How we can read particular string/data from any device to print on particular LCD in qt?

[SGaist]

You still are passing the exact same input to all your widgets. It's not because one function is named updateTemperature and the other updateTemperature1 that they will parse your data to extract the correct value to show. That's your job.

Note that you are using pretty convoluted code to handle your serial port data. Use QByteArray to cumulate the data. There's no need for all these conversions you are doing.

[jsulm]

@Mohit-Tripathi You send exact same data to both functions:

Dialog::updateTemperature(dataBuffer);
Dialog::updateTemperature1(dataBuffer);

How is it supposed to show different values if you use same value for both?

[Pablo J. Rogina]

@Mohit-Tripathi it looks like you are somehow double posting your issue, since this is the same problem as you mention here. Again, it seems you need to define a protocol so you the contents of dataBuffer can tell you both the value and the component to update.

[Mohit Tripathi]

 void Dialog::serialReceived()
    {
       QStringList buffer_split;
        if(buffer_split.length()< 3){
            serialData = arduino->readAll();
            serialBuffer = serialBuffer + QString::fromStdString(serialData.toStdString());
            serialData.clear();
        }else{
            serialBuffer = "";
            qDebug() << buffer_split << "\n";
            Dialog::updateTemperature(dataBuffer[0]);
            Dialog::updateTemperature1(dataBuffer[1]);
        }

    }

    void Dialog::updateTemperature(QString sensor_reading)
    {
       ui->temp_lcdNumber_2->display(sensor_reading);
    }

    void Dialog::updateTemperature1(QString sensor_reading1)
    {
        ui->temp_lcdNumber_3->display(sensor_reading1);
    }


    void Dialog::on_pushButton_clicked()
    {
        QMessageBox::information(this,"Motor Controller","Write data");
        QString output1 = ui->lineEdit->text();
        //qDebug()<<output1;
        QString output2 = ui->lineEdit_2->text();
        if(arduino->isWritable())
        {
             //arduino->write();
           arduino->write(output1.toStdString().c_str());
           arduino->write(output2.toStdString().c_str());
             arduino->flush();
             arduino->waitForBytesWritten(100);
             qDebug()<<output1;
            qDebug()<<output2;
        }
    }

I am still getting the same problem.
I can write the data in arduino in form of string using push widget through Line Edit widget. I can read the data from arduino also. But, I can not print the data on LCD number widget. I am unable to print the particular string on particular LCD widget. I am getting the data1 for LCD number2 and data2 for LCD number1 but I want to read the data1 for LCD number1 and data1 for LCD number1 and sometime getting the data2 for both LCD widget.

Can I know why I am getting the wrong output for particular LCD widget?

[SGaist]

Hi,

Because as already written in another thread you are not handling the data from your serial port correctly. You should cumulate the data you get until you know you have enough then parse it and update your lcd widget accordingly.

[Mohit Tripathi]

@SGaist @jsulm @J-Hilk
The ardunio code is

String a[10];

void setup() 
{

Serial.begin(9600); // opens serial port, sets data rate to 9600 bps

}

void loop() {
if(Serial.available()>0)
{
  for(int i=0;i<2;i++)
  {
    a[i] = Serial.readString();
  }

  for(int i=0;i<2;i++)
  {
    Serial.println(a[i]);
  }
  Serial.flush();
}
}

I am getting the two strings while entering two string in arduino like "12" and "1" on ardunio IDE but why i am not getting the correct result on LCD widget in qt5 like "12" on LCD widget 1 and "1" on LCD widget 2. Please note that I entered the "12" in lineEdit and "1" lineEdit_2.

[J.Hilk]

@Mohit-Tripathi with the assumption, that all data arrives simultaneously at your QSerialPort you could try the following.

