Build on Linux: -qt-xcb option?
-
For the first time, I am trying to build Qt on Linux (a CentOS 7.4 system). I am working with the qt-everywhere-src-5.15.0 package.
I'm not really a Linux guy. I do develop cross-platform code (including Qt-based code) and have done so at various times over the years but I primarily use Windows and have always worked with Qt installs that someone else has provided.
My first build attempt appeared to succeed building but would not run. I get an error that the xcb plugin is missing and indeed the plugins/platform/libqxcb.so library is not there ( I do see this in a working 5.9.6 install that I have access to).
Although I had tried to specify the -qt-xcb option as mentioned in the Qt build instructions, this did not appear to be recognised by configure. Certainly it is not documented in the command line help of configure. It is not clear from the documentation whether this option - even if it worked - is the recommended approach. Is there a more up to date method of specifying it perhaps, and should I be doing it.
I also found that the clean option of configure is not recognised.
Can the Qt documentation for building on Linux be relied upon at all? One reason I ask is that I suspect that I will need to install some packages and perhaps that is why xcb is not being built. There is a long list of required packages in the documentation but given my experience of the documentation so far I don't know how trustworthy this list is. I also have the issue of mapping this from Debian to CentOS.
Please does anyone have straightforward instructions that don't assume too much prior knowledge, ideally for building on CentOS/RedHat-like systems?
-
Hi,
Did you check that you have all dependencies development packages installed ?
The configure script outputs logs. You should check them to see why the xcb tests failed.
-
Hi
Thanks for the hints. I took a closer look at the config.log. Earlier I had mainly looked at config.summary but I didn't really know what I was looking for. Anyway in the log, the only thing that fails that explicitly mentions xcb is the following:
looking for library xcb_icccm Trying source 0 (type pkgConfig) of library xcb_icccm ... + /usr/bin/pkg-config --exists --silence-errors xcb-icccm '>=' 0.3.9 pkg-config did not find package. => source produced no result. Trying source 1 (type inline) of library xcb_icccm ... xcb/xcb_icccm.h not found in [] and global paths. => source produced no result. test config.qtbase_gui.libraries.xcb_icccm FAILEDAs I mentioned I wasn't sure I had all packages installed. Will the packages listed in the Qt docs for Debian have the same name in CentOS 7.4? Do I need to worry about what versions to install etc.? (Sorry I am a noob at this!)
Going back to my original question, why doesn't configure recognise the -qt-xcb option for me - do I need to worry about that?
-
I have gone through the dependencies listed in the Qt doc and looked for equivalents on my system or available for installation. Most appear to be there if I ignore slight naming differences (no numbers in the CentOS package names).
libxi-devandlibxkbcommon-x11-devequivalents aren't installed but are available. However, I can't seelibx11-xcb-devorlibxcb-glx0-dev.libfontconfig1-dev fontconfig-devel.x86_64 libfreetype6-dev freetype-devel.x86_64 libx11-dev libX11-devel.x86_64 libxext-dev libXext-devel.x86_64 libxfixes-dev libXfixes-devel.x86_64 libxi-dev Not installed: libXi-devel.x86_64 libxrender-dev libXrender-devel.x86_64 libxcb1-dev libxcb-devel.x86_64 libx11-xcb-dev ? libxcb-glx0-dev ? libxkbcommon-x11-dev Not installed: libxkbcommon-x11-devel.x86_64Note that this list is the one specified for when configuring with -qt-xcb which as I have mentioned does not work for me - gives error:
ERROR: Invalid value given for boolean command line option 'xcb'.There are a bunch of other dependencies listed in the Qt doc for if one doesn't compile with this option. These are all of the form
libxcb-<something>-dev. I can find plausible looking CentOS equivalents for<something>=keysmys1,image0,render-util0but none of the others (includinglibxcb-icccm4-dev, which stands out because of the configure error relating toxcb-icccmthat I mentioned earlier). -
From a quick search, try with "libxcbutil-icccm".
-
@SGaist Thanks. It wasn't showing up as a package available for download on my machine's package manager. I did do a quick web search and I found one match but for a different CentOS version and I don't know if it was an "official" source.
In any case, I think that package should only be needed for the non -qt-xcb case. I would still like to understand what is going on there. Is that option no longer available in configure? Is the documentation now incorrect? Has it been replaced with a different setting?
