how to read hex value data from text file and store into array?

jsulm

Read the file content in a QByteArray using QFile::readAll().
Then call split(',') on that byte array.
You will get a list of QByteArray like:

["0x09","0xFF","0xD5","0x3C","0x06","0x7C","0x0A"...]

Now you can loop over all the elements of the list and call QByteArray::fromHex(...).toInt() to convert from hex to integer.

JohanSolo

@jsulm said:

Read the file content in a QByteArray using QFile::readAll().
Then call split(',') on that byte array.

Nice idea, no need for regular expressions indeed!

sachin786

ok for now i done till this.
my file is 1.txt, which contains simply this "1A,2C,0A"

unsigned char temp[3]={0}
QByteArray bb("0x");
QByteArray aa;

QString line;
QFile file1(filename);
if(file1.open(QIODevice::ReadOnly | QIODevice::Text)){
line=file1.readAll();
QStringList strings2 = line.split(QRegExp("\W+"), QString::SkipEmptyParts);
int n = strings2.size();

    for(x=0;x<n;x++){
           qDebug() << strings2.at(x) << "  ";
           aa = strings2.at(x).toLocal8Bit();      // at this aa =1A first loop, and so on.
           bb=bb.append(aa);    // bb= 0x1A for first loop , and so on
           bb ="0x";                     // initialise 'bb'
           /*
            *
            * in this portion is there any way  i can save value of 'bb' to my unsigned    char  temp[ ]?
            *so that i can do something like temp[x]=bb ?? 
            */

           if(x==n) break;
          }               
     }

jsulm

It is not really clear what you want: do you want to store a character represented by the hex value or the integer value?
So, how should temp look after you store bb there?
What is this supposed to do?

bb=bb.append(aa);    // bb= 0x1A for first loop , and so on
bb ="0x";

you first assign a value and then overwrite it with "0x".
Why do you need 0x?

In my previous post I already suggested how to convert hex string to integer.

SGaist

From your latest text sample, what about:

QByteArray dataFromFile = file.readAll();
QByteArray aa = "0x" +  dataFromFile.replace(",", "");

But as @jsulm asked, what is your final goal with these data ?

