PySide6-How to adjust the widgets in a Qsplitter?

[feiyuhuahuo]

@StarterKit I want to stretch a widget (e.g. a text browser) up or down, and at the same time I want to adjust the widget freely in a splitter just like a widget in a QLayout does. In the above picture, in the left window, the text browser can stretch up or down, but I can't assign a specified layout. In the right window, I can set preferred layout, but the text browsers are fixed size.

[SGaist]

It looks like you want to put your editor in a layout in a "container" widget and then put that container widget in the splitter.

[feiyuhuahuo]

@SGaist
When my cursor is on the edge of a textbroswer, it will become a arrow-like style and I can drag the text browser up and down. But the problem is, I can't set a preferred initial layout for the two text browsers. I can't make the left window lool like the right window.

[StarterKit]

@feiyuhuahuo , pardon, but it is still not fully clear abot what you want to achieve at the end...
Did I get it right that you need:

• 2 separated text editors, one above another;
• wide empty space between 2 editors, i.e. for example constatly have 2 editors separated by 100 pixels;
• you want to adjust size of text editors - i.e. decrease one and increase another keeping them separated by wide fixed area.

Is it so? Or I got something wrong?...

[feiyuhuahuo]

@StarterKit
Yes, you almost get it right. Let me be specific.
Actually, I have a custom UI. You can see from the below gif that, the ui is good alignment at the first time it is showed. But the right column can not drag up or down.

So I used Qsplitter to achieve this function (show in the below gif). But the code logic is, the label 'dd', textbrowser(top), label 'aa', textbrowser(bottom) are in a same Qsplitter, and then the Qsplitter is put in a QHboxLayout. Because of this, I can't keep them good alignment at the first time they are showed. The format which I designed in QtDesigner becomes useless and I also can't use QLayout related code to adjust the alignment.

At the end, my requirement is that I want to drag the right column up and down and keep the alignment good at the first time the window is showed.

[StarterKit]

@feiyuhuahuo ok, I think I understood you.
But before giving any proposals I would like to check my understading.
So, the problem is: when you put a splitter in right column it takes extra space. And there is nothing in left column that would be aligned with the splitter. It makes left column a bit disconnected (by some pixels) from right clumn.
Right?

So, you need something in your left column to occupy exactly the same space as splitter does in the right column?

[feiyuhuahuo]

@StarterKit
This is the initial window after I calling show(). You can see that the purple line and the yellow line are misalignment, they are not horizontal alignment. So as the red line and the blue line. I don't know how to adjust the format of the widgets in the right column. All the widgets of the right column are in a QSplitter. They can not be adjusted freely like those in a QHBoxLayout does. After calling show of the window, without any operation, I want the right column to be the same format as that in the top gif in my last reply.

[StarterKit]

@feiyuhuahuo , ok, try this example - does it look like what you need?

from PySide2.QtWidgets import QApplication, QLabel, QHBoxLayout, QVBoxLayout, QTextEdit, QWidget, QFrame, QSplitter
from PySide2.QtCore import Qt, QMargins


class ExampleWindow(QWidget):
    def __init__(self):
        super().__init__()

        # Split window into left and right part
        self.h_layout = QHBoxLayout()
        self.setLayout(self.h_layout)

        # Create Left part
        self.left_frame = QFrame()
        self.h_layout.addWidget(self.left_frame)
        self.v_layout_left = QVBoxLayout()          # Arrange left part vertically
        self.left_frame.setLayout(self.v_layout_left)

        # Build left part of two frames - left_top and left_bottom, both with vertical layout
        self.left_top = QFrame()
        self.v_layout_left.addWidget(self.left_top)
        self.left_top_layout = QVBoxLayout()
        self.left_top.setLayout(self.left_top_layout)
        self.left_top_layout.setContentsMargins(QMargins(0, 0, 0, 0))

        self.left_top_layout.addWidget(QLabel(text="AA"))   # Add widgets to left top frame
        self.left_top_layout.addWidget(QTextEdit())
        self.left_top_layout.addWidget(QLabel(text="BB"))
        self.left_top_layout.addWidget(QTextEdit())

        self.left_bottom = QFrame()
        self.left_bottom_layout = QVBoxLayout()
        self.left_bottom_layout.setContentsMargins(QMargins(0, 0, 0, 0))
        self.v_layout_left.addWidget(self.left_bottom)
        self.left_bottom.setLayout(self.left_bottom_layout)

        self.left_bottom_layout.addWidget(QLabel(text="CC"))   # Add widgets to left bottom frame
        self.left_bottom_layout.addWidget(QTextEdit())

