Problems about Native build Qt5.7 on raspberry pi3

? This user is from outside of this forum

checking for FontConfig...
/usr/bin/g++ -c -march=armv8-a -mtune=cortex-a53 -mfpu=crypto-neon-fp-armv8 -mfloat-abi=hard -O2 -Wall -W -fPIC -I. -I/opt/vc/include -I/opt/vc/include/interface/vcos -I/opt/vc/include/interface/vcos/pthreads -I/opt/vc/include/interface/vmcs_host/linux -isystem /usr/include/freetype2 -I../../../mkspecs/devices/linux-rpi3-g++ -o fontconfig.o fontconfig.cpp
fontconfig.cpp: In function ‘int main(int, char**)’:
fontconfig.cpp:54:13: warning: variable ‘face’ set but not used [-Wunused-but-set-variable]
FT_Face face;
^
fontconfig.cpp:56:16: warning: variable ‘pattern’ set but not used [-Wunused-but-set-variable]
FcPattern pattern;
^
/usr/bin/g++ -Wl,-rpath-link,/opt/vc/lib -Wl,-rpath-link,/usr/lib/arm-linux-gnueabihf -Wl,-rpath-link,/lib/arm-linux-gnueabihf -mfloat-abi=hard -Wl,-O1 -o fontconfig fontconfig.o -lfreetype -lfontconfig
FontConfig enabled.
checking for libudev...
/usr/bin/g++ -c -march=armv8-a -mtune=cortex-a53 -mfpu=crypto-neon-fp-armv8 -mfloat-abi=hard -O2 -Wall -W -fPIC -I. -I/opt/vc/include -I/opt/vc/include/interface/vcos -I/opt/vc/include/interface/vcos/pthreads -I/opt/vc/include/interface/vmcs_host/linux -I../../../mkspecs/devices/linux-rpi3-g++ -o libudev.o libudev.cpp
/usr/bin/g++ -Wl,-rpath-link,/opt/vc/lib -Wl,-rpath-link,/usr/lib/arm-linux-gnueabihf -Wl,-rpath-link,/lib/arm-linux-gnueabihf -mfloat-abi=hard -Wl,-O1 -o libudev libudev.o -ludev
libudev enabled.
checking for evdev...
/usr/bin/g++ -c -march=armv8-a -mtune=cortex-a53 -mfpu=crypto-neon-fp-armv8 -mfloat-abi=hard -O2 -Wall -W -fPIC -I. -I/opt/vc/include -I/opt/vc/include/interface/vcos -I/opt/vc/include/interface/vcos/pthreads -I/opt/vc/include/interface/vmcs_host/linux -I../../../mkspecs/devices/linux-rpi3-g++ -o evdev.o evdev.cpp
/usr/bin/g++ -Wl,-rpath-link,/opt/vc/lib -Wl,-rpath-link,/usr/lib/arm-linux-gnueabihf -Wl,-rpath-link,/lib/arm-linux-gnueabihf -mfloat-abi=hard -Wl,-O1 -o evdev evdev.o
evdev enabled.
checking for tslib...
/usr/bin/g++ -c -march=armv8-a -mtune=cortex-a53 -mfpu=crypto-neon-fp-armv8 -mfloat-abi=hard -O2 -Wall -W -fPIC -I. -I/opt/vc/include -I/opt/vc/include/interface/vcos -I/opt/vc/include/interface/vcos/pthreads -I/opt/vc/include/interface/vmcs_host/linux -I../../../mkspecs/devices/linux-rpi3-g++ -o tslib.o tslib.cpp
/usr/bin/g++ -Wl,-rpath-link,/opt/vc/lib -Wl,-rpath-link,/usr/lib/arm-linux-gnueabihf -Wl,-rpath-link,/lib/arm-linux-gnueabihf -mfloat-abi=hard -Wl,-O1 -o tslib tslib.o -lts
tslib enabled.
checking for xkbcommon...
/usr/bin/g++ -c -march=armv8-a -mtune=cortex-a53 -mfpu=crypto-neon-fp-armv8 -mfloat-abi=hard -O2 -Wall -W -fPIC -I. -I/opt/vc/include -I/opt/vc/include/interface/vcos -I/opt/vc/include/interface/vcos/pthreads -I/opt/vc/include/interface/vmcs_host/linux -I../../../mkspecs/devices/linux-rpi3-g++ -o xkbcommon.o xkbcommon.cpp
/usr/bin/g++ -Wl,-rpath-link,/opt/vc/lib -Wl,-rpath-link,/usr/lib/arm-linux-gnueabihf -Wl,-rpath-link,/lib/arm-linux-gnueabihf -mfloat-abi=hard -Wl,-O1 -o xkbcommon xkbcommon.o -lxkbcommon
xkbcommon enabled.
checking for libinput...
/usr/bin/g++ -c -march=armv8-a -mtune=cortex-a53 -mfpu=crypto-neon-fp-armv8 -mfloat-abi=hard -O2 -Wall -W -fPIC -I. -I/opt/vc/include -I/opt/vc/include/interface/vcos -I/opt/vc/include/interface/vcos/pthreads -I/opt/vc/include/interface/vmcs_host/linux -I../../../mkspecs/devices/linux-rpi3-g++ -o libinput.o libinput.cpp
/usr/bin/g++ -Wl,-rpath-link,/opt/vc/lib -Wl,-rpath-link,/usr/lib/arm-linux-gnueabihf -Wl,-rpath-link,/lib/arm-linux-gnueabihf -mfloat-abi=hard -Wl,-O1 -o libinput libinput.o -linput
libinput enabled.
checking for XLib...
/usr/bin/g++ -c -march=armv8-a -mtune=cortex-a53 -mfpu=crypto-neon-fp-armv8 -mfloat-abi=hard -O2 -Wall -W -fPIC -I. -I/opt/vc/include -I/opt/vc/include/interface/vcos -I/opt/vc/include/interface/vcos/pthreads -I/opt/vc/include/interface/vmcs_host/linux -I../../../mkspecs/devices/linux-rpi3-g++ -o xlib.o xlib.cpp
/usr/bin/g++ -Wl,-rpath-link,/opt/vc/lib -Wl,-rpath-link,/usr/lib/arm-linux-gnueabihf -Wl,-rpath-link,/lib/arm-linux-gnueabihf -mfloat-abi=hard -Wl,-O1 -o xlib xlib.o -lXext -lX11 -lm
XLib enabled.
checking for Xrender...
/usr/bin/g++ -c -march=armv8-a -mtune=cortex-a53 -mfpu=crypto-neon-fp-armv8 -mfloat-abi=hard -O2 -Wall -W -fPIC -I. -I/opt/vc/include -I/opt/vc/include/interface/vcos -I/opt/vc/include/interface/vcos/pthreads -I/opt/vc/include/interface/vmcs_host/linux -I../../../mkspecs/devices/linux-rpi3-g++ -o xrender.o xrender.cpp
xrender.cpp: In function ‘int main(int, char*)’:
xrender.cpp:48:24: warning: variable ‘format’ set but not used [-Wunused-but-set-variable]
XRenderPictFormat format;
^
/usr/bin/g++ -Wl,-rpath-link,/opt/vc/lib -Wl,-rpath-link,/usr/lib/arm-linux-gnueabihf -Wl,-rpath-link,/lib/arm-linux-gnueabihf -mfloat-abi=hard -Wl,-O1 -o xrender xrender.o -lXrender -lXext -lX11 -lm
Xrender enabled.
checking for XInput2...
/usr/bin/g++ -c -march=armv8-a -mtune=cortex-a53 -mfpu=crypto-neon-fp-armv8 -mfloat-abi=hard -O2 -Wall -W -fPIC -I. -I/opt/vc/include -I/opt/vc/include/interface/vcos -I/opt/vc/include/interface/vcos/pthreads -I/opt/vc/include/interface/vmcs_host/linux -I../../../mkspecs/devices/linux-rpi3-g++ -o xinput2.o xinput2.cpp
xinput2.cpp: In function ‘int main(int, char*)’:
xinput2.cpp:57:14: warning: variable ‘xievent’ set but not used [-Wunused-but-set-variable]
XIEvent xievent;
^
xinput2.cpp:60:20: warning: variable ‘xideviceevent’ set but not used [-Wunused-but-set-variable]
XIDeviceEvent xideviceevent;
^
xinput2.cpp:63:23: warning: variable ‘xihierarchyevent’ set but not used [-Wunused-but-set-variable]
XIHierarchyEvent xihierarchyevent;
^
/usr/bin/g++ -Wl,-rpath-link,/opt/vc/lib -Wl,-rpath-link,/usr/lib/arm-linux-gnueabihf -Wl,-rpath-link,/lib/arm-linux-gnueabihf -mfloat-abi=hard -Wl,-O1 -o xinput2 xinput2.o -lXi -lXext -lX11 -lm
XInput2 enabled.
checking for xcb...
/usr/bin/g++ -c -march=armv8-a -mtune=cortex-a53 -mfpu=crypto-neon-fp-armv8 -mfloat-abi=hard -O2 -Wall -W -fPIC -I. -I/opt/vc/include -I/opt/vc/include/interface/vcos -I/opt/vc/include/interface/vcos/pthreads -I/opt/vc/include/interface/vmcs_host/linux -I../../../mkspecs/devices/linux-rpi3-g++ -o xcb.o xcb.cpp
xcb.cpp: In function ‘int main(int, char)’:
xcb.cpp:45:23: warning: unused variable ‘t’ [-Wunused-variable]
xcb_connection_t t = xcb_connect("", &primaryScreen);
^
/usr/bin/g++ -Wl,-rpath-link,/opt/vc/lib -Wl,-rpath-link,/usr/lib/arm-linux-gnueabihf -Wl,-rpath-link,/lib/arm-linux-gnueabihf -mfloat-abi=hard -Wl,-O1 -o xcb xcb.o -lxcb
xcb enabled.
checking for xcb-xkb...
/usr/bin/g++ -c -march=armv8-a -mtune=cortex-a53 -mfpu=crypto-neon-fp-armv8 -mfloat-abi=hard -O2 -Wall -W -fPIC -I. -I/opt/vc/include -I/opt/vc/include/interface/vcos -I/opt/vc/include/interface/vcos/pthreads -I/opt/vc/include/interface/vmcs_host/linux -I../../../mkspecs/devices/linux-rpi3-g++ -o xcb-xkb.o xcb-xkb.cpp
xcb-xkb.cpp: In function ‘int main(int, char)’:
xcb-xkb.cpp:52:23: warning: unused variable ‘connection’ [-Wunused-variable]
xcb_connection_t connection = xcb_connect("", &primaryScreen);
^
xcb-xkb.cpp:55:9: warning: unused variable ‘xcbAtomPrimary’ [-Wunused-variable]
int xcbAtomPrimary = XCB_ATOM_PRIMARY;
^
/usr/bin/g++ -Wl,-rpath-link,/opt/vc/lib -Wl,-rpath-link,/usr/lib/arm-linux-gnueabihf -Wl,-rpath-link,/lib/arm-linux-gnueabihf -mfloat-abi=hard -Wl,-O1 -o xcb-xkb xcb-xkb.o -lxcb -lxcb-xkb
xcb-xkb enabled.
checking for xcb-syslibs...
/usr/bin/g++ -c -march=armv8-a -mtune=cortex-a53 -mfpu=crypto-neon-fp-armv8 -mfloat-abi=hard -O2 -Wall -W -fPIC -I. -I/opt/vc/include -I/opt/vc/include/interface/vcos -I/opt/vc/include/interface/vcos/pthreads -I/opt/vc/include/interface/vmcs_host/linux -I../../../mkspecs/devices/linux-rpi3-g++ -o xcb.o xcb.cpp
xcb.cpp: In function ‘int main(int, char*)’:
xcb.cpp:58:23: warning: unused variable ‘connection’ [-Wunused-variable]
xcb_connection_t *connection = xcb_connect("", &primaryScreen);
^
xcb.cpp:61:9: warning: unused variable ‘xcbAtomPrimary’ [-Wunused-variable]
int xcbAtomPrimary = XCB_ATOM_PRIMARY;
^
/usr/bin/g++ -Wl,-rpath-link,/opt/vc/lib -Wl,-rpath-link,/usr/lib/arm-linux-gnueabihf -Wl,-rpath-link,/lib/arm-linux-gnueabihf -mfloat-abi=hard -Wl,-O1 -o xcb-syslibs xcb.o -lxcb-render -lxcb-shm -lxcb-shape -lxcb -lxcb-image -lxcb-keysyms -lxcb-icccm -lxcb-sync -lxcb-xfixes -lxcb-randr
xcb-syslibs enabled.

