Mac Stringstream returns wrong output
-
The code as presented in the original post works in gcc like @Bugi said about it working in mingw. I tried the following to see if it made any difference:
QMAKE_CXXFLAGS += -std=c++98 QMAKE_CXXFLAGS += -std=c++11 QMAKE_CXXFLAGS += -std=c++14 QMAKE_CXXFLAGS += -std=c++17
I tested each separately, but they did not change the output at all. I get this on output:
22x^3+2x^2-1x^0
System I tested on:
Ubuntu 18.04 Linux
gcc/g++ 7.4.0
64 bit compileHope this helps you narrow it down.
-
I just installed clang 7 on Linux and compiled the program like this:
clang++7 main.cpp
This produced "a.out".
I ran this and it produced:22x^3+2x^2-1x^0
I don't know if clang is different on Linux than on MacOS though. I don't know what version you have either. If you can tell me the version I can see if that works.
-
But if i switch to relaease i get a random output evry time eks:
- 0x^-19887461000x^-19887461000x^-1988746100
- 0x^2068517450x^2068517450x^206851745
- 0x^8690926600x^8690926600x^869092660
This means that you are printing uninitialized variables somehow.
but don't know how to single stepping. or what to look for in the debug window...
https://doc.qt.io/qtcreator/creator-debug-mode.html
You need to look at value of poly[i].second before and after
stringstream >> poly[i].second;
line. Also look up value of p at this moment, and look at internal data fields of stringstream. If still unclear, put a breakpoint on that line, and press F11 to get as deep into implementation of stringstream as needed -
I am running Linux so it only took a couple of minutes to install clangs 3.9, 4.0, 5.0, 6.0, and 7.0. I then compiled and ran your code on all of those versions and it produced what it was supposed to produce (22x^3+2x^2-1x^0). So unless you have a really old version of clang my guess is something else is wrong. I have no clue what could be wrong, but my first inclination is to reinstall Qt completely. In my opinion there is nothing wrong with the code itself.
Edit: Then again, 6 other people are having the same problem. So no clue on what could be the issue. Sorry.
Edit 2: @Bugi what does your pro file look like?
-
@mranger90
I don't know if this is what you ment by intialization it in a diffrent way...
(by creating a double and a int to pass the values into instead.) But it made no difference.std::vector<std::pair<double, int> > readPolynomial(std::string& p) { std::vector<std::pair<double, int> > poly; std::stringstream ss(p); double coeff; int power; for (size_t i = 0 ;i < 3; i++) { ss >> coeff; ss.ignore(2); ss >> power; poly.push_back(std::make_pair(coeff,power)); } return poly; }
Images of this code in debug mode se folder debug_2
if you meant something else with your suggestion can you elaborate a little.The image of the first debug run with the origanal code is also the folder (link above) as debug_1 updatet with visible content of "poly"
And you're code sugesting with "std::pair<double, int > tpair" is also in the folder (link above) as debug_3
-
Ok, this is a head scratcher. As indicated by @fcarney I've run your code, as is on a couple of systems (ubuntu 18.04 with gcc 7.4) and Windows 10 with msvc 2017. And they both produce the expected output.
So the issue seems to be compiler or environment related. And the fact that debug/release builds produce different output seems to indicated that somewhere, something is not being initialized, but in your simple code that would be easy to spot.
The only other issue that pops out on visual inspection is using the variable named "stringstream" which I suppose could cause confusion with the type "stringstream", but one of your tests changes the name to "ss" so that is not the issue.
Try parsing the first parameter as an int instead of a double, or even as a float instead of double to see if that makes a difference. -
Be sure the stream's not corrupted:
std::stringstream ss(p); ss.exceptions(std::stringstream::failbit | std::stringstream::badbit); try { for (size_t i = 0 ;i < 3; i++) { ss >> coeff; ss.ignore(2); ss >> power; poly.push_back(std::make_pair(coeff,power)); } } catch (const std::exception & e) { std::cerr << e.what() << std::endl; throw; }
You'd need the appropriate headers too:
#include <exception> #include <iostream>
-
I don't think there are many opportunities to change the compiler on macOS. Since the installation settings come with XCode. Actually tried "this" before I started this thread. and had to format my entire pc and reinstall everything.
I treed to type " $ gcc --version " to answer you question. and don't know whether this is useful...
MY-MacBook-Air:~ bugi$ gcc --version Configured with: --prefix=/Applications/Xcode.app/Contents/Developer/usr --with-gxx-include-dir=/Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX10.14.sdk/usr/include/c++/4.2.1 Apple LLVM version 10.0.1 (clang-1001.0.46.4) Target: x86_64-apple-darwin18.6.0 Thread model: posix InstalledDir: Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin
I fund this .pro file in the project folder
TEMPLATE = app CONFIG += console c++11 CONFIG -= app_bundle CONFIG -= qt SOURCES += \ main.cpp HEADERS +=
I tried reinstalling the latest Qt Open Source version:
Under the instalion setup there is a step where you are installing components: where i have 2 options at this step.
