Problem of Qt 5.6.0 Cross Compile for Olimex A20 Micro With Debian Jessie?

Mandar Khire

hi,
I am trying to Qt 5.6.0 cross compile for Olimex A20 Micro.
I take Qt 5.6.0 source in Ubuntu 14.04.
In Olimex I used Debian Jessie pre-compiled image.

Background:-
I follow instruction link(https://www.olimex.com/forum/index.php?topic=3825.0) for "Cross compile Qt5"
I modified some steps:-
First I start with taget that is Olimex A20 Micro.

first I check Olimex A20 Micro with Debian OS which ported on SD card by 'A20_OLinuxino_Micro_debian_Jessie_34_103_2G_release_11.img'. It works fine.
Then lots of packages are not installed & as per instructions it should be present so I follows:-
apt-get update
apt-get upgrade
apt-get -V install libfontconfig1-dev libdbus-1-dev libfreetype6-dev libudev-dev libasound2-dev libavcodec-dev libavformat-dev libswscale-dev libgstreamer0.10-dev libgstreamer-plugins-base0.10-dev gstreamer-tools gstreamer0.10-plugins-good gstreamer0.10-plugins-bad libicu-dev libsqlite3-dev libxslt1-dev libssl-dev git
apt-get autoremove
apt-get update
apt-get upgrade
After all package install I download Mali graphics chipset driver to use with QT eglfs by following commands:-
cd / opt
git clone https://github.com/linux-sunxi/sunxi-mali.git
cd sunxi-mali
git submodule init
git submodule update
make config ABI=armhf VERSION=r3p0 EGL_TYPE=framebuffer
make install
When make install command works fine then I Load the modules
modprobe mali
modprobe drm
modprobe mali_drm
After loading modules for testing the loaded drivers following steps done:-
cd /opt/sunxi-mali/test
make
./test
I can see a triangle on LCD display.

I cross verify ldd version by
ldd --version
ldd (Debian GLIBC 2.22-7) 2.22
Copyright (C) 2015 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
Written by Roland McGrath and Ulrich Drepper.

Observation:-
After following instructions for cross compilation of Qt5 for Olimex A20 Micro,
in Kernel expansion I found that Debian is upgraded whole distro to sid. Following line I seen:-
Debian GNU/Linux stretch/sid

After all these I shift to host PC for preparation.
I found that lots of packeges needed on host pc. So I follow some steps as below:-

apt-get -V install g++ make git build-essential fakeroot debhelper devscripts pkg-config libasound2-dev ccache qt5-default qtbase5-dev qtscript5-dev qtmultimedia5-dev libqt5multimedia5-plugins qttools5-dev-tools libusb-dev libftdi-dev libudev-dev libmad0-dev libsndfile1-dev libfftw3-dev libxcb-xinerama0-dev apt-show-versions libperl-dev libgtk2.0-dev tslib perl python "^libxcb.*" libx11-xcb-dev libglu1-mesa-dev libxrender-dev libxi-dev flex bison gperf libicu-dev libxslt-dev ruby libssl-dev libxcursor-dev libxcomposite-dev libxdamage-dev libxrandr-dev libfontconfig1-dev libcap-dev libbz2-dev libgcrypt11-dev libpci-dev libnss3-dev libdrm-dev libxtst-dev libcups2-dev libpulse-dev libxss-dev libatkmm-1.6-dev libgstreamer0.10-dev libgstreamer-plugins-base0.10-dev libxslt1-dev

apt-cache policy libglib2.0-0
apt-show-versions libglib2.0-0
apt-get build-dep -aarmhf qt
apt-get build-dep -aarmhf qt5
apt-get build-dep -arm-linux-gnueabihf qt5
apt-get build-dep -arm-linux-gnueabihf qt5
apt-get build-dep qt5

sudo ln -s /home/mkhire/ccache /usr/local/bin/gcc
sudo ln -s /home/mkhire/ccache /usr/local/bin/g++
sudo ln -s /home/mkhire/ccache /usr/local/bin/cc
sudo ln -s /home/mkhire/ccache /usr/local/bin/c++

after this I Download Cross-Compile Tools and install:
git clone git://gitorious.org/cross-compile-tools/cross-compile-tools.git
cd cross-compile-tools
./fixQualifiedLibraryPaths /mnt/a20/ /usr/bin/arm-linux-gnueabihf-g++

Then I Download qt-everywhere-opensource-src-5.6.0 from qt website and copy into my working directory i.e. /usr/local/
tar xvf qt-everywhere-opensource-src-5.6.0.gz

Then I created a device file for the Olimex A20:
cd /usr/local/qt-everywhere-opensource-src-5.6.0/qtbase/mkspecs/devices
cp -r linux-g++BeagleBoard linux-a20olimex-g++
cd linux-a20olimex-g++

Then For Remove qmake.conf
rm -f qmake.conf

Then I Download qeglfshooks_stub.cpp and qmake.conf
qmake.conf :
wget https://drive.google.com/file/d/0B-9HldMPXk75YjRfX2dWTGthUWs/view?usp=sharing
qeglfshooks_stub.cpp :
wget https://drive.google.com/file/d/0B-9HldMPXk75Wi1ERGRCbllmSkE/view?usp=sharing

Then I edit qmake.conf with following
QMAKE_INCDIR += /usr/local/tslib/include /usr/arm-linux-gnueabihf/include/c++/4.8.4 /usr/arm-linux-gnueabihf/include/c+/4.8.2/arm-linux-gnueabihf
QMAKE_INCDIR_EGL = /mnt/a20/usr/include/EGL
QMAKE_INCDIR_OPENGL_ES2 = /mnt/a20/usr/include/GLES2

I also edit qeglfshooks_stub.cpp for following
static struct mali_native_window native_window = {
.width = (short unsigned int)size.width(),
.height = (short unsigned int)size.height(),
};

Just change to:

static struct mali_native_window native_window = {
        (short unsigned int)size.width(),
        (short unsigned int)size.height(),
	};

Then I copy qmake.conf and qeglfshooks_stub.cpp
cp -f qmake.conf qt-everywhere-opensource-src-5.6.0/qtbase/mkspecs/devices/linux-a20olimex-g++/
cp -f qeglfshooks_stub.cpp qt-everywhere-opensource-src-5.6.0/qtbase/src/plugins/platforms/eglfs/

After I put paths for dbus and glib:
#cd /usr/local/qt-everywhere-opensource-src-5.6.0/qtbase/

Edit the file configure to add following lines 

# flags for libdbus-1
QT_CFLAGS_DBUS= "-I /mnt/a20/usr/include/dbus-1.0/ -I/mnt/a20/usr/lib/arm-linux-gnueabihf/dbus-1.0/include/"
QT_LIBS_DBUS=-ldbus-1 

# flags for Glib (X11 only)
QT_CFLAGS_GLIB="-I /mnt/a20/usr/include/glib-2.0/ -I /mnt/a20/usr/lib/arm-linux-gnueabihf/glib-2.0/include/"
QT_LIBS_GLIB=-lglib 2.0

After following above all instructions, setup is ready Olimex A20 as Target & Host PC Ubuntu 14.04.
Then
cd /usr/local/QT/qt-everywhere-opensource-src-5.6.0/qtbase

./configure -opengl es2 -device linux-a20olimex-g++ -device-option CROSS_COMPILE=/usr/bin/arm-linux-gnueabihf- -sysroot /mnt/a20 -opensource -confirm-license -optimized-qmake -release -make libs -prefix /usr/local/qt5a20 -no-pch -nomake tests -no-xcb -eglfs -v -tslib -dbus -icu -pulseaudio -glib -no-cups -qt-harfbuzz -gtkstyle

Here I face problem.

