Problems about Native build Qt5.7 on raspberry pi3
-
@jsulm
the "make" process only take more than 2 minutes too, the configure process is very long about 7 hours ... no error information -
@JiujiuTong configure takes 7 hours? And make only 2 minutes?! You're doing something wrong. Are you sure make step was successful?
-
@jsulm
yes, many make output: nothing to be done for "first"
no error infors
the interesting thing is:
the configure output summary :
building on : linux-g++ (arm ,cpu features: none detected)
building for :devices/linux-rpi3-g++ (arm, cpu features: neon)
so i thing -device linux-rpi3-g++ option is correct,
the steps on http://wiki.qt.io/Native_Build_of_Qt_5.4.1_on_a_Raspberry_Pi
may have missing some critical steps or my ENV is not right -
@JiujiuTong said in Problems about Native build Qt5.7 on raspberry pi3:
@jsulm
yes, many make output: nothing to be done for "first"
no error infors
the interesting thing is:
the configure output summary :
building on : linux-g++ (arm ,cpu features: none detected)
building for :devices/linux-rpi3-g++ (arm, cpu features: neon)
so i thing -device linux-rpi3-g++ option is correct,
the steps on http://wiki.qt.io/Native_Build_of_Qt_5.4.1_on_a_Raspberry_Pi
may have missing some critical steps or my ENV is not rightseems everything is fine , finish install with linux-rasp-pi2-g++
i will double confirm it @jsulm -
@JiujiuTong said in Problems about Native build Qt5.7 on raspberry pi3:
@JiujiuTong said in Problems about Native build Qt5.7 on raspberry pi3:
@jsulm
yes, many make output: nothing to be done for "first"
no error infors
the interesting thing is:
the configure output summary :
building on : linux-g++ (arm ,cpu features: none detected)
building for :devices/linux-rpi3-g++ (arm, cpu features: neon)
so i thing -device linux-rpi3-g++ option is correct,
the steps on http://wiki.qt.io/Native_Build_of_Qt_5.4.1_on_a_Raspberry_Pi
may have missing some critical steps or my ENV is not rightseems everything is fine , finish install with linux-rasp-pi2-g++
i will double confirm it @jsulmI finish the installation with -skip webengine option,
then later, i want to install qt-creator 4.2, i need to run qmake -r , it promps that unknown module, in the README, it seems require webengine module.should i reinstall without -skip webengine ? or the best way should be cross compiler... @jsulm -
@jsulm
i finished the installation, how to know it is built successfully,
i have install qt-creator(qt5.3.2), i remove it and link the /usr/bin/qmake to the /usr/local/qt5/bin/qmake,
current qmake -v show the correct version info.
how to know the qt5.7 is correct installed on rp3? thank you ! -
@JiujiuTong Where did you install it, /usr/local/qt5? You should have qmake and Qt libs there. Try to use your Qt to build a project.
You should not link /usr/bin/qmake to /usr/local/qt5/bin/qmake! In QtCreator you can add your Qt version selecting its qmake. -
@jsulm
i can not install qtcreator directly on rpi3 -
@JiujiuTong You can build an app without qtcreator:
/usr/local/qt5/bin/qmake make
-
@jsulm
ok it's installed properly,thank you !