how do i get amplitude levels of audio from audio buffer which contains char* data.

[NIvil Wilson]

sir,
the code is given below.how do i take the amplitude levels from _buffer.

format.setSampleRate(44100);
    format.setChannelCount(1);
    format.setSampleSize(24);
    format.setByteOrder(QAudioFormat::LittleEndian);
    format.setSampleType(QAudioFormat::SignedInt);
************************************************************************
QByteArray _buffer;
   QIODevice *device;
    _buffer= device->read(2000);
   char *data=_buffer.data();
  

[NIvil Wilson]

@SGaist
sir,
sir, thank you very much for the clue you give.i fixed the problem in the application and it works fine.The working code is given below.

i did the following steps to fix the problem.

• reduced the input volume by using QAudinput :: setVolume(0.009) function.
• converted the *data to to qint8 from uchar

  input_G->setVolume(0.009);
    xy_device = new XYSeriesIODevice(this,m_series);


xy_device->open(QIODevice::WriteOnly);

//if crash check m_series is null
    input_G->start(xy_device);

    }

qint64 XYSeriesIODevice::writeData(const char *data, qint64 maxSize)
{
    static const int resolution = 4;

    if (m_buffer.isEmpty()) {
        m_buffer.reserve(sampleCount);
        for (int i = 0; i < sampleCount; ++i)
            m_buffer.append(QPointF(i, 0));
    }

    int start = 0;
    const int availableSamples = int(maxSize) / resolution;
    if (availableSamples < sampleCount) {
        start = sampleCount - availableSamples;
        for (int s = 0; s < start; ++s)
            m_buffer[s].setY(m_buffer.at(s + availableSamples).y());
    }

    for (int s = start; s < sampleCount; ++s, data += resolution){
        qreal y=qreal(qint8(*data))/qreal(128);
            m_buffer[s].setY(y*.75);}

    m_series->replace(m_buffer);
    return (sampleCount - start) * resolution;
}

[SGaist]

Hi,

You need to go through the values of the buffer content and then calculate it.

[NIvil Wilson]

@SGaist
sir,
i used the code in audio example to depict audio data in qml chartview.it works fine on ubuntu desktop but on an android device it depicts data without any audio input. the code is given below and the screenshot of the application on both devices .

code_text
 static const int resolution = 4;
int sampleCount=2000;
     if (m_buffer.isEmpty()) {
         m_buffer.reserve(sampleCount);
         for (int i = 0; i < sampleCount; ++i)
             m_buffer.append(QPointF(i, 0));
     }

     int start = 0;
     const int availableSamples = int(len) / resolution;
     if (availableSamples < sampleCount) {
         start = sampleCount - availableSamples;
         for (int s = 0; s < start; ++s)
             m_buffer[s].setY(m_buffer.at(s + availableSamples).y());
     }

     for (int s = start; s < sampleCount; ++s, data += resolution)
         m_buffer[s].setY(qreal(uchar(*data) -128) / qreal(128));
qDebug()<<qreal(uchar(*data) -128) / qreal(128);
     m_series->replace(m_buffer);

qml part

code_text

                ChartView{
                    id:chart_view
                    width: page1.width
                    height: page1.height*.50

                    theme: ChartView.ChartThemeDark
                    property bool openGL: true
                       property bool openGLSupported: true
                       onOpenGLChanged: {
                           if (openGLSupported) {
                               series("audio signal").useOpenGL = openGL;

                           }
                       }

                    ValueAxis {
                         id: xAxis
                         min: 0
                         max: 2000
                         titleText: "samples"

                     }
                    ValueAxis {
                         id: yAxis
                         min: -1
                         max: 1
                     }

                    LineSeries{
                        name:"audio signal"
                        id: lineSeries1
                               axisX: xAxis
                               axisY: yAxis
                               useOpenGL: chart_view.openGL
                    }

                    Component.onCompleted: {
                        if (!series("audio signal").useOpenGL) {
                            openGLSupported = false
                            openGL = false
                        }
recorder.setSeries(chart_view.series(0));

                    }
                }


}

[SGaist]

Not knowing how you get the data in the first place, I can't say anything.

[NIvil Wilson]

@SGaist
sir the code is given below.

import QtQuick 2.15
import QtQuick.Window 2.15
import QtCharts 2.3
import Recorder 0.1

Window {
    width: 640
    height: 480
    visible: true
    title: qsTr("Hello World")

    Recorder{id:rec_model}

    ChartView {
        id:chart_view
        width: 400
        height: 300
        theme: ChartView.ChartThemeBrownSand
        antialiasing: true

        ValueAxis {
             id: xAxis
             min: 0
             max: 2000
             titleText: "samples"

         }
        ValueAxis {
             id: yAxis
             min: -1
             max: 1
         }

        LineSeries{
            name:"audio signal"
            id: lineSeries1
                   axisX: xAxis
                   axisY: yAxis
                  // useOpenGL: chart_view.openGL
        }



        Component.onCompleted: {
            rec_model.setSeries(chart_view.series(0));
        }
    }
}

