Unix signals and QCharts cause application blocking

[tovax]

If there is no sleep, the socket can work at any fast speed, which I have been testing for some time ago. Now I want to refresh qcharts in timerEvent, which caused the application to freeze.

[tovax]

Perform a write test on the socketpair. Each time, 278 (0~277) pieces of data are written and then frozen.

int cnt = 0;
while (true) {
    char a = 1;
    ::write(mSocketFd[0], &a, sizeof(a));
    qDebug() << __FUNCTION__ << cnt++;
}

debug output:

PanelDriver 0
PanelDriver 1
PanelDriver 2
PanelDriver 3
... ... ...
PanelDriver 273
PanelDriver 274
PanelDriver 275
PanelDriver 276
PanelDriver 277

[tovax]

It may not be caused by the socket write buffer being full. It seems that after the socket was written, the activate() signal was not triggered, causing the socket to be unable to read in time, and then causing the socket write buffer to be full.

However, I have already processed all events in timerEvent, and I don't know why there is still a freeze. More strangely, from the debug output information, it can be seen that the exception occurred at the moment the timerEvent returned.

void PanelDriver::unixSignalHandler(int)
{
    qDebug() << __FUNCTION__ << 0;
    char a = 1;
    ::write(mSocketFd[0], &a, sizeof(a));
    mBufferCounter++;
    qDebug() << __FUNCTION__ << 1 << mBufferCounter;
}

void PanelDriver::qtSignalHandler()
{
    mSocketNotifier->setEnabled(false);

    char tmp;
    ::read(mSocketFd[1], &tmp, sizeof(tmp));
    mBufferCounter--;
    qDebug() << __FUNCTION__ << mBufferCounter;

    mSocketNotifier->setEnabled(true);
}

void JCDemoDriver::timerEvent(QTimerEvent *event)
{
    if (event->timerId() != mTimerId) {
        qDebug() << __FUNCTION__ << __LINE__;
        QWidget::timerEvent(event);
        return;
    }

    static int cnt = 0;
#if 0
    qDebug() << __FUNCTION__ << cnt++;
#else
    label->setText(QString::number(cnt++));
#endif
    int ms = 0;
    do {
        QThread::msleep(1);
        QCoreApplication::processEvents();
        if (ms % 10 == 0)
            qDebug() << __FUNCTION__ << ms;
    } while ((ms++) < 100);
    qDebug() << __FUNCTION__ << QTime::currentTime();
}

debug output:

timerEvent 0
unixSignalHandler 0
unixSignalHandler 1 1
qtSignalHandler 0
timerEvent 10
unixSignalHandler 0
unixSignalHandler 1 1
qtSignalHandler 0
unixSignalHandler 0
unixSignalHandler 1 1
qtSignalHandler 0
timerEvent 20
unixSignalHandler 0
unixSignalHandler 1 1
qtSignalHandler 0
timerEvent 30
unixSignalHandler 0
unixSignalHandler 1 1
qtSignalHandler 0
timerEvent 40
unixSignalHandler 0
unixSignalHandler 1 1
qtSignalHandler 0
timerEvent 50
unixSignalHandler 0
unixSignalHandler 1 1
qtSignalHandler 0
timerEvent 60
unixSignalHandler 0
unixSignalHandler 1 1
qtSignalHandler 0
unixSignalHandler 0
unixSignalHandler 1 1
qtSignalHandler 0
timerEvent 70
unixSignalHandler 0
unixSignalHandler 1 1
qtSignalHandler 0
timerEvent 80
unixSignalHandler 0
unixSignalHandler 1 1
qtSignalHandler 0
timerEvent 90
unixSignalHandler 0
unixSignalHandler 1 1
qtSignalHandler 0
timerEvent 100
timerEvent QTime("11:12:00.360")
unixSignalHandler 0
unixSignalHandler 1 1
unixSignalHandler 0
unixSignalHandler 1 2
unixSignalHandler 0
unixSignalHandler 1 3
unixSignalHandler 0
unixSignalHandler 1 4
unixSignalHandler 0
unixSignalHandler 1 5
unixSignalHandler 0
unixSignalHandler 1 6
unixSignalHandler 0
unixSignalHandler 1 7
unixSignalHandler 0
unixSignalHandler 1 8
unixSignalHandler 0
unixSignalHandler 1 9
unixSignalHandler 0
unixSignalHandler 1 10
... ... ... ... ... ... ...
unixSignalHandler 0
unixSignalHandler 1 273
unixSignalHandler 0
unixSignalHandler 1 274
unixSignalHandler 0
unixSignalHandler 1 275
unixSignalHandler 0
unixSignalHandler 1 276
unixSignalHandler 0
unixSignalHandler 1 277
unixSignalHandler 0
unixSignalHandler 1 278
unixSignalHandler 0
unixSignalHandler 0
unixSignalHandler 0
unixSignalHandler 0

[tovax]

It can be determined that the freezing of the application has nothing to do with the reading and writing of the socket. Because just setting the unix signal handler can also cause freezing.

[tovax]

@tovax said in Unix signals and QCharts cause application blocking:

It can be determined that the freezing of the application has nothing to do with the reading and writing of the socket. Because just setting the unix signal handler can also cause freezing.

After making unixSignalHandler() reentrant, socket write blocking is likely to be the main cause of freezing. I am testing and will update the github code in 12 hours.

[JonB]

@tovax said in Unix signals and QCharts cause application blocking:

socket write blocking is likely to be the main cause of freezing

Sockets do have a "backlog queue" for writes issued, just like for file writes. However you are only talking about maybe 5 separate 1 byte writes, I'd be surprised if that hit it. Unless there is a "special case" for needing the read from the first write before further writes go through.

[tovax]

@JonB
After 15 hours of testing, running socketpair in the thread pool will not freeze the application (git commit id: 74d295).

[tovax]

@JonB said in Unix signals and QCharts cause application blocking:

@tovax said in Unix signals and QCharts cause application blocking:

socket write blocking is likely to be the main cause of freezing

Sockets do have a "backlog queue" for writes issued, just like for file writes. However you are only talking about maybe 5 separate 1 byte writes, I'd be surprised if that hit it. Unless there is a "special case" for needing the read from the first write before further writes go through.

From the test results of these two days, I also believe that socket write blocking is not the real cause, but a result of other issues.

[tovax]

@tovax said in Unix signals and QCharts cause application blocking:

@JonB
After 15 hours of testing, running socketpair in the thread pool will not freeze the application (git commit id: 74d295).

Although using thread pools can temporarily solve this problem, I still don't know what the real reason is. Why does socketpair cause the application to freeze in the main thread. My feeling is that when a timerEvent returns, due to the fact that the sleep time is greater than the timing period, the application's handling of other events (such as unixSignalHandler) has any particularity. But I don't know how to test this assumption.
The reason I'm assuming this is that when executing QCoreApplication:: processEvents() while sleeping in timerEvent, there seems to be no problem. When socketpair is running in the main thread, the following test code in timerEvent)() can produce completely different results.

#if 1
    /* Will not freeze */
    int ms = 0;
    do {
        QThread::msleep(1);
        QCoreApplication::processEvents();
        if (ms % 20 == 0)
            qDebug() << __FUNCTION__ << ms;
    } while ((ms++) < 200);
#else
    /* Causes the application to freeze */
    QThread::msleep(200);
#endif