Problem:-
there are 18 things disabled found:-
01.Symbolic function binding
02. C++14
03. sse2
04. mtdev
05. libjpeg
06. DB2
07. InterBase
08. MySQL (thread-safe)
09. MySQL (thread-unsafe)
10. OCI
11. ODBC
12. iODBC
13. PostgreSQL
14. SQLite2
15. TDS
16. D-Bus
17. libproxy
18. ICU

Errors related to all these as follows:-

/usr/bin/arm-linux-gnueabihf-g++ --sysroot=/mnt/a20 -o libtest.so -shared -Wl,-Bsymbolic-functions -fPIC bsymbolic_functions.c
bsymbolic_functions.c:2:2: error: #error "Symbolic function binding on this architecture may be broken, disabling it (see QTBUG-36129)."
#error "Symbolic function binding on this architecture may be broken, disabling it (see QTBUG-36129)."
^
Symbolic function binding disabled.
C++14 auto-detection... ()
/usr/bin/arm-linux-gnueabihf-g++ -c -pipe -march=armv7-a -mtune=cortex-a7 -mfpu=neon -DLINUX=1 -DEGL_API_FB=1 -mfloat-abi=hard --sysroot=/mnt/a20 -O2 -O3 -std=gnu++1y -Wall -W -fPIC -I. -I/usr/local/tslib/include -I/usr/arm-linux-gnueabihf/include/c++/4.8.4 -I/usr/arm-linux-gnueabihf/include/c++/4.8.4/arm-linux-gnueabihf -I../../../mkspecs/devices/linux-a20olimex-g++ -o c++14.o c++14.cpp
c++14.cpp:37:4: error: #error "__cplusplus must be > 201103L (the value of C++11)"

 #  error "__cplusplus must be > 201103L (the value of C++11)"
    ^

make: *** [c++14.o] Error 1
C++14 disabled.

3./usr/bin/arm-linux-gnueabihf-g++ -c -pipe -march=armv7-a -mtune=cortex-a7 -mfpu=neon -DLINUX=1 -DEGL_API_FB=1 -mfloat-abi=hard --sysroot=/mnt/a20 -msse2 -g -Wall -W -fPIC -I. -I/usr/local/tslib/include -I/usr/arm-linux-gnueabihf/include/c++/4.8.4 -I/usr/arm-linux-gnueabihf/include/c++/4.8.4/arm-linux-gnueabihf -I../../../mkspecs/devices/linux-a20olimex-g++ -o sse2.o sse2.cpp
arm-linux-gnueabihf-g++: error: unrecognized command line option ‘-msse2’
make: *** [sse2.o] Error 1
sse2 disabled.

4.mtdev auto-detection... ()
Project ERROR: mtdev development package not found
mtdev disabled.

5.libjpeg auto-detection... ()
/usr/bin/arm-linux-gnueabihf-g++ -c -pipe -march=armv7-a -mtune=cortex-a7 -mfpu=neon -DLINUX=1 -DEGL_API_FB=1 -mfloat-abi=hard --sysroot=/mnt/a20 -O2 -O3 -Wall -W -fPIC -I. -I/usr/local/tslib/include -I/usr/arm-linux-gnueabihf/include/c++/4.8.4 -I/usr/arm-linux-gnueabihf/include/c++/4.8.4/arm-linux-gnueabihf -I../../../mkspecs/devices/linux-a20olimex-g++ -o libjpeg.o libjpeg.cpp
libjpeg.cpp:37:21: fatal error: jpeglib.h: No such file or directory
#include <jpeglib.h>
^
compilation terminated.
make: *** [libjpeg.o] Error 1
libjpeg disabled.

DB2 auto-detection... ()
/usr/bin/arm-linux-gnueabihf-g++ -c -pipe -march=armv7-a -mtune=cortex-a7 -mfpu=neon -DLINUX=1 -DEGL_API_FB=1 -mfloat-abi=hard --sysroot=/mnt/a20 -O2 -O3 -Wall -W -fPIC -I. -I/usr/local/tslib/include -I/usr/arm-linux-gnueabihf/include/c++/4.8.4 -I/usr/arm-linux-gnueabihf/include/c++/4.8.4/arm-linux-gnueabihf -I../../../mkspecs/devices/linux-a20olimex-g++ -o db2.o db2.cpp
db2.cpp:34:20: fatal error: sqlcli.h: No such file or directory
#include <sqlcli.h>
^
compilation terminated.
make: *** [db2.o] Error 1
DB2 disabled.

7.InterBase auto-detection... ()
/usr/bin/arm-linux-gnueabihf-g++ -c -pipe -march=armv7-a -mtune=cortex-a7 -mfpu=neon -DLINUX=1 -DEGL_API_FB=1 -mfloat-abi=hard --sysroot=/mnt/a20 -O2 -O3 -Wall -W -fPIC -I. -I/usr/local/tslib/include -I/usr/arm-linux-gnueabihf/include/c++/4.8.4 -I/usr/arm-linux-gnueabihf/include/c++/4.8.4/arm-linux-gnueabihf -I../../../mkspecs/devices/linux-a20olimex-g++ -o ibase.o ibase.cpp
ibase.cpp:34:19: fatal error: ibase.h: No such file or directory
#include <ibase.h>
^
compilation terminated.
make: *** [ibase.o] Error 1
InterBase disabled.

8.MySQL (thread-safe) auto-detection... ()
/usr/bin/arm-linux-gnueabihf-g++ -c -pipe -march=armv7-a -mtune=cortex-a7 -mfpu=neon -DLINUX=1 -DEGL_API_FB=1 -mfloat-abi=hard --sysroot=/mnt/a20 -O2 -O3 -Wall -W -fPIC -I. -I/usr/local/tslib/include -I/usr/arm-linux-gnueabihf/include/c++/4.8.4 -I/usr/arm-linux-gnueabihf/include/c++/4.8.4/arm-linux-gnueabihf -I../../../mkspecs/devices/linux-a20olimex-g++ -o mysql.o ../mysql/mysql.cpp
../mysql/mysql.cpp:34:19: fatal error: mysql.h: No such file or directory
#include "mysql.h"
^
compilation terminated.
make: *** [mysql.o] Error 1
MySQL (thread-safe) disabled.

