4. Reinstall Qt5 with QtMultimedia using Ubuntu Mate

Reinstall Qt5 with QtMultimedia using Ubuntu Mate


  • @SGaist i installed your suggested packages and now output is:

    Note: Also available for Linux: linux-clang linux-icc

Note: Dropped compiler flags '-pthread' when detecting library 'glib'.

Note: Disabling X11 Accessibility Bridge: D-Bus or AT-SPI is missing.

Note: Dropped compiler flags '-pthread' when detecting library 'gstreamer'.

Note: Dropped compiler flags '-pthread' when detecting library 'gstreamer_app'.

ERROR: Feature 'system-ffmpeg' was enabled, but the pre-condition 'libs.ffmpeg && features.system-opus && features.system-webp' failed.

    @Jsulm i dont want to install ffmpeg from source. I just installed already the package and the error still occurs and i just googled the problem and the solution was to install from source

    0
  • Lifetime Qt Champion

    Check the logs for the related errors. You can also use the -v option to get a more verbose output of the configuration process.

    1 1 Reply

  • @SGaist I think i found the relevant piece of information in config.log

    looking for library ffmpeg
Trying source 0 (type pkgConfig) of library ffmpeg ...
+ /usr/bin/pkg-config --exists --silence-errors libavcodec libavformat libavutil
pkg-config did not find package.
  => source produced no result.
test config.qtwebengine.libraries.ffmpeg FAILED
executing config test ninja
Building own ninja
test config.qtwebengine.tests.ninja FAILED
looking for library opus
Trying source 0 (type pkgConfig) of library opus ...
+ /usr/bin/pkg-config --exists --silence-errors opus
pkg-config did not find package.
  => source produced no result.
test config.qtwebengine.libraries.opus FAILED
executing config test re2
+ cd /home/blz/Downloads/qt-everywhere-opensource-src-5.9.3/config.tests/re2 && /home/blz/Downloads/qt-everywhere-opensource-src-5.9.3/qtbase/bin/qmake "CONFIG -= qt debug_and_release app_bundle lib_bundle" "CONFIG += shared use_gold_linker warn_off console single_arch" /home/blz/Downloads/qt-everywhere-opensource-src-5.9.3/qtwebengine/config.tests/re2
+ cd /home/blz/Downloads/qt-everywhere-opensource-src-5.9.3/config.tests/re2 && MAKEFLAGS= /usr/bin/make clean && MAKEFLAGS= /usr/bin/make
> rm -f re2.o
> rm -f *~ core *.core
> g++ -c -pipe -O2 -std=gnu++11 -w -fPIC  -I/home/blz/Downloads/qt-everywhere-opensource-src-5.9.3/qtwebengine/config.tests/re2 -I. -I/home/blz/Downloads/qt-everywhere-opensource-src-5.9.3/qtbase/mkspecs/linux-g++ -o re2.o /home/blz/Downloads/qt-everywhere-opensource-src-5.9.3/qtwebengine/config.tests/re2/re2.cpp
> /home/blz/Downloads/qt-everywhere-opensource-src-5.9.3/qtwebengine/config.tests/re2/re2.cpp:29:21: fatal error: re2/re2.h: No such file or directory
> compilation terminated.
> Makefile:1021: recipe for target 're2.o' failed
> make: *** [re2.o] Error 1
test config.qtwebengine.tests.re2 FAILED
looking for library webp
Trying source 0 (type pkgConfig) of library webp ...
+ /usr/bin/pkg-config --exists --silence-errors libwebp libwebpdemux
pkg-config did not find package.
  => source produced no result.
test config.qtwebengine.libraries.webp FAILED
    0
  • Lifetime Qt Champion

    Install the libavformat and libavutil dev packages. Same goes for opus.

    0 1 Reply

  • @SGaist no error anymore. Thanks for you help. I am gonna mark this solved after i ran make and make install

    0

  • @SGaist
    Oh well, here are some errors.. Should i be worried or not?