1. is to install as. Qt 5.12.3 -> macOS :
This installation resultet in nothing working at all!
couldn't even compile with the auto-detected kit. Or correct it to something that worked.
So I uninstalled it again (Both time with the MaintenanceTool which removed all files from the system).
I then tried again this time with the other option under installing component.
2. which is to install as. Qt 5.12.2 -> macOS : I was then able to compile my projects again but it made no difference. It is still "0x^00x^00x^0" as output.I alså tried 3.th, 4.th, and a 5.th time.
3.th time with both option 1. and 2. simultaneously. this resultere in that nothing would compile. again with the auto-kit or any setting (qmake return 2)
The 4.th and 5.th time both time by uninstalling both Qt and XCode. And agin it was only possible to make the qt installation with component: Qt 5.12.2 -> macOS. able to compile any of my projects. still with the wrong output. "0x^00x^00x^0" -
Okay maybe we found something here ...
but since I still have very little code experience I don't know if it is something or not... Or for that matter what it means
Output:ios_base::clear: unspecified iostream_category error libc++abi.dylib: terminating with uncaught exception of type std::__1::ios_base::failure: ios_base::clear: unspecified iostream_category error Press <RETURN> to close this window...
It went directly to line 49: (throw) after line 39: (ss >> coeff;)
Se folder and Debug_4 for code and images. -
@Bugi said in Mac Stringstream returns wrong output:
I don't think there are many opportunities to change the compiler on macOS.
I think Python is the same way on MacOS.
Can you add an independent compiler? One that you can run from the command line? Not one that changes the entire system compiler. My Linux system has a standard gcc compiler installed, but I can install clang and it won't mess up everything else. That would at least give you a way to do your school work.
I still think the VM option with Linux on it may be your best option. I know you don't want to, but it will give you a lot more options. It will also give you experience in Linux if you don't already have that.
-
@fcarney
Agree and have begun to take baby steps with linux (ubunto).
I was dedcated windows user some years ago (before windows 8) and have worked on windows machines afterwards continued.
regarding my school work i have found a windows machine for the moment.
BUT. I am still detement to make it work on mac os. I'm really tired of hearing people say you can't be an engineer with a mac.and I'm really happy with my mac :(
And although I have a windows machine it doesn't help the others in my class with the same problem (mac user) -
@Bugi said in Mac Stringstream returns wrong output:
I'm really tired of hearing people say you can't be an engineer with a mac.
The guy I share an office with is an electrical engineer (30+ years), he is a good programmer, uses a Mac, but runs most of his analysis software and programming tools on a VM running Windows 10. I run Linux and use a VM to run Windows 10 for doing Windows development in Qt. Most of my time is in Linux though. So, there is nothing wrong with a Mac. However, no matter what you run, you will probably need a VM to run something else. Or your boss will make a decision that forces you to run a VM. Its just how it goes.
-
@Bugi said in Mac Stringstream returns wrong output:
Okay maybe we found something here ...
but since I still have very little code experience I don't know if it is something or not... Or for that matter what it meansIt means one of two things:
- You're reading past the end of stream.
- You're reading formatted input (the
>>
operators), which is not formatted according to the expectation; i.e. there's something wrong while reading from the stream.
-
just for grins...please replace std:stringtream with std::istringstream and retest. Since you are only using the stream for input, you should use the istream specialization intended for that purpose.
-
@Bugi said in Mac Stringstream returns wrong output:
ios_base::clear: unspecified iostream_category error libc++abi.dylib: terminating with uncaught exception of type std::__1::ios_base::failure: ios_base::clear: unspecified iostream_category error
Someone found a bug in clang's stringstream exception detection before (http://clang-developers.42468.n3.nabble.com/libc-ios-base-and-exceptions-td4038960.html ); it's quite possible that your compiler has a buggy implementation of stringstream. This would explain why everyone on this forum was unable to reproduce your issue, yet all 6 macOS users in your class have the same issue.
Unless you have a way to try a different compiler on your macOS, you'll have a hard time proving or disproving that the bug is in your compiler.
Does this exercise require you to use stringstream? If not, try a different way of parsing the string.
-
Anyway, in situations like this, it is useful to create minimal test cases to investigate the issue.
int main() { std::string pstr = "22x^3+2x^2-1x^0"; std::stringstream ss(pstr); double coeff = -42.0; ss >> coeff; std::cout << coeff << std::endl; }
What does this print for you? If it's the wrong value, what happens if you replace pstr with "22"?
-
@JKSH said in Mac Stringstream returns wrong output:
Unless you have a way to try a different compiler on your macOS, you'll have a hard time proving or disproving that the bug is in your compiler.
However, it would be wise to update Xcode to the latest available version before investigating further