9.MySQL (thread-unsafe) auto-detection... ()
/usr/bin/arm-linux-gnueabihf-g++ -c -pipe -march=armv7-a -mtune=cortex-a7 -mfpu=neon -DLINUX=1 -DEGL_API_FB=1 -mfloat-abi=hard --sysroot=/mnt/a20 -O2 -O3 -Wall -W -fPIC -I. -I/usr/local/tslib/include -I/usr/arm-linux-gnueabihf/include/c++/4.8.4 -I/usr/arm-linux-gnueabihf/include/c++/4.8.4/arm-linux-gnueabihf -I../../../mkspecs/devices/linux-a20olimex-g++ -o mysql.o mysql.cpp
mysql.cpp:34:19: fatal error: mysql.h: No such file or directory
#include "mysql.h"
^
compilation terminated.
make: *** [mysql.o] Error 1
MySQL (thread-unsafe) disabled.

10.OCI auto-detection... ()
/usr/bin/arm-linux-gnueabihf-g++ -c -pipe -march=armv7-a -mtune=cortex-a7 -mfpu=neon -DLINUX=1 -DEGL_API_FB=1 -mfloat-abi=hard --sysroot=/mnt/a20 -O2 -O3 -Wall -W -fPIC -I. -I/usr/local/tslib/include -I/usr/arm-linux-gnueabihf/include/c++/4.8.4 -I/usr/arm-linux-gnueabihf/include/c++/4.8.4/arm-linux-gnueabihf -I../../../mkspecs/devices/linux-a20olimex-g++ -o oci.o oci.cpp
oci.cpp:34:17: fatal error: oci.h: No such file or directory
#include <oci.h>
^
compilation terminated.
make: *** [oci.o] Error 1
OCI disabled.

11.ODBC auto-detection... ()
/usr/bin/arm-linux-gnueabihf-g++ -c -pipe -march=armv7-a -mtune=cortex-a7 -mfpu=neon -DLINUX=1 -DEGL_API_FB=1 -mfloat-abi=hard --sysroot=/mnt/a20 -O2 -O3 -Wall -W -fPIC -I. -I/usr/local/tslib/include -I/usr/arm-linux-gnueabihf/include/c++/4.8.4 -I/usr/arm-linux-gnueabihf/include/c++/4.8.4/arm-linux-gnueabihf -I../../../mkspecs/devices/linux-a20olimex-g++ -o odbc.o odbc.cpp
odbc.cpp:37:17: fatal error: sql.h: No such file or directory
#include <sql.h>
^
compilation terminated.
make: *** [odbc.o] Error 1
ODBC disabled.

iODBC auto-detection... ()
/usr/bin/arm-linux-gnueabihf-g++ -c -pipe -march=armv7-a -mtune=cortex-a7 -mfpu=neon -DLINUX=1 -DEGL_API_FB=1 -mfloat-abi=hard --sysroot=/mnt/a20 -O2 -O3 -Wall -W -fPIC -I. -I/usr/local/tslib/include -I/usr/arm-linux-gnueabihf/include/c++/4.8.4 -I/usr/arm-linux-gnueabihf/include/c++/4.8.4/arm-linux-gnueabihf -I../../../mkspecs/devices/linux-a20olimex-g++ -o iodbc.o iodbc.cpp
iodbc.cpp:34:17: fatal error: sql.h: No such file or directory
#include <sql.h>
^
compilation terminated.
make: *** [iodbc.o] Error 1
iODBC disabled.
PostgreSQL auto-detection... ()
/usr/bin/arm-linux-gnueabihf-g++ -c -pipe -march=armv7-a -mtune=cortex-a7 -mfpu=neon -DLINUX=1 -DEGL_API_FB=1 -mfloat-abi=hard --sysroot=/mnt/a20 -O2 -O3 -Wall -W -fPIC -I. -I/usr/local/tslib/include -I/usr/arm-linux-gnueabihf/include/c++/4.8.4 -I/usr/arm-linux-gnueabihf/include/c++/4.8.4/arm-linux-gnueabihf -I../../../mkspecs/devices/linux-a20olimex-g++ -o psql.o psql.cpp
psql.cpp:34:22: fatal error: libpq-fe.h: No such file or directory
#include "libpq-fe.h"
^
compilation terminated.
make: *** [psql.o] Error 1
PostgreSQL disabled.

14.SQLite2 auto-detection... ()
/usr/bin/arm-linux-gnueabihf-g++ -c -pipe -march=armv7-a -mtune=cortex-a7 -mfpu=neon -DLINUX=1 -DEGL_API_FB=1 -mfloat-abi=hard --sysroot=/mnt/a20 -O2 -O3 -Wall -W -fPIC -I. -I/usr/local/tslib/include -I/usr/arm-linux-gnueabihf/include/c++/4.8.4 -I/usr/arm-linux-gnueabihf/include/c++/4.8.4/arm-linux-gnueabihf -I../../../mkspecs/devices/linux-a20olimex-g++ -o sqlite2.o sqlite2.cpp
sqlite2.cpp:34:20: fatal error: sqlite.h: No such file or directory
#include <sqlite.h>
^
compilation terminated.
make: *** [sqlite2.o] Error 1
SQLite2 disabled.