? This user is from outside of this forum

checking for xcb-render...
/usr/bin/g++ -c -march=armv8-a -mtune=cortex-a53 -mfpu=crypto-neon-fp-armv8 -mfloat-abi=hard -O2 -Wall -W -fPIC -I. -I/opt/vc/include -I/opt/vc/include/interface/vcos -I/opt/vc/include/interface/vcos/pthreads -I/opt/vc/include/interface/vmcs_host/linux -I../../../mkspecs/devices/linux-rpi3-g++ -o xcb-render.o xcb-render.cpp
/usr/bin/g++ -Wl,-rpath-link,/opt/vc/lib -Wl,-rpath-link,/usr/lib/arm-linux-gnueabihf -Wl,-rpath-link,/lib/arm-linux-gnueabihf -mfloat-abi=hard -Wl,-O1 -o xcb-render xcb-render.o -lxcb-sync -lxcb-xfixes -lxcb-randr -lxcb-image -lxcb-shm -lxcb-keysyms -lxcb-icccm -lxcb-shape -lxcb -lxcb-render -lxcb-render-util
xcb-render enabled.
checking for xcb-glx...
/usr/bin/g++ -c -march=armv8-a -mtune=cortex-a53 -mfpu=crypto-neon-fp-armv8 -mfloat-abi=hard -O2 -Wall -W -fPIC -I. -I/opt/vc/include -I/opt/vc/include/interface/vcos -I/opt/vc/include/interface/vcos/pthreads -I/opt/vc/include/interface/vmcs_host/linux -I../../../mkspecs/devices/linux-rpi3-g++ -o xcb-glx.o xcb-glx.cpp
/usr/bin/g++ -Wl,-rpath-link,/opt/vc/lib -Wl,-rpath-link,/usr/lib/arm-linux-gnueabihf -Wl,-rpath-link,/lib/arm-linux-gnueabihf -mfloat-abi=hard -Wl,-O1 -o xcb-glx xcb-glx.o -lxcb-sync -lxcb-xfixes -lxcb-render -lxcb-randr -lxcb-image -lxcb-shm -lxcb-keysyms -lxcb-icccm -lxcb-shape -lxcb -lxcb-glx
xcb-glx enabled.
checking for xcb-xlib...
/usr/bin/g++ -c -march=armv8-a -mtune=cortex-a53 -mfpu=crypto-neon-fp-armv8 -mfloat-abi=hard -O2 -Wall -W -fPIC -I. -I/opt/vc/include -I/opt/vc/include/interface/vcos -I/opt/vc/include/interface/vcos/pthreads -I/opt/vc/include/interface/vmcs_host/linux -I../../../mkspecs/devices/linux-rpi3-g++ -o xcb-xlib.o xcb-xlib.cpp
xcb-xlib.cpp: In function ‘int main(int, char**)’:
xcb-xlib.cpp:47:23: warning: unused variable ‘connection’ [-Wunused-variable]
xcb_connection_t connection = XGetXCBConnection(dpy);
^
/usr/bin/g++ -Wl,-rpath-link,/opt/vc/lib -Wl,-rpath-link,/usr/lib/arm-linux-gnueabihf -Wl,-rpath-link,/lib/arm-linux-gnueabihf -mfloat-abi=hard -Wl,-O1 -o xcb-xlib xcb-xlib.o -lxcb-sync -lxcb-xfixes -lxcb-render -lxcb-randr -lxcb-image -lxcb-shm -lxcb-keysyms -lxcb-icccm -lxcb-shape -lxcb -lX11 -lX11-xcb
xcb-xlib enabled.
checking for GBM...
/usr/bin/g++ -c -march=armv8-a -mtune=cortex-a53 -mfpu=crypto-neon-fp-armv8 -mfloat-abi=hard -O2 -Wall -W -fPIC -I. -I/opt/vc/include -I/opt/vc/include/interface/vcos -I/opt/vc/include/interface/vcos/pthreads -I/opt/vc/include/interface/vmcs_host/linux -I../../../mkspecs/devices/linux-rpi3-g++ -o gbm.o gbm.cpp
gbm.cpp: In function ‘int main(int, char*)’:
gbm.cpp:48:18: warning: unused variable ‘surface’ [-Wunused-variable]
gbm_surface surface = 0;
^
/usr/bin/g++ -Wl,-rpath-link,/opt/vc/lib -Wl,-rpath-link,/usr/lib/arm-linux-gnueabihf -Wl,-rpath-link,/lib/arm-linux-gnueabihf -mfloat-abi=hard -Wl,-O1 -o gbm gbm.o -lgbm
GBM enabled.
checking for LinuxFB...
/usr/bin/g++ -c -march=armv8-a -mtune=cortex-a53 -mfpu=crypto-neon-fp-armv8 -mfloat-abi=hard -O2 -Wall -W -fPIC -I. -I/opt/vc/include -I/opt/vc/include/interface/vcos -I/opt/vc/include/interface/vcos/pthreads -I/opt/vc/include/interface/vmcs_host/linux -I../../../mkspecs/devices/linux-rpi3-g++ -o linuxfb.o linuxfb.cpp
/usr/bin/g++ -Wl,-rpath-link,/opt/vc/lib -Wl,-rpath-link,/usr/lib/arm-linux-gnueabihf -Wl,-rpath-link,/lib/arm-linux-gnueabihf -mfloat-abi=hard -Wl,-O1 -o linuxfb linuxfb.o
LinuxFB enabled.
checking for KMS...
/usr/bin/g++ -c -march=armv8-a -mtune=cortex-a53 -mfpu=crypto-neon-fp-armv8 -mfloat-abi=hard -O2 -Wall -W -fPIC -I. -I/opt/vc/include -I/opt/vc/include/interface/vcos -I/opt/vc/include/interface/vcos/pthreads -I/opt/vc/include/interface/vmcs_host/linux -isystem /usr/include/libdrm -I../../../mkspecs/devices/linux-rpi3-g++ -o kms.o kms.cpp
kms.cpp: In function ‘int main(int, char*)’:
kms.cpp:49:20: warning: unused variable ‘currentMode’ [-Wunused-variable]
drmModeCrtcPtr currentMode = drmModeGetCrtc(0, 0);
^
/usr/bin/g++ -Wl,-rpath-link,/opt/vc/lib -Wl,-rpath-link,/usr/lib/arm-linux-gnueabihf -Wl,-rpath-link,/lib/arm-linux-gnueabihf -mfloat-abi=hard -Wl,-O1 -o kms kms.o -ldrm
KMS enabled.
checking for Mir client...
Project ERROR: mirclient development package not found
Mir client disabled.
checking for EGL...
/usr/bin/g++ -c -march=armv8-a -mtune=cortex-a53 -mfpu=crypto-neon-fp-armv8 -mfloat-abi=hard -O2 -Wall -W -fPIC -I. -I/opt/vc/include -I/opt/vc/include/interface/vcos -I/opt/vc/include/interface/vcos/pthreads -I/opt/vc/include/interface/vmcs_host/linux -isystem /usr/include/libdrm -I=/opt/vc/include -I=/opt/vc/include/interface/vcos/pthreads -I=/opt/vc/include/interface/vmcs_host/linux -I../../../mkspecs/devices/linux-rpi3-g++ -o egl.o egl.cpp
egl.cpp: In function ‘int main(int, char**)’:
egl.cpp:44:12: warning: unused variable ‘x’ [-Wunused-variable]
EGLint x = 0;
^
/usr/bin/g++ -Wl,-rpath-link,/opt/vc/lib -Wl,-rpath-link,/usr/lib/arm-linux-gnueabihf -Wl,-rpath-link,/lib/arm-linux-gnueabihf -mfloat-abi=hard -Wl,-O1 -o egl egl.o -L=/opt/vc/lib -Wl,-rpath-link,/opt/vc/lib -lEGL -lGLESv2
EGL enabled.
checking for EGL-X11...
/usr/bin/g++ -c -march=armv8-a -mtune=cortex-a53 -mfpu=crypto-neon-fp-armv8 -mfloat-abi=hard -O2 -Wall -W -fPIC -I. -I/opt/vc/include -I/opt/vc/include/interface/vcos -I/opt/vc/include/interface/vcos/pthreads -I/opt/vc/include/interface/vmcs_host/linux -isystem /usr/include/libdrm -I=/opt/vc/include -I=/opt/vc/include/interface/vcos/pthreads -I=/opt/vc/include/interface/vmcs_host/linux -I../../../mkspecs/devices/linux-rpi3-g++ -o egl-x11.o egl-x11.cpp