sachin786

I have a file with hex values saved as hex.txt which has
0x04,0x2C,0x64,0x00,0xB6,0x03,0xFA,0x84,0x87,0x6A,0x74,0x18,0x01,0x64,0x79,0x13,0x09,0x6A,0xCB,0xED,0x3D,0x9C,0x79,0x88,0x49,0x4A,0x2E,0xE8,0x89,0x24,0xF7,0xDD,0x04,0xA9,0x09,0xE7,0xE5,0x14,0xF7,0x5B,0xC5,0x49,0x38,0x10,0xFA,0x5C,0xFA,0x99,0xC4,0x0D,0x74,0xE0,0x3A,0x45,0xE8,0x64,0xCC,0xBB,0x72,0x57,0x31,0x63,0xF9,0x7F,0x46,0x48,0xF4,0xE8,0x91,0x5B,0xF8,0xED,0x07,0x9B,0x09,0x07,0x0D,0x64,0xF7,0x64,0xC7,0x5A,0xB8,0x17,0xCD,0xBC,0x6A,0xA9,0xC3,0x9D,0xEF,0x96,0x9D,0x62,0xF5,0xDD,0x83,0xD9,0x45,0x0F,0x99,0x4B,0xF6,0x63,0x41,0x29,0x38,0xE0,0x4A,0xCD,0xF9,0x94,0xC3,0x1D,0xAE,0xB8,0x96,0x3D,0x69,0x82,0x8C,0xFF,0x29,0xF9,0x2A,0xF6,0x85,0x50,0x45,0x1A,0x7E,0xF8,0x26,0x66,0x86,0x43,0x48,0x4B,0x3E,0xF9,0x96,0xD4,0x6A,0x33,0xC3,0x6B,0x75,0xFD,0x29,0x95,0xAA,0x27,0xC4,0xBD,0xF7,0x0F,0x99,0x1D,0xEB,0x9C,0x84,0xFB,0x7B,0xF8,0x4D,0x3A,0xFA,0x12,0x43,0xC9,0x43,0x0F,0x66,0x52,0xF7,0x6F,0x87,0x4A,0x36,0xE9,0xD5,0x84,0x8B,0x9A,0x8B,0xFF,0xC1,0x0F,0x2D,0x25,0x8B,0x99,0xCE,0xFE,0xC3,0xFF,0x0E,0xC9,0xF8,0x88,0x83,0xD9,0x83,0xD8,0x5D,0x91,0xF5,0x76,0xC7,0x3A,0xF8,0xE0,0x86,0x71,0xF7,0x7C,0x04,0x3A,0xFA,0xD8,0x95,0x69,0x4B,0x8F,0xC5,0xFA,0xFB,0xEF,0xBD,0x19,0xF6,0x05,0xC6,0xB8,0x7B,0x16,0xD5,0x71,0xF6,0x7D,0x46,0xD7,0xB7,0xC0,0xE5,0x11,0xF7,0x75,0x04,0x4A,0x3A,0xE1,0x72,0xD9,0x4B,0x96,0x89,0xFF,0xFF,0xDF,0x82,0xF2,0xF4,0x65,0x44,0x3B,0xB8,0xF0,0xF9,0xF9,0x43,0x50,0xC4,0x9D,0xFE,0x37,0x62,0xB8,0xA7,0x88,0x43,0xE9,0xC1,0xEF,0xB5,0x50,0xF7,0x87,0x85,0x17,0x40,0xE8,0x01,0x98,0x4A,0x86,0xC7,0xF7,0xFF,0x0F,0x31,0x38,0x4A,0x0B,0x44,0x38,0x7E,0xF8,0x59,0xE8,0x49,0x8B,0xC3,0xD9,0xFF,0xEF,0x72,0xE0,0x4A,0x0C,0xC7,0x29,0x3E,0xF8,0x45,0x33,0x7C,0x1B,0x02,0xDA,0x3F,0xF8,0xB1,0xF8,0x45,0x80,0x44,0x19,0xBE,0xE0,0xD6,0xC8,0x45,0x04,0xC3,0xF9,0x05,0x1F,0xA1,0x6B,0x7C,0x94,0xC3,0xF7,0xFB,0x0F,0xA3,0x2F,0x3F,0x11,0x27,0x42,0xF7,0x44,0x1F,0x65,0x62,0x52,0x42,0x4A,0x34,0x22,0x13,0x21,0x54,0x18,0x22,0x85,0xFF,0x43,0x32,0xB8,0xA5,0xF7,0xFF,0x12,0xF2,0x1F,0xC1,0x68,0x48,0x86,0x2F,0x22,0xF8,0x26,0x23,0xFF,0x0F,0xF6,0xFF,0x3F,0x77,0x45,0x1F,0x1F,0x17,0xF4,0x74,0x34,0x36,0x73,0x3F,0x26,0xF2,0x1F,0x6F,0x92,0x41,0xF7,0xFF,0x77,0xA6,0xF4,0x8F,0x4F,0xF4,0xF9,0x33,0x75,0x32,0xF4,0xF1,0xF8,0xF1,0x1F,0x8F,0x46,0x36,0x06,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xA2,0xE4
total is 498 bytes

2)Now I need to copy this 498 bytes values (same to same) to below array at a particular position starting from [8] to [498]

given the array in that array i want to store above text file data.....
unsigned char hex[508]={
0x5A,0xA5,0x0B,0x01,0xF4,0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00};

jsulm

temp[x]=static_cast<unsigned char>(QByteArray::fromHex(bb).toInt());

kshegunov

@sachin786
Judging from your C code you don't have a text file at all but rather a binary file where the characters are saved. Assuming this is the case you read the data into a byte array (as already suggested) and just copy the relevant parts into a new byte array.