TDS auto-detection... ()
/usr/bin/arm-linux-gnueabihf-g++ -c -pipe -march=armv7-a -mtune=cortex-a7 -mfpu=neon -DLINUX=1 -DEGL_API_FB=1 -mfloat-abi=hard --sysroot=/mnt/a20 -O2 -O3 -Wall -W -fPIC -I. -I/usr/local/tslib/include -I/usr/arm-linux-gnueabihf/include/c++/4.8.4 -I/usr/arm-linux-gnueabihf/include/c++/4.8.4/arm-linux-gnueabihf -I../../../mkspecs/devices/linux-a20olimex-g++ -o tds.o tds.cpp
tds.cpp:34:22: fatal error: sybfront.h: No such file or directory
#include <sybfront.h>
^
compilation terminated.
make: *** [tds.o] Error 1
TDS disabled.
D-Bus auto-detection... ()
/usr/bin/arm-linux-gnueabihf-g++ -c -pipe -march=armv7-a -mtune=cortex-a7 -mfpu=neon -DLINUX=1 -DEGL_API_FB=1 -mfloat-abi=hard --sysroot=/mnt/a20 -O2 -O3 -Wall -W -fPIC -I. -I/mnt/a20/usr/include/dbus-1.0 -I/mnt/a20/usr/lib/arm-linux-gnueabihf/dbus-1.0/include -I/usr/local/tslib/include -I/usr/arm-linux-gnueabihf/include/c++/4.8.4 -I/usr/arm-linux-gnueabihf/include/c++/4.8.4/arm-linux-gnueabihf -I../../../mkspecs/devices/linux-a20olimex-g++ -o dbus.o dbus.cpp
/usr/bin/arm-linux-gnueabihf-g++ -Wl,-O1 -o dbus dbus.o -L/mnt/a20/usr/arm-linux-gnueabihf/lib -L/mnt/a20/arm-linux-gnueabihf/include -L/usr/arm-linux-gnueabihf/tslib/lib -L/usr/arm-linux-gnueabihf/tslib/include -lrt -lpthread -ldl -Wl,-rpath-link,/mnt/a20/usr/arm-linux-gnueabihf/lib -Wl,-rpath-link,/mnt/a20/arm-linux-gnueabihf/include --sysroot=/mnt/a20 -L/mnt/a20/usr/lib/arm-linux-gnueabihf -ldbus-1
/mnt/a20/usr/lib/arm-linux-gnueabihf/libdbus-1.a(libdbus_1_la-dbus-sysdeps-pthread.o): In function _dbus_platform_rmutex_new': (.text+0x40): undefined reference to pthread_mutexattr_init'
/mnt/a20/usr/lib/arm-linux-gnueabihf/libdbus-1.a(libdbus_1_la-dbus-sysdeps-pthread.o): In function _dbus_platform_rmutex_new': (.text+0x48): undefined reference to pthread_mutexattr_settype'
/mnt/a20/usr/lib/arm-linux-gnueabihf/libdbus-1.a(libdbus_1_la-dbus-sysdeps-pthread.o): In function _dbus_platform_rmutex_new': (.text+0x5a): undefined reference to pthread_mutexattr_destroy'
/mnt/a20/usr/lib/arm-linux-gnueabihf/libdbus-1.a(libdbus_1_la-dbus-sysdeps-pthread.o): In function _dbus_platform_condvar_new': (.text+0x10e): undefined reference to pthread_condattr_setclock'
/mnt/a20/usr/lib/arm-linux-gnueabihf/libdbus-1.a(libdbus_1_la-dbus-sysdeps-unix.o): In function _dbus_listen_systemd_sockets': (.text+0x12de): undefined reference to sd_listen_fds'
/mnt/a20/usr/lib/arm-linux-gnueabihf/libdbus-1.a(libdbus_1_la-dbus-sysdeps-unix.o): In function _dbus_listen_systemd_sockets': (.text+0x1300): undefined reference to sd_is_socket'
collect2: error: ld returned 1 exit status
make: *** [dbus] Error 1
D-Bus disabled.
libproxy auto-detection... ()
/usr/bin/arm-linux-gnueabihf-g++ -c -pipe -march=armv7-a -mtune=cortex-a7 -mfpu=neon -DLINUX=1 -DEGL_API_FB=1 -mfloat-abi=hard --sysroot=/mnt/a20 -O2 -O3 -Wall -W -fPIC -I. -I/usr/local/tslib/include -I/usr/arm-linux-gnueabihf/include/c++/4.8.4 -I/usr/arm-linux-gnueabihf/include/c++/4.8.4/arm-linux-gnueabihf -I../../../mkspecs/devices/linux-a20olimex-g++ -o libproxy.o libproxy.cpp
libproxy.cpp:36:19: fatal error: proxy.h: No such file or directory
#include <proxy.h>
^
compilation terminated.
make: *** [libproxy.o] Error 1
libproxy disabled.

18.ICU auto-detection... ()
/usr/bin/arm-linux-gnueabihf-g++ -c -pipe -march=armv7-a -mtune=cortex-a7 -mfpu=neon -DLINUX=1 -DEGL_API_FB=1 -mfloat-abi=hard --sysroot=/mnt/a20 -O2 -O3 -Wall -W -fPIC -I. -I/usr/local/tslib/include -I/usr/arm-linux-gnueabihf/include/c++/4.8.4 -I/usr/arm-linux-gnueabihf/include/c++/4.8.4/arm-linux-gnueabihf -I../../../mkspecs/devices/linux-a20olimex-g++ -o icu.o icu.cpp
/usr/bin/arm-linux-gnueabihf-g++ -Wl,-O1 -o icu icu.o -L/mnt/a20/usr/arm-linux-gnueabihf/lib -L/mnt/a20/arm-linux-gnueabihf/include -L/usr/arm-linux-gnueabihf/tslib/lib -L/usr/arm-linux-gnueabihf/tslib/include -lrt -lpthread -ldl -Wl,-rpath-link,/mnt/a20/usr/arm-linux-gnueabihf/lib -Wl,-rpath-link,/mnt/a20/arm-linux-gnueabihf/include --sysroot=/mnt/a20 -licui18n -licuuc -licudata
/mnt/a20/usr/lib/arm-linux-gnueabihf/libicui18n.so: undefined reference to `__cxa_throw_bad_array_new_length@CXXABI_1.3.8'
collect2: error: ld returned 1 exit status
make: *** [icu] Error 1
ICU disabled.

Questions:-
1. How can I solve these?
2. Wherer I make mistake?
3. Is there any guide for QT5.6.0 Cross compile for Olimex A20 Micro with Debian Jessie by Host PC with Ubuntu 14.04?
Need Help.
Thanks.

jsulm

Well, the errors you see just tell you that some things will not be available (for example ICU or libproxy). Whether this is an issue depends on your needs. If you do not need any of them then you can just continue with make.

If you need any of these you have ot install headers and libs.
C++14 is not available because your compiler does not support it.
SSE2 is not supported because your target CPU is not an Intel CPU.

Mandar Khire

Thanks jsulm,
I dont know whether how many out of 18 disabled things I do not need in future.
Means As I can see Mysql or SQLite2 in disabled list.
If I continue 'make' with errors which I seen when ./configure...command.
& In future if I want to create QT application which use those Mysql or SQLite2 etc things...then?

jsulm

Then you will need to rebuild at least parts of Qt later

Mandar Khire

Thanks jsulm,
I found

Turn on verbose messaging (-v) to ./configure to see the final report.
If you believe this message is in error you may use the continue
switch (-continue) to ./configure to continue.

So I use ' -v -continue' in ./configure command, Then run command:-

make -d -j4

I got error as follows:-

Live child 0x00ab0210 (.obj/qlatincodec.o) PID 14536 
Reaping losing child 0x00ab0210 PID 14536 
make[2]: *** [.obj/qlatincodec.o] Error 1
Removing child 0x00ab0210 PID 14536 from chain.
make[2]: Leaving directory `/usr/local/qt-everywhere-opensource-src-5.6.0/qtbase/src/tools/bootstrap'
Reaping losing child 0x01b77a70 PID 14531 
make[1]: *** [sub-bootstrap-make_first] Error 2
Removing child 0x01b77a70 PID 14531 from chain.
make[1]: Leaving directory `/usr/local/qt-everywhere-opensource-src-5.6.0/qtbase/src'
Reaping losing child 0x01b49420 PID 14521 
make: *** [sub-src-make_first] Error 2
Removing child 0x01b49420 PID 14521 from chain.