In file included from egl-x11.cpp:40:0:
egl-x11.cpp: In function ‘int main(int, char**)’:
/opt/vc/include/EGL/egl.h:68:54: error: invalid conversion from ‘EGLNativeDisplayType {aka void*}’ to ‘Display* {aka _XDisplay*}’ [-fpermissive]
#define EGL_DEFAULT_DISPLAY ((EGLNativeDisplayType)0)
^
egl-x11.cpp:53:20: note: in expansion of macro ‘EGL_DEFAULT_DISPLAY’
Display dpy = EGL_DEFAULT_DISPLAY;
^
egl-x11.cpp:55:9: error: invalid conversion from ‘EGLNativeDisplayType {aka void}’ to ‘Display* {aka _XDisplay*}’ [-fpermissive]
dpy = egldpy;
^
egl-x11.cpp:56:79: error: invalid conversion from ‘Window {aka long unsigned int}’ to ‘EGLNativeWindowType {aka void*}’ [-fpermissive]
EGLNativeWindowType w = XCreateWindow(dpy, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0);
^
egl-x11.cpp:57:26: error: invalid conversion from ‘EGLNativeWindowType {aka void*}’ to ‘Window {aka long unsigned int}’ [-fpermissive]
XDestroyWindow(dpy, w);
^
In file included from egl-x11.cpp:42:0:
/usr/include/X11/Xlib.h:2255:12: note: initializing argument 2 of ‘int XDestroyWindow(Display*, Window)’
extern int XDestroyWindow(
^
Makefile:255: recipe for target 'egl-x11.o' failed
make: *** [egl-x11.o] Error 1
EGL-X11 disabled.
checking for eglfs-brcm...
/usr/bin/g++ -c -march=armv8-a -mtune=cortex-a53 -mfpu=crypto-neon-fp-armv8 -mfloat-abi=hard -O2 -Wall -W -fPIC -I. -I/opt/vc/include -I/opt/vc/include/interface/vcos -I/opt/vc/include/interface/vcos/pthreads -I/opt/vc/include/interface/vmcs_host/linux -I=/opt/vc/include -I=/opt/vc/include/interface/vcos/pthreads -I=/opt/vc/include/interface/vmcs_host/linux -I../../../mkspecs/devices/linux-rpi3-g++ -o eglfs-brcm.o eglfs-brcm.cpp
/usr/bin/g++ -Wl,-rpath-link,/opt/vc/lib -Wl,-rpath-link,/usr/lib/arm-linux-gnueabihf -Wl,-rpath-link,/lib/arm-linux-gnueabihf -mfloat-abi=hard -Wl,-O1 -o eglfs-brcm eglfs-brcm.o -L=/opt/vc/lib -lEGL -lGLESv2 -lbcm_host
eglfs-brcm enabled.
checking for eglfs-egldevice...
/usr/bin/g++ -c -march=armv8-a -mtune=cortex-a53 -mfpu=crypto-neon-fp-armv8 -mfloat-abi=hard -O2 -Wall -W -fPIC -I. -I/opt/vc/include -I/opt/vc/include/interface/vcos -I/opt/vc/include/interface/vcos/pthreads -I/opt/vc/include/interface/vmcs_host/linux -I=/opt/vc/include -I=/opt/vc/include/interface/vcos/pthreads -I=/opt/vc/include/interface/vmcs_host/linux -isystem /usr/include/libdrm -I../../../mkspecs/devices/linux-rpi3-g++ -o eglfs-egldevice.o eglfs-egldevice.cpp
eglfs-egldevice.cpp: In function ‘int main(int, char**)’:
eglfs-egldevice.cpp:54:5: error: ‘EGLDeviceEXT’ was not declared in this scope
EGLDeviceEXT device = 0;
^
eglfs-egldevice.cpp:55:5: error: ‘EGLStreamKHR’ was not declared in this scope
EGLStreamKHR stream = 0;
^
eglfs-egldevice.cpp:56:5: error: ‘EGLOutputLayerEXT’ was not declared in this scope
EGLOutputLayerEXT layer = 0;
^
eglfs-egldevice.cpp:58:12: error: ‘EGL_DRM_CRTC_EXT’ was not declared in this scope
return EGL_DRM_CRTC_EXT;
^
eglfs-egldevice.cpp:57:20: warning: unused variable ‘currentMode’ [-Wunused-variable]
drmModeCrtcPtr currentMode = drmModeGetCrtc(0, 0);
^
Makefile:262: recipe for target 'eglfs-egldevice.o' failed
make: *** [eglfs-egldevice.o] Error 1
eglfs-egldevice disabled.
checking for eglfs-mali...
/usr/bin/g++ -c -march=armv8-a -mtune=cortex-a53 -mfpu=crypto-neon-fp-armv8 -mfloat-abi=hard -O2 -Wall -W -fPIC -I. -I/opt/vc/include -I/opt/vc/include/interface/vcos -I/opt/vc/include/interface/vcos/pthreads -I/opt/vc/include/interface/vmcs_host/linux -I../../../mkspecs/devices/linux-rpi3-g++ -o eglfs-mali.o eglfs-mali.cpp
eglfs-mali.cpp:40:30: fatal error: EGL/fbdev_window.h: No such file or directory
#include <EGL/fbdev_window.h>
^
compilation terminated.
Makefile:257: recipe for target 'eglfs-mali.o' failed
make: *** [eglfs-mali.o] Error 1
eglfs-mali disabled.
checking for eglfs-mali-2...
/usr/bin/g++ -c -march=armv8-a -mtune=cortex-a53 -mfpu=crypto-neon-fp-armv8 -mfloat-abi=hard -O2 -Wall -W -fPIC -I. -I/opt/vc/include -I/opt/vc/include/interface/vcos -I/opt/vc/include/interface/vcos/pthreads -I/opt/vc/include/interface/vmcs_host/linux -I../../../mkspecs/devices/linux-rpi3-g++ -o eglfs-mali-2.o eglfs-mali-2.cpp
eglfs-mali-2.cpp: In function ‘int main(int, char**)’:
eglfs-mali-2.cpp:47:5: error: ‘mali_native_window’ was not declared in this scope
mali_native_window *w = 0;
^
eglfs-mali-2.cpp:47:25: error: ‘w’ was not declared in this scope
mali_native_window *w = 0;
^
Makefile:257: recipe for target 'eglfs-mali-2.o' failed
make: *** [eglfs-mali-2.o] Error 1
eglfs-mali-2 disabled.
checking for eglfs-viv...
/usr/bin/g++ -c -march=armv8-a -mtune=cortex-a53 -mfpu=crypto-neon-fp-armv8 -mfloat-abi=hard -O2 -Wall -W -fPIC -DLINUX=1 -DEGL_API_FB=1 -I. -I/opt/vc/include -I/opt/vc/include/interface/vcos -I/opt/vc/include/interface/vcos/pthreads -I/opt/vc/include/interface/vmcs_host/linux -I=/opt/vc/include -I=/opt/vc/include/interface/vcos/pthreads -I=/opt/vc/include/interface/vmcs_host/linux -I../../../mkspecs/devices/linux-rpi3-g++ -o eglfs-viv.o eglfs-viv.cpp
eglfs-viv.cpp:41:28: fatal error: EGL/eglvivante.h: No such file or directory
#include <EGL/eglvivante.h>
^
compilation terminated.

