Building Qt with OpenGL ES using ti Graphic

[Kamal Badi]

Hi there,
am trying to configure qt-everywhere-opensource-src-4.8.2 with opengl ES 2 using Graphics_SDK_4_09_00_01 under Ubuntu 12.04
i followed these steps that mentioned in Building Qt with OpenGL ES
so its all goes well till i run

./configure -prefix <QT_SDK_INSTALL_DIR> -embedded arm -platform qws/linux-x86-g++ -xplatform qws/linux-TIarmv7-sgx-g++ -depths 16,24,32 
-no-mmx -no-3dnow -no-sse -no-sse2 -no-glib -no-cups -no-largefile -no-accessibility -no-openssl -no-gtkstyle -qt-mouse-pc -qt-mouse-linuxtp 
-qt-mouse-linuxinput -plugin-mouse-linuxtp -plugin-mouse-pc -fast -opengl es2 -qt-gfx-transformed -qt-gfx-vnc -qt-gfx-linuxfb -qt-gfx-multiscreen 
-qt-mouse-tslib -plugin-gfx-powervr -D QT_NO_QWS_CURSOR -D QT_QWS_CLIENTBLIT 
 

it gives me this error:

The OpenGL ES 2.0 functionality test failed!
 You might need to modify the include and library search paths by editing
 QMAKE_INCDIR_OPENGL, QMAKE_LIBDIR_OPENGL and QMAKE_LIBS_OPENGL in
 /home/kamal/qt-everywhere-opensource-src-4.8.2/mkspecs/qws/linux-TIarmv7-sgx-g++.

this is Qmake.conf

#
# qmake configuration for building with arm-linux-g++
#

include(../../common/gcc-base.conf)
include(../../common/gcc-base-unix.conf)
include(../../common/g++-unix.conf)
include(../../common/qws.conf)


#User specific Path - To Be edited by User
QT_INSTALL_DIR          = /home/kamal/qt-everywhere-opensource-src-4.8.2
SGX_SDK_ROOT	        =  /home/kamal/Graphics_SDK_4_09_00_01
TSLIB_INCDIR            = 
TSLIB_LIBDIR            = 


# modifications to g++.conf
#QMAKE_CFLAGS_RELEASE	= -O3 -march=armv7-a -mtune=cortex-a8 -mfpu=neon -mfloat-abi=softfp
#QMAKE_CXXFLAGS_RELEASE	= -O3 -march=armv7-a -mtune=cortex-a8 -mfpu=neon -mfloat-abi=softfp
QMAKE_CFLAGS	+= -O3 -march=armv7-a -mtune=cortex-a8 -mfpu=neon -mfloat-abi=softfp
QMAKE_CXXFLAGS	+= -O3 -march=armv7-a -mtune=cortex-a8 -mfpu=neon -mfloat-abi=softfp

QMAKE_CC                = arm-linux-gnueabihf-gcc
QMAKE_CXX               = arm-linux-gnueabihf-g++
QMAKE_LINK              = arm-linux-gnueabihf-g++
QMAKE_LINK_SHLIB        = arm-linux-gnueabihf-g++

# modifications to linux.conf
QMAKE_AR                = arm-linux-gnueabihf-ar cqs
QMAKE_OBJCOPY           = arm-linux-gnueabihf-objcopy
QMAKE_STRIP             = arm-linux-gnueabihf-strip

# Prabu modified for Qt4.8
QMAKE_COPY = cp
QMAKE_DEL_FILE = rm
QMAKE_DEL_DIR = rm -r
QMAKE_MOVE = mv
QMAKE_CHK_DIR_EXISTS = test -d
QMAKE_MKDIR = mkdir -p

#Do not edit beyond this

QMAKE_INCDIR_OPENGL_ES2 = /home/kamal/Graphics_SDK_4_09_00_01/include/OGLES
QMAKE_LIBDIR_OPENGL_ES2 = /home/kamal/Graphics_SDK_4_09_00_01/gfx_dbg_es8.x
QMAKE_LIBS_OPENGL_ES2   = -lEGL -lGLESv2 -lGLES_CM -lIMGegl -lsrv_um -lusc

QMAKE_INCDIR_OPENGL     += $$QMAKE_INCDIR_OPENGL_ES2
QMAKE_LIBDIR_OPENGL     = $$QMAKE_LIBDIR_OPENGL_ES2
QMAKE_LIBDIR_OPENGL_QT  = $$QMAKE_LIBDIR_OPENGL_ES2
QMAKE_LIBS_OPENGL_ES1   = -lEGL -lGLES_CM -lIMGegl -lsrv_um -lusc

QMAKE_INCDIR_OPENVG     = $$QMAKE_INCDIR_OPENGL_ES2
QMAKE_LIBDIR_OPENVG     = $$QMAKE_LIBDIR_OPENGL_ES2
QMAKE_LIBS_OPENVG       = -lEGL -lGLESv2 -lGLES_CM -lIMGegl -lsrv_um -lOpenVG -lOpenVGU

QMAKE_INCDIR_EGL        = $$QMAKE_INCDIR_OPENGL_ES2
QMAKE_INCDIR_EGL        += $$QT_INSTALL_DIR/src/3rdparty/powervr/wsegl2
QMAKE_INCDIR_POWERVR    = $$QT_INSTALL_DIR/src/3rdparty/powervr/wsegl2
QMAKE_LIBDIR_EGL        = $$QMAKE_LIBDIR_OPENGL_ES2
QMAKE_LIBS_EGL          = -lEGL -lIMGegl -lsrv_um -lGLESv2 -lGLES_CM -lusc

QMAKE_INCDIR += $$TSLIB_INCDIR 
QMAKE_INCDIR += $$GLIB_INCDIR 
QMAKE_INCDIR += $$GLIB_CONFIGINCLUDEDIR
QMAKE_INCDIR += $$GST_INCLUDEDIR
QMAKE_INCDIR += $$LIBXML_INCLUDEDIR

QMAKE_INCDIR += $$QMAKE_INCDIR_OPENGL_ES2
QMAKE_LIBDIR += $$QMAKE_LIBDIR_OPENGL_ES2 
QMAKE_LIBDIR += $$TSLIB_LIBDIR
#QMAKE_LIBS += $$QMAKE_LIBS_OPENGL_ES2 -lts -lglib -lgthread-2.0 -lgstreamer-0.10
QMAKE_LIBS += $$QMAKE_LIBS_OPENGL_ES2

load(qt_config)

so what is wrong here i can't figure it out !
thanks in advance