Any help?

jsulm

Are there any other messages before?

Mandar Khire

Yes there are lots (huge log due to '-d' option in 'make') of

Considering target file
Looking for an implicit rule for
Trying pattern rule with stem
Trying implicit prerequisite
Avoiding implicit rule recursion.
Looking for a rule with intermediate file
Avoiding implicit rule recursion.
No need to remake target

I found that one error which I miss to put in previous post:-
g++: error: unrecognized command line option ‘-std=c++14’

The log as below:-

make[2]: Entering directory `/usr/local/qt-everywhere-opensource-src-5.6.0/qtbase/src/tools/bootstrap'
g++ -c -pipe -ffunction-sections -O2 -fPIC -std=c++14 -fno-exceptions -Wall -W -D_REENTRANT -DQT_NO_MTDEV -DQT_NO_LIBUDEV -DQT_NO_LIBINPUT -DQT_BOOTSTRAPPED -DQT_LITE_UNICODE -DQT_NO_CAST_TO_ASCII -DQT_NO_CODECS -DQT_NO_DATASTREAM -DQT_NO_LIBRARY -DQT_NO_QOBJECT -DQT_NO_SYSTEMLOCALE -DQT_NO_THREAD -DQT_NO_UNICODETABLES -DQT_NO_USING_NAMESPACE -DQT_NO_DEPRECATED -DQT_NO_TRANSLATION -DQT_CRYPTOGRAPHICHASH_ONLY_SHA1 -DQT_NO_CAST_FROM_ASCII -DQT_BUILD_BOOTSTRAP_LIB -DQT_BUILDING_QT -DQT_ASCII_CAST_WARNINGS -DQT_MOC_COMPAT -DQT_USE_QSTRINGBUILDER -DQT_DEPRECATED_WARNINGS -DQT_DISABLE_DEPRECATED_BEFORE=0x050000 -DQT_NO_EXCEPTIONS -D_LARGEFILE64_SOURCE -D_LARGEFILE_SOURCE -DQT_NO_DEBUG -I. -I../../3rdparty/zlib -I../../../include -I../../../include/QtCore -I../../../include/QtCore/5.6.0 -I../../../include/QtCore/5.6.0/QtCore -I../../../include/QtXml -I../../../include/QtXml/5.6.0 -I../../../include/QtXml/5.6.0/QtXml -I../../../mkspecs/linux-g++ -o .obj/qlatincodec.o ../../corelib/codecs/qlatincodec.cpp
Putting child 0x00ab0210 (.obj/qlatincodec.o) PID 14536 on the chain.
      Commands of `.obj/qlatincodec.o' are being run.
      Considering target file `.obj/qtextcodec.o'.
       File `.obj/qtextcodec.o' does not exist.
        Considering target file `../../corelib/codecs/qtextcodec.cpp'.
         Looking for an implicit rule for `../../corelib/codecs/qtextcodec.cpp'.
         Trying pattern rule with stem `qtextcodec.cpp'.
         Trying implicit prerequisite `../../corelib/codecs/qtextcodec.cpp,v'.
         Trying pattern rule with stem `qtextcodec.cpp'.
         Trying implicit prerequisite `../../corelib/codecs/RCS/qtextcodec.cpp,v'.
         Trying pattern rule with stem `qtextcodec.cpp'.
         Trying implicit prerequisite `../../corelib/codecs/RCS/qtextcodec.cpp'.
         Trying pattern rule with stem `qtextcodec.cpp'.
         Trying implicit prerequisite `../../corelib/codecs/s.qtextcodec.cpp'.
         Trying pattern rule with stem `qtextcodec.cpp'.
         Trying implicit prerequisite `../../corelib/codecs/SCCS/s.qtextcodec.cpp'.
         No implicit rule found for `../../corelib/codecs/qtextcodec.cpp'.
         Finished prerequisites of target file `../../corelib/codecs/qtextcodec.cpp'.
        No need to remake target `../../corelib/codecs/qtextcodec.cpp'.
        Considering target file `../../../mkspecs/linux-g++/qplatformdefs.h'.
         Looking for an implicit rule for `../../../mkspecs/linux-g++/qplatformdefs.h'.
         Trying pattern rule with stem `qplatformdefs.h'.
         Trying implicit prerequisite `../../../mkspecs/linux-g++/qplatformdefs.h,v'.
         Trying pattern rule with stem `qplatformdefs.h'.
         Trying implicit prerequisite `../../../mkspecs/linux-g++/RCS/qplatformdefs.h,v'.
         Trying pattern rule with stem `qplatformdefs.h'.
         Trying implicit prerequisite `../../../mkspecs/linux-g++/RCS/qplatformdefs.h'.
         Trying pattern rule with stem `qplatformdefs.h'.
         Trying implicit prerequisite `../../../mkspecs/linux-g++/s.qplatformdefs.h'.
         Trying pattern rule with stem `qplatformdefs.h'.
         Trying implicit prerequisite `../../../mkspecs/linux-g++/SCCS/s.qplatformdefs.h'.
         No implicit rule found for `../../../mkspecs/linux-g++/qplatformdefs.h'.
         Finished prerequisites of target file `../../../mkspecs/linux-g++/qplatformdefs.h'.
        No need to remake target `../../../mkspecs/linux-g++/qplatformdefs.h'.
        Pruning file `../../../include/QtCore/qglobal.h'.
        Pruning file `../../corelib/global/qglobal.h'.
        Pruning file `../../../include/QtCore/qconfig.h'.
        Pruning file `../../corelib/global/qconfig.h'.
        Pruning file `../../../include/QtCore/qfeatures.h'.
        Pruning file `../../corelib/global/qfeatures.h'.
        Pruning file `../../../include/QtCore/qsystemdetection.h'.
        Pruning file `../../corelib/global/qsystemdetection.h'.
        Pruning file `../../../include/QtCore/qprocessordetection.h'.
        Pruning file `../../corelib/global/qprocessordetection.h'.
        Pruning file `../../../include/QtCore/qcompilerdetection.h'.
        Pruning file `../../corelib/global/qcompilerdetection.h'.
        Pruning file `../../../include/QtCore/qtypeinfo.h'.
        Pruning file `../../corelib/global/qtypeinfo.h'.
        Pruning file `../../../include/QtCore/qtypetraits.h'.
g++: error: unrecognized command line option ‘-std=c++14’

jsulm

For some reason -std=c++14 compiler option was passed to the compiler. Your GCC version does not support it. Actually in your previous post it was stated that C++14 was disabled. So, I'm wondering why this flag was passed to the compiler. You can check whether it is possible to specify which C++ standard should be used when you call configure (configure -h).