? This user is from outside of this forum

Makefile:257: recipe for target 'eglfs-viv.o' failed
make: *** [eglfs-viv.o] Error 1
eglfs-viv disabled.
checking for DoubleConversion...
/usr/bin/g++ -c -march=armv8-a -mtune=cortex-a53 -mfpu=crypto-neon-fp-armv8 -mfloat-abi=hard -O2 -Wall -W -fPIC -I. -I/opt/vc/include -I/opt/vc/include/interface/vcos -I/opt/vc/include/interface/vcos/pthreads -I/opt/vc/include/interface/vmcs_host/linux -I../../../mkspecs/devices/linux-rpi3-g++ -o doubleconversion.o doubleconversion.cpp
doubleconversion.cpp:40:49: fatal error: double-conversion/double-conversion.h: No such file or directory
#include <double-conversion/double-conversion.h>
^
compilation terminated.
Makefile:198: recipe for target 'doubleconversion.o' failed
make: *** [doubleconversion.o] Error 1
DoubleConversion disabled.
checking for HarfBuzz...
/usr/bin/g++ -c -march=armv8-a -mtune=cortex-a53 -mfpu=crypto-neon-fp-armv8 -mfloat-abi=hard -O2 -Wall -W -fPIC -I. -I/opt/vc/include -I/opt/vc/include/interface/vcos -I/opt/vc/include/interface/vcos/pthreads -I/opt/vc/include/interface/vmcs_host/linux -I../../../mkspecs/devices/linux-rpi3-g++ -o harfbuzz.o harfbuzz.cpp
harfbuzz.cpp:43:4: error: #error "This version of harfbuzz is too old."

error "This version of harfbuzz is too old."

Makefile:198: recipe for target 'harfbuzz.o' failed
make: *** [harfbuzz.o] Error 1
HarfBuzz disabled.
checking for STL...
/usr/bin/g++ -c -march=armv8-a -mtune=cortex-a53 -mfpu=crypto-neon-fp-armv8 -mfloat-abi=hard -O2 -Wall -W -fPIC -I. -I/opt/vc/include -I/opt/vc/include/interface/vcos -I/opt/vc/include/interface/vcos/pthreads -I/opt/vc/include/interface/vmcs_host/linux -I../../../mkspecs/devices/linux-rpi3-g++ -o stltest.o stltest.cpp
stltest.cpp: In function ‘int main()’:
stltest.cpp:134:13: warning: variable ‘first’ set but not used [-Wunused-but-set-variable]
int first = (*m1it).first;
^
stltest.cpp:136:16: warning: variable ‘second’ set but not used [-Wunused-but-set-variable]
double second = (*m1it).second;
^
stltest.cpp:107:9: warning: variable ‘v1size’ set but not used [-Wunused-but-set-variable]
int v1size = v1.size();
^
stltest.cpp:109:9: warning: variable ‘v1capacity’ set but not used [-Wunused-but-set-variable]
int v1capacity = v1.capacity();
^
stltest.cpp:113:10: warning: variable ‘v1notfound’ set but not used [-Wunused-but-set-variable]
bool v1notfound = (v1it == v1.end());
^
stltest.cpp:117:10: warning: variable ‘v1found’ set but not used [-Wunused-but-set-variable]
bool v1found = (v1it != v1.end());
^
stltest.cpp:122:9: warning: variable ‘v2size’ set but not used [-Wunused-but-set-variable]
int v2size = v2.size();
^
stltest.cpp:130:9: warning: variable ‘m1size’ set but not used [-Wunused-but-set-variable]
int m1size = m1.size();
^
stltest.cpp:140:9: warning: variable ‘m2size’ set but not used [-Wunused-but-set-variable]
int m2size = m2.size();
^
stltest.cpp:144:9: warning: unused variable ‘n’ [-Wunused-variable]
int n = std::distance(it1, it2);
^
/usr/bin/g++ -Wl,-rpath-link,/opt/vc/lib -Wl,-rpath-link,/usr/lib/arm-linux-gnueabihf -Wl,-rpath-link,/lib/arm-linux-gnueabihf -mfloat-abi=hard -Wl,-O1 -o stl stltest.o
STL enabled.
checking for POSIX clock_gettime()...
/usr/bin/g++ -c -march=armv8-a -mtune=cortex-a53 -mfpu=crypto-neon-fp-armv8 -mfloat-abi=hard -O2 -Wall -W -fPIC -I. -I/opt/vc/include -I/opt/vc/include/interface/vcos -I/opt/vc/include/interface/vcos/pthreads -I/opt/vc/include/interface/vmcs_host/linux -I../../../mkspecs/devices/linux-rpi3-g++ -o clock-gettime.o clock-gettime.cpp
/usr/bin/g++ -Wl,-rpath-link,/opt/vc/lib -Wl,-rpath-link,/usr/lib/arm-linux-gnueabihf -Wl,-rpath-link,/lib/arm-linux-gnueabihf -mfloat-abi=hard -Wl,-O1 -o clock-gettime clock-gettime.o -lrt
POSIX clock_gettime() enabled.
checking for POSIX Monotonic Clock...
/usr/bin/g++ -c -march=armv8-a -mtune=cortex-a53 -mfpu=crypto-neon-fp-armv8 -mfloat-abi=hard -O2 -Wall -W -fPIC -I. -I/opt/vc/include -I/opt/vc/include/interface/vcos -I/opt/vc/include/interface/vcos/pthreads -I/opt/vc/include/interface/vmcs_host/linux -I../../../mkspecs/devices/linux-rpi3-g++ -o clock-monotonic.o clock-monotonic.cpp
/usr/bin/g++ -Wl,-rpath-link,/opt/vc/lib -Wl,-rpath-link,/usr/lib/arm-linux-gnueabihf -Wl,-rpath-link,/lib/arm-linux-gnueabihf -mfloat-abi=hard -Wl,-O1 -o clock-monotonic clock-monotonic.o -lrt
POSIX Monotonic Clock enabled.
checking for posix_fallocate...
/usr/bin/g++ -c -march=armv8-a -mtune=cortex-a53 -mfpu=crypto-neon-fp-armv8 -mfloat-abi=hard -O2 -Wall -W -fPIC -I. -I/opt/vc/include -I/opt/vc/include/interface/vcos -I/opt/vc/include/interface/vcos/pthreads -I/opt/vc/include/interface/vmcs_host/linux -I../../../mkspecs/devices/linux-rpi3-g++ -o posix_fallocate.o posix_fallocate.cpp
/usr/bin/g++ -Wl,-rpath-link,/opt/vc/lib -Wl,-rpath-link,/usr/lib/arm-linux-gnueabihf -Wl,-rpath-link,/lib/arm-linux-gnueabihf -mfloat-abi=hard -Wl,-O1 -o posix_fallocate posix_fallocate.o
posix_fallocate enabled.
checking for mremap...
/usr/bin/g++ -c -march=armv8-a -mtune=cortex-a53 -mfpu=crypto-neon-fp-armv8 -mfloat-abi=hard -O2 -Wall -W -fPIC -I. -I/opt/vc/include -I/opt/vc/include/interface/vcos -I/opt/vc/include/interface/vcos/pthreads -I/opt/vc/include/interface/vmcs_host/linux -I../../../mkspecs/devices/linux-rpi3-g++ -o mremap.o mremap.cpp
/usr/bin/g++ -Wl,-rpath-link,/opt/vc/lib -Wl,-rpath-link,/usr/lib/arm-linux-gnueabihf -Wl,-rpath-link,/lib/arm-linux-gnueabihf -mfloat-abi=hard -Wl,-O1 -o mremap mremap.o
mremap enabled.
checking for getaddrinfo...
/usr/bin/g++ -c -march=armv8-a -mtune=cortex-a53 -mfpu=crypto-neon-fp-armv8 -mfloat-abi=hard -O2 -Wall -W -fPIC -I. -I/opt/vc/include -I/opt/vc/include/interface/vcos -I/opt/vc/include/interface/vcos/pthreads -I/opt/vc/include/interface/vmcs_host/linux -I../../../mkspecs/devices/linux-rpi3-g++ -o getaddrinfotest.o getaddrinfotest.cpp
/usr/bin/g++ -Wl,-rpath-link,/opt/vc/lib -Wl,-rpath-link,/usr/lib/arm-linux-gnueabihf -Wl,-rpath-link,/lib/arm-linux-gnueabihf -mfloat-abi=hard -Wl,-O1 -o getaddrinfo getaddrinfotest.o
getaddrinfo enabled.
checking for inotify...
/usr/bin/g++ -c -march=armv8-a -mtune=cortex-a53 -mfpu=crypto-neon-fp-armv8 -mfloat-abi=hard -O2 -Wall -W -fPIC -I. -I/opt/vc/include -I/opt/vc/include/interface/vcos -I/opt/vc/include/interface/vcos/pthreads -I/opt/vc/include/interface/vmcs_host/linux -I../../../mkspecs/devices/linux-rpi3-g++ -o inotifytest.o inotifytest.cpp
/usr/bin/g++ -Wl,-rpath-link,/opt/vc/lib -Wl,-rpath-link,/usr/lib/arm-linux-gnueabihf -Wl,-rpath-link,/lib/arm-linux-gnueabihf -mfloat-abi=hard -Wl,-O1 -o inotify inotifytest.o
inotify enabled.
checking for eventfd...
/usr/bin/g++ -c -march=armv8-a -mtune=cortex-a53 -mfpu=crypto-neon-fp-armv8 -mfloat-abi=hard -O2 -Wall -W -fPIC -I. -I/opt/vc/include -I/opt/vc/include/interface/vcos -I/opt/vc/include/interface/vcos/pthreads -I/opt/vc/include/interface/vmcs_host/linux -I../../../mkspecs/devices/linux-rpi3-g++ -o main.o main.cpp
/usr/bin/g++ -Wl,-rpath-link,/opt/vc/lib -Wl,-rpath-link,/usr/lib/arm-linux-gnueabihf -Wl,-rpath-link,/lib/arm-linux-gnueabihf -mfloat-abi=hard -Wl,-O1 -o eventfd main.o
eventfd enabled.
checking for IPv6 interface name...
/usr/bin/g++ -c -march=armv8-a -mtune=cortex-a53 -mfpu=crypto-neon-fp-armv8 -mfloat-abi=hard -O2 -Wall -W -fPIC -I. -I/opt/vc/include -I/opt/vc/include/interface/vcos -I/opt/vc/include/interface/vcos/pthreads -I/opt/vc/include/interface/vmcs_host/linux -I../../../mkspecs/devices/linux-rpi3-g++ -o ipv6ifname.o ipv6ifname.cpp
/usr/bin/g++ -Wl,-rpath-link,/opt/vc/lib -Wl,-rpath-link,/usr/lib/arm-linux-gnueabihf -Wl,-rpath-link,/lib/arm-linux-gnueabihf -mfloat-abi=hard -Wl,-O1 -o ipv6ifname ipv6ifname.o
IPv6 interface name enabled.
checking for getifaddrs...
/usr/bin/g++ -c -march=armv8-a -mtune=cortex-a53 -mfpu=crypto-neon-fp-armv8 -mfloat-abi=hard -O2 -Wall -W -fPIC -I. -I/opt/vc/include -I/opt/vc/include/interface/vcos -I/opt/vc/include/interface/vcos/pthreads -I/opt/vc/include/interface/vmcs_host/linux -I../../../mkspecs/devices/linux-rpi3-g++ -o getifaddrs.o getifaddrs.cpp
/usr/bin/g++ -Wl,-rpath-link,/opt/vc/lib -Wl,-rpath-link,/usr/lib/arm-linux-gnueabihf -Wl,-rpath-link,/lib/arm-linux-gnueabihf -mfloat-abi=hard -Wl,-O1 -o getifaddrs getifaddrs.o
getifaddrs enabled.
checking for cloexec...
/usr/bin/g++ -c -march=armv8-a -mtune=cortex-a53 -mfpu=crypto-neon-fp-armv8 -mfloat-abi=hard -O2 -Wall -W -fPIC -I. -I/opt/vc/include -I/opt/vc/include/interface/vcos -I/opt/vc/include/interface/vcos/pthreads -I/opt/vc/include/interface/vmcs_host/linux -I../../../mkspecs/devices/linux-rpi3-g++ -o cloexec.o cloexec.cpp
/usr/bin/g++ -Wl,-rpath-link,/opt/vc/lib -Wl,-rpath-link,/usr/lib/arm-linux-gnueabihf -Wl,-rpath-link,/lib/arm-linux-gnueabihf -mfloat-abi=hard -Wl,-O1 -o cloexec cloexec.o
cloexec enabled.
checking for ppoll...
/usr/bin/g++ -c -march=armv8-a -mtune=cortex-a53 -mfpu=crypto-neon-fp-armv8 -mfloat-abi=hard -O2 -Wall -W -fPIC -I. -I/opt/vc/include -I/opt/vc/include/interface/vcos -I/opt/vc/include/interface/vcos/pthreads -I/opt/vc/include/interface/vmcs_host/linux -I../../../mkspecs/devices/linux-rpi3-g++ -o ppoll.o ppoll.cpp
ppoll.cpp:55:5: warning: identifier ‘nullptr’ is a keyword in C++11 [-Wc++0x-compat]
return ::ppoll(&pfd, 1, &ts, nullptr);
^
ppoll.cpp: In function ‘int main()’:
ppoll.cpp:55:34: error: ‘nullptr’ was not declared in this scope
return ::ppoll(&pfd, 1, &ts, nullptr);
^
Makefile:198: recipe for target 'ppoll.o' failed
make: *** [ppoll.o] Error 1
ppoll disabled.

