageHight);

   dlg.exec();



   QPair<double, double> size;
   size.first  = dlg.m_widthSpinBox->value();
   size.second = dlg.m_hightSpinBox->value();
   return size;
}
};


#endif // PAGESTEXTEDIT_H

A .cpp file is not there for the dialog

? Offline

@jsulm
Are there other methods for resizing an Image?

Maybe drag the Image in the Corners for resizing?