A few design questions...
-
It looks as if you still have the Q_PROPERTY() declaration in your soc.h file but that you have already removed all of the other related functionality - the setter, getter and notifier signal. Is that correct?
Make sure you rhave no Q_PROPERTY() stuff left in the soc.h file.
-
Good eye. I removed them, and got rid of that error. Now, I'm getting:
@Undefined symbols:
"vtable for DemodShaperFilter", referenced from:
__ZTV17DemodShaperFilter$non_lazy_ptr in DemodShaperFilter.o
(maybe you meant: __ZTV17DemodShaperFilter$non_lazy_ptr)
"DemodShaperFilter::shaperOutIChanged()", referenced from:
DemodShaperFilter::setShaperOutI(long) in DemodShaperFilter.o
@This is because I didn't change my connect commands in the widget, isn't it? Now, I have to think about this...the filter object isn't visible to the widget.
-
That type of error often occurs when you forget to:
- include the Q_OBJECT macro (which I see you have) or
- forget to add the header file to the HEADERS section of the .pro file or
- forget to re-run qmake after doing so.
Look in your build dir and see if you have a moc_demodshaperfilter.cpp being generated as part of the build process.
-
The header file is in the .pro file.
I'm pretty sure qmake is run automatically as part of my build.
And no, the mod_demodshaperfilter.cpp file isn't there.
But, I think my problem is a bit more fundamental, isn't it? When we configured this originally, we set it up so that the Soc class was the "interface" to the UI. Now, though, I want to move the UI logic into the filter class, but...I don't create a new instance of the filter in widget like I do the Soc.
I'd like the Soc class to still contain the filter (and other) class, but I'd prefer to move the UI part of the exercise closer to the actual data. The element we chose for this demonstration is part of the filter class, not the Soc.
-
No, the lack of moc_demodshaperfiler.cpp is the entire problem here (well the linker unresolved symbols error anyway). Can you post your .pro file please and try doing
@
make distclean
qmake -r
make
@and post the output of the qmake and make steps please.
With respect to exposing your DemodShaperFilter object and it's properties, that is simple. Just provide a function on your Soc class that returns a pointer to the contained DemodShaperFilter. Once you have the pointer available to your widget or qml scene then you can proceed just like we did before.
-
OK, here's the .pro file:
@######################################################################
Automatically generated by qmake (2.01a) Mon Mar 28 17:09:16 2011
######################################################################
TEMPLATE = app
TARGET =
DEPENDPATH += . headers src
INCLUDEPATH += . headersAPP_QML_FILES.files = DemodShaperFilter.qml
APP_QML_FILES.path = Contents/MacOS
QMAKE_BUNDLE_DATA += APP_QML_FILESQT += core gui declarative
Input
HEADERS +=
headers/clock.h
headers/DemodShaperFilter.h
headers/globals.h
headers/register_offsets.h
headers/Soc.h
headers/SocReg.h
headers/widget.h
headers/GenericCell.h
headers/DemodCicTuner.h
headers/SystolicFilter.h
headers/modpredist.h
headers/Nco.h
headers/nyquist.h
headers/nyquistcell.h
headers/modshaperfilter.h
headers/modciccomb.h
headers/modciccombstage.h
headers/socreg64.h
SOURCES +=
src/clock.cpp
src/DemodShaperFilter.cpp
src/filestuff.cpp
src/globals.cpp
src/main.cpp
src/Soc.cpp
src/SocReg.cpp
src/widget.cpp
src/GenericCell.cpp
src/DemodCicTuner.cpp
src/SystolicFilter.cpp
src/modpredist.cpp
src/nco.cpp
src/nyquist.cpp
src/nyquistcell.cpp
src/modshaperfilter.cpp
src/modciccomb.cpp
src/modciccombstage.cpp
src/socreg64.cppFORMS +=
widget.uiOTHER_FILES +=
DemodShaperFilter.qmlRESOURCES +=
simple.qrc
@Those commands you posted are from the shell, right? I got this error on the make command:
bq. make: *** No rule to make target `distclean'. Stop.
-
OK, I did it from Creator. "Run qmake" returned this:
@Running build steps for project simulatorGUI...
Starting: "/usr/bin/qmake" /Users/mzimmers/wideband/SoC simulator/simulatorGUI/simulatorGUI.pro -r -spec macx-g++ QMLJSDEBUGGER_PATH=/Developer/Applications/Qt/Qt Creator.app/Contents/Resources/qml/qmljsdebugger
The process "/usr/bin/qmake" exited normally.@And the build returned a whole bunch of stuff that I won't bother putting here (unless you really want it), but it did build successfully this time. And I checked the build directory, and I now have files for the filter there.
Now, in the UI, the value displays as "undefined." And, I'm getting a couple run-time errors about "no such signal." One is on this line (in soc.cpp):
@ connect (this, SIGNAL(shaperOutIChanged()), this, SIGNAL(shaperOutIStringChanged()));
@And the other is (in widget.cpp):
@ connect (soc, SIGNAL(shaperOutIChanged()), this, SLOT(updateShaperOutI()));
@ -
OK. For some reason then the build system had not noticed that qmake needed to be re-run. But at least it is fixed now.