? This user is from outside of this forum

checking for pollts...
/usr/bin/g++ -c -march=armv8-a -mtune=cortex-a53 -mfpu=crypto-neon-fp-armv8 -mfloat-abi=hard -O2 -Wall -W -fPIC -I. -I/opt/vc/include -I/opt/vc/include/interface/vcos -I/opt/vc/include/interface/vcos/pthreads -I/opt/vc/include/interface/vmcs_host/linux -I../../../mkspecs/devices/linux-rpi3-g++ -o pollts.o pollts.cpp
pollts.cpp:56:5: warning: identifier ‘nullptr’ is a keyword in C++11 [-Wc++0x-compat]
return ::pollts(&pfd, 1, &ts, nullptr);
^
pollts.cpp: In function ‘int main()’:
pollts.cpp:56:12: error: ‘::pollts’ has not been declared
return ::pollts(&pfd, 1, &ts, nullptr);
^
pollts.cpp:56:35: error: ‘nullptr’ was not declared in this scope
return ::pollts(&pfd, 1, &ts, nullptr);
^
Makefile:198: recipe for target 'pollts.o' failed
make: *** [pollts.o] Error 1
pollts disabled.
checking for poll...
/usr/bin/g++ -c -march=armv8-a -mtune=cortex-a53 -mfpu=crypto-neon-fp-armv8 -mfloat-abi=hard -O2 -Wall -W -fPIC -I. -I/opt/vc/include -I/opt/vc/include/interface/vcos -I/opt/vc/include/interface/vcos/pthreads -I/opt/vc/include/interface/vmcs_host/linux -I../../../mkspecs/devices/linux-rpi3-g++ -o poll.o poll.cpp
/usr/bin/g++ -Wl,-rpath-link,/opt/vc/lib -Wl,-rpath-link,/usr/lib/arm-linux-gnueabihf -Wl,-rpath-link,/lib/arm-linux-gnueabihf -mfloat-abi=hard -Wl,-O1 -o poll poll.o
poll enabled.
checking for OpenSSL...
/usr/bin/g++ -c -march=armv8-a -mtune=cortex-a53 -mfpu=crypto-neon-fp-armv8 -mfloat-abi=hard -O2 -Wall -W -fPIC -I. -I/opt/vc/include -I/opt/vc/include/interface/vcos -I/opt/vc/include/interface/vcos/pthreads -I/opt/vc/include/interface/vmcs_host/linux -I../../../mkspecs/devices/linux-rpi3-g++ -o openssl.o openssl.cpp
/usr/bin/g++ -Wl,-rpath-link,/opt/vc/lib -Wl,-rpath-link,/usr/lib/arm-linux-gnueabihf -Wl,-rpath-link,/lib/arm-linux-gnueabihf -mfloat-abi=hard -Wl,-O1 -o openssl openssl.o
OpenSSL enabled.
checking for OpenVG...
/usr/bin/g++ -c -march=armv8-a -mtune=cortex-a53 -mfpu=crypto-neon-fp-armv8 -mfloat-abi=hard -O2 -Wall -W -fPIC -I. -I/opt/vc/include -I/opt/vc/include/interface/vcos -I/opt/vc/include/interface/vcos/pthreads -I/opt/vc/include/interface/vmcs_host/linux -I../../../mkspecs/devices/linux-rpi3-g++ -o openvg.o openvg.cpp
openvg.cpp: In function ‘int main(int, char**)’:
openvg.cpp:51:11: warning: variable ‘i’ set but not used [-Wunused-but-set-variable]
VGint i;
^
/usr/bin/g++ -Wl,-rpath-link,/opt/vc/lib -Wl,-rpath-link,/usr/lib/arm-linux-gnueabihf -Wl,-rpath-link,/lib/arm-linux-gnueabihf -mfloat-abi=hard -Wl,-O1 -o openvg openvg.o -L=/opt/vc/lib -lOpenVG
/opt/vc/lib/libEGL.so: undefined reference to glxx_client_GetRenderbufferParameteriv' /opt/vc/lib/libEGL.so: undefined reference to gl20_client_state_init'
/opt/vc/lib/libEGL.so: undefined reference to gl11_client_state_init' /opt/vc/lib/libEGL.so: undefined reference to glintAttribPointer'
/opt/vc/lib/libEGL.so: undefined reference to glxx_client_GenFramebuffers' /opt/vc/lib/libEGL.so: undefined reference to glxx_buffer_info_get'
/opt/vc/lib/libEGL.so: undefined reference to glDiscardFramebufferEXT' /opt/vc/lib/libEGL.so: undefined reference to glxx_client_FramebufferTexture2D'
/opt/vc/lib/libEGL.so: undefined reference to glxx_client_IsRenderbuffer' /opt/vc/lib/libEGL.so: undefined reference to glxx_set_error'
/opt/vc/lib/libEGL.so: undefined reference to glxx_client_BindFramebuffer' /opt/vc/lib/libEGL.so: undefined reference to glxx_client_GenRenderbuffers'
/opt/vc/lib/libEGL.so: undefined reference to glxx_set_error_api' /opt/vc/lib/libEGL.so: undefined reference to glxx_client_BindRenderbuffer'
/opt/vc/lib/libEGL.so: undefined reference to glBufferSubData' /opt/vc/lib/libEGL.so: undefined reference to glxx_client_GetFramebufferAttachmentParameteriv'
/opt/vc/lib/libEGL.so: undefined reference to glxx_client_CheckFramebufferStatus' /opt/vc/lib/libEGL.so: undefined reference to glxx_client_FramebufferRenderbuffer'
/opt/vc/lib/libEGL.so: undefined reference to glxx_client_RenderbufferStorage' /opt/vc/lib/libEGL.so: undefined reference to glxx_client_DeleteRenderbuffers'
/opt/vc/lib/libEGL.so: undefined reference to glxx_client_GenerateMipmap' /opt/vc/lib/libEGL.so: undefined reference to glxx_buffer_info_set'
/opt/vc/lib/libEGL.so: undefined reference to glPointSizePointerOES' /opt/vc/lib/libEGL.so: undefined reference to glxx_client_DeleteFramebuffers'
/opt/vc/lib/libEGL.so: undefined reference to glxx_client_IsFramebuffer' /opt/vc/lib/libEGL.so: undefined reference to glxx_client_state_free'
collect2: error: ld returned 1 exit status
Makefile:92: recipe for target 'openvg' failed
make: *** [openvg] Error 1
OpenVG disabled.
checking for OpenVG...
/usr/bin/g++ -c -march=armv8-a -mtune=cortex-a53 -mfpu=crypto-neon-fp-armv8 -mfloat-abi=hard -O2 -Wall -W -fPIC -I. -I/opt/vc/include -I/opt/vc/include/interface/vcos -I/opt/vc/include/interface/vcos/pthreads -I/opt/vc/include/interface/vmcs_host/linux -I../../../mkspecs/devices/linux-rpi3-g++ -o openvg.o openvg.cpp
openvg.cpp: In function ‘int main(int, char**)’:
openvg.cpp:51:11: warning: variable ‘i’ set but not used [-Wunused-but-set-variable]
VGint i;
^