-
-qt-xcb was removed from configure (and also from the documentation for 5.15 but the official site did not pick up the lastest version yet - see https://codereview.qt-project.org/c/qt/qtdoc/+/300877/3/doc/src/platforms/linux.qdoc )
Qt Online Installer direct download: https://download.qt.io/official_releases/online_installers/
Visit the Qt Academy at https://academy.qt.io/catalog -
@Christian-Ehrlicher said in Build on Linux: -qt-xcb option?:
-qt-xcb was removed from configure (and also from the documentation for 5.15 but the official site did not pick up the lastest version yet - see https://codereview.qt-project.org/c/qt/qtdoc/+/300877/3/doc/src/platforms/linux.qdoc )
Good catch, I forgot about that one.
-
I'm seeing a similar problem on centOS 7.2, but I've previously installed earlier versions of Qt without a problem.
For me, Qt 5.15.0 seems to be installing, but the X11Extras is not, and I need the X11Extras module to install successfully.looking at the logs of a successful and working Qt 5.12 installation, it mentioned iccm failures there, too, but that seemed to be inconsequential, since those installations worked for me.
What stands out in my case is a complete absence of any reference to render or xrender in the logs for the 5.15.0 installation.
When I tried "-bundled-xcb-xinput", my config.summary said this:
"WARNING: Feature system-xcv-xinput is insignificant in this configuration, ignoring related command line option(s)."It didn't seem to make any difference.
As an experiment, the original poster could try installing Qt 5.14.0, to compare. I was able to install that on CentOS 7.2.
If that is successful, we might have the same problem, and comparing a successful 5.14 installation with a problematic 5.15 installation might help. We may both need the same solution. -
@Joshua-Fletcher said in Build on Linux: -qt-xcb option?:
We may both need the same solution.
The solution is to use xcb from the distribution since it no longer is shipped with Qt.
-
@Christian-Ehrlicher Thank you! That is a big help as it eliminates one of the main things that was confusing me.
The problem is now reduced to resolving the list of dependencies. I can't believe that if icccm (for example) is so important that it is not available more easily so I am wondering if it gets bundled with another package on CentOS. I am going to have to ask for packages to be installed as I don't have privileges at the moment, which is why it would be useful to have a definitive list of what is needed on CentOS.
-
I found that ensuring these packages were installed was sufficient for my purposes:
libxcb-devel
libxkbcommon-devel
xcb-util-devel
xcb-util-image-devel
xcb-util-keysyms-devel
xcb-util-renderutil-devel
xcb-util-wm-devel
mesa-libGL-develthe only one I was actually missing was: xcb-util-renderutil-devel
but if you can, check and make sure all those are installed, and I think it should work for you. -
Hi, I just also trying to solve problems with -qt-xcb option.
I removed this switch and compiled the latest Qt 5.15.0. But my application didn't start with error:
qt.qpa.plugin: Could not find the Qt platform plugin "xcb" in ""
This application failed to start because no Qt platform plugin could be initialized. Reinstalling the application may fix this problem.
Available platform plugins are: linuxfb, minimal, offscreen, vnc.Directory qt\plugis\platforms contains only
libqlinuxfb.so
libqminimal.so
libqoffscreen.so
libqvnc.soThanks for any help
-
@JoeCFD Thanks for the reply. I already saw this topic but it is a slightly different problem.
I do not have a message:
Qt platform plugin "xcb" in "" even though it was found.
but only
Qt platform plugin "xcb" in ""My issue is that I don't have file libqxcb.so in Qt/plugins/platform directory at all.
I tried to compile it with -qt-xcb like several times before, but because this switch was removed, I tried it without that. Also, I tried "-xcb" switch too.
But although I have "X11 specific: XCB Xlib...yes" message during configuration, libqxcb.so file isn't created.
-
Seems that adding following switches forces Qt to build libxcb.so
-xcb -xcb-xlib -bundled-xcb-input
(it's necessary to add all these switches based on my observations)
-
@ludek-vodicka, where do you specify those options? They are not part of configure, correct?
-
@Jawsh said in Build on Linux: -qt-xcb option?:
They are not part of configure
They are. Call configure with -h parameter and you will see.
-
Actually, if I remove bundled-xcb-input it works on configure. However, I have run into a new error: "ERROR: Feature 'xcb' was enabled, but the pre-condition 'features.thread && libs.xcb && tests.xcb_syslibs && features.xkbcommon-x11' failed." Anyone have any ideas? I have installed as many of the prerequisite libs as I could find listed.
-
Found this on: https://github.com/RudolfCardinal/camcops/issues/3
sudo apt-get build-dep qt5-default (having enabled "Source code" option in Software and Updates > Ubuntu Software)After I did this, deleted config.cache, and reran configure then it worked.