Mandar Khire

Thanks jsulm,
I found '-std=c++14' in following files

/qt-everywhere-opensource-src-5.6.0/qtbase/mkspecs/common/g++-base.conf has

QMAKE_CXXFLAGS_CXX11    = -std=c++14

qt-everywhere-opensource-src-5.6.0/qtbase/src/tools/bootstrap/Makefile has

CXXFLAGS      = -pipe -ffunction-sections -O2 -fPIC -std=c++14 -fno-exceptions -Wall -W -D_REENTRANT $(DEFINES)

Steps taken:-

After ./configure command I run make command & got error.
After it I run make clean.

Qustion:-

Is my ./configure command wrong?
My configure command as below:-

./configure -v -continue -opengl es2 -device linux-a20olimex-g++ -device-option CROSS_COMPILE=/usr/bin/arm-linux-gnueabihf- -sysroot /mnt/a20 -opensource -confirm-license -optimized-qmake -release -make libs -prefix /usr/local/qt5a20 -no-pch -nomake tests -no-xcb -eglfs -v -tslib -dbus -icu -pulseaudio -glib -no-cups -qt-harfbuzz -gtkstyle

Should I edit those two files where I found c++14?
What about other disable things? Previously I found 18 things as disable but after make clean & might due to -v option in ./configure command I found more things as disabled which as below:-
1 to 18 in first question I mentioned.
19. PulseAudio
20. OpenGL ES 3.0
21. OpenGL ES 3.1
22. libudev
23. xkbcommon
24. GBM
25. KMS
26. Mir client
27. EGL-X11
28. eglfs-brcm
29. eglfs-egldevice
30. eglfs-mali
31. eglfs-viv
32. OpenVG
33. OpenVG (lc includes)
34. alsa

Need Guidance!
Thanks,

jsulm

You can try to replace

QMAKE_CXXFLAGS_CXX11    = -std=c++14

with

QMAKE_CXXFLAGS_CXX11    = -std=c++11

in qt-everywhere-opensource-src-5.6.0/qtbase/mkspecs/common/g++-base.conf
And then run configure and make again.

Regarding other disabled things: it really depends on your needs. Do you need any of them? If not then just build. If you need any of them then you need to make sure you have header files and libraries needed to use them.

Mandar Khire

Thanks jsulm,
I change g++-base.conf as per instructions.
Then I run 'make' command.
There are errors while make command run.
In /mnt/a20/usr/lib/arm-linux-gnueabihf/

librt.so
libdl.so
libz.so
libdl.so
libglib-2.0.so
libm.so
I found in /mnt/a20 ie in Olimex A20 Debian OS has arm-linux-gnueabihf
when I use command 'ls -al', those including those 6 so files total 25 has something problem in softlink (it shown in Red color)
1. libanl.so -> /lib/arm-linux-gnueabihf/libanl.so.1
2. libBrokenLocale.so -> /lib/arm-linux-gnueabihf/libBrokenLocale.so.1
3. libcidn.so -> /lib/arm-linux-gnueabihf/libcidn.so.1
4. libcrypt.so -> /lib/arm-linux-gnueabihf/libcrypt.so.1
5. libcidn.so -> /lib/arm-linux-gnueabihf/libcidn.so.1
6. libdl.so -> /lib/arm-linux-gnueabihf/libdl.so.2
7. libexpat.so -> /lib/arm-linux-gnueabihf/libexpat.so.1.6.0
8. libglib-2.0.so -> /lib/arm-linux-gnueabihf/libglib-2.0.so.0
9. libm.so -> /lib/arm-linux-gnueabihf/libm.so.6
10. libnsl.so -> /lib/arm-linux-gnueabihf/libnsl.so.1
11. libnss_compat.so -> /lib/arm-linux-gnueabihf/libnss_compat.so.2
12. libnss_dns.so -> /lib/arm-linux-gnueabihf/libnss_dns.so.2
13. libnss_files.so -> /lib/arm-linux-gnueabihf/libnss_files.so.2
14. libnss_hesiod.so -> /lib/arm-linux-gnueabihf/libnss_hesiod.so.2
15. libnss_nisplus.so -> /lib/arm-linux-gnueabihf/libnss_nisplus.so.2
16. libnss_nis.so -> /lib/arm-linux-gnueabihf/libnss_nis.so.2
17. libpcre.so -> /lib/arm-linux-gnueabihf/libpcre.so.3
18. libpng12.so.0 -> /lib/arm-linux-gnueabihf/libpng12.so.0
19. libresolv.so -> /lib/arm-linux-gnueabihf/libresolv.so.2
20. librt.so -> /lib/arm-linux-gnueabihf/librt.so.1
21. libthread_db.so -> /lib/arm-linux-gnueabihf/libthread_db.so.1
22. libudev.so -> /lib/arm-linux-gnueabihf/libudev.so.1.6.4
23. libusb-1.0.so -> /lib/arm-linux-gnueabihf/libusb-1.0.so.0.1.0
24. libutil.so -> /lib/arm-linux-gnueabihf/libutil.so.1
25. libz.so -> /lib/arm-linux-gnueabihf/libz.so.1.2.8

I think arm-linux-gnueabihf is not install properly?
For reference Error log as below:-