QFile inputFile("myFileName.txt", QFile::ReadOnly);
if (!inputFile.open())
    ; //< Handle open errors here

QByteArray binary = inputFile.readAll();   //< binary contains the file now

unsigned char hex[508]; //< This is your array

qint32 start = 4, size = 498;
::memcpy(hex + start, binary.constData(), size); //< Copy the binary data

If, on the other hand, you indeed have a text file as shown in the above post, then you read the text into a string (as already suggested yet again) and split by the comma separator. You then convert the resulting strings into one byte integers and copy them over to the new byte array.

QFile inputFile("myFileName.txt", QFile::ReadOnly | QFile::Text);
if (!inputFile.open())
    ; //< Handle open errors here

QTextStream in(&inputFile);
QString text = in.readAll();   //< text contains the file now

QStringList bytes = text.split(',');  //< Split the text into bytes

QByteArray binary; //< Prepare the byte array
binary.reserve(bytes.size());

bool ok = true;
foreach (QString byte, bytes)  {
    unsigned char hexChar = byte.toInt(&ok, 0); //< Convert string to integer according to C-style rules
    if (!ok)
        ; //< Error while converting, handle accordingly

    binary.append(hexChar); //< Append the char to the byte array
}

// And finally, copy the data:

unsigned char hex[508]; //< This is your array

qint32 start = 4, size = 498;
::memcpy(hex + start, binary.constData(), size); //< Copy the binary data

EDIT: Alternatively the last snippet could be modified so you can save the data directly while converting:

QFile inputFile("myFileName.txt", QFile::ReadOnly | QFile::Text);
if (!inputFile.open())
    ; //< Handle open errors here

QTextStream in(&inputFile);
QString text = in.readAll();   //< text contains the file now

QStringList bytes = text.split(',');  //< Split the text into bytes

bool ok = true;

qint32 start = 4, size = 498;
for (qint32 i = 0, bytesNumber = bytes.size(), offset = start; i < bytesNumber && i < size; i++, offset++)  {
    unsigned char hexChar = byte.toInt(&ok, 0); //< Convert string to integer according to C-style rules
    if (!ok)
        ; //< Error while converting, handle accordingly

    hex[offset] = hexChar;
}

sachin786

@kshegunov thanks for reply...
#include "qtquick1applicationviewer.h"
#include <QApplication>
#include <QtCore>
#include <QDebug>
int main(int argc, char *argv[])
{
QApplication app(argc, argv);

QtQuick1ApplicationViewer viewer;
viewer.addImportPath(QLatin1String("modules"));
viewer.setOrientation(QtQuick1ApplicationViewer::ScreenOrientationAuto);
viewer.setMainQmlFile(QLatin1String("qrc:/main.qml"));
viewer.showExpanded();


bool ok = true;
QString filename="/home/anas/myQtApp/sachin2hex/hex.txt";
QFile inputFile(filename);
QByteArray binary; //< Prepare the byte array
QStringList bytes;
int i=0;

unsigned char hex[508]={0x5A,0xA5,0x0B,0x01,0xF4,0x01,0x00,0x00,....position from[4] to [498] bytes data ///  << same as mention above

if(inputFile.open(QIODevice::ReadOnly | QIODevice::Text)){
    QTextStream in(&inputFile);
    QString text = in.readAll();   //< text contains the file now

    bytes = text.split(',');
    qDebug() << "bytes :: " << bytes;

    binary.reserve(bytes.size());

    foreach (QString byte, bytes)  {
        unsigned char hexChar = byte.toInt(&ok, 0); //< Convert string to integer according to C-style rules
        if (!ok)
            ; //< Error while converting, handle accordingly

        binary.append(hexChar); //< Append the char to the byte array
    }

    qint32 start = 4, size = 498;
    ::memcpy(hex + start, binary.constData(), size); //< Copy the binary data


}

for(i=0;i<508;i++) printf("%c", hex[i]);

return app.exec();

}

it print garbage for hex[ ]......

kshegunov

@sachin786

it print garbage for hex[ ]......

What do you expect to be printed exactly? The data is binary so any of the elements that can't be displayed will be printed as gibberish ... 0x01, 0x00 are non-printable characters, so you'd see (depending on the platform) squares or other strange symbols, this doesn't necessarily mean the data is corrupted, only that it's interpreted in a erroneous way.