error: undefined reference to `std::__throw_out_of_range_fmt(char const*, ...)@GLIBCXX_3.4.20'

SGaist

Hi,

Did you try with the arm-rpi-4.9.3-linux-gnueabihf that's in the same repository ?

JiujiuTong

i first set the compiler path to gcc-linaro-arm-linux-gnueabihf-raspbian-x64, then i found the issue, i try to set it to arm-4.9.3-linux-gnueabihf in qtcreator, but i find the compiler path is still: ~/raspi/tools/arm-bcm2708/gcc-linaro-arm-linux-gnueabihf-raspbian-x64/bin/arm-linux-gnueabihf-g++
even i reinstall the qtcreator and reconfigure the compiler(i find the compiler path in the file" makefile"),is there any other ways can set the compiler to arm-4.9.3-linux-gnueabihf ?
another info:
i try to replace the gcc-linaro-arm-linux-gnueabihf-raspbian-x64 with arm-4.9.3-linux-gnueabihf in makefile and run build project in qtcreator, there is an error :/home/tong/raspi/sysroot/usr/include/features.h:374: error: sys/cdefs.h: No such file or directory

include <sys/cdefs.h>

JiujiuTong

@SGaist @jsulm
when i set compiler to arm-rpi-4.9.3-linux-gnueabihf.
there is an waring::
:-1: warning: "/home/tong/raspi/tools/arm-bcm2708/gcc-linaro-arm-linux-gnueabihf-raspbian-x64/bin/arm-linux-gnueabihf-g++" is used by qmake, but "/home/tong/raspi/tools/arm-bcm2708/arm-rpi-4.9.3-linux-gnueabihf/bin/arm-linux-gnueabihf-g++" is configured in the kit.
Please update your kit or choose a mkspec for qmake that matches your target environment better.
and the makefile qtcreator created still contains the gcc-linaro-arm-linux-gnueabihf-raspbian-x64/bin/arm-linux-gnueabihf-g++

SGaist

You should re-cross-compile Qt with that compiler directly.

JiujiuTong

@SGaist
well , i tried it , here is configure error:
/home/tong/raspi/tools/arm-bcm2708/arm-rpi-4.9.3-linux-gnueabihf/bin/arm-linux-gnueabihf-g++ -c -pipe -march=armv7-a -marm -mthumb-interwork -mfpu=neon-vfpv4 -mtune=cortex-a7 -mabi=aapcs-linux -mfloat-abi=hard --sysroot=/home/tong/raspi/sysroot -g -Wall -W -fPIC -I. -I../../mkspecs/devices/linux-rasp-pi2-g++ -o arch.o arch.cpp
In file included from /home/tong/raspi/sysroot/usr/include/stdio.h:27:0,
from arch.cpp:43:
/home/tong/raspi/sysroot/usr/include/features.h:374:25: fatal error: sys/cdefs.h: No such file or directory

include <sys/cdefs.h>

compilation terminated.
make: *** [arch.o] Error 1
Makefile:199: recipe for target 'arch.o' failed
Unable to determine architecture!