    /usr/lib/gcc/arm-linux-gnueabihf/5/../../../arm-linux-gnueabihf/crt1.o(.text+0x28): error: undefined reference to 'main'
collect2: error: ld returned 1 exit status
Makefile:81: recipe for target 'schema' failed
make[4]: *** [schema] Error 1
make[4]: Leaving directory '/home/blz/Downloads/qt-everywhere-opensource-src-5.9.3/qtxmlpatterns/examples/xmlpatterns/schema'
Makefile:122: recipe for target 'sub-schema-make_first' failed
make[3]: *** [sub-schema-make_first] Error 2
make[3]: Leaving directory '/home/blz/Downloads/qt-everywhere-opensource-src-5.9.3/qtxmlpatterns/examples/xmlpatterns'
Makefile:44: recipe for target 'sub-xmlpatterns-make_first' failed
make[2]: *** [sub-xmlpatterns-make_first] Error 2
make[2]: Leaving directory '/home/blz/Downloads/qt-everywhere-opensource-src-5.9.3/qtxmlpatterns/examples'
Makefile:97: recipe for target 'sub-examples-make_first' failed
make[1]: *** [sub-examples-make_first] Error 2
make[1]: Leaving directory '/home/blz/Downloads/qt-everywhere-opensource-src-5.9.3/qtxmlpatterns'
Makefile:282: recipe for target 'module-qtxmlpatterns-make_first' failed
make: *** [module-qtxmlpatterns-make_first] Error 2

    I am gonna not use make install just yet, because errors and wait for your answer.

    0 1 Reply

  • @Xenoshell
    Just to let you know: I am the person who tried to help with your original "why I am unable to use the camera without freezing?" question!

    I see this thread is getting long, I do hope my advice to sort out your multimedia installation fully is worth it for all this compiling etc. you're doing, and not a red-herring...!!

    0
  • Lifetime Qt Champion

    Don't build the tests nor the example, especially since your are cross-compiling. There's no use for that and you'll waste space, time and electricity for nothing.

    1 1 Reply

  • @SGaist So are the errors now important or can i just install without worries?
    @JonB I just wanna cross out all possibilities what could be wrong

    0 1 Reply
  • Qt Champions 2019

    @Xenoshell As you can see from what you posted those errors are coming from examples. As @SGaist suggested there is no need to build examples and tests (so, no these errors are not important). Use -skip to not to build examples and tests.

    0 1 Reply

  • @jsulm yeah, since make is now finished its a little bit too late to skip the examples. But its good to know that those errors dont matter

    0

  • @jsulm , @JonB somehow in the qt5 folder there is no qtmultimedia. I think i am going mental

    0 1 Reply
  • Qt Champions 2019

    @Xenoshell make install ?

    0 1 Reply

  • @jsulm yeah already did that

    0 1 Reply
  • Qt Champions 2019

    @Xenoshell Do you mean there is no libQt5Multimedia.* in lib directory and no header files?

    0 1 Reply

  • @jsulm nope in the lib folder there is only just everything else. Here is my command i used ./configure -opengl desktop -gui -widgets -gstreamer -pulseaudio -alsa -ffmpeg -dbus-linked, Do i maybe have to also add -multimedia?? I dont think there even is that command, but what do i have to do to install QtMultimedia

    0
  • Lifetime Qt Champion

    Are you calling configure from the top folder ?
    If so, did you clean everything before calling configure again ?

    As I suggest every time: use out of source builds, that way if something goes wrong or you want to use a different set of option, you can simply nuke everything or change the folder and you know for sure you start from a clean state.

    0 1 Reply

  • @SGaist i called configure from the top folder i got from the .tar.gz file. I just deleted config.cache before calling configure again. How would i go about cleaning everything before calling configure again? What are out of source builds?

    0
  • Lifetime Qt Champion

    make distclean or make confclean

    As the name suggests: builds that happens out of the source tree.

    Basically:

    mkdir /home/your_user/build_qt5
pushd /home/your_user/build_qt5
/path/to/Qt_sources/configure -nomake tests -nomake examples
make -j (number_of_cores * 2 + 1)
make install
popd
    0 1 Reply

  • @SGaist Ok, is this even useful now? I mean i already installed Qt5 so isnt it a little bit too late?
    Btw in my other post about my code are some new outputs since i installed Qt5.

    0
  • Lifetime Qt Champion

    It will be in the future when you'll build Qt again.

    0
module 25 install 21
Log in to reply