/usr/bin/g++ -Wl,-rpath-link,/opt/vc/lib -Wl,-rpath-link,/usr/lib/arm-linux-gnueabihf -Wl,-rpath-link,/lib/arm-linux-gnueabihf -mfloat-abi=hard -Wl,-O1 -o openvg openvg.o -L=/opt/vc/lib -lOpenVG -lGL
/opt/vc/lib/libEGL.so: undefined reference to glDiscardFramebufferEXT' /opt/vc/lib/libEGL.so: undefined reference to glxx_set_error_api'
/opt/vc/lib/libEGL.so: undefined reference to glxx_client_BindFramebuffer' /opt/vc/lib/libEGL.so: undefined reference to glintAttribPointer'
/opt/vc/lib/libEGL.so: undefined reference to glxx_client_state_free' /opt/vc/lib/libEGL.so: undefined reference to glxx_client_FramebufferRenderbuffer'
/opt/vc/lib/libEGL.so: undefined reference to glxx_buffer_info_set' /opt/vc/lib/libEGL.so: undefined reference to glxx_set_error'
/opt/vc/lib/libEGL.so: undefined reference to glxx_client_DeleteFramebuffers' /opt/vc/lib/libEGL.so: undefined reference to gl11_client_state_init'
/opt/vc/lib/libEGL.so: undefined reference to glxx_client_GetFramebufferAttachmentParameteriv' /opt/vc/lib/libEGL.so: undefined reference to glxx_client_IsRenderbuffer'
/opt/vc/lib/libEGL.so: undefined reference to glxx_client_GetRenderbufferParameteriv' /opt/vc/lib/libEGL.so: undefined reference to glxx_client_DeleteRenderbuffers'
/opt/vc/lib/libEGL.so: undefined reference to glxx_client_FramebufferTexture2D' /opt/vc/lib/libEGL.so: undefined reference to glxx_client_BindRenderbuffer'
/opt/vc/lib/libEGL.so: undefined reference to glxx_client_GenerateMipmap' /opt/vc/lib/libEGL.so: undefined reference to glxx_client_RenderbufferStorage'
/opt/vc/lib/libEGL.so: undefined reference to glxx_client_GenFramebuffers' /opt/vc/lib/libEGL.so: undefined reference to glxx_client_GenRenderbuffers'
/opt/vc/lib/libEGL.so: undefined reference to glxx_client_CheckFramebufferStatus' /opt/vc/lib/libEGL.so: undefined reference to gl20_client_state_init'
/opt/vc/lib/libEGL.so: undefined reference to glxx_buffer_info_get' /opt/vc/lib/libEGL.so: undefined reference to glxx_client_IsFramebuffer'
collect2: error: ld returned 1 exit status
Makefile:92: recipe for target 'openvg' failed
make: *** [openvg] Error 1
OpenVG disabled.
checking for OpenVG (lc includes)...
/usr/bin/g++ -c -march=armv8-a -mtune=cortex-a53 -mfpu=crypto-neon-fp-armv8 -mfloat-abi=hard -O2 -Wall -W -fPIC -DQT_LOWER_CASE_VG_INCLUDES -I. -I/opt/vc/include -I/opt/vc/include/interface/vcos -I/opt/vc/include/interface/vcos/pthreads -I/opt/vc/include/interface/vmcs_host/linux -I../../../mkspecs/devices/linux-rpi3-g++ -o openvg.o openvg.cpp
openvg.cpp:44:23: fatal error: vg/openvg.h: No such file or directory
#include <vg/openvg.h>
^
compilation terminated.
Makefile:203: recipe for target 'openvg.o' failed
make: *** [openvg.o] Error 1
OpenVG (lc includes) disabled.
checking for OpenVG (lc includes)...
/usr/bin/g++ -c -march=armv8-a -mtune=cortex-a53 -mfpu=crypto-neon-fp-armv8 -mfloat-abi=hard -O2 -Wall -W -fPIC -DQT_LOWER_CASE_VG_INCLUDES -I. -I/opt/vc/include -I/opt/vc/include/interface/vcos -I/opt/vc/include/interface/vcos/pthreads -I/opt/vc/include/interface/vmcs_host/linux -I../../../mkspecs/devices/linux-rpi3-g++ -o openvg.o openvg.cpp
openvg.cpp:44:23: fatal error: vg/openvg.h: No such file or directory
#include <vg/openvg.h>
^
compilation terminated.
Makefile:203: recipe for target 'openvg.o' failed
make: *** [openvg.o] Error 1
OpenVG (lc includes) disabled.
checking for alsa...
/usr/bin/g++ -c -march=armv8-a -mtune=cortex-a53 -mfpu=crypto-neon-fp-armv8 -mfloat-abi=hard -O2 -Wall -W -fPIC -I. -I/opt/vc/include -I/opt/vc/include/interface/vcos -I/opt/vc/include/interface/vcos/pthreads -I/opt/vc/include/interface/vmcs_host/linux -I../../../mkspecs/devices/linux-rpi3-g++ -o alsatest.o alsatest.cpp
alsatest.cpp:45:14: warning: unused parameter ‘argc’ [-Wunused-parameter]
int main(int argc,char **argv)
^
alsatest.cpp:45:26: warning: unused parameter ‘argv’ [-Wunused-parameter]
int main(int argc,char **argv)
^
/usr/bin/g++ -Wl,-rpath-link,/opt/vc/lib -Wl,-rpath-link,/usr/lib/arm-linux-gnueabihf -Wl,-rpath-link,/lib/arm-linux-gnueabihf -mfloat-abi=hard -Wl,-O1 -o alsa alsatest.o -lasound
alsa enabled.
checking for GStreamer 1.0...
Project ERROR: gstreamer-1.0 development package not found
GStreamer 1.0 disabled.
checking for GStreamer 0.10...
/usr/bin/g++ -c -march=armv8-a -mtune=cortex-a53 -mfpu=crypto-neon-fp-armv8 -mfloat-abi=hard -O2 -pthread -pthread -pthread -pthread -pthread -Wall -W -fPIC -I. -I/opt/vc/include -I/opt/vc/include/interface/vcos -I/opt/vc/include/interface/vcos/pthreads -I/opt/vc/include/interface/vmcs_host/linux -isystem /usr/include/gstreamer-0.10 -isystem /usr/include/glib-2.0 -I/usr/lib/arm-linux-gnueabihf/glib-2.0/include -isystem /usr/include/libxml2 -I../../../mkspecs/devices/linux-rpi3-g++ -o gstreamer.o gstreamer.cpp
/usr/bin/g++ -Wl,-rpath-link,/opt/vc/lib -Wl,-rpath-link,/usr/lib/arm-linux-gnueabihf -Wl,-rpath-link,/lib/arm-linux-gnueabihf -mfloat-abi=hard -Wl,-O1 -o gstreamer gstreamer.o -lgstaudio-0.10 -lgstinterfaces-0.10 -lgstvideo-0.10 -lgstbase-0.10 -lgstpbutils-0.10 -lgstreamer-0.10 -lgobject-2.0 -lgmodule-2.0 -lgthread-2.0 -pthread -lglib-2.0 -lxml2
GStreamer 0.10 enabled.
Done running configuration tests.

