Help U-Boot for my board arm PNX8473

[Cent0]

Re: [Solved]How to build qt-everywhere-opensource-src-4.8.0 with webkit?

Hello nice for meet to this group
I need help for study and compiling any U-Boot file binary for inizialize my machine .
Pnx8473 arm
Online i have found only one link,talk for box "prismcube recovery".this boot charge correct to my CPU but not inizialize USB.the sure the hardware not are the same.
If needed other detail for my hardware for any help
Thank s

Picture device hardware
![alt text](https://ibb.co/S3Q9C79
https://ibb.co/thQS3D5
https://ibb.co/X8bcBjG
https://ibb.co/yXS0zg4
https://ibb.co/jMGpg9c
https://ibb.co/YLxV9PY
https://ibb.co/Zc9j86q)

[SGaist]

Hi and welcome to devnet,

You need to contact the UBoot folks directly for your issue.

[Cent0]

Thank you for accept in the forum
@SGaist UBoot folks? How is? Pls if nave time for me.
Thank you

[SGaist]

@Cent0 yes, the people maintaining it. Check them on the official GitLab.

[Cent0]

@SGaist I found some things on github. but I still can't find the source code of the pnx8473 I should have a pinout to then configure the ram and access the usb drive to start the installation setup. Do you you help me?I didn't understand how to compile which software to use.

[Cent0]

@SGaist https://easyupload.io/x7d7cf
this is original flash dump boot spi MX25L6406E 64Mbit for my pnx8473 board
link is valid for 30 day

[SGaist]

Again: contact the U-Boot folks.
This is a Qt forum and I don't own that board.

[Cent0]

@SGaist hello thank you for your time...
again to boot my device i have booted with 9600baud
in the screen we have consolle :D

the start have inital speed to 115200
after booting k1 and k2 the speed change to 9600 :D

https://ibb.co/rFvhK8V
https://ibb.co/dpnwCq4

and have found consolle and qt is installed in my device ?

[Cent0]

@Cent0
DMESG
https://pastebin.com/NMrF1bqc