QtSerialPort

kuzulis

bq. Thanks, I will digg on it! If you want some log files, welcome!

I'm try build on Qt5-beta1, all building is fine, without errors.

kuzulis

bq. I tried to build with MSVC 2010 ( qt 5.0.0) but another error:

QtSerialPort has nothing to do with this error.
If you looked closely compiler log then would see what Qt5 is required to build "perl.exe".

AttilaPethe

I installed perl, but now the error if I want to build for MSVC2010 is:
Could not find any sync.profile for your module!

The complete log:
22:03:34: Running steps for project src...
22:03:34: Starting: "C:\Qt_lib\5.0.0-beta2\msvc2010\bin\qmake.exe" C:\Qt_lib\qtserialport\src\src.pro -r -spec win32-msvc2010 "CONFIG+=debug" "CONFIG+=qml_debug"
Reading C:/Qt_lib/qtserialport/src/serialport/serialport.pro [C:/Qt_lib/qtserialport/src-build-Desktop_Qt_5_0_0_beta2_MSVC2010_32bit_SDK-Debug/serialport]
Could not find any sync.profile for your module!
Pass <module directory> to syncqt to sync your header files.
syncqt failed at C:\Qt_lib\5.0.0-beta2\msvc2010\bin\syncqt line 775.
Project MESSAGE: C:\Qt_lib\5.0.0-beta2\msvc2010\bin\syncqt.bat -module QtAddOnSerialPort -mkspecsdir C:\Qt_lib\5.0.0-beta2\msvc2010/mkspecs -outdir C:/Qt_lib/qtserialport
Project ERROR: Failed to run: C:\Qt_lib\5.0.0-beta2\msvc2010\bin\syncqt.bat -module QtAddOnSerialPort -mkspecsdir C:\Qt_lib\5.0.0-beta2\msvc2010/mkspecs -outdir C:/Qt_lib/qtserialport
22:03:34: The process "C:\Qt_lib\5.0.0-beta2\msvc2010\bin\qmake.exe" exited with code 3.
Error while building/deploying project src (target: Desktop Qt 5.0.0 beta2 MSVC2010 32bit (SDK))
When executing step 'qmake'

I can build and run QextSerialPort very well, but I want to compare the two libs (QextSerialPort and QtSerialPort) and choose one for a project...

Please give an idea how to build this QtSerialPort. I tried to copy sync.profile in several location but failed evry time. Thanks in advance!

israelins85

Why not put the translation here?

On Path where Qt was installed open the file: mkspecs\win32-g++\qmake.conf

There are 2 changes todo:

First find the line with:
CONFIG += qt warn_on release link_prl copy_dir_files debug_and_release debug_and_release_target precompile_header

and add dll like this:

CONFIG += qt warn_on release link_prl copy_dir_files debug_and_release debug_and_release_target precompile_header dll

second find the line with:
QMAKE_IDC = $$[QT_INSTALL_BINS]$${DIR_SEPARATOR}idc.exe
and put below:
QMAKE_RCC = $$[QT_INSTALL_BINS]$${DIR_SEPARATOR}rcc.exe

That was found "here":http://www.prog.org.ru/index.php?topic=23489.msg166069#msg166069.

kuzulis

2 AttilaPethe

I newly checked out the build QtSerialPort add-on with QtCreator 2.6 & Windows 7 x32 & MSVC 2010 compiler & Qt5-beta2-msvc2010.

All the compiled fine, just open qtserialport.pro from QtCreator and build.

Also try remove all *.user files and build directory and try build again.

2 israelins85

Thx.

AttilaPethe

Great! Now I managed to compile under MinGW. Thanks a lot. Congratulations for YOU.
But under msvc2010 steel have trouble: The whole log is here:

15:35:50: Running steps for project src...
15:35:50: Starting: "C:\Qt_lib\5.0.0-beta2\msvc2010\bin\qmake.exe" C:\Qt_lib\qtserialport\src\src.pro -r -spec win32-msvc2010
Reading C:/Qt_lib/qtserialport/src/serialport/serialport.pro [C:/Qt_lib/qtserialport/src-build-Desktop_Qt_5_0_0_beta2_MSVC2010_32bit_SDK-Release/serialport]
Could not find any sync.profile for your module!
Pass <module directory> to syncqt to sync your header files.
syncqt failed at C:\Qt_lib\5.0.0-beta2\msvc2010\bin\syncqt line 775.
Project MESSAGE: C:\Qt_lib\5.0.0-beta2\msvc2010\bin\syncqt.bat -module QtAddOnSerialPort -mkspecsdir C:\Qt_lib\5.0.0-beta2\msvc2010/mkspecs -outdir C:/Qt_lib/qtserialport
Project ERROR: Failed to run: C:\Qt_lib\5.0.0-beta2\msvc2010\bin\syncqt.bat -module QtAddOnSerialPort -mkspecsdir C:\Qt_lib\5.0.0-beta2\msvc2010/mkspecs -outdir C:/Qt_lib/qtserialport
15:35:50: The process "C:\Qt_lib\5.0.0-beta2\msvc2010\bin\qmake.exe" exited with code 3.
Error while building/deploying project src (target: Desktop Qt 5.0.0 beta2 MSVC2010 32bit (SDK))
When executing step 'qmake'

No more steps only the qmake. I checked sync.profile and it seems all right. No idea why is not found. Even I tryed to copy to several place but steel is unfound... I use W7Pro 64bit...

AttilaPethe

If I look to that line in syncqt:

if we have no $basedir we cannot be sure which sources you want, so die

die "Could not find any sync.profile for your module!\nPass <module directory> to syncqt to sync your header files.\nsyncqt failed" if (!$basedir);

But if we look closer we can see that:
$basedir = locateSyncProfile($out_basedir);
furthermore: our $out_basedir = getcwd();
And the Cwd, pathname of current working directory is specifyed automaticly by Qt in the project settings as C:\Qt_lib\qtserialport\src-build-Desktop_Qt_5_0_0_beta2_MSVC2010_32bit_SDK-Release.
Where can be the bug?
Perl fails to get the curent working directory name? About $basedir it says that: undefined value.

kuzulis

I do not know.

You have installed ActivePerl or another?

Because needed ActivePerl.

PS: I have successfully built Qt5-beta2 + QtCreator 2.6 + Microsoft SDK 7.1 and on Win7x64.

AttilaPethe

I have ActivePerl 5.16.1 Build 1601 (64-bit), Qt5-beta2 + QtCreator 2.6 + Microsoft SDK 7.0A and on Win7pro×64. I think the error is in perl or perl script. The script is executed, only $basedir remain undefined. I have no perl knowledge but I will dig it soon. The error is in lines:
our $out_basedir = getcwd();
$basedir = locateSyncProfile($out_basedir);
I will try to specify $basedir manually in perl script and see if getcwd() returns the working directory or not. But this is not a long term solution. (I mention again that in the project configuration the out directories are present.)

kuzulis

I do not acknowledge the problem.

I again checked the compilation with the environment similar as you:

ActivePerl 5.16.1 Build 1601 (64-bit),
Qt5-beta2 + QtCreator 2.6
Microsoft Visual Studio 2010 (SDK 7.0A)
Win7pro×64.

All compiled fine.

AttilaPethe

I compiled well under Qt5 but only after I specify manually the output directory in the qtsync script. I changed line 78 from
@our $out_basedir = getcwd();@

to

@our $out_basedir = "C:/myqtserialportlocation";@

After this the compilation went well.

Thanks for help!