cross compile of qt 4.8.5 for friendlyarm tiny 6410
-
1. tslib compilation
$cd /usr/local
$git clone http://github.com/kergoth/tslib.git
$export PATH=/usr/local/arm/4.3.2/bin:$PATH
$export CROSS_COMPILE=arm-none-linux-gnueabi-
$export CC=${CROSS_COMPILE}gcc
$export CFLAGS=-march=armv4t
$export CXX=${CROSS_COMPILE}"g++"
$export AR=${CROSS_COMPILE}"ar"
$export AS=${CROSS_COMPILE}"as"
$export RANLIB=${CROSS_COMPILE}"ranlib"
$export LD=${CROSS_COMPILE}"ld"
$export STRIP=${CROSS_COMPILE}"strip"
$export ac_cv_func_malloc_0_nonnull=yes
$cd /usr/local/tslib
$./autogen-clean.sh
$./autogen.sh
$./configure --host=arm-linux --prefix=/home/tslib --enable-shared=yes
--enable-static=yes
$make
$make installi followed this steps for first tslib installation but when i checked file
libts-1.0.so.0.0.0 in lib file then i got following output==>
libts-1.0.so.0.0.0: ELF 32-bit LSB shared object, "Intel 80386", version 1
(SYSV), dynamically linked,
BuildID[sha1]=0xd113e8e6a6562ca3bd32f286ed9611919adc9a44, not strippedi want arm instead of that Intel 80386??
-
Hi,
Did you check the value of CC ?
-
./configure --host=arm-linux --prefix=/home/tslib --enable-shared=yes --enable-static=yes
also when i execute above command at the last line i get some sentenceconfigure.ac:7: installing
./missing' plugins/Makefile.am: installing./depcomp'is that any error??
-
Where did you get the instruction to cross-compile tslib ?
-
The question might be silly but did you install a cross-compiler before doing that ?
-
this is single script file for tslib compilation "tslib.sh" ==>
export CROSS_COMPILE=/home/sachin/opt/FriendlyARM/toolschain/4.5.1/bin/arm-fsl-linux-gnueabi-
export CC=${CROSS_COMPILE}"gcc"
export CFLAGS=-march=armv7-a
export CXX=${CROSS_COMPILE}"g++"
export AR=${CROSS_COMPILE}"ar"
export AS=${CROSS_COMPILE}"as"
export RANLIB=${CROSS_COMPILE}"ranlib"
export LD=${CROSS_COMPILE}"ld"
export STRIP=${CROSS_COMPILE}"strip"
export ac_cv_func_malloc_0_nonnull=yes
sudo ./autogen-clean.sh
sudo ./autogen.sh
sudo ./configure --host=arm-fsl-linux-gnueabi --build=i386-linux-gnu-- prefix=/home/tslib --enable-shared=yes --enable-static=yes
sudo make
sudo make install
but not worked.... -
What errors do you have this time ?
-
sachin@Atishay:~/Documents/tslib$ sudo ./configure
--host=arm-fsl-linux-gnueabi --prefix=/home/tslib --enable-shared=yes
--enable-static=yes
[sudo] password for sachin:
configure: WARNING: if you wanted to set the --build type, don't use
--host.
If a cross compiler is detected then cross compile mode will be used
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for arm-fsl-linux-gnueabi-strip... no
checking for strip... strip
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking for arm-fsl-linux-gnueabi-gcc... no
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking for style of include used by make... GNU
checking dependency style of gcc... gcc3
checking how to run the C preprocessor... gcc -E
checking whether the C compiler supports -fvisibility=hidden... yes
checking whether to use -fvisibility=hidden... yes
checking whether ln -s works... yes
checking whether make sets $(MAKE)... (cached) yes
checking build system type... i686-pc-linux-gnu
checking host system type... arm-fsl-linux-gnueabi
checking how to print strings... printf
checking for a sed that does not truncate output... /bin/sed
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for fgrep... /bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... no
checking for arm-fsl-linux-gnueabi-dumpbin... no
checking for arm-fsl-linux-gnueabi-link... no
checking for dumpbin... no
checking for link... link -dump
checking the name lister (nm) interface... BSD nm
checking the maximum length of command line arguments... 1572864
checking whether the shell understands some XSI constructs... yes
checking whether the shell understands "+="... yes
checking how to convert i686-pc-linux-gnu file names to
arm-fsl-linux-gnueabi format... func_convert_file_noop
checking how to convert i686-pc-linux-gnu file names to toolchain format...
func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for arm-fsl-linux-gnueabi-objdump... no
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for arm-fsl-linux-gnueabi-dlltool... no
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for arm-fsl-linux-gnueabi-ar... no
checking for ar... ar
checking for archiver @FILE support... @
checking for arm-fsl-linux-gnueabi-strip... strip
checking for arm-fsl-linux-gnueabi-ranlib... no
checking for ranlib... ranlib
checking command to parse nm output from gcc object... ok
checking for sysroot... no
checking for arm-fsl-linux-gnueabi-mt... no
checking for mt... mt
checking if mt is a manifest tool... no
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/bin/ld) supports shared libraries...
yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking for shl_load... no
checking for shl_load in -ldld... no
checking for dlopen... no
checking for dlopen in -ldl... yes
checking whether a program can dlopen itself... yes
checking whether a statically linked program can dlopen itself... no
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for dlopen in -ldl... (cached) yes
checking for size_t... yes
checking for working alloca.h... yes
checking for alloca... yes
checking for ANSI C header files... (cached) yes
checking fcntl.h usability... yes
checking fcntl.h presence... yes
checking for fcntl.h... yes
checking limits.h usability... yes
checking limits.h presence... yes
checking for limits.h... yes
checking for stdlib.h... (cached) yes
checking for string.h... (cached) yes
checking sys/ioctl.h usability... yes
checking sys/ioctl.h presence... yes
checking for sys/ioctl.h... yes
checking sys/time.h usability... yes
checking sys/time.h presence... yes
checking for sys/time.h... yes
checking for unistd.h... (cached) yes
checking for an ANSI C-conforming const... yes
checking for inline... inline
checking for size_t... (cached) yes
checking whether time.h and sys/time.h may both be included... yes
checking whether gcc needs -traditional... no
checking for stdlib.h... (cached) yes
checking for unistd.h... (cached) yes
checking for sys/param.h... yes
checking for getpagesize... yes
checking for working mmap... yes
checking sys/select.h usability... yes
checking sys/select.h presence... yes
checking for sys/select.h... yes
checking sys/socket.h usability... yes
checking sys/socket.h presence... yes
checking for sys/socket.h... yes
checking types of arguments for select... int,fd_set *,struct timeval *
checking return type of signal handlers... void
checking whether lstat correctly handles trailing slash... yes
checking whether stat accepts an empty string... no
checking for vprintf... yes
checking for _doprnt... no
checking for gettimeofday... yes
checking for memmove... yes
checking for memset... yes
checking for munmap... yes
checking for select... yes
checking for strcasecmp... yes
checking for strchr... yes
checking for strdup... yes
checking for strtoul... yes
checking whether linear module is requested... yes
checking whether dejitter module is requested... yes
checking whether linear-h2200 module is requested... yes
checking whether variance module is requested... yes
checking whether pthres module is requested... yes
checking whether ucb1x00 module is requested... yes
checking whether cy8mrln-palmpre module is requested... no
checking whether corgi module is requested... yes
checking whether collie module is requested... yes
checking whether h3600 module is requested... yes
checking whether mk712 module is requested... yes
checking whether arctic2 module is requested... yes
checking whether tatung module is requested... yes
checking whether dmc module is requested... yes
checking whether input module is requested... yes
checking whether touchkit module is requested... yes
checking whether galax module is requested... yes
checking where to place modules... ${libdir}/ts
checking whether to enable debugging... no
configure: creating ./config.status
config.status: creating Makefile
config.status: creating etc/Makefile
config.status: creating plugins/Makefile
config.status: creating src/Makefile
config.status: creating tests/Makefile
config.status: creating tslib.pc
config.status: creating tslib-1.0.pc
config.status: creating config.h
config.status: config.h is unchanged
config.status: executing depfiles commands
config.status: executing libtool commandsranlib,cc,gcc,ld etc value are not taking...i m confused with above output...
above ./configure command is executed succesfully without any error but
when i checked cd /home/tslib/lib in that libts file....and i run the
following command to check cross compiler is created or not...file libts
it shows only "intel" and i want "arm" instead of these.
-
Hi,
Topic title says that you want to cross compile Qt 4.8.5 but the post contains cross compilation of tslib.
What you actually want to do?
--Kumara
-
hello,for cross compile Qt 4.8.5 i have to follow following steps=>
- tslib compilation
- Qt4.8.5 compilation
- Copy library of tslib and Qt4.8.5 into mini6410 board.
- Configure the environment in mini6410 board.
- Run Qt example program.
in this my first step is tslib compilation and not compiled..
-
hello,for cross compile Qt 4.8.5 i have to follow following steps=>
- tslib compilation
- Qt4.8.5 compilation
- Copy library of tslib and Qt4.8.5 into mini6410 board.
- Configure the environment in mini6410 board.
- Run Qt example program.
in this my first step is tslib compilation and not compiled..
@sachin786 What error messages do you get if you try to compile tslib?
-
sachin@Atishay:~/Documents/tslib$ sudo ./configure
--host=arm-fsl-linux-gnueabi --prefix=/home/tslib --enable-shared=yes
--enable-static=yes
[sudo] password for sachin:
configure: WARNING: if you wanted to set the --build type, don't use
--host.