Configure summary

? This user is from outside of this forum

Building on: linux-g++ (arm, CPU features: none detected)
Building for: devices/linux-rpi3-g++ (arm, CPU features: neon)
Platform notes:

        - Also available for Linux: linux-clang linux-kcc linux-icc linux-cxx

qmake vars .......... styles += mac fusion windows CONFIG += use_libmysqlclient_r QT_LIBS_DBUS = -ldbus-1 QT_CFLAGS_DBUS = -I/usr/include/dbus-1.0 -I/usr/lib/arm-linux-gnueabihf/dbus-1.0/include QT_HOST_CFLAGS_DBUS = -I/usr/include/dbus-1.0 -I/usr/lib/arm-linux-gnueabihf/dbus-1.0/include QT_CFLAGS_GLIB = -pthread -I/usr/include/glib-2.0 -I/usr/lib/arm-linux-gnueabihf/glib-2.0/include QT_LIBS_GLIB = -lgthread-2.0 -pthread -lglib-2.0 QT_CFLAGS_PULSEAUDIO = -D_REENTRANT -I/usr/include/glib-2.0 -I/usr/lib/arm-linux-gnueabihf/glib-2.0/include QT_LIBS_PULSEAUDIO = -lpulse-mainloop-glib -lpulse -lglib-2.0 QMAKE_INCDIR_OPENGL_ES2 = QMAKE_LIBDIR_OPENGL_ES2 = QMAKE_LIBS_OPENGL_ES2 = "-lGLESv2" QMAKE_CFLAGS_OPENGL_ES2 = QMAKE_CFLAGS_FONTCONFIG = -I/usr/include/freetype2 QMAKE_LIBS_FONTCONFIG = -lfontconfig -lfreetype QMAKE_INCDIR_LIBUDEV = QMAKE_LIBS_LIBUDEV = -ludev QMAKE_INCDIR_XKBCOMMON_EVDEV = QMAKE_LIBS_XKBCOMMON_EVDEV = -lxkbcommon QMAKE_LIBINPUT_VERSION_MAJOR = 1 QMAKE_LIBINPUT_VERSION_MINOR = 5 QMAKE_INCDIR_LIBINPUT = QMAKE_LIBS_LIBINPUT = -linput QMAKE_LIBXI_VERSION_MAJOR = 1 QMAKE_LIBXI_VERSION_MINOR = 7 QMAKE_LIBXI_VERSION_PATCH = 4 QMAKE_X11_PREFIX = /usr QMAKE_CFLAGS_XKBCOMMON = QMAKE_LIBS_XKBCOMMON = -lxkbcommon-x11 -lxkbcommon QMAKE_INCDIR_EGL = /usr/include/libdrm QMAKE_LIBS_EGL = -lEGL QMAKE_CFLAGS_EGL = QMAKE_CFLAGS_XCB = QMAKE_LIBS_XCB = -lxcb-sync -lxcb-xfixes -lxcb-render -lxcb-randr -lxcb-image -lxcb-shm -lxcb-keysyms -lxcb-icccm -lxcb-shape -lxcb sql-drivers = sql-plugins = mysql psql sqlite sqlite2 tds qmake switches .........

Build options:
Configuration .......... accessibility accessibility-atspi-bridge alsa audio-backend c++11 c++14 clock-gettime clock-monotonic compile_examples concurrent cross_compile cups dbus dbus-linked doubleconversion egl eglfs eglfs_brcm eglfs_gbm enable_new_dtags evdev eventfd fontconfig full-config gbm getaddrinfo getifaddrs glib gstreamer-0.10 harfbuzz iconv icu inotify ipv6ifname kms large-config largefile libinput libproxy libudev linuxfb medium-config minimal-config mremap mtdev neon opengl opengles2 openssl pcre png poll_poll posix_fallocate precompile_header pulseaudio qpa qpa reduce_exports release release_tools rpath shared small-config system-freetype system-jpeg system-png system-zlib threadsafe-cloexec tslib xcb xcb-glx xcb-plugin xcb-render xcb-sm xcb-xlib xinput2 xkbcommon-evdev xlib xrender
Build parts ............ libs
Mode ................... release; optimized tools
Using sanitizer(s)...... none
Using C++ standard ..... c++14
Using gold linker....... no
Using new DTAGS ........ yes
Using PCH .............. yes
Using LTCG ............. no
Target compiler supports:
Neon ................. yes

Qt modules and options:
Qt D-Bus ............... yes (linked to dbus-1)
Qt Concurrent .......... yes
Qt GUI ................. yes
Qt Widgets ............. yes
Large File ............. yes
QML debugging .......... yes
Use system proxies ..... no

Support enabled for:
Accessibility .......... yes
ALSA ................... yes
CUPS ................... yes
DoubleConversion........ yes (bundled copy)
Evdev .................. yes
FontConfig ............. yes
FreeType ............... yes (system library)
Glib ................... yes
GStreamer .............. yes (0.10)
GTK platformtheme ...... no
HarfBuzz ............... yes (bundled copy)
Iconv .................. yes
ICU .................... yes
Image formats:
GIF .................. yes (plugin, using bundled copy)
JPEG ................. yes (plugin, using system library)
PNG .................. yes (in QtGui, using system library)
libinput................ yes
Logging backends:
journald ............... no
syslog ............... no
mtdev .................. yes (system library)
Networking:
getaddrinfo .......... yes
getifaddrs ........... yes
IPv6 ifname .......... yes
libproxy.............. yes
OpenSSL .............. yes (loading libraries at run-time)
OpenGL / OpenVG:
EGL .................. yes
OpenGL ............... yes (OpenGL ES 2.0+)
OpenVG ............... no
PCRE ................... yes (bundled copy)
pkg-config ............. yes
PulseAudio ............. yes
QPA backends:
DirectFB ............. no
EGLFS ................ yes
EGLFS i.MX6 ........ no
EGLFS i.MX6 Wayland. no
EGLFS EGLDevice .... no
EGLFS GBM .......... yes
EGLFS Mali ......... no
EGLFS Raspberry Pi . yes
EGLFS X11 .......... no
LinuxFB .............. yes
Mir client............ no
XCB .................. yes (system library)
EGL on X ........... no
GLX ................ yes
MIT-SHM ............ yes
Xcb-Xlib ........... yes
Xcursor ............ yes (loaded at runtime)
Xfixes ............. yes (loaded at runtime)
Xi2 ................ yes
Xrandr ............. yes (loaded at runtime)
Xrender ............ yes
XKB ................ yes
XShape ............. yes
XSync .............. yes
Session management ..... yes
SQL drivers:
DB2 .................. no
InterBase ............ no
MySQL ................ yes (plugin)
OCI .................. no
ODBC ................. no
PostgreSQL ........... yes (plugin)
SQLite 2 ............. yes (plugin)
SQLite ............... yes (plugin, using bundled copy)
TDS .................. yes (plugin)
tslib .................. yes
udev ................... yes
xkbcommon-x11........... yes (system library)
xkbcommon-evdev......... yes
zlib ................... yes (system library)

NOTE: Qt is using double for qreal on this system. This is binary incompatible against Qt 5.1.
Configure with '-qreal float' to create a build that is binary compatible with 5.1.

NOTE: -optimized-tools is not useful in -release mode.

Info: creating stash file /home/pi/opt/qt-everywhere-opensource-src-5.7.1/.qmake.stash
Info: creating super cache file /home/pi/opt/qt-everywhere-opensource-src-5.7.1/.qmake.super

Qt is now configured for building. Just run 'make'.
Once everything is built, you must run 'make install'.
Qt will be installed into /usr/local/qt5

Prior to reconfiguration, make sure you remove any leftovers from
the previous build.

