Latest release of Qt does not work with XCode 8.2.1 on macOS Sierra
-
Hi,
To add to @mrjj, Apple broke several things with their latest Xcode update. Some of which have already been fixed but you should update Qt to a more recent version like 5.7.1 or even 5.8RC (5.8.0 should be released next week if everything goes to plan)
Qt 5.7.0 (Clang 7.0 (Apple), 64 bit) with Creator 4.0.3.
I'm going to try version 8.0 of Xcode with the version of Qt/Creator listed above. If that doesn't go anywhere. 8.1, then 8.2. then Try updating to a newer Qt/Creator version.
Thx for the replies..
-
Qt 5.7.0 (Clang 7.0 (Apple), 64 bit) with Creator 4.0.3.
I'm going to try version 8.0 of Xcode with the version of Qt/Creator listed above. If that doesn't go anywhere. 8.1, then 8.2. then Try updating to a newer Qt/Creator version.
Thx for the replies..
-
It's pointless to try with the 8.0 version of Xcode, that's the version that introduced these breakage. Just use the latest and a more recent version of Qt.
-
Update qt and Xcode to latest versions. Everything works without any issue.
-
Update qt and Xcode to latest versions. Everything works without any issue.
-
Then go with 5.8RC
-
OK. Rolled back and started over.
Re-downloaded the Xcode and CLT installer from the Apple Dev site. Ran the CLT install. Ran the Xcode install. Ran the Sudo xcodebuild -install. Agreed to the license. Use the Qt MaintainanceTool to update. Ran it to get a new MT, then ran the MT again to get the updates. Ran Creator to check version/build. OK. 5.7.1. Run Creator. Open an existing project. Android and Desktop kit available. No iOS. Quit Creator. Run Xcode. Do nothing. Exit Xcode. Run Creator. Now iOS kit are available. ?? Build a desktop version.
--results--
Desktop build..General Messages after Build>qmake
Checking for license updates ...
/bin/sh: /Developer/Android-NDK/android-ndk-r10b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/bin/arm-linux-androideabi-g++: No such file or directory
Checking for updated license succeeded (3 licenses fetched)Desktop build worked.
Android build (debug) 1st pass..
The API level set for the APK is less than the minimum required by the kit.
The minimum API level required by the kit is 16.
Error while building/deploying project qSpine (kit: Android for armeabi-v7a (GCC 4.8, Qt 5.7.1))
When executing step "Build Android APK"Changed the API levels in the manifest from min API 9 to API 16 and target API 14 to API 16
QtMobile-5.7/5.7/android_armv7/mkspecs/android-g++ -o main.o ../main.cpp
arm-linux-androideabi-g++: error: unrecognized command line option '-fstack-protector-strong'
make: *** [main.o] Error 1The '-fstack-protector-strong' option flag is in the makefile..
CFLAGS = -fstack-protector-strong -DANDROID -march=armv7-a -mfloat-abi=softfp -mfpu=vfp -fno-builtin-memmove --sysroot=/Developer/Android-NDK/android-ndk-r10b/platforms/android-16/arch-arm/ -g -marm -O0 -Wall -W -D_REENTRANT -fPIC $(DEFINES)
CXXFLAGS = -fstack-protector-strong -DANDROID -march=armv7-a -mfloat-abi=softfp -mfpu=vfp -fno-builtin-memmove --sysroot=/Developer/Android-NDK/android-ndk-r10b/But I don’t know why it’s failing. What is “-fstack-protector-strong”? Why is it needed and can it be disabled. Or commented out?
Looking…
-
OK. Rolled back and started over.
Re-downloaded the Xcode and CLT installer from the Apple Dev site. Ran the CLT install. Ran the Xcode install. Ran the Sudo xcodebuild -install. Agreed to the license. Use the Qt MaintainanceTool to update. Ran it to get a new MT, then ran the MT again to get the updates. Ran Creator to check version/build. OK. 5.7.1. Run Creator. Open an existing project. Android and Desktop kit available. No iOS. Quit Creator. Run Xcode. Do nothing. Exit Xcode. Run Creator. Now iOS kit are available. ?? Build a desktop version.