#ifndef RECORDER_H
#define RECORDER_H

#include <QObject>
#include<QAudioInput>
#include<QAudioDeviceInfo>
#include<QAudioFormat>
#include<QXYSeries>
#include<QDebug>
#include<QAbstractSeries>
#include <QtCore/QPointF>
#include <QtCore/QVector>
#include<QAbstractSeries>
using namespace QtCharts;

using namespace std;


class Recorder : public QObject
{
    Q_OBJECT

public:
    explicit Recorder(QObject *parent = nullptr);
 static const int sampleCount = 2000;
public slots:
    void depict();
void setSeries(QAbstractSeries *value);

signals:
private:
   QIODevice* iodevice;

   QXYSeries *series;
    QAudioInput* audioinput;
    QVector<QPointF> _points;
     QAudioFormat format;



};

#endif // RECORDER_H

#include "recorder.h"
#include <QtCharts/QXYSeries>
Recorder::Recorder(QObject *parent) : QObject(parent)
{

       // Set up the desired format, for example:
       format.setSampleRate(8000);
       format.setChannelCount(1);
       format.setSampleSize(8);
       format.setCodec("audio/pcm");
       format.setByteOrder(QAudioFormat::LittleEndian);
       format.setSampleType(QAudioFormat::SignedInt);

       QAudioDeviceInfo info = QAudioDeviceInfo::defaultInputDevice();
       if (!info.isFormatSupported(format)) {
           qWarning() << "Default format not supported, trying to use the nearest.";
           format = info.nearestFormat(format);
       }

       if(format.isValid()){
           qDebug()<<"using nearest format"<<format;
           audioinput=new QAudioInput(format, this);
       }



if(audioinput->state()==QAudio::StoppedState){
    iodevice=audioinput->start();
    qDebug()<<audioinput->state();
    bool status=  iodevice->open(QIODevice::ReadOnly);
    qDebug()<<"iodevice status"<<status;

    if(status){
        connect(iodevice,SIGNAL(readyRead()),SLOT(depict()));
    }


}




}

void Recorder::depict()
{

  qint64 maxlen=2000;

  QByteArray _buffer;
  _buffer.resize(2000);
 maxlen=iodevice->read(_buffer.data(),maxlen);
 char* data=_buffer.data();

  if(maxlen>0){






static const int resolution = 4;

if (_points.isEmpty()) {
    _points.reserve(sampleCount);
    for (int i = 0; i < sampleCount; ++i)
        _points.append(QPointF(i, 0));
}

int start = 0;
const int availableSamples = int(maxlen) / resolution;
if (availableSamples < sampleCount) {
    start = sampleCount - availableSamples;
    for (int s = 0; s < start; ++s)
        _points[s].setY(_points.at(s + availableSamples).y());
}

for (int s = start; s < sampleCount; ++s, data +=1)
 _points[s].setY(qreal(uchar(*data) -128) / qreal(128));





series->replace(_points);

  }
}

void Recorder::setSeries(QAbstractSeries *value)
{
    if (value) {
       QXYSeries* xySeries = static_cast<QXYSeries*>(value);
       qDebug()<<xySeries->name();
        series=xySeries;}
}

[SGaist]

You do not use the format information for your computations.

[NIvil Wilson]

@SGaist said in how do i get amplitude levels of audio from audio buffer which contains char* data.:

You do not use the format information for your computations.

sir, i dont know how to calculate using the format.could you please tell me how do i do that?

[SGaist]

Your computation assumes that the format you got is the one you requested and use matching hard coded values. You should check what you actually got and then adapt the values.

[NIvil Wilson]

@SGaist
sir,
sir, thank you very much for the clue you give.i fixed the problem in the application and it works fine.The working code is given below.

i did the following steps to fix the problem.

• reduced the input volume by using QAudinput :: setVolume(0.009) function.
• converted the *data to to qint8 from uchar

  input_G->setVolume(0.009);
    xy_device = new XYSeriesIODevice(this,m_series);


xy_device->open(QIODevice::WriteOnly);

//if crash check m_series is null
    input_G->start(xy_device);

    }

qint64 XYSeriesIODevice::writeData(const char *data, qint64 maxSize)
{
    static const int resolution = 4;

    if (m_buffer.isEmpty()) {
        m_buffer.reserve(sampleCount);
        for (int i = 0; i < sampleCount; ++i)
            m_buffer.append(QPointF(i, 0));
    }

    int start = 0;
    const int availableSamples = int(maxSize) / resolution;
    if (availableSamples < sampleCount) {
        start = sampleCount - availableSamples;
        for (int s = 0; s < start; ++s)
            m_buffer[s].setY(m_buffer.at(s + availableSamples).y());
    }

    for (int s = start; s < sampleCount; ++s, data += resolution){
        qreal y=qreal(qint8(*data))/qreal(128);
            m_buffer[s].setY(y*.75);}

    m_series->replace(m_buffer);
    return (sampleCount - start) * resolution;
}