my cross compiler has error.tslib install but has error

SGaist

By the way, stop doing everything as root. You should only do the install part as root if needed.

MhM93

thank you for reply and I am exceuse to annoy you,
@SGaist as you said I used sudo just where nedded.
@jsulm I delete my tslib from /usr/local and /home and follow this steps :

$sudo apt-get install git-core
$cd /usr/local
$git clone http://github.com/kergoth/tslib.git
$export PATH=/usr/local/arm/4.7.0/bin:$PATH--> did not do this because my compiler export befor
$export CROSS_COMPILE=arm-none-linux-gnueabi-
$export CC=${CROSS_COMPILE}gcc
$export CFLAGS=-march=armv7l
$export CXX=${CROSS_COMPILE}"g++" 
$export AR=${CROSS_COMPILE}"ar" 
$export AS=${CROSS_COMPILE}"as"
$export RANLIB=${CROSS_COMPILE}"ranlib"
$export LD=${CROSS_COMPILE}"ld"
$export STRIP=${CROSS_COMPILE}"strip"
$export ac_cv_func_malloc_0_nonnull=yes
$cd /usr/local/tslib
$sudo ./autogen-clean.sh
$sudo ./autogen.sh
$sudo ./configure --host=arm-linux --prefix=/home/tslib --enable-shared=yes --enable-static=yes
$sudo make
$sudo make install

then tar my qt4.8.6 again, but that error occurred again, also set the

LIBS += -L/home/tslib -ltslib

but that error occurred again, you said : "It is actually easy: -LPATH - here PATH must be the directory where libtslib.so file is." there is no file in my ubuntu with this name,
as my post before this post ,you told me to wrote "ldd ./myprogram" but my program is returned not a dynamic executable but when I wrote this command with nanopc-t2 it returns:

root@NanoPC-T2:/# ldd ./usr/local/Trolltech/QtEmbedded-4.8.6-arm/demos/embedded/fluidlauncher/fluidlauncher
        libQtGui.so.4 => /usr/local/Trolltech/QtEmbedded-4.8.6-arm/lib/libQtGui.so.4 (0xb668d000)
        libQtNetwork.so.4 => /usr/local/Trolltech/QtEmbedded-4.8.6-arm/lib/libQtNetwork.so.4 (0xb6595000)
        libQtCore.so.4 => /usr/local/Trolltech/QtEmbedded-4.8.6-arm/lib/libQtCore.so.4 (0xb62d4000)
        libpthread.so.0 => /lib/arm-linux-gnueabihf/libpthread.so.0 (0xb62a7000)
        libstdc++.so.6 => /usr/lib/arm-linux-gnueabihf/libstdc++.so.6 (0xb6199000)
        libm.so.6 => /lib/arm-linux-gnueabihf/libm.so.6 (0xb6121000)
        libgcc_s.so.1 => /lib/arm-linux-gnueabihf/libgcc_s.so.1 (0xb60f8000)
        libc.so.6 => /lib/arm-linux-gnueabihf/libc.so.6 (0xb600c000)
        libts-1.0.so.0 => /usr/lib/libts-1.0.so.0 (0xb5ffa000)
        libz.so.1 => /lib/arm-linux-gnueabihf/libz.so.1 (0xb5fd8000)
        libdl.so.2 => /lib/arm-linux-gnueabihf/libdl.so.2 (0xb5fc5000)
        librt.so.1 => /lib/arm-linux-gnueabihf/librt.so.1 (0xb5fae000)
        /lib/ld-linux-armhf.so.3 (0xb6ef5000)

this means these librarys should be install on my ubuntu to compile my program and copy it to device(nanopc-T2) and run with.

I am been helpless in this field,

jsulm

@MhM93 First: you can see what was installed and where when looking at the output of "make install" - did you check it?
Second: if the file is not there then it apparently wasn't built.
You can see what was built looking at the output of make - did you?
Did you check the tslib build instructions?
Yes, it is easy if you have the correct lib, but if you don't, well, then you're lost.
So, please make sure you built tslib as shared library - before that you will not succeed...
Did you try to change --enable-static=yes to --enable-static=no ?

Also: I don't know what exactly the file name of the library will be. It should be something like libtslib.so. Just check the content of /home/tslib. And please check the output of make and make install.

SGaist

And again, stop doing stuff as root, you might be breaking your computer without any warning.

When building somehting do it somewhere in your home folder. There's no sense in having the sources and the build artifacts of your tslib in /usr/local.

MhM93

@SGaist Thanks for help, I install the tslib from git to home directory, and do the command without sudo command, but when I want to run ./configure command it needs sudo.

fgit@ubuntu:~/tslib$ ./configure --host=arm-linux --prefix=/home/fgit/libts --enable-

shared=yes --enable-static=no
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for arm-linux-strip... arm-none-linux-gnueabihf-strip
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking whether make supports nested variables... (cached) yes
checking build system type... x86_64-pc-linux-gnu
checking host system type... arm-unknown-linux-gnu
checking for arm-linux-gcc... arm-none-linux-gnueabihf-gcc
checking whether the C compiler works... no
configure: error: in `/home/fgit/tslib':
configure: error: C compiler cannot create executables
See `config.log' for more details

this is config log:

This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.

