How to pass a value from one class to another where each class is on different file

JonB

@john_hobbyist said in How to pass a value from one class to another where each class is on different file:

where the value sent from class_1 is stored until I press BT2, and then class_2 get the value

That is your problem to code! The answer is probably to store that value received from class_1 as a member variable in class_2. Then the instance of class_2 has it in its self.some_variable.

john_hobbyist

@JonB said in How to pass a value from one class to another where each class is on different file:

@john_hobbyist said in How to pass a value from one class to another where each class is on different file:

where the value sent from class_1 is stored until I press BT2, and then class_2 get the value

That is your problem to code! The answer is probably to store that value received from class_1 as a member variable in class_2. Then the instance of class_2 has it in its self.some_variable.

How I do that???

JonB

@john_hobbyist
This is so basic Python I don't know what to say. class_2_instance.some_variable = class_1_instance.a_variable ultimately, but depends where you put it, e.g. this example would be from somewhere which has access to class_2_instance and class_1_instance. Would be different from somewhere else (e.g. inside class_1 or class_2, but that is the principle. It's just member variables.

john_hobbyist

@JonB said in How to pass a value from one class to another where each class is on different file:

@john_hobbyist
This is so basic Python I don't know what to say. class_2_instance.some_variable = class_1_instance.a_variable ultimately, but depends where you put it, e.g. this example would be from somewhere which has access to class_2_instance and class_1_instance. Would be different from somewhere else (e.g. inside class_1 or class_2, but that is the principle. It's just member variables.

Thank you! I think I have tried that, I mean you have to call the class somewhere in order to get the values, right? But what I face is not the common python code (it is PyQt5 python code)...because each class is called when I press each button...

JonB

@john_hobbyist
My friend, your understanding of "classes" and "instances" is all over the place...! ;-)

It's hard to help you because you do not explain where you create your instances of what and where you keep references around. It's not a PyQt5 issue, and yes I do understand both PyQt & Python :)

Somewhere you must create instances of your two classes. But I don't know where/how you do that....

Let's take a possible example related to your situation. Let's say your class_1 and class_2 are "windows" or "widgets" or "dialogs", e.g. derived from QWidget. And let's say you create the instances from a MainWindow class. Then you might have something like this:

# in `MainWindow` class, somewhere
self.window1 = class_1()
self.window2 = class_2()

# connect the signal raised from `class_1` with its `var_1` parameter
# to call the slot in `class_2` with that value as a parameter
self.window1.button_clicked.connect(self.window2.on_window1_button_clicked)


# in `class_1` class, somewhere
# you must create your own "PyQt signal" for the ` self.button_clicked_signal` we are going to `emit` below
# you must look up the PyQt5 syntax for that, it is *something* like (as a class variable):
pyqtSignal(button_clicked_signal)

# connect the Qt `QPushButton.clicked()` signal to `self.on_some_button_clicked()`
self.some_button.clicked.connect(self.on_some_button_clicked)

# this is a *slot*
def on_some_button_clicked(self):
    self.button_clicked_signal.emit(self.var_1)    # `button_clicked_signal` is the signal you created, we pass it `self.var_1`'s value


# in `class_2` class, somewhere
# this is a *slot*
def on_window1_button_clicked(self, var_1):
    self.var_2 = var_1

The above is one of many ways you can achieve what you want. [UPDATE I changed it a bit, and added some more comments.]

john_hobbyist

Why do I get this error?

    Signal(button_clicked_signal)
NameError: name 'button_clicked_signal' is not defined

From here:

# in `class_1` class, somewhere
# you must create your own "PyQt signal" for the ` self.button_clicked_signal` we are going to `emit` below
# you must look up the PyQt5 syntax for that, it is *something* like (as a class variable):
pyqtSignal(button_clicked_signal)

I changed this:

pyqtSignal(button_clicked_signal)

to this:

 Signal(button_clicked_signal)

SGaist

Hi,

Because it's wrong.

The correct way to declare a signal is:

class MyWidget(QWidget):
    mySignal = Signal()

Between the parenthesis, put the type for the arguments if any.

john_hobbyist

@SGaist said in How to pass a value from one class to another where each class is on different file:

Hi,

Because it's wrong.

The correct way to declare a signal is:
class MyWidget(QWidget):
    mySignal = Signal()
Between the parenthesis, put the type for the arguments if any.

   self.window1.triggered.connect(self.window2.on_window1_button_clicked)
AttributeError: 'class_1' object has no attribute 'triggered'

I use menus instead of buttons. And I click them. How to fix the above error?

JonB

@john_hobbyist
self.window1 is of class_1. The error message tells you that has no method/member named triggered. Since you do not show what class_1, how should people answer "How to fix the above error? Either use a class which has a triggered member or do not try to access self.window1.triggered?

john_hobbyist

@JonB said in How to pass a value from one class to another where each class is on different file:

@john_hobbyist
self.window1 is of class_1. The error message tells you that has no method/member named triggered. Since you do not show what class_1, how should people answer "How to fix the above error?? Either use a class which has a triggeredmember or do not try to accessself.window1.triggered`?