For the signals...
The first connect statement should now be moved into the DemodShaperFilter class since that is where we have all of the Qt property stuff now.
The second statement should be changed to something like this:
@
connect (soc->demodShaperFilter(), SIGNAL(shaperOutIChanged()), this, SLOT(updateShaperOutI()));
@where you need to add:
@
DemodShaperFilter* demodShaperFilter() const { return m_demodShaperFilter; }
@to your Soc class. Note that I have used "m_demodShaperFilter" but I have not seen your Soc.h header file so you'll have to replace that with whatever you called your pointer to the DemodShaperFilter object.
That should remove those runtime warnings.
Incidentally, I find it useful to run with the environment variable QT_FATAL_WARNINGS=1 set. With that in place any runtiem warnings form Qt will cause your app to abort at that point which the debugger will catch so that you can inspect the stack trace. You can set the above in the Qt-Creator project settings under the RunTime Configuration tab.
-
OK. I'd already copied the first connect into the DSF, but hadn't removed it from the Soc. Now done.
About the second one: something doesn't look right with that function definition. Either the type or the return value needs to be changed to agree with the other...
EDIT: also, the "const" was causing the compiler to beef, so I removed it.
And, at runtime, I now get this error:
@qrc:/DemodShaperFilter.qml:15:2: QML Connections: Cannot assign to non-existent property "onShaperOutIChanged"@
I didn't change my qml file; here it is:
@import QtQuick 1.0
Rectangle {
id: myRect
width: 300
height: 100
color: "#808080"Text {
text: "shaperOutI = " + soc.shaperOutIString;
font.pointSize: 20
anchors.centerIn: parent
}Connections {
target: soc
onShaperOutIChanged: {
if (myRect.color == "#808080")
myRect.color = "#c0c0c0"
else
myRect.color = "#808080"
}
}
}@
Do I change the target from soc to something else (like the DSF)?
-
What about the part where you expose the object to the QML context? Also can you show how you get the pointer to the DemodShaperFilter object from the Soc object please? You mentioned something about not being able to use const or a pointer or something there?
-
The Soc class has a public function to return the address of the DSF object:
@ DemodShaperFilter* demodShaperFilter() { return &filter; }
@I'm not sure I remember "exposing" the DSF to QML. In my .qml file, there's a Connections block:
@ Connections {
target: soc
onShaperOutIChanged: {
if (myRect.color == "#808080")
myRect.color = "#c0c0c0"
else
myRect.color = "#808080"
}
}
@But I didn't see any code in my Soc class that tied the object to QML.
-
Somewhere we had something like:
@
view->rootContext->setContextProperty( m_soc, "soc" );
@which should now become something like:
@
view->rootContext->setContextProperty( m_soc->demodSHaperFilter, "dsf" );
@then in your QML scene replace all references of "soc" to "dsf".
-
Oh! That's in the widget constructor:
@Widget::Widget(QWidget *parent) :
QWidget(parent),
ui(new Ui::Widget),
m_timer(new QTimer(this)),
soc(new Soc(this))
{
ui->setupUi(this);connect (m_timer, SIGNAL(timeout()), soc, SLOT(runOneCycle()));
connect (soc->demodShaperFilter(), SIGNAL(shaperOutIChanged()), this, SLOT(updateShaperOutI()));
QDeclarativeView* view = ui->declarativeView;
view->rootContext()->setContextProperty("soc", soc);
view->setSource(QUrl("qrc:/DemodShaperFilter.qml"));m_timer->start(200); // 200 ms delay between cycles (for now)
}
@And, by "QML scene," you're referring to the .qml file?
-
-
OK, we're getting somewhere. I no longer get the error message at startup, and the QML window now comes up with the correct initial value of the variable. But...it's not updating. I have this line in my cycle loop for the object:
@ emit shaperOutIChanged();
@Which I believe should correspond with this line in my DSF constructor:
@ connect (this, SIGNAL(shaperOutIChanged()), this, SIGNAL(shaperOutIStringChanged()));
@So, I'm not sure what's missing.
Also, I'm confused about something: why is it we're still using some Soc functions for our QML processing?
@ ui->setupUi(this);connect (m_timer, SIGNAL(timeout()), soc, SLOT(runOneCycle()));
connect (soc->demodShaperFilter(), SIGNAL(shaperOutIChanged()), this, SLOT(updateShaperOutI()));
QDeclarativeView* view = ui->declarativeView;
view->rootContext()->setContextProperty("dsf", soc->demodShaperFilter());
view->setSource(QUrl("qrc:/DemodShaperFilter.qml"));m_timer->start(200); // 200 ms delay between cycles (for now)
@Thanks.
-
Where do you emit the shaperOutIChanged() signal? Can you post that snippet of code please? Have you run it in a debugger to make sure that emit is actually called? Do you get any runtime warnings on the console output?
Can you also post the qml file where you use this property please - although it sounds as if the QML is correct since you get an intiial value. Just sounds like the signal is not being emitted correctly which would trigger the QML engine to update the displayed value.
The only reason we are referring to the soc object is that it is the only way we can get at the pointer to the DemodShaperFilter object. Are you using it anywhere else in relation to displaying stuff in the GUI?