        # Define a ratio between upper and lower parts
        self.v_layout_left.setStretchFactor(self.left_top, 2)
        self.v_layout_left.setStretchFactor(self.left_bottom, 1)

        # Create right part
        self.right_frame = QFrame()
        self.h_layout.addWidget(self.right_frame)
        self.v_layout_right = QVBoxLayout()           # Arrange right part vertically
        self.right_frame.setLayout(self.v_layout_right)

        self.splitter = QSplitter(Qt.Vertical)        # Add splitter to the right part
        self.v_layout_right.addWidget(self.splitter)

        self.right_top = QFrame()
        self.right_top_layout = QVBoxLayout()
        self.right_top_layout.setContentsMargins(QMargins(0, 0, 0, 0))
        self.splitter.addWidget(self.right_top)
        self.right_top.setLayout(self.right_top_layout)

        self.right_top_layout.addWidget(QLabel(text="DD"))    # Add widgets to right top frame
        self.right_top_layout.addWidget(QTextEdit())

        self.right_bottom = QFrame()
        self.right_bottom_layout = QVBoxLayout()
        self.right_bottom_layout.setContentsMargins(QMargins(0, 0, 0, 0))
        self.splitter.addWidget(self.right_bottom)
        self.right_bottom.setLayout(self.right_bottom_layout)

        self.right_bottom_layout.addWidget(QLabel(text="EE"))  # Add widgets to right bottom frame
        self.right_bottom_layout.addWidget(QTextEdit())

        # Define a ratio between upper and lower parts
        self.splitter.setStretchFactor(0, 2)
        self.splitter.setStretchFactor(1, 1)


if __name__ == '__main__':
    app = QApplication()
    wnd = ExampleWindow()
    wnd.resize(800, 600)
    wnd.show()
    app.exec_()

[feiyuhuahuo]

class ExampleWindow(QWidget):
    def __init__(self):
        super().__init__()
        # Split window into left and right part
        self.h_layout = QHBoxLayout()
        self.setLayout(self.h_layout)

        self.left_top_layout = QVBoxLayout()
        self.left_top_layout.setContentsMargins(QMargins(0, 0, 0, 0))
        self.left_top_layout.addWidget(QLabel(text="AA"))  # Add widgets to left top frame
        self.left_top_layout.addWidget(QTextBrowser())
        self.left_top_layout.addWidget(QLabel(text="BB"))
        self.left_top_layout.addWidget(QTextBrowser())
        self.left_top_layout.addWidget(QLabel(text="CC"))  # Add widgets to left bottom frame
        self.left_top_layout.addWidget(QTextBrowser())
        self.h_layout.addLayout(self.left_top_layout)

        self.splitter = QSplitter(Qt.Vertical)  # Add splitter to the right part
        self.splitter.addWidget(QLabel(text="DD"))
        self.splitter.addWidget(QTextBrowser())
        self.splitter.addWidget(QLabel(text="EE"))
        self.splitter.addWidget(QTextBrowser())

        # Define a ratio between upper and lower parts
        self.splitter.setStretchFactor(0, 0)
        self.splitter.setStretchFactor(1, 108)
        self.splitter.setStretchFactor(2, 0)
        self.splitter.setStretchFactor(3, 50)

        self.rl = QVBoxLayout()
        self.rl.addWidget(self.splitter)
        self.h_layout.addLayout(self.rl)


if __name__ == '__main__':
    app = QApplication()
    wnd = ExampleWindow()
    wnd.resize(800, 600)
    wnd.show()
    app.exec()

@StarterKit Thanks, I splified your code. The self.splitter.setStretchFactor is really helpful. I can make my UI looks better now. But I think it's better for Qsplitter to support setSpacing function either like QLayout does. In my above code, if I set a spacing for self.left_top_layout, then the left column and the right column will not be horizontal alignment. Besides, will QtDesigner support Qsplitter? It's often used and will be convenient if we can edit it in QtDesigner.

[StarterKit]

@feiyuhuahuo said in PySide6-How to adjust the widgets in a Qsplitter?:

Thanks, I splified your code.

You are welcome. I didn't know exactly your goal so I did just a fast and dirty draft to illustrate an option. You may adjust it freely to your exact needs.

@feiyuhuahuo said in PySide6-How to adjust the widgets in a Qsplitter?:

Besides, will QtDesigner support Qsplitter?

Yes, it supports:

1. Select widgets with help of Ctrl and left mouse key
2. Right mouse click, choose menu item Layout and make appropriated split selection.