Could not determine the target architecture!
Turn on verbose messaging (-v) to see the final report.
Determining architecture... ()
g++ -c -pipe -g -Wall -W -fPIC -I. -I../../mkspecs/linux-g++ -o arch.o arch.cpp
g++ -o arch arch.o
Found architecture in binary
CFG_HOST_ARCH="x86_64"
CFG_HOST_CPUFEATURES=" mmx sse sse2"
System architecture: 'unknown'
Host architecture: 'x86_64'
Precompiled-headers support enabled.
/home/tong/raspi/tools/arm-bcm2708/arm-rpi-4.9.3-linux-gnueabihf/bin/arm-linux-gnueabihf-g++ -c -fvisibility=hidden fvisibility.c
Symbol visibility control enabled.
collect2: fatal error: cannot find 'ld'
compilation terminated.
/home/tong/raspi/tools/arm-bcm2708/arm-rpi-4.9.3-linux-gnueabihf/bin/arm-linux-gnueabihf-g++ --sysroot=/home/tong/raspi/sysroot -o libtest.so -shared -Wl,-Bsymbolic-functions -fPIC bsymbolic_functions.c
bsymbolic_functions.c:2:2: error: #error "Symbolic function binding on this architecture may be broken, disabling it (see QTBUG-36129)."
#error "Symbolic function binding on this architecture may be broken, disabling it (see QTBUG-36129)."
^
Symbolic function binding disabled.
checking for C++14...
/home/tong/raspi/tools/arm-bcm2708/arm-rpi-4.9.3-linux-gnueabihf/bin/arm-linux-gnueabihf-g++ -c -pipe -march=armv7-a -marm -mthumb-interwork -mfpu=neon-vfpv4 -mtune=cortex-a7 -mabi=aapcs-linux -mfloat-abi=hard --sysroot=/home/tong/raspi/sysroot -O2 -std=gnu++1y -Wall -W -fPIC -I. -I../../../mkspecs/devices/linux-rasp-pi2-g++ -o c++14.o c++14.cpp
/home/tong/raspi/tools/arm-bcm2708/arm-rpi-4.9.3-linux-gnueabihf/bin/arm-linux-gnueabihf-g++ -Wl,-rpath-link,/home/tong/raspi/sysroot/opt/vc/lib -Wl,-rpath-link,/home/tong/raspi/sysroot/usr/lib/arm-linux-gnueabihf -Wl,-rpath-link,/home/tong/raspi/sysroot/lib/arm-linux-gnueabihf -mfloat-abi=hard -Wl,-O1 -o c++14 c++14.o --sysroot=/home/tong/raspi/sysroot
/home/tong/raspi/tools/arm-bcm2708/arm-rpi-4.9.3-linux-gnueabihf/bin/../lib/gcc/arm-linux-gnueabihf/4.9.3/../../../../arm-linux-gnueabihf/bin/ld: cannot find crt1.o: No such file or directory
/home/tong/raspi/tools/arm-bcm2708/arm-rpi-4.9.3-linux-gnueabihf/bin/../lib/gcc/arm-linux-gnueabihf/4.9.3/../../../../arm-linux-gnueabihf/bin/ld: cannot find crti.o: No such file or directory
/home/tong/raspi/tools/arm-bcm2708/arm-rpi-4.9.3-linux-gnueabihf/bin/../lib/gcc/arm-linux-gnueabihf/4.9.3/../../../../arm-linux-gnueabihf/bin/ld: cannot find -lm
collect2: error: ld returned 1 exit status
make: *** [c++14] Error 1
Makefile:92: recipe for target 'c++14' failed
C++14 disabled.
checking for default C++ standard edition...
/home/tong/raspi/tools/arm-bcm2708/arm-rpi-4.9.3-linux-gnueabihf/bin/arm-linux-gnueabihf-g++ -pipe -march=armv7-a -marm -mthumb-interwork -mfpu=neon-vfpv4 -mtune=cortex-a7 -mabi=aapcs-linux -mfloat-abi=hard --sysroot=/home/tong/raspi/sysroot -O2 -Wall -W -fPIC -I. -I../../../mkspecs/devices/linux-rasp-pi2-g++ -o c++default.ii -E c++default.cpp
default C++ standard edition enabled.
checking for 64-bit std::atomic...
/home/tong/raspi/tools/arm-bcm2708/arm-rpi-4.9.3-linux-gnueabihf/bin/arm-linux-gnueabihf-g++ -c -pipe -march=armv7-a -marm -mthumb-interwork -mfpu=neon-vfpv4 -mtune=cortex-a7 -mabi=aapcs-linux -mfloat-abi=hard --sysroot=/home/tong/raspi/sysroot -O2 -std=gnu++11 -Wall -W -fPIC -I. -I../../../mkspecs/devices/linux-rasp-pi2-g++ -o atomic64.o atomic64.cpp
In file included from /home/tong/raspi/tools/arm-bcm2708/arm-rpi-4.9.3-linux-gnueabihf/arm-linux-gnueabihf/include/c++/4.9.3/arm-linux-gnueabihf/bits/os_defines.h:39:0,
from /home/tong/raspi/tools/arm-bcm2708/arm-rpi-4.9.3-linux-gnueabihf/arm-linux-gnueabihf/include/c++/4.9.3/arm-linux-gnueabihf/bits/c++config.h:430,
from /home/tong/raspi/tools/arm-bcm2708/arm-rpi-4.9.3-linux-gnueabihf/arm-linux-gnueabihf/include/c++/4.9.3/bits/atomic_base.h:35,
from /home/tong/raspi/tools/arm-bcm2708/arm-rpi-4.9.3-linux-gnueabihf/arm-linux-gnueabihf/include/c++/4.9.3/atomic:41,
from atomic64.cpp:40:
/home/tong/raspi/sysroot/usr/include/features.h:374:25: fatal error: sys/cdefs.h: No such file or directory

