QT embedded simulate (up,down,left,right,enter) navigation

BluTiGeS

Hello,

I am new to the QT embedded development and I have few problems:

I am currently developing on a different target display which has a resolution of 640x480 pixels and 96 dpi using /dev/fb0.
But the new target display has a color depth of 1 (black/white) and 240x128 dots per inch.
Now my question is how can I simulate the new target display size on the the old one with the higher resolution? Is there any way of scale or zooming to fit the size, it later will have (real physical Millimeters), including Buttons etc?

Here is a example how it Looks now:
http://www.bilder-upload.eu/show.php?file=5e32bf-1430483434.png
and this way i would have it (zoomed/scaled to full width)
http://www.bilder-upload.eu/show.php?file=980a99-1430483686.jpg

Is it possible to set color depth to black white for the LinuxFB
for e.g.

./my_app -qws -display LinuxFb:/dev/fb0:depth=1 ?

Can QT handle a membrane button touches? For example a 5 keys keypad, to handle the menu and input navigations?

Many Thanks in advance

Regards

SGaist

Hi and welcome to devnet,

Since you are working with Qt 4, you could use QVFB to develop the GUI at the right size on your desktop machine. As for the the depth, IIRC, you must build Qt with support for it.

Is your keypad seen like a keyboard from a device point of view ?

Hope it helps

BluTiGeS

Hi,

thank you for your response ;) and first help

Okay for the depth I could try to cross compile it again with the depth 1 flag, maybe it shows up correct after that.
Is there no direct way to scale it direct on the current embedded dev/fbo screen?
I have read with qvfb there is a flag -zoom, is this also available for /dev/fbo ?
Would be nice for demonstrating and get a feeling of the size.
The Keyboard will be seen as normal device, as far as I know at the moment.

Many Thanks for upcoming further help.

SGaist

You can set several depth IIRC
I don't remember of such an option
Then unless it gets a special name, you should see its input in your software

BluTiGeS

Hi,

thanks again for your response.

I have done a sample application with a OnScreen Navigation (up, down, left,right,enter).
But now I having problems to navigate on the Window.
I tried to use for each button a different Event in the regarding slot :

Mainwindow:

QKeyEvent *event = new QKeyEvent( QEvent::KeyPress, Qt::Key_Right, Qt::NoModifier);
QCoreApplication::postEvent (this, event);

Am I thinking wrong? or how can i use the virtual onscreen mini keypad to navigate on the Windows, Dialogs etc?

Many Thanks

SGaist

Why are you generating key events ? You should receive them from your keyboard in your application and then in your application handle them.

BluTiGeS

HI,

I am using a Touchpanel for demonstration purpose, but in fact later it will not have touch functionality.

So i have added 5 Buttons (touchable left,right etc.) and if i press on one of these buttons the GUI (seperate widget) should then for example scroll down, mark a button click a button if i use the virtual keys.

I handle the touch events to see which one was pressed (left right etc.) and then executing the regarding Key Event.

But nothing happens in the widget. I thought qt can handle that easily if i trigger the KeyEvent, but it seems not to do it like I hoped.

So how can i achieve a navigation with my tocuhbuttons which are simulating the final embedded config?

SGaist

You should rather make a virtual input panel like described in the "Input panel example". That would be more accurate with the final setup of your device

BluTiGeS

Is it possible with that input panel to navigate through the windows and pages ?

Because I need to handle all input's navigation s with a 5 keys pad.

Many thanks

BluTiGeS

Hi,

i found in the net some hint using the configure switch -D QT_KEYPAD_NAVIGATION and set the nav mode QApplication::setNavigationMode.

But if i try that approach I get setNavigationMode is not a member if QApplication.
Is this in anymore? I am using latest QT 5.4 creator and cross compile to embedded with 4.8.6 qmake target.

Please help me, i am getting confused here. Since I think i am not the only one who just has keypad for navigation.

Regards

SGaist

setNavigationMode is still there but requires QT_KEYPAD_NAVIGATION to be defined when when building Qt

BluTiGeS

HI,

i have set this flag for my cross compiled qmake configuration QT4.8.6.
So how to configure qt creator QT5.4.1 to handle this QT_KEYPAD_NAVIGATION?

Do i need to configue the sources for my Ubuntu ?
like ./configure -v -D QT_KEYPAD_NAVIGATION
make -j 4
sudo make install

?

will it then be recognized, as QApplication function?

Maybe this picture helps to understand which my target platform is similar to:
http://emsystech.de/wp-content/uploads/2012/09/raspi-lcd-1.jpg

Is Qt able to get interaction with input fields/combo boxes etc. and menu navigations with only these 5 buttons?

SGaist

Yes thats that but there's something puzzling me, why are you developing with Qt 5 on your desktop and run 4.8.6 on your device ?

BluTiGeS

Well I just downloaded the latest QT total package and that had QT 5.4.1.

I need to use 4.8.6 as cross target because the target is not really running with qt 5.4.1 it gives DBUS errors etc.
So I wanted to start keeping the working 4.8.6 as a base to go on.

So maybe I can configure qt 5.4.1 with this KEYPAD define and keep the configured cross 4.8.6 qmake?
Are you seeing any issue with this?

Or what would you suggest to get qt running on such a platform:
http://emsystech.de/wp-content/uploads/2012/09/raspi-lcd-1.jpg

with navigation, iputs etc? Have you already done such a project?

SGaist

I did, years ago and Qt wasn't even in it's 4 series

What exact errors are you getting with Qt 5 ?

In any case, if you have Qt 4 running properly, then use it also on your desktop to ensure you have the same behavior on both sides

BluTiGeS

Okay thats sound good, maybe I need to give qt5 a second try or use also qt4 on the desktop.

I am not a the system right now but as I have in mind starting the application with

./test -qpa linuxFB:/dev/fb0

and then i got the DBUS error. Maybe my cmdline is also wrong. QT5 cross compile was not plug and play for me.

Do you remember how you have realized inputs with this few buttons?

SGaist

The exact error messages would be useful. Just to rule out the obvious: do you have the dbus daemon running ?

The UI was written to be very keyboard friendly and had a lot thinking about focusing so as to make sense when moving from up to down and left to right. What kind of UI will that be ?

BluTiGeS

Okay, seems to be DBUS not running correctly:

./TestQTCross -platform linuxfb:fb"/dev/fb0"

QIconvCodec::convertToUnicode: using Latin-1 for conversion, iconv_open failed
QIconvCodec::convertFromUnicode: using Latin-1 for conversion, iconv_open failed
process 2302: D-Bus library appears to be incorrectly set up; failed to read machine uuid: Failed to open "/var/lib/dbus/machine-id": No such file or directory
See the manual page for dbus-uuidgen to correct this issue.
D-Bus not built with -rdynamic so unable to print a backtrace
Aborted (core dumped)

is the DBUS really needed for qt5 embedded? since it is not in 4.8?

SGaist

The DBus module is also included in the 4 series however AFAIK it should not be mandatory for the linuxfb plugin but you also have another problem with iconv_open. Are you using the same version of libraries on your target than the one used to build Qt 5 ?

BluTiGeS

Hi,
yes i am using the same ones.

The configure command looks as follows:

./configure -release -opensource -confirm-license -arch arm -xplatform linux-arm-gnueabi-g++ -no-icu -no-pch -prefix /usr/local/Trolltech/qt5 -skip qtwebkit-examples -skip qtwebkit

I have adapted the qmake.conf of the linux-arm-gnueabi-g++ to fit my cross compile toolchain.

Do you see any issue?