--results--
Desktop build..General Messages after Build>qmake
Checking for license updates ...
/bin/sh: /Developer/Android-NDK/android-ndk-r10b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/bin/arm-linux-androideabi-g++: No such file or directory
Checking for updated license succeeded (3 licenses fetched)Desktop build worked.
Android build (debug) 1st pass..
The API level set for the APK is less than the minimum required by the kit.
The minimum API level required by the kit is 16.
Error while building/deploying project qSpine (kit: Android for armeabi-v7a (GCC 4.8, Qt 5.7.1))
When executing step "Build Android APK"Changed the API levels in the manifest from min API 9 to API 16 and target API 14 to API 16
QtMobile-5.7/5.7/android_armv7/mkspecs/android-g++ -o main.o ../main.cpp
arm-linux-androideabi-g++: error: unrecognized command line option '-fstack-protector-strong'
make: *** [main.o] Error 1The '-fstack-protector-strong' option flag is in the makefile..
CFLAGS = -fstack-protector-strong -DANDROID -march=armv7-a -mfloat-abi=softfp -mfpu=vfp -fno-builtin-memmove --sysroot=/Developer/Android-NDK/android-ndk-r10b/platforms/android-16/arch-arm/ -g -marm -O0 -Wall -W -D_REENTRANT -fPIC $(DEFINES)
CXXFLAGS = -fstack-protector-strong -DANDROID -march=armv7-a -mfloat-abi=softfp -mfpu=vfp -fno-builtin-memmove --sysroot=/Developer/Android-NDK/android-ndk-r10b/But I don’t know why it’s failing. What is “-fstack-protector-strong”? Why is it needed and can it be disabled. Or commented out?
Looking…
@PSI_lbc From the error message:
"The API level set for the APK is less than the minimum required by the kit.
The minimum API level required by the kit is 16."
You should set higher API level version. Your Qt Kit requires at least 16.
After this change run qmake and do a complete rebuild. -
@PSI_lbc From the error message:
"The API level set for the APK is less than the minimum required by the kit.
The minimum API level required by the kit is 16."
You should set higher API level version. Your Qt Kit requires at least 16.
After this change run qmake and do a complete rebuild. -
In file -> ../android_armv7/mkspecs/commonandroid-base-tail.conf
commented out -fstack-protector-strong from next line LBC re: arm-linux-androideabi-g++: error: unrecognized command line option '-fstack-protector-strong'
#QMAKE_CFLAGS += -fstack-protector-strong -DANDROID
QMAKE_CFLAGS += -DANDROID -
Next problem...
21:48:22: Starting: "/Developer/SDKs/QtMobile-5.7/5.7/android_armv7/bin/androiddeployqt" --input /Users/PSI/Projects/Qt-Mobile/OT2Go/qSpine/build-Android_for_armeabi_v7a_GCC_4_8_Qt_5_7_1-Debug/android-libqSpine.so-deployment-settings.json --output /Users/PSI/Projects/Qt-Mobile/OT2Go/qSpine/build-Android_for_armeabi_v7a_GCC_4_8_Qt_5_7_1-Debug/android-build --deployment bundled --android-platform android-21 --jdk /System/Library/Frameworks/JavaVM.framework/Versions/CurrentJDK/Home --ant /usr/bin/ant
Warning: QML import could not be resolved in any of the import paths: Qt.test.qtestroot
Warning: QML import could not be resolved in any of the import paths: QtQuick.Extras.Private.CppUtils
Warning: QML import could not be resolved in any of the import paths: QtQuick.Extras.Private.CppUtils
sh: /usr/bin/ant: No such file or directory
Building the android package failed!
-- For more information, run this command with --verbose.
