signal/slot not working

[6thC]

@mzimmers said in signal/slot not working:

WifiSetup

Is that class type registered? ie

qRegisterMetaType<WifiSetup>("WifiSetup");

It needs registering before using signals and slots.

https://doc.qt.io/qt-5/qtcore-threads-queuedcustomtype-example.html

[sierdzio]

@6thC said in signal/slot not working:

@mzimmers said in signal/slot not working:

WifiSetup

Is that class type registered? ie

qRegisterMetaType<WifiSetup>("WifiSetup");

It needs registering before using signals and slots.

https://doc.qt.io/qt-5/qtcore-threads-queuedcustomtype-example.html

This is not true. Signal/slot arguments need to be registered, not the worker object.

[6thC]

Ah, yes, you are correct, I didn't really look to see that class was the worker.

I was thinking aloud like what I'd be checking, usually for things like this, my (indeed) arg type in need of registering is logged to application console.

[mzimmers]

@sierdzio yes, the signals are called after the worker is moved.

(how did you know worker was in another thread?)

[sierdzio]

@mzimmers said in signal/slot not working:

@sierdzio yes, the signals are called after the worker is moved.

(how did you know worker was in another thread?)

It's common to call objects working in other threads "workers" :-)

[mzimmers]

@sierdzio ah. So...any other ideas on how to chase this down? I've exhausted my own ideas...

[hskoglund]

Just a guess, but maybe it's a timing problem, if the MSG_WIFI_SETUP_ACK message arrives in the Worker before
QObject::connect(m_worker, &Worker::wifiSetupAckReceived, this, &WifiSetup::onAckReceived); has been run...

[mzimmers]

@hskoglund thanks for the suggestion, but that's definitely not the case. The connect statement is run in the c'tor of the QWidget, and the message only comes after the user presses a button, a message is sent out to the remote device and a response is read.

[JonB]

@mzimmers said in signal/slot not working:

When mt == MSG_WIFI_SETUP_ACK, the signal is called, but the slot is never reached.

How do you know it is called? Is the code containing the emit yours/debug-breakpointable by you?

Is m_worker another thread?

Add a brand new pair of slots, which do nothing, and attach them too to the signals. Preferably first. Do they behave the same?

[mzimmers]

@JonB said in signal/slot not working:

How do you know it is called? Is the code containing the emit yours/debug-breakpointable by you?
Is m_worker another thread?

Yes, and yes. The emit is in my first post.

Add a brand new pair of slots, which do nothing, and attach them too to the signals. Preferably first. Do they behave the same?

    QObject::connect(m_worker, &Worker::wifiSetupAckReceived, this, &WifiSetup::testSlot1);
    QObject::connect(m_worker, &Worker::wifiSetupAckReceived, this, &WifiSetup::testSlot2);
    QObject::connect(m_worker, &Worker::wifiSetupAckReceived, this, &WifiSetup::onAckReceived);
void WifiSetup::testSlot1()
{
    qDebug() << "testSlot1 reached.";
}
void WifiSetup::testSlot2()
{
    qDebug() << "testSlot2 reached.";
}

I put breakpoints on all three slots...none are hit. And it's not some debugger error; no action by the slot(s) is taken.

[JonB]

@mzimmers
Earlier you said:

When mt == MSG_DISCOVERY_ACK, the signal and slot work correctly.

When mt == MSG_WIFI_SETUP_ACK, the signal is called, but the slot is never reached.

Good grief! I meant, a new pair, one on newSerialData, one on wifiSetupAckReceived. Not 3 on one and one on the other! Wanted to check the two signals each behaved the same as you reported (one good, one bad) on new slots.

Dunno, bet it's a thread thing :)

[mzimmers]

@JonB said in signal/slot not working:

Good grief! I meant, a new pair, one on newSerialData, one on wifiSetupAckReceived. Not 3 on one and one on the other! Wanted to check the two signals each behaved the same as you reported (one good, one bad) on new slots.

Sigh...my brain's still in low gear.

    QObject::connect(m_worker, &Worker::newSerialData, this, &WifiSetup::testSlot1);
    QObject::connect(m_worker, &Worker::newSerialData, this, &WifiSetup::onMsgReceived);
    QObject::connect(m_worker, &Worker::wifiSetupAckReceived, this, &WifiSetup::testSlot2);
    QObject::connect(m_worker, &Worker::wifiSetupAckReceived, this, &WifiSetup::onAckReceived);

Both slots for newSerialData get hit; neither of the ones for wifiSetupAckReceived get hit.

Dunno, bet it's a thread thing :)

What's confounding about this is that one works, and the other doesn't. Seemingly identical.

[JonB]

@mzimmers
Send me $5 if it turns out you're doing something else in your code causing this behaviour....

[mzimmers]

@JonB define "something else."

Hell, I should send you a bottle for all the help you've given me over the years...

Of course, by an extension of that reasoning, I'd have to buy SGaist his own distillery.

[SGaist]

Hi,

@mzimmers said in signal/slot not working:

mt = m_msg.getType();
switch (mt)

When is m_msg updated ? You could be processing the same value twice.

[mzimmers]

void Worker::processSerial(QByteArray buff)
{
    MsgType mt;
    string s;

    s.assign(buff);

    m_msg.decodeXml(s);
    mt = m_msg.getType();
    switch (mt)
    {
    case MSG_DISCOVERY_ACK:
        emit newSerialData(&m_msg);
        break;
    case MSG_WIFI_SETUP_ACK:
        emit wifiSetupAckReceived(&m_msg);
        break;
...

Besides, the signal is being emitted (at least according to the debugger).

[sierdzio]

Insert a qDebug() before the emit to be 100% sure.

One more idea... this method isn't called once, is it? Because if it is called once, and your have a break; in your switch then only the first ack will trigger MSG_DISCOVERY_ACK, then it will break and never bother to check if MSG_WIFI_SETUP_ACK is satisfied or not.

[JonB]

Let's be 100% clear for everyone: because of your separate threads, these are queued-connection signals, right? So the slots won't be called during the emits, only later on, and we're all clear about this, right?

@sierdzio said in signal/slot not working:

Insert a qDebug() before the emit to be 100% sure.

Damn right, I'd have expected you to do this to make sure already!

[sierdzio]

@JonB said in signal/slot not working:

Let's be 100% clear for everyone: because of your separate threads, these are queued-connection signals, right? So the slots won't be called during the emits, only later on, and we're all clear about this, right?

Yes, they will be queued. Good point, that adds one, although rare, possibility: the event loop may be too busy to process the queue.

[mzimmers]

Sigh.

I really should never have become a programmer.

This was pure cockpit error on my part. Everyone feel free to negrate me.

And Jon, email me your postal address; I'll send you a bottle of the good stuff.

Sorry, everyone.