[PLEASE HELP] how to make a barcode receiver?

mrjj

@JKSH
Hi
this mode, i wonder if
alt text

does not install a virtual comport and allows to use usb connection much like
serial over USB converter. just without the converter.

What do you think ? ( purely guessing here)

raven-worx

@JKSH said in [PLEASE HELP] how to make a barcode receiver?:

Qt Serial Port works with serial ports. A USB port is not a serial port.

thats not true. Of course QtSerialPort works with USB.
USB = Universal Serial Bus

The code above i've posted definitively works with a USB Barcode scanner and i used it myself already.

? Offline

@raven-worx
0_1534947972491_3255bdcc-2942-41cb-986a-e4f1bb6adf9c-image.png
I'm using ubuntu now

SGaist

Hi,

It's QSerialPortInfo.

? Offline

0_1534969744372_9c1d0188-4bd4-47a2-9e26-5799df5452cc-image.png

i dosn't do any thing it always execute "else"
QSerialPort::SerialPortError(DeviceNotFoundError)

SGaist

And what is the error ?

kuzulis

@raven-worx said in [PLEASE HELP] how to make a barcode receiver?:

thats not true. Of course QtSerialPort works with USB.
USB = Universal Serial Bus

What? QtSerialPort works only with serial ports. It has nothing common with USB... Please don't confuse peoples. ;)

JKSH

@davidlabib said in [PLEASE HELP] how to make a barcode receiver?:

QSerialPort::SerialPortError(DeviceNotFoundError)

Well, that means your program can't find a port called COM4. Read the comments in @raven-worx's code and think about what they are asking you to do.

What is the name of the port that your scanner is connected to? https://www.cyberciti.biz/faq/find-out-linux-serial-ports-with-setserial/

@raven-worx said in [PLEASE HELP] how to make a barcode receiver?:

The code above i've posted definitively works with a USB Barcode scanner and i used it myself already.

My apologies; I didn't read the codes or think of the scenario that @mrjj highlighted in his last post.

If the barcode scanner implements RS232-over-USB, then you're right -- Qt Serial Port can indeed work with the scanner via the USB port.

QtSerialPort works with USB.
USB = Universal Serial Bus

Even though they both have "serial" in their names, Universal Serial Bus is completely unrelated to old-school serial ports. The term "serial port" usually refers to an RS-232 port: https://en.wikipedia.org/wiki/Serial_port

A USB device can be programmed to emulate serial port comms, but these are the minority. You cannot, for example, use Qt Serial Port to read your USB keyboard.

? Offline

@JKSH i didn't worked
i tried form com 1 to com 18
non of them worked

JKSH

@davidlabib said in [PLEASE HELP] how to make a barcode receiver?:

@JKSH i didn't worked
i tried form com 1 to com 18
non of them worked

What is the name of the port that your scanner is connected to? COMX is a Windows name. Linux names are different.

Read https://www.cyberciti.biz/faq/find-out-linux-serial-ports-with-setserial/ to find the name on your Ubuntu machine.

? Offline

same error
i tried from ttyS0 to ttyS5 didn't work

JKSH

@davidlabib said in [PLEASE HELP] how to make a barcode receiver?:

same error
i tried from ttyS0 to ttyS5 didn't work

You didn't answer my question. What is the name of the port that your scanner is connected to?

Also, what does QSerialPortInfo::availablePorts() give you? http://doc.qt.io/qt-5/qserialportinfo.html#availablePorts

? Offline

@JKSH ok i could find the right port and passed from

if( port->open(QSerialPort::ReadOnly) )

now I'm stuck on

if( !port->bytesAvailable() )
                  return;

it always return
witch mean no bytes is available

JKSH

@davidlabib said in [PLEASE HELP] how to make a barcode receiver?:

now I'm stuck on
if( !port->bytesAvailable() )
                  return;
it always return
witch mean no bytes is available

Did you choose the correct settings? How is your scanner configured for the following?

Baud rate
Parity
Data bits
Stop bits
Flow control

? Offline

@JKSH
Baud rate 115200

aha_1980

@davidlabib

I guess you don't have permission to use the serial port.

Please type: ls -l /dev/<your-serial-port-name> in a terminal and post the output here.

? Offline

@aha_1980 yes i don't have
but i use sudo

SGaist

Don't develop as super-user.

The command @aha_1980 will show the user and group affected to the device. Add your own user to that group, then log out and log in again and you will have access to the device.

aha_1980

@davidlabib Better add your user to the group dialout and reboot your computer.

Of course sudo works, but may give new problems.

As @JKSH wrote, not only baudrate is important.

I'd suggest to use a terminal program first to verify your scanner works correctly. Then use the same parameters for your code.

? Offline

solved PermissionError
now iam stuck in this

   QSerialPort* port = new QSerialPort( this );
   QSerialPortInfo::availablePorts();
   port->setBaudRate( QSerialPort::Baud115200 ); // possible something else, also check the manual
   port->setPort( QSerialPortInfo("ttyACM0") ); // COM port - check Device Manager for connected port
   QSerialPortInfo::availablePorts();
   if( port->open(QSerialPort::ReadOnly) )
   {
       ui->label->setText("port opended sucssefully");
           connect(port, &QSerialPort::readyRead, this, [port]() {
                 if( !port->bytesAvailable() )
                     qDebug() << port->error(); ////////// I'm stuck here it seems that there is no data
                      return;
                 const QByteArray scannedData = port->readAll();
                 // ...
           });
   }
   else
   {
       ui->label->setText("Error");
       qDebug() << port->error();
       QSerialPortInfo::availablePorts();
   }
}

also it will execute this if i clicked a button what if the user didn't click