Generating Android Package
Input file: /Users/PSI/Projects/Qt-Mobile/OT2Go/qSpine/build-Android_for_armeabi_v7a_GCC_4_8_Qt_5_7_1-Debug/android-libqSpine.so-deployment-settings.json
Output directory: /Users/PSI/Projects/Qt-Mobile/OT2Go/qSpine/build-Android_for_armeabi_v7a_GCC_4_8_Qt_5_7_1-Debug/android-build/
Application binary: /Users/PSI/Projects/Qt-Mobile/OT2Go/qSpine/build-Android_for_armeabi_v7a_GCC_4_8_Qt_5_7_1-Debug/libqSpine.so
Android build platform: android-21
Install to device: No
21:48:29: The process "/Developer/SDKs/QtMobile-5.7/5.7/android_armv7/bin/androiddeployqt" exited with code 14.
Error while building/deploying project qSpine (kit: Android for armeabi-v7a (GCC 4.8, Qt 5.7.1))
When executing step "Build Android APK"
21:48:29: Elapsed time: 00:54. -
Next problem...
21:48:22: Starting: "/Developer/SDKs/QtMobile-5.7/5.7/android_armv7/bin/androiddeployqt" --input /Users/PSI/Projects/Qt-Mobile/OT2Go/qSpine/build-Android_for_armeabi_v7a_GCC_4_8_Qt_5_7_1-Debug/android-libqSpine.so-deployment-settings.json --output /Users/PSI/Projects/Qt-Mobile/OT2Go/qSpine/build-Android_for_armeabi_v7a_GCC_4_8_Qt_5_7_1-Debug/android-build --deployment bundled --android-platform android-21 --jdk /System/Library/Frameworks/JavaVM.framework/Versions/CurrentJDK/Home --ant /usr/bin/ant
Warning: QML import could not be resolved in any of the import paths: Qt.test.qtestroot
Warning: QML import could not be resolved in any of the import paths: QtQuick.Extras.Private.CppUtils
Warning: QML import could not be resolved in any of the import paths: QtQuick.Extras.Private.CppUtils
sh: /usr/bin/ant: No such file or directory
Building the android package failed!
-- For more information, run this command with --verbose.
Generating Android Package
Input file: /Users/PSI/Projects/Qt-Mobile/OT2Go/qSpine/build-Android_for_armeabi_v7a_GCC_4_8_Qt_5_7_1-Debug/android-libqSpine.so-deployment-settings.json
Output directory: /Users/PSI/Projects/Qt-Mobile/OT2Go/qSpine/build-Android_for_armeabi_v7a_GCC_4_8_Qt_5_7_1-Debug/android-build/
Application binary: /Users/PSI/Projects/Qt-Mobile/OT2Go/qSpine/build-Android_for_armeabi_v7a_GCC_4_8_Qt_5_7_1-Debug/libqSpine.so
Android build platform: android-21
Install to device: No
21:48:29: The process "/Developer/SDKs/QtMobile-5.7/5.7/android_armv7/bin/androiddeployqt" exited with code 14.
Error while building/deploying project qSpine (kit: Android for armeabi-v7a (GCC 4.8, Qt 5.7.1))
When executing step "Build Android APK"
21:48:29: Elapsed time: 00:54. -
Or use Gradle, in any case updating the NDK to r10e would be a good idea.
-
In Creator > Preferences..
JDK Location:
/System/Library/Frameworks/JavaVM.framework/Versions/CurrentJDK/HomeNot a JDK location.
I guess The OS upgrade to Sierra did not include a Java update.. Does Qt require the newest Java version as well?
Just noticed the "Download" icons to the right of the "Devices" screen.. DOH!
-
NDK, there are more recent version that r10e but there's a bug in the gcc from latest 13 series. See here for more details.
For the SDK, use the latest.
OK. I'm a dummy. Where is the latest Android SDK? The Qt link takes you to a page that offers the Android Studio..which I downloaded..but cannot find the SDK.
Is it hidden in the Android Studio app bundle?
Current error preventing moving forward..
Qt Creator needs a compiler set up to build. Configure a compiler in the kit options.Suggestions?
-
Get just the command line toolsunder the Download part of the Android Studio page.The compiler is provided by the ndk so if you pointed it properly it should detect it.