/usr/lib/gcc-cross/arm-linux-gnueabihf/4.8/../../../../arm-linux-gnueabihf/bin/ld.gold: error: cannot open /mnt/a20/usr/lib/arm-linux-gnueabihf/librt.so: No such file or directory
/usr/lib/gcc-cross/arm-linux-gnueabihf/4.8/../../../../arm-linux-gnueabihf/bin/ld.gold: error: cannot open /mnt/a20/usr/lib/arm-linux-gnueabihf/libdl.so: No such file or directory
/usr/lib/gcc-cross/arm-linux-gnueabihf/4.8/../../../../arm-linux-gnueabihf/bin/ld.gold: error: cannot open /mnt/a20/usr/lib/arm-linux-gnueabihf/libz.so: No such file or directory
/usr/lib/gcc-cross/arm-linux-gnueabihf/4.8/../../../../arm-linux-gnueabihf/bin/ld.gold: error: cannot open /mnt/a20/usr/lib/arm-linux-gnueabihf/libdl.so: No such file or directory
/usr/lib/gcc-cross/arm-linux-gnueabihf/4.8/../../../../arm-linux-gnueabihf/bin/ld.gold: error: cannot open /mnt/a20/usr/lib/arm-linux-gnueabihf/libglib-2.0.so: No such file or directory
/usr/lib/gcc-cross/arm-linux-gnueabihf/4.8/../../../../arm-linux-gnueabihf/bin/ld.gold: error: cannot open /mnt/a20/usr/lib/arm-linux-gnueabihf/librt.so: No such file or directory
/usr/lib/gcc-cross/arm-linux-gnueabihf/4.8/../../../../arm-linux-gnueabihf/bin/ld.gold: error: cannot open /mnt/a20/usr/lib/arm-linux-gnueabihf/libm.so: No such file or directory
.obj/qlibrary_unix.o:qlibrary_unix.cpp:function qdlerror(): error: undefined reference to 'dlerror'
.obj/qlibrary_unix.o:qlibrary_unix.cpp:function QLibraryPrivate::unload_sys(): error: undefined reference to 'dlclose'
.obj/qlibrary_unix.o:qlibrary_unix.cpp:function QLibraryPrivate::resolve_sys(char const*): error: undefined reference to 'dlsym'
.obj/qlibrary_unix.o:qlibrary_unix.cpp:function QLibraryPrivate::load_sys(): error: undefined reference to 'dlopen'
.obj/qlibrary_unix.o:qlibrary_unix.cpp:function qt_linux_find_symbol_sys(char const*): error: undefined reference to 'dlsym'
.obj/qbytearray.o:qbytearray.cpp:function qUncompress(unsigned char const*, int): error: undefined reference to 'uncompress'
.obj/qbytearray.o:qbytearray.cpp:function qCompress(unsigned char const*, int, int): error: undefined reference to 'compress2'
.obj/qdatetime.o:qdatetime.cpp:function fromIsoTimeString(QStringRef const&, Qt::DateFormat, bool*): error: undefined reference to 'pow'
.obj/qdatetime.o:qdatetime.cpp:function fromIsoTimeString(QStringRef const&, Qt::DateFormat, bool*): error: undefined reference to 'floorf'
.obj/qdatetime.o:qdatetime.cpp:function fromIsoTimeString(QStringRef const&, Qt::DateFormat, bool*): error: undefined reference to 'pow'
.obj/qeasingcurve.o:qeasingcurve.cpp:function easeCosineCurve(double): error: undefined reference to 'cos'
.obj/qeasingcurve.o:qeasingcurve.cpp:function easeInOutSine(double): error: undefined reference to 'cos'
.obj/qeasingcurve.o:qeasingcurve.cpp:function easeSineCurve(double): error: undefined reference to 'sin'
.obj/qeasingcurve.o:qeasingcurve.cpp:function easeOutCurve(double): error: undefined reference to 'sin'
.obj/qeasingcurve.o:qeasingcurve.cpp:function easeInOutCirc(double): error: undefined reference to 'sqrt'
.obj/qeasingcurve.o:qeasingcurve.cpp:function easeInOutCirc(double): error: undefined reference to 'sqrt'
.obj/qeasingcurve.o:qeasingcurve.cpp:function easeOutCirc(double): error: undefined reference to 'sqrt'
.obj/qeasingcurve.o:qeasingcurve.cpp:function easeInCirc(double): error: undefined reference to 'sqrt'
.obj/qeasingcurve.o:qeasingcurve.cpp:function easeOutInSine(double): error: undefined reference to 'cos'
.obj/qeasingcurve.o:qeasingcurve.cpp:function easeOutInSine(double): error: undefined reference to 'sin'
.obj/qeasingcurve.o:qeasingcurve.cpp:function easeInOutExpo(double): error: undefined reference to 'pow'
.obj/qeasingcurve.o:qeasingcurve.cpp:function easeInOutExpo(double): error: undefined reference to 'pow'
.obj/qeasingcurve.o:qeasingcurve.cpp:function easeInSine(double): error: undefined reference to 'cos'
.obj/qeasingcurve.o:qeasingcurve.cpp:function easeInCurve(double): error: undefined reference to 'sin'
.obj/qeasingcurve.o:qeasingcurve.cpp:function ElasticEase::value(double): error: undefined reference to 'asin'
.obj/qeasingcurve.o:qeasingcurve.cpp:function ElasticEase::value(double): error: undefined reference to 'asin'
.obj/qeasingcurve.o:qeasingcurve.cpp:function ElasticEase::value(double): error: undefined reference to 'asin'
.obj/qeasingcurve.o:qeasingcurve.cpp:function ElasticEase::value(double): error: undefined reference to 'asin'
.obj/qline.o:qline.cpp:function QLineF::angle() const: error: undefined reference to 'atan2'
.obj/qline.o:qline.cpp:function QLineF::setAngle(double): error: undefined reference to 'sincos'
.obj/qline.o:qline.cpp:function QLineF::fromPolar(double, double): error: undefined reference to 'sincos'
.obj/qline.o:qline.cpp:function QLineF::angle(QLineF const&) const: error: undefined reference to 'acos'
.obj/qlocale_tools.o:qlocale_tools.cpp:function qdtoa(double, int, int, int*, int*, char**, char**): error: undefined reference to 'feholdexcept'
.obj/qlocale_tools.o:qlocale_tools.cpp:function qdtoa(double, int, int, int*, int*, char**, char**): error: undefined reference to 'fesetenv'
.obj/qrect.o:qrect.cpp:function QRectF::toAlignedRect() const: error: undefined reference to 'floor'
.obj/qrect.o:qrect.cpp:function QRectF::toAlignedRect() const: error: undefined reference to 'ceil'
.obj/qrect.o:qrect.cpp:function QRectF::toAlignedRect() const: error: undefined reference to 'floor'
.obj/qrect.o:qrect.cpp:function QRectF::toAlignedRect() const: error: undefined reference to 'ceil'
.obj/qtimeline.o:qtimeline.cpp:function QTimeLine::frameForTime(int) const: error: undefined reference to 'ceil'
.obj/qeventdispatcher_glib.o:qeventdispatcher_glib.cpp:function QEventDispatcherGlib::processEvents(QFlags<QEventLoop::ProcessEventsFlag>): error: undefined reference to 'g_main_context_iteration'
.obj/qeventdispatcher_glib.o:qeventdispatcher_glib.cpp:function QEventDispatcherGlib::processEvents(QFlags<QEventLoop::ProcessEventsFlag>): error: undefined reference to 'g_main_context_iteration'
.obj/qeventdispatcher_glib.o:qeventdispatcher_glib.cpp:function QEventDispatcherGlib::hasPendingEvents(): error: undefined reference to 'g_main_context_pending'
