Boot to Qt Installation
-
Hi,
Indeed, it's a a product from Digia
-
For a non-commercial entity like myself (hobbyist), I cannot afford to subscribe to the service. I'd consider just paying a fee to get a download of it to start from as the devices they have isn't the one I have. I can't see paying $200+/month for however long. I don't need help with it, just the ability to use it.
Sad day.
-
IIRC, they now proposes a monthly subscription, you should check Digia's site for details
-
See "here":http://qt.digia.com/Product/Qt-Enterprise-Embedded/ and contact Digia for more information about what you get for that
-
Hi,
[quote author="Mr_Ada" date="1403792957"]I downloaded the trial version and it is the same product as the free version as far as I can tell. So I am not understanding where Boot to Qt comes into play.[/quote]The free product is the Qt libraries plus a number of tools (such as the Qt Creator IDE).
Boot to Qt (part of Qt Enterprise Embedded) is a software stack that is built with the free Qt libraries. Qt Enterprise Embedded also comes with a number of extra library components that are not available for free, such as a virtual keyboard, data visualization libraries, advanced UI components, and cloud services.
Boot to Qt is targeted at commercial embedded system designers. The software stack includes pre-built filesystem images, which you can flash into your embedded device and run Qt immediately -- this enables rapid prototyping which reduces time-to-market.
These images are not available for free, but they probably aren't important to hobbyists who don't need to worry about time-to-market.
[quote author="Mr_Ada" date="1403715661"]I'd like to use Boot To Qt on my project but it seems that I have to pay for a commercial subscription to do this?
Chris.[/quote]You can use Qt without using Boot to Qt. Hobbyists usually stick to the free components; you can configure + build your own system images.What kind of project are you planning to do?
If you want to create an embedded system, set up a Linux filesystem on your device (e.g. Raspberry Pi or Beaglebone Black). Then, download the Qt source code and cross-compile Qt for your target device.
If you simply want to create an Android app, then you don't even need to worry about the filesystem or cross-compilation. Just download Qt for Android (which is free), build an app and upload it into your Android phone/tablet.
-
I am working currently on an automotive gauge project. I will expand to other applications later on. I am going to replace the analog gauges in my project car with these new gauges. I figured I'd use a tablet because they have great resolution and size, weight, etc. Getting a Pi or Beaglebone is not as powerful a system as I want it and a tablet is pretty much all there. My only project is that I have a tablet that isn't under any currently hobbyist radar like the Nexus ones are, etc. I have been able to get my boot times on my Samsung Galaxy Tab 3 7" down to 19 seconds but that is way too long. There is too much Android stuff running. I want something that will come up fast like the demo from Linutronix back in 2011. They has a slow ARM processor and Qt was up and running colliding mice within 2 seconds. Impressive. That is what I want. If I could take this Android device and "de-Android" it I would really love it. If I cannot then I want something that will bypass all of the Samsung/Sprint/junk that gets run and go directly to an app of my own. Basically the launcher would be my program.
I have been able to build a small gauge and make an APK file for my tablet so I know that I can do that but those boot up times are awful!
Other SW engineers I know say why not use the sleep feature of the tablet. I just want it to come up immediately without constantly drawing power to keep itself hibernated.
Chris
-
You could root your tablet and install Ubuntu on it. It has apparently been done on a few Galaxy Tabs, but I haven't seen anything for Tab 3 7": https://wiki.ubuntu.com/Touch/Devices The page says that a few Nexus tablets are officially-supported, so you may want to get a different tablet to make life easier.
(I've used Angstrom before for a BeagleBoard-based project, but it doesn't seem well-maintained -- that's why I suggested Ubuntu)
-
@JKSH: I think getting another tablet might be the answer. I have seen the page you are referring too and my unit the T217S isn't listed and I don't know how close/far the other tablets are to mine in terms of hardware, etc. I know an Ubuntu.img can run on the device as I have done that run on top of Android app (VNC based) and it worked once. After rooting and debloating it won't run any more. I have even considered doing a reverse engineer on the low level stuff so that I can build an API that I could use. A lot of work but I am trying easy options first.
@agocs: If I can figure out they do it, then I can do the same. I tried to follow the instructions on the yocto stuff and downloading using the Maintenance tool and the Boot2Qt doesn't exist. I suspect only if you pay for it will they let you look at it.
So the trial version of embedded Qt is a wash for me.
I may go to linutronix and maybe see if I can get that to work. I know they use Qt and Yocto so maybe their instructions are more straight forward.
-
Can someone please help?
I am trying to install the Boot to Qt project, but I am having difficulty following the instructions. I am running 64-bit Ubuntu 13.10 , and have successfully installed VirtualBox as per instructions. What I am having difficulty with is the next part of the instructions and that is to configure VirtualBox network settings. The instructions say to open VirtualBox network settings. Where do I do this in the VM VirtualBox Manager? Is that for a specific VM? VMs haven't been set up at this point. If so, there is no facility here to perform the File > Preferences (Network Tab) create network called vboxnet0 as per instructions. Is it in Ubuntu network settings? If so this still does not lead me to the required options. Can someone please guide me thru step by step how to get to this point? I'm sorry if this is all obvous to you, but it isn't to me. Your asistance will be appreciated.
@bernardj100
Did you ever fix this problem?- I have a similar problem with booting to qt on a SabreSD board
- it puts up the uboot splash screen, then nothing else happens
- and I don't seem to get anything out of the console port
-
@bernardj100
Did you ever fix this problem?- I have a similar problem with booting to qt on a SabreSD board
- it puts up the uboot splash screen, then nothing else happens
- and I don't seem to get anything out of the console port
- ok - not to worry
- I got my sabresd board booting ok
- in my case it was 1) I had my terminal program set to 115k2 baud, not the required 38k4
And once I could see the console output, I could see that uboot was failing to find the MMC card
- which was because I had the Config DIPs set to boot from the alternative SD slot
- which was something I'd changed during development
Anyway, once the DIP switches were set back to the default, and the SD card placed in the expect slot, it booted ok!