According to the ardunino docs, println appends with \r\n so you can use readLine on Qt's side:

void Dialog::serialReceived()
{
    arduino->waitForReadyRead(100);

   if(arduino->canReadLine()){
      QStringList myData;
       while(arduino->canReadLine()){
            char buf[1024];
            qint64 lineLength = file.readLine(buf, sizeof(buf));
            if (lineLength != -1) {
                  // the line is available in buf
                  myData.append(QString(buf));
            }else qDebug() << "Reading Line failed";
       }
       if(myData.size() >0)
           updatelcd1(myData.at(0);
       if(myData.size() >1)
          updatelcd2(myData.at(1));
   }else qDebug() << "Could not read lines";
}

[Mohit Tripathi]

@J.Hilk If I am using this code (according to your solution)

if(myData.size() >0)
       {
           updateLCD(myData.at(0));
       }
       else if(myData.size() >1)
       {
          updateLCD1(myData.at(1));
       }

I am still getting the same problem in LCD Widget. I am getting the both input on only one LCD widget.

If I am using the same function call for both. I am getting the same output on both LCD widget.

 if(myData.size() >0)
       {
           updateLCD(myData.at(0));
       }
       else if(myData.size() >1)
       {
          updateLCD(myData.at(1));
       }
void Dialog::updateLCD(QString sensor_reading)
{
   ui->temp_lcdNumber_2->display(sensor_reading);
  ui->temp_lcdNumber_3->display(sensor_reading);
}

I am getting the same problem always.

[J.Hilk]

@Mohit-Tripathi said in How we can read particular string/data from any device to print on particular LCD in qt?:

@J.Hilk If I am using this code (according to your solution)

if(myData.size() >0)
       {
           updateLCD(myData.at(0));
       }
       else if(myData.size() >1)
       {
          updateLCD1(myData.at(1));
       }

are you kidding me?
how is that code supposed to be executed? Im sure even the compiler will rationalize it away.

if myData is bigger than 0 updateLCD will be called and the else will never execute

if myData is noit bigger than 0 it can never bigger than 1

Theres a reason I omitted the else

[Mohit Tripathi]

@J.Hilk I am not kidding. I am getting the same problem when I started to do code. I am at beginner level in Qt. That's why I am facing the problem.
But, here if Data size is less than 0. It should print only one enter value, not both value on one LCD widget. But, It is printing the both value on one LCD widget.

[SGaist]

@Mohit-Tripathi said in How we can read particular string/data from any device to print on particular LCD in qt?:

void Dialog::updateLCD(QString sensor_reading)
{
ui->temp_lcdNumber_2->display(sensor_reading);
ui->temp_lcdNumber_3->display(sensor_reading);
}

As already explained several times: you are updating both temp_lcdNumber_2 and temp_lcdNumber_3 with the same value each time you call that function.

[Mohit Tripathi]

@SGaist
As per discussion above, I have defined that if I make two functions, I get both write values on one LCD. But, if I define one function :

void Dialog::updateLCD(QString sensor_reading)
{
ui->temp_lcdNumber_2->display(sensor_reading);
ui->temp_lcdNumber_3->display(sensor_reading);
}

I get the same value on both LCD.

But, my question was "how can I get the one input in one only LCD if we have multiple LCD widget?". I have mentioned in my comment as well as question.
I have used two different functions, same functions and two arrays also. Please go through my recent code in above comment.

[SGaist]

That's simple and what @J-Hilk showed in his example. Properly parse the data you receive and update each LCD separately.

[Mohit Tripathi]

@SGaist @jsulm @J-Hilk @Global-Moderators @Moderators @J.Hilk
Is this a right way to write the data of two textEdit using pushbutton. I think that I am storing both values in one string that's why I am getting the both values on one LCD widget.

void Dialog::on_pushButton_clicked()
{
    QString output1 = ui->lineEdit->text();
  //  qDebug()<<output1;
    QString output2 = ui->lineEdit_2->text();
   // qDebug()<<output2;
    if(arduino->isWritable())
    {
         arduino->write(output1.toStdString().c_str());
        arduino->flush();
         arduino->waitForBytesWritten(500);
         arduino->write(output2.toStdString().c_str());
         arduino->flush();
         arduino->waitForBytesWritten(500);
         qDebug()<<output1;
         qDebug()<<output2;
    }
}

[SGaist]

Don't @ the moderators unless you have an issue requiring moderation.

Depending on the content of your line edit, you can use toLatin1() or toUtf8() rather than making these two conversions.