.obj/qeventdispatcher_glib.o:qeventdispatcher_glib.cpp:function QEventDispatcherGlib::unregisterSocketNotifier(QSocketNotifier*): error: undefined reference to 'g_source_remove_poll'
.obj/qeventdispatcher_glib.o:qeventdispatcher_glib.cpp:function QEventDispatcherGlib::unregisterSocketNotifier(QSocketNotifier*): error: undefined reference to 'g_source_remove_poll'
.obj/qeventdispatcher_glib.o:qeventdispatcher_glib.cpp:function QEventDispatcherGlib::~QEventDispatcherGlib(): error: undefined reference to 'g_source_destroy'
.obj/qeventdispatcher_glib.o:qeventdispatcher_glib.cpp:function QEventDispatcherGlib::~QEventDispatcherGlib(): error: undefined reference to 'g_source_unref'
.obj/qeventdispatcher_glib.o:qeventdispatcher_glib.cpp:function QEventDispatcherGlib::~QEventDispatcherGlib(): error: undefined reference to 'g_source_destroy'
.obj/qeventdispatcher_glib.o:qeventdispatcher_glib.cpp:function QEventDispatcherGlib::~QEventDispatcherGlib(): error: undefined reference to 'g_source_unref'
.obj/qeventdispatcher_glib.o:qeventdispatcher_glib.cpp:function QEventDispatcherGlib::~QEventDispatcherGlib(): error: undefined reference to 'g_source_remove_poll'
.obj/qeventdispatcher_glib.o:qeventdispatcher_glib.cpp:function QEventDispatcherGlib::~QEventDispatcherGlib(): error: undefined reference to 'g_source_destroy'
.obj/qeventdispatcher_glib.o:qeventdispatcher_glib.cpp:function QEventDispatcherGlib::~QEventDispatcherGlib(): error: undefined reference to 'g_source_unref'
.obj/qeventdispatcher_glib.o:qeventdispatcher_glib.cpp:function QEventDispatcherGlib::~QEventDispatcherGlib(): error: undefined reference to 'g_source_destroy'
.obj/qeventdispatcher_glib.o:qeventdispatcher_glib.cpp:function QEventDispatcherGlib::~QEventDispatcherGlib(): error: undefined reference to 'g_source_unref'
.obj/qeventdispatcher_glib.o:qeventdispatcher_glib.cpp:function QEventDispatcherGlib::~QEventDispatcherGlib(): error: undefined reference to 'g_main_context_pop_thread_default'
.obj/qeventdispatcher_glib.o:qeventdispatcher_glib.cpp:function QEventDispatcherGlib::~QEventDispatcherGlib(): error: undefined reference to 'g_main_context_unref'
.obj/qeventdispatcher_glib.o:qeventdispatcher_glib.cpp:function QEventDispatcherGlibPrivate::QEventDispatcherGlibPrivate(_GMainContext*): error: undefined reference to 'g_main_context_ref'
.obj/qeventdispatcher_glib.o:qeventdispatcher_glib.cpp:function QEventDispatcherGlibPrivate::QEventDispatcherGlibPrivate(_GMainContext*): error: undefined reference to 'g_main_context_push_thread_default'
.obj/qeventdispatcher_glib.o:qeventdispatcher_glib.cpp:function QEventDispatcherGlibPrivate::QEventDispatcherGlibPrivate(_GMainContext*): error: undefined reference to 'g_source_new'
.obj/qeventdispatcher_glib.o:qeventdispatcher_glib.cpp:function QEventDispatcherGlibPrivate::QEventDispatcherGlibPrivate(_GMainContext*): error: undefined reference to 'g_source_set_can_recurse'
.obj/qeventdispatcher_glib.o:qeventdispatcher_glib.cpp:function QEventDispatcherGlibPrivate::QEventDispatcherGlibPrivate(_GMainContext*): error: undefined reference to 'g_source_attach'
.obj/qeventdispatcher_glib.o:qeventdispatcher_glib.cpp:function QEventDispatcherGlibPrivate::QEventDispatcherGlibPrivate(_GMainContext*): error: undefined reference to 'g_source_new'
.obj/qeventdispatcher_glib.o:qeventdispatcher_glib.cpp:function QEventDispatcherGlibPrivate::QEventDispatcherGlibPrivate(_GMainContext*): error: undefined reference to 'g_source_set_can_recurse'
.obj/qeventdispatcher_glib.o:qeventdispatcher_glib.cpp:function QEventDispatcherGlibPrivate::QEventDispatcherGlibPrivate(_GMainContext*): error: undefined reference to 'g_source_attach'
.obj/qeventdispatcher_glib.o:qeventdispatcher_glib.cpp:function QEventDispatcherGlibPrivate::QEventDispatcherGlibPrivate(_GMainContext*): error: undefined reference to 'g_source_new'
.obj/qeventdispatcher_glib.o:qeventdispatcher_glib.cpp:function QEventDispatcherGlibPrivate::QEventDispatcherGlibPrivate(_GMainContext*): error: undefined reference to 'g_source_set_can_recurse'
.obj/qeventdispatcher_glib.o:qeventdispatcher_glib.cpp:function QEventDispatcherGlibPrivate::QEventDispatcherGlibPrivate(_GMainContext*): error: undefined reference to 'g_source_attach'
.obj/qeventdispatcher_glib.o:qeventdispatcher_glib.cpp:function QEventDispatcherGlibPrivate::QEventDispatcherGlibPrivate(_GMainContext*): error: undefined reference to 'g_source_new'
.obj/qeventdispatcher_glib.o:qeventdispatcher_glib.cpp:function QEventDispatcherGlibPrivate::QEventDispatcherGlibPrivate(_GMainContext*): error: undefined reference to 'g_source_set_can_recurse'
.obj/qeventdispatcher_glib.o:qeventdispatcher_glib.cpp:function QEventDispatcherGlibPrivate::QEventDispatcherGlibPrivate(_GMainContext*): error: undefined reference to 'g_source_set_priority'
.obj/qeventdispatcher_glib.o:qeventdispatcher_glib.cpp:function QEventDispatcherGlibPrivate::QEventDispatcherGlibPrivate(_GMainContext*): error: undefined reference to 'g_source_attach'
.obj/qeventdispatcher_glib.o:qeventdispatcher_glib.cpp:function QEventDispatcherGlibPrivate::QEventDispatcherGlibPrivate(_GMainContext*): error: undefined reference to 'g_main_context_new'
.obj/qeventdispatcher_glib.o:qeventdispatcher_glib.cpp:function QEventDispatcherGlibPrivate::QEventDispatcherGlibPrivate(_GMainContext*): error: undefined reference to 'g_main_context_default'
.obj/qeventdispatcher_glib.o:qeventdispatcher_glib.cpp:function QEventDispatcherGlibPrivate::QEventDispatcherGlibPrivate(_GMainContext*): error: undefined reference to 'g_main_context_ref'
.obj/qeventdispatcher_glib.o:qeventdispatcher_glib.cpp:function QEventDispatcherGlib::registerSocketNotifier(QSocketNotifier*): error: undefined reference to 'g_source_add_poll'
.obj/qeventdispatcher_glib.o:qeventdispatcher_glib.cpp:function QEventDispatcherGlib::wakeUp(): error: undefined reference to 'g_main_context_wakeup'
collect2: error: ld returned 1 exit status
make[2]: *** [../../lib/libQt5Core.so.5.6.0] Error 1

embedded_qt_newbie

Hello everyone,

Here is the same problem.
Anyone a solution for that?