include <sys/cdefs.h>

compilation terminated.
make: *** [atomic64.o] Error 1
Makefile:198: recipe for target 'atomic64.o' failed
64-bit std::atomic disabled.
checking for 64-bit std::atomic in -latomic...
/home/tong/raspi/tools/arm-bcm2708/arm-rpi-4.9.3-linux-gnueabihf/bin/arm-linux-gnueabihf-g++ -c -pipe -march=armv7-a -marm -mthumb-interwork -mfpu=neon-vfpv4 -mtune=cortex-a7 -mabi=aapcs-linux -mfloat-abi=hard --sysroot=/home/tong/raspi/sysroot -O2 -std=gnu++11 -Wall -W -fPIC -I. -I../../../mkspecs/devices/linux-rasp-pi2-g++ -o atomic64.o atomic64.cpp
In file included from /home/tong/raspi/tools/arm-bcm2708/arm-rpi-4.9.3-linux-gnueabihf/arm-linux-gnueabihf/include/c++/4.9.3/arm-linux-gnueabihf/bits/os_defines.h:39:0,
from /home/tong/raspi/tools/arm-bcm2708/arm-rpi-4.9.3-linux-gnueabihf/arm-linux-gnueabihf/include/c++/4.9.3/arm-linux-gnueabihf/bits/c++config.h:430,
from /home/tong/raspi/tools/arm-bcm2708/arm-rpi-4.9.3-linux-gnueabihf/arm-linux-gnueabihf/include/c++/4.9.3/bits/atomic_base.h:35,
from /home/tong/raspi/tools/arm-bcm2708/arm-rpi-4.9.3-linux-gnueabihf/arm-linux-gnueabihf/include/c++/4.9.3/atomic:41,
from atomic64.cpp:40:
/home/tong/raspi/sysroot/usr/include/features.h:374:25: fatal error: sys/cdefs.h: No such file or directory

include <sys/cdefs.h>

compilation terminated.
make: *** [atomic64.o] Error 1
Makefile:198: recipe for target 'atomic64.o' failed
64-bit std::atomic in -latomic disabled.
checking for std::atomic for function pointers...
/home/tong/raspi/tools/arm-bcm2708/arm-rpi-4.9.3-linux-gnueabihf/bin/arm-linux-gnueabihf-g++ -c -pipe -march=armv7-a -marm -mthumb-interwork -mfpu=neon-vfpv4 -mtune=cortex-a7 -mabi=aapcs-linux -mfloat-abi=hard --sysroot=/home/tong/raspi/sysroot -O2 -std=gnu++11 -Wall -W -fPIC -I. -I../../../mkspecs/devices/linux-rasp-pi2-g++ -o atomicfptr.o atomicfptr.cpp
In file included from /home/tong/raspi/tools/arm-bcm2708/arm-rpi-4.9.3-linux-gnueabihf/arm-linux-gnueabihf/include/c++/4.9.3/arm-linux-gnueabihf/bits/os_defines.h:39:0,
from /home/tong/raspi/tools/arm-bcm2708/arm-rpi-4.9.3-linux-gnueabihf/arm-linux-gnueabihf/include/c++/4.9.3/arm-linux-gnueabihf/bits/c++config.h:430,
from /home/tong/raspi/tools/arm-bcm2708/arm-rpi-4.9.3-linux-gnueabihf/arm-linux-gnueabihf/include/c++/4.9.3/bits/atomic_base.h:35,
from /home/tong/raspi/tools/arm-bcm2708/arm-rpi-4.9.3-linux-gnueabihf/arm-linux-gnueabihf/include/c++/4.9.3/atomic:41,
from atomicfptr.cpp:34:
/home/tong/raspi/sysroot/usr/include/features.h:374:25: fatal error: sys/cdefs.h: No such file or directory

include <sys/cdefs.h>

compilation terminated.
make: *** [atomicfptr.o] Error 1
Makefile:198: recipe for target 'atomicfptr.o' failed
std::atomic for function pointers disabled.
ERROR: detected a std::atomic implementation that fails for function pointers.
Please apply the patch corresponding to your Standard Library vendor, found in
/home/tong/raspi/qt-everywhere-opensource-src-5.7.1/qtbase/config.tests/common/atomicfptr