If a cross compiler is detected then cross compile mode will be used
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for arm-fsl-linux-gnueabi-strip... no
checking for strip... strip
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking for arm-fsl-linux-gnueabi-gcc... no
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking for style of include used by make... GNU
checking dependency style of gcc... gcc3
checking how to run the C preprocessor... gcc -E
checking whether the C compiler supports -fvisibility=hidden... yes
checking whether to use -fvisibility=hidden... yes
checking whether ln -s works... yes
checking whether make sets $(MAKE)... (cached) yes
checking build system type... i686-pc-linux-gnu
checking host system type... arm-fsl-linux-gnueabi
checking how to print strings... printf
checking for a sed that does not truncate output... /bin/sed
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for fgrep... /bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... no
checking for arm-fsl-linux-gnueabi-dumpbin... no
checking for arm-fsl-linux-gnueabi-link... no
checking for dumpbin... no
checking for link... link -dump
checking the name lister (nm) interface... BSD nm
checking the maximum length of command line arguments... 1572864
checking whether the shell understands some XSI constructs... yes
checking whether the shell understands "+="... yes
checking how to convert i686-pc-linux-gnu file names to
arm-fsl-linux-gnueabi format... func_convert_file_noop
checking how to convert i686-pc-linux-gnu file names to toolchain format...
func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for arm-fsl-linux-gnueabi-objdump... no
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for arm-fsl-linux-gnueabi-dlltool... no
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for arm-fsl-linux-gnueabi-ar... no
checking for ar... ar
checking for archiver @FILE support... @
checking for arm-fsl-linux-gnueabi-strip... strip
checking for arm-fsl-linux-gnueabi-ranlib... no
checking for ranlib... ranlib
checking command to parse nm output from gcc object... ok
checking for sysroot... no
checking for arm-fsl-linux-gnueabi-mt... no
checking for mt... mt
checking if mt is a manifest tool... no
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/bin/ld) supports shared libraries...
yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking for shl_load... no
checking for shl_load in -ldld... no
checking for dlopen... no
checking for dlopen in -ldl... yes
checking whether a program can dlopen itself... yes
checking whether a statically linked program can dlopen itself... no
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for dlopen in -ldl... (cached) yes
checking for size_t... yes
checking for working alloca.h... yes
checking for alloca... yes
checking for ANSI C header files... (cached) yes
checking fcntl.h usability... yes
checking fcntl.h presence... yes
checking for fcntl.h... yes
checking limits.h usability... yes
checking limits.h presence... yes
checking for limits.h... yes
checking for stdlib.h... (cached) yes
checking for string.h... (cached) yes
checking sys/ioctl.h usability... yes
checking sys/ioctl.h presence... yes
checking for sys/ioctl.h... yes
checking sys/time.h usability... yes
checking sys/time.h presence... yes
checking for sys/time.h... yes
checking for unistd.h... (cached) yes
checking for an ANSI C-conforming const... yes
checking for inline... inline
checking for size_t... (cached) yes
checking whether time.h and sys/time.h may both be included... yes
checking whether gcc needs -traditional... no
checking for stdlib.h... (cached) yes
checking for unistd.h... (cached) yes
checking for sys/param.h... yes
checking for getpagesize... yes
checking for working mmap... yes
checking sys/select.h usability... yes
checking sys/select.h presence... yes
checking for sys/select.h... yes
checking sys/socket.h usability... yes
checking sys/socket.h presence... yes
checking for sys/socket.h... yes
checking types of arguments for select... int,fd_set *,struct timeval *
checking return type of signal handlers... void
checking whether lstat correctly handles trailing slash... yes
checking whether stat accepts an empty string... no
checking for vprintf... yes
checking for _doprnt... no
checking for gettimeofday... yes
checking for memmove... yes
checking for memset... yes
checking for munmap... yes
checking for select... yes
checking for strcasecmp... yes
checking for strchr... yes
checking for strdup... yes
checking for strtoul... yes
checking whether linear module is requested... yes
checking whether dejitter module is requested... yes
checking whether linear-h2200 module is requested... yes
checking whether variance module is requested... yes
checking whether pthres module is requested... yes
checking whether ucb1x00 module is requested... yes
checking whether cy8mrln-palmpre module is requested... no
checking whether corgi module is requested... yes
checking whether collie module is requested... yes
checking whether h3600 module is requested... yes
checking whether mk712 module is requested... yes
checking whether arctic2 module is requested... yes
checking whether tatung module is requested... yes
checking whether dmc module is requested... yes
checking whether input module is requested... yes
checking whether touchkit module is requested... yes
checking whether galax module is requested... yes
checking where to place modules... ${libdir}/ts
checking whether to enable debugging... no
configure: creating ./config.status
config.status: creating Makefile
config.status: creating etc/Makefile
config.status: creating plugins/Makefile
config.status: creating src/Makefile
config.status: creating tests/Makefile
config.status: creating tslib.pc
config.status: creating tslib-1.0.pc
config.status: creating config.h
config.status: config.h is unchanged
config.status: executing depfiles commands
config.status: executing libtool commandsranlib,cc,gcc,ld etc value are not taking...i m confused with above output...
above ./configure command is executed succesfully without any error but
when i checked cd /home/tslib/lib in that libts file....and i run the
following command to check cross compiler is created or not...file libts
it shows only "intel" and i want "arm" instead of these.
-
Can you call
arm-fsl-linux-gnueabi-gcc -vfrom your terminal ?Also, don't do development or compilation as root.
-
Take a look at the beginning of the output:
"configure: WARNING: if you wanted to set the --build type, don't use --host."
I'm not an expert in cross compilation, but it looks like you should use --build and not --host