I copy paste from your previously posted code above:

# in `MainWindow` class, somewhere
self.window1 = class_1()
self.window2 = class_2()

# connect the signal raised from `class_1` with its `var_1` parameter
# to call the slot in `class_2` with that value as a parameter
self.window1.button_clicked.connect(self.window2.on_window1_button_clicked)


# in `class_1` class, somewhere
# you must create your own "PyQt signal" for the ` self.button_clicked_signal` we are going to `emit` below
# you must look up the PyQt5 syntax for that, it is *something* like (as a class variable):
pyqtSignal(button_clicked_signal)

# connect the Qt `QPushButton.clicked()` signal to `self.on_some_button_clicked()`
self.some_button.clicked.connect(self.on_some_button_clicked)

# this is a *slot*
def on_some_button_clicked(self):
    self.button_clicked_signal.emit(self.var_1)    # `button_clicked_signal` is the signal you created, we pass it `self.var_1`'s value


# in `class_2` class, somewhere
# this is a *slot*
def on_window1_button_clicked(self, var_1):
    self.var_2 = var_1

What should I change here? I implement the above rationale to my code. I cannot post my code is too huge for here, but I follow your logic...

SGaist

There's no triggered signal anywhere in sight in your code.

What can you do ?

Create minimal script with a small UI where you can actually properly experiment and implement signals and slots rather than trying to cram it in your huge code base. Once you have understood how it working, then you will be able to translate that to your application.

On a side note, please give your classes and variable meaningful names. Random things like class_1 does not make your code readable nor easy to reason about.

john_hobbyist

@SGaist said in How to pass a value from one class to another where each class is on different file:

There's no triggered signal anywhere in sight in your code.

What can you do ?

Create minimal script with a small UI where you can actually properly experiment and implement signals and slots rather than trying to cram it in your huge code base. Once you have understood how it working, then you will be able to translate that to your application.

On a side note, please give your classes and variable meaningful names. Random things like class_1 does not make your code readable nor easy to reason about.

I have spent many days studying tutorials such as this: https://programmer.group/pyqt5-quick-start-pyqt5-signal-slot-mechanism.html, this: https://www.geeksforgeeks.org/pyqt5-qaction/ and many stackoverflow questions.... What I mean is that I have ran code and see what happens. Do I need these lines from the code above:

# in `MainWindow` class, somewhere
self.window1 = class_1()
self.window2 = class_2()

???

SGaist

That's quite a strange question to ask. If you want to use objects from either of class_1 or class_2 in your MainWindow class, then yes you need them.

john_hobbyist

@SGaist said in How to pass a value from one class to another where each class is on different file:

That's quite a strange question to ask. If you want to use objects from either of class_1 or class_2 in your MainWindow class, then yes you need them.

So, since

triggered.connect

does not work on them, how I send the signal when the menus (that call those functions) are chosen? I am confused...

JonB

@john_hobbyist said in How to pass a value from one class to another where each class is on different file:

does not work on them, how I send the signal when the menus (that call those functions) are chosen? I am confused...

Q: What Qt object has a triggered signal?
A: void QAction::triggered(bool checked = false)

This signal is emitted when an action is activated by the user; for example, when the user clicks a menu option, toolbar button, or presses an action's shortcut key combination, or when trigger() was called

So you need QActions for your QMenu items:

Normally, you connect each menu action's triggered() signal to its own custom slot

john_hobbyist

I left signals and slots. I am trying with getters and setters... like here: https://www.geeksforgeeks.org/getter-and-setter-in-python/

I have stuck here... This is part of my code:

class class_1():
	def do_this(self):
		...
		# code here...
		...
		self.myvar = "Ok"
		...
	def get_var(self):
		return self.myvar

class class_2():
	def do_something(self):
		raj = class_1()
		self.var = raj.get_var()
		print("var = ", self.var) # here I check the value
		...

But I get this error:

    raj = class_1()
UnboundLocalError: local variable 'class_1' referenced before assignment

Any idea what I miss here?

JonB

@john_hobbyist

Did you import the class1 module into the class_2 module?
Is your code indeed as you show?
Does it really say it fails on the raj = class_1() statement?
Are you aware, even if you get this working, that raj = class_1() will create a new instance of class_1? And that is really what you intend/need for your question, and you're not going to come back and say "but this way it doesn't access the existing class_2 instance/widget I had"... ?

SGaist

Beside the points of @JonB, please write a minimal complete script that we can take a look at. You only post small snipets from here and there then some error that we can only vaguely guess why they happen.

john_hobbyist

@JonB said in How to pass a value from one class to another where each class is on different file:

@john_hobbyist

Did you import the class1 module into the class_2 module?

Is your code indeed as you show?

Does it really say it fails on the raj = class_1() statement?

Are you aware, even if you get this working, that raj = class_1() will create a new instance of class_1? And that is really what you intend/need for your question, and you're not going to come back and say "but this way it doesn't access the existing class_2 instance/widget I had"... ?

Thank you for your comment! No, my code is very huge. I depict only the needed parts here... Do you have any better idea of how to pass the value from class_1() to class_2()? I tried signals/slots but I didn't achieve something. Any idea of how to pass the value with getters/setters?

SGaist

You realize to you linked to a blog post describing exactly how to implement a getter and a setter and how to use them ?