here is feature.h info:
/* This is here only because every header file already includes this one. */
#ifndef ASSEMBLER

ifndef _SYS_CDEFS_H

include <sys/cdefs.h>

endif

my configure:
./configure -release -opengl es2 -skip wayland -device linux-rasp-pi2-g++ -device-option CROSS_COMPILE=~/raspi/tools/arm-bcm2708/arm-rpi-4.9.3-linux-gnueabihf/bin/arm-linux-gnueabihf- -sysroot ~/raspi/sysroot -opensource -confirm-license -make libs -prefix /usr/local/qt5pi -extprefix ~/raspi/qt5pi -hostprefix ~/raspi/qt5 -v |tee config.out

SGaist

Do you have a development environment installed on your RPi3 ?

JiujiuTong

@SGaist
no ,I don't think so.
1,my rpi3 is clean image download form raspberry, i install some packages needed for my project
2,i sync the the files to host,
3,install qt with configuration gcc-linaro-arm-linux-gnueabihf-raspbian-x64.
4,sync qt files to rpi3,
5,i find one package is missed, i install the package on rpi3
6, sync the file to myhost again
7,i find the problem describe here , i follow your suggestion, in order to reinstall qt i run make unisntall and make clean
8,configure the qt with arm-rpi-4.9.3-linux-gnueabihf.
9,error happens
do you think i should clean my rpi3 and reinstall it?

SGaist

Take a look at this bug report of the tools repository.

JiujiuTong

@SGaist
thank you,i will try

JiujiuTong

@SGaist @jsulm
i successfully run my pro , Thank you very much!

SGaist

You're welcome !

Since you have it working now please mark the thread as solved using the "Topic Tools" button so that other forum users may know a solution has been found :)

huck

@JiujiuTong said in error: undefined reference to `std::__throw_out_of_range_fmt(char const*, ...)@GLIBCXX_3.4.20':

ERROR: detected a std::atomic implementation that fails for function pointers.

hello, I got the same problem as you did

ERROR: detected a std::atomic implementation that fails for function pointers.

How did your solve it, please?

JiujiuTong

@huck
recompile QT with arm-rpi-4.9.3-linux-gnueabihf tool

huck

@JiujiuTong said in error: undefined reference to `std::__throw_out_of_range_fmt(char const*, ...)@GLIBCXX_3.4.20':

ith arm-rpi-4.9.3-linux-gnueabihf tool

i am not compile qt yet, just in ./configure stage. by the way is arm-rpi-4.9.3-linux-gnueabihf a must?

JiujiuTong

@huck
do you mean that the error happens when you run ./configure ? can you past the error information ?

huck

@JiujiuTong yes , in configure run. and I am using imx6, instead of raspberry

Proprietary Codecs ..................... no
Spellchecker ........................... yes
ALSA ................................... no
PulseAudio ............................. no

Note: QtSerialBus: Cannot find linux/can.h and linux/can/raw.h Linux headers for socketCAN support.

Note: No wayland-egl support detected. Cross-toolkit compatibility disabled.

WARNING: No QPA platform plugin enabled! This will
produce a Qt that cannot run GUI applications.
The dependencies needed for xcb to build are listed in
src/plugins/platforms/xcb/README

ERROR: detected a std::atomic implementation that fails for function pointers.
Please apply the patch corresponding to your Standard Library vendor, found in
qtbase/config.tests/common/atomicfptr

JiujiuTong

@huck
sorry, it's not the same phenomenon...
@SGaist @jsulm
we need your helps :)

huck

@JiujiuTong VC 10 VC 11 GCC 4.6 GCC 4.7 替代方案
Reworded sequence points No No No No
Atomics No Yes No Yes Boost.Atomic

I think my gcc does not supoort “std::atomic”

thank you all the same

jsulm

@huck You should execute configure with -v and post the actual compiler error.
What is you GCC version?

huck

@jsulm said in error: undefined reference to `std::__throw_out_of_range_fmt(char const*, ...)@GLIBCXX_3.4.20':

uld execute configure with -v and post the actu

I did add -v in ./configure . I didn't make it yet, so this is the whole info
my gcc 4.6.2