? This user is from outside of this forum

and the installation info error is :
make[5]: Leaving directory '/home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtwayland/src/plugins/platforms/qwayland-brcm-egl'
cd qwayland-xcomposite-egl/ && ( test -e Makefile || /home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtbase/bin/qmake /home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtwayland/src/plugins/platforms/qwayland-xcomposite-egl/qwayland-xcomposite-egl.pro -qtconf /home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtbase/bin/qt.conf -o Makefile ) && make -f Makefile install
make[5]: Entering directory '/home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtwayland/src/plugins/platforms/qwayland-xcomposite-egl'
/usr/bin/g++ -c -march=armv8-a -mtune=cortex-a53 -mfpu=crypto-neon-fp-armv8 -mfloat-abi=hard -O2 -std=c++1y -fvisibility=hidden -fvisibility-inlines-hidden -fno-exceptions -Wall -W -Wvla -D_REENTRANT -fPIC -DQT_NO_EXCEPTIONS -D_LARGEFILE64_SOURCE -D_LARGEFILE_SOURCE -DQT_NO_DEBUG -DQT_PLUGIN -DQT_PLATFORMSUPPORT_LIB -DQT_WAYLANDCLIENT_LIB -DQT_GUI_LIB -DQT_CORE_LIB -I. -I/opt/vc/include -I/opt/vc/include/interface/vcos -I/opt/vc/include/interface/vcos/pthreads -I/opt/vc/include/interface/vmcs_host/linux -I../../../hardwareintegration/client/xcomposite-egl -I../../../hardwareintegration/client/xcomposite_share -isystem /usr/include/libdrm -I../../../../include/QtWaylandClient/5.7.1 -I../../../../include/QtWaylandClient/5.7.1/QtWaylandClient -I/home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtbase/include -I/home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtbase/include/QtPlatformSupport -I/home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtbase/include/QtPlatformSupport/5.7.1 -I/home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtbase/include/QtPlatformSupport/5.7.1/QtPlatformSupport -I/home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtbase/include/QtGui/5.7.1 -I/home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtbase/include/QtGui/5.7.1/QtGui -I../../../../include -I../../../../include/QtWaylandClient -I/home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtbase/include/QtGui -I/home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtbase/include/QtCore/5.7.1 -I/home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtbase/include/QtCore/5.7.1/QtCore -I/home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtbase/include/QtCore -I.moc -I/home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtbase/mkspecs/devices/linux-rpi3-g++ -o .obj/qwaylandxcompositebuffer.o ../../../hardwareintegration/client/xcomposite_share/qwaylandxcompositebuffer.cpp
/usr/bin/g++ -c -march=armv8-a -mtune=cortex-a53 -mfpu=crypto-neon-fp-armv8 -mfloat-abi=hard -O2 -std=c++1y -fvisibility=hidden -fvisibility-inlines-hidden -fno-exceptions -Wall -W -Wvla -D_REENTRANT -fPIC -DQT_NO_EXCEPTIONS -D_LARGEFILE64_SOURCE -D_LARGEFILE_SOURCE -DQT_NO_DEBUG -DQT_PLUGIN -DQT_PLATFORMSUPPORT_LIB -DQT_WAYLANDCLIENT_LIB -DQT_GUI_LIB -DQT_CORE_LIB -I. -I/opt/vc/include -I/opt/vc/include/interface/vcos -I/opt/vc/include/interface/vcos/pthreads -I/opt/vc/include/interface/vmcs_host/linux -I../../../hardwareintegration/client/xcomposite-egl -I../../../hardwareintegration/client/xcomposite_share -isystem /usr/include/libdrm -I../../../../include/QtWaylandClient/5.7.1 -I../../../../include/QtWaylandClient/5.7.1/QtWaylandClient -I/home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtbase/include -I/home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtbase/include/QtPlatformSupport -I/home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtbase/include/QtPlatformSupport/5.7.1 -I/home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtbase/include/QtPlatformSupport/5.7.1/QtPlatformSupport -I/home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtbase/include/QtGui/5.7.1 -I/home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtbase/include/QtGui/5.7.1/QtGui -I../../../../include -I../../../../include/QtWaylandClient -I/home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtbase/include/QtGui -I/home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtbase/include/QtCore/5.7.1 -I/home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtbase/include/QtCore/5.7.1/QtCore -I/home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtbase/include/QtCore -I.moc -I/home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtbase/mkspecs/devices/linux-rpi3-g++ -o .obj/qwaylandxcompositeeglwindow.o ../../../hardwareintegration/client/xcomposite-egl/qwaylandxcompositeeglwindow.cpp
../../../hardwareintegration/client/xcomposite-egl/qwaylandxcompositeeglwindow.cpp: In member function ‘void QtWaylandClient::QWaylandXCompositeEGLWindow::createEglSurface()’:
../../../hardwareintegration/client/xcomposite-egl/qwaylandxcompositeeglwindow.cpp:126:93: error: invalid conversion from ‘Window {aka long unsigned int}’ to ‘EGLNativeWindowType {aka void*}’ [-fpermissive]
m_surface = eglCreateWindowSurface(m_glxIntegration->eglDisplay(), m_config, m_xWindow,0);
^
In file included from ../../../hardwareintegration/client/xcomposite-egl/qwaylandxcompositeeglclientbufferintegration.h:57:0,
from ../../../hardwareintegration/client/xcomposite-egl/qwaylandxcompositeeglwindow.h:46,
from ../../../hardwareintegration/client/xcomposite-egl/qwaylandxcompositeeglwindow.cpp:40:
/opt/vc/include/EGL/egl.h:265:31: note: initializing argument 3 of ‘void* eglCreateWindowSurface(EGLDisplay, EGLConfig, EGLNativeWindowType, const EGLint*)’
EGLAPI EGLSurface EGLAPIENTRY eglCreateWindowSurface(EGLDisplay dpy, EGLConfig config,
^
Makefile:2100: recipe for target '.obj/qwaylandxcompositeeglwindow.o' failed
make[5]: *** [.obj/qwaylandxcompositeeglwindow.o] Error 1
make[5]: Leaving directory '/home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtwayland/src/plugins/platforms/qwayland-xcomposite-egl'
Makefile:198: recipe for target 'sub-qwayland-xcomposite-egl-install_subtargets-ordered' failed
make[4]: *** [sub-qwayland-xcomposite-egl-install_subtargets-ordered] Error 2
make[4]: Leaving directory '/home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtwayland/src/plugins/platforms'
Makefile:57: recipe for target 'sub-platforms-install_subtargets' failed
make[3]: *** [sub-platforms-install_subtargets] Error 2
make[3]: Leaving directory '/home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtwayland/src/plugins'
Makefile:160: recipe for target 'sub-plugins-install_subtargets' failed
make[2]: *** [sub-plugins-install_subtargets] Error 2
make[2]: Leaving directory '/home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtwayland/src'
Makefile:56: recipe for target 'sub-src-install_subtargets' failed
make[1]: *** [sub-src-install_subtargets] Error 2
make[1]: Leaving directory '/home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtwayland'
Makefile:498: recipe for target 'module-qtwayland-install_subtargets' failed
make: *** [module-qtwayland-install_subtargets] Error 2

jsulm

All the errors you posted, except the last post, are not build errors - they just indicate that some features are disabled. For example SSE is disabled because ARM CPUs do not support it.
You probably can get rid of last error disabling QtWayland if you do not need it.

JiujiuTong

This post is deleted!

JiujiuTong

@jsulm
yes you are right!
to be honest i don't know much about Qtwayland, if disabled , is there any other side-effects as EGL-X11 is disabled ?
thank you every much!

jsulm

@JiujiuTong If you don't want to use Wayland then there are no side effects if you don't build it. You need support for what ever graphics you want to use. Do you want to use X11?

JiujiuTong

@jsulm
thanks for your rapid reply!
i try to install the QT5.7 on rpi3 because i want to learn developing qt application on rpi3 with OS(RASPBIAN JESSIE WITH PIXEL), the main purpose is playing multimedia.
as i'm a fresher to linux, i don't know much about X11, from the internet information, it seems there is no need to have this feature for my usage, am I right ?

jsulm

@JiujiuTong Per default Raspbian is using X11. So, if you want to test GUI applications you need X11. You most probably already have it as you're running Pixel. If Qt configure complains about OpenGL then you need to install OpenGL devel packages.

JiujiuTong

@jsulm
sorry, i don't understand.
do you mean i need to enable EGL-X11?
from the configure log it seems that "OpenGL ES 2.0 enabled".
what should i do then ?
thank you！

jsulm

@JiujiuTong then disable QtWayland and try again

JiujiuTong

@jsulm
OK, I will have a try! hope it works
thank you very much.
i will tell you the result later!

jsulm

@JiujiuTong add -skip wayland to your configure call

JiujiuTong

@jsulm
got it !

JiujiuTong

@jsulm
the problem is solved with -skip wayland option
but another problem happens:
the make install output error
/usr/bin/ld: cannot find -lclip2tri
/usr/bin/ld: cannot find -lpoly2tri
/usr/bin/ld: cannot find -lclipper
I know it means that three libs are not find, but there are tips above:
cd poly2tri/ && ( test -e Makefile || /home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtbase/bin/qmake /home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtlocation/src/3rdparty/poly2tri/poly2tri.pro -qtconf /home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtbase/bin/qt.conf -o Makefile ) && make -f Makefile install
make[4]: Entering directory '/home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtlocation/src/3rdparty/poly2tri'
make[4]: Nothing to be done for 'install'.
make[4]: Leaving directory '/home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtlocation/src/3rdparty/poly2tri'
cd clipper/ && ( test -e Makefile || /home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtbase/bin/qmake /home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtlocation/src/3rdparty/clipper/clipper.pro -qtconf /home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtbase/bin/qt.conf -o Makefile ) && make -f Makefile install
make[4]: Entering directory '/home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtlocation/src/3rdparty/clipper'
make[4]: Nothing to be done for 'install'.
make[4]: Leaving directory '/home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtlocation/src/3rdparty/clipper'
cd clip2tri/ && ( test -e Makefile || /home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtbase/bin/qmake /home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtlocation/src/3rdparty/clip2tri/clip2tri.pro -qtconf /home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtbase/bin/qt.conf -o Makefile ) && make -f Makefile install
make[4]: Entering directory '/home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtlocation/src/3rdparty/clip2tri'
make[4]: Nothing to be done for 'install'.
make[4]: Leaving directory '/home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtlocation/src/3rdparty/clip2tri'
make[3]: Leaving directory '/home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtlocation/src/3rdparty'

it seams that the install process skip producing the libs,but later it need the libs, can you give any suggestions? thank you !

jsulm

@JiujiuTong I don't know why those libs are not installed, but you can try to copy them manually

JiujiuTong

@jsulm
where can i find these libs? it seems that there are no libs created.....