How to install Tslib plugin for qt 5.7

tictactoe

There is one problem , Although I calibrate the touchscreen via ts_calibrate but I think the qt code does not follow the calibration points . I use this environment variable for tslib.

export TSLIB_FBDEVICE=/dev/fb0
export TSLIB_CONSOLEDEVICE=/dev/tty
export TSLIB_TSDEVICE=/dev/input/event0
export TSLIB_CONFFILE=/etc/ts.conf
export TSLIB_CALIBFILE=/etc/pointercal
export TSLIB_PLUGINDIR=/usr/local/lib/ts

Some button on the different place of the touchscreen is touched so hardly.
What can I do for it?

SGaist

AFAIK, if you are using evdev, it won't use tslib to manage input.

rrd0

@SGaist said in How to install Tslib plugin for qt 5.7:

AFAIK, if you are using evdev, it won't use tslib to manage input.

Do you know how to disable evdev?

SGaist

@rrd0 why ?

Configure your environment to use another input plugin.

rrd0

@SGaist

Cause I'm trying to use tslib instead of evdev, but I think something is wrong with my setup.

When I run ts_test I get perfect readings, but when I run a Qt app there's a difference between real touched point and the value read. Close to center of the screen the readings are perfect, but there's an error that accumulates and gets large near the edges.

SGaist

What settings are you using ?

rrd0

@SGaist

I have Qt 5.10.1 cross-compiled to Raspberry Pi 3.

Here is my /etc/environment file:

TSLIB_FBDEVICE=/dev/fb0
TSLIB_TSDEVICE=/dev/input/touchscreen
TSLIB_CALIBFILE=/etc/pointercal
TSLIB_CONFFILE=/etc/ts.conf
TSLIB_PLUGINDIR=/usr/local/lib/ts
QT_QPA_EGLFS_TSLIB=1
QT_QPA_EGLFS_HIDECURSOR=1
QT_QPA_EGLFS_PHYSICAL_WIDTH=144
QT_QPA_EGLFS_PHYSICAL_HEIGHT=235

SGaist

Might be a silly question but do you have screen in landscape mode ?

rrd0

@SGaist said in How to install Tslib plugin for qt 5.7:

Might be a silly question but do you have screen in landscape mode ?

Nope. I rotate it to portrait mode.

SGaist

How does your system handle that ?

rrd0

@SGaist said in How to install Tslib plugin for qt 5.7:

How does your system handle that ?

Sorry. I didn't understand that question. What exactly do you want to know?

If you want to know how I rotated the screen, it was with the command ./LCD101-1024x600-show 270.

LCD101-1024x600-show was downloaded from https://github.com/waveshare/LCD-show.