It was created by tslib configure 1.10-rc1, which was
generated by GNU Autoconf 2.69.  Invocation command line was

  $ ./configure --host=arm-linux --prefix=/home/fgit/libts --enable-shared=yes --enable-static=no

## --------- ##
## Platform. ##
## --------- ##

hostname = ubuntu
uname -m = x86_64
uname -r = 4.4.0-31-generic
uname -s = Linux
uname -v = #50-Ubuntu SMP Wed Jul 13 00:07:12 UTC 2016

/usr/bin/uname -p = unknown
/bin/uname -X     = unknown

/bin/arch              = unknown
/usr/bin/arch -k       = unknown
/usr/convex/getsysinfo = unknown
/usr/bin/hostinfo      = unknown
/bin/machine           = unknown
/usr/bin/oslevel       = unknown
/bin/universe          = unknown

PATH: /opt/FriendlyARM/toolchain/4.9.3/bin
PATH: /home/fgit/bin
PATH: /home/fgit/.local/bin
PATH: /usr/local/sbin
PATH: /usr/local/bin
PATH: /usr/sbin
PATH: /usr/bin
PATH: /sbin
PATH: /bin
PATH: /usr/games
PATH: /usr/local/games
PATH: /snap/bin


## ----------- ##
## Core tests. ##
## ----------- ##

configure:2601: checking for a BSD-compatible install
configure:2669: result: /usr/bin/install -c
configure:2680: checking whether build environment is sane
configure:2735: result: yes
configure:2794: checking for arm-linux-strip
configure:2821: result: arm-none-linux-gnueabihf-strip
configure:2886: checking for a thread-safe mkdir -p
configure:2925: result: /bin/mkdir -p
configure:2932: checking for gawk
configure:2962: result: no
configure:2932: checking for mawk
configure:2948: found /usr/bin/mawk
configure:2959: result: mawk
configure:2970: checking whether make sets $(MAKE)
configure:2992: result: yes
configure:3021: checking whether make supports nested variables
configure:3038: result: yes
configure:3175: checking whether make supports nested variables
configure:3192: result: yes
configure:3223: checking build system type
configure:3237: result: x86_64-pc-linux-gnu
configure:3257: checking host system type
configure:3270: result: arm-unknown-linux-gnu
configure:3366: checking for arm-linux-gcc
configure:3393: result: arm-none-linux-gnueabihf-gcc
configure:3662: checking for C compiler version
configure:3671: arm-none-linux-gnueabihf-gcc --version >&5
arm-none-linux-gnueabihf-gcc (ctng-1.21.0-229g-FA) 4.9.3
Copyright (C) 2015 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.  There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

configure:3682: $? = 0
configure:3671: arm-none-linux-gnueabihf-gcc -v >&5
Using built-in specs.
COLLECT_GCC=arm-none-linux-gnueabihf-gcc
COLLECT_LTO_WRAPPER=/opt/FriendlyARM/toolchain/4.9.3/libexec/gcc/arm-cortexa9-linux-gnueabihf/4.9.3/lto-wrapper
Target: arm-cortexa9-linux-gnueabihf
Configured with: /work/toolchain/build/src/gcc-4.9.3/configure --build=x86_64-build_pc-linux-gnu --host=x86_64-build_pc-linux-gnu --target=arm-cortexa9-linux-gnueabihf --prefix=/opt/FriendlyARM/toolchain/4.9.3 --with-sysroot=/opt/FriendlyARM/toolchain/4.9.3/arm-cortexa9-linux-gnueabihf/sys-root --enable-languages=c,c++ --with-arch=armv7-a --with-tune=cortex-a9 --with-fpu=vfpv3 --with-float=hard --with-pkgversion=ctng-1.21.0-229g-FA --with-bugurl=http://www.friendlyarm.com/ --enable-__cxa_atexit --disable-libmudflap --disable-libgomp --disable-libssp --disable-libquadmath --disable-libquadmath-support --disable-libsanitizer --with-gmp=/work/toolchain/build/arm-cortexa9-linux-gnueabihf/buildtools --with-mpfr=/work/toolchain/build/arm-cortexa9-linux-gnueabihf/buildtools --with-mpc=/work/toolchain/build/arm-cortexa9-linux-gnueabihf/buildtools --with-isl=/work/toolchain/build/arm-cortexa9-linux-gnueabihf/buildtools --with-cloog=/work/toolchain/build/arm-cortexa9-linux-gnueabihf/buildtools --with-libelf=/work/toolchain/build/arm-cortexa9-linux-gnueabihf/buildtools --enable-lto --with-host-libstdcxx='-static-libgcc -Wl,-Bstatic,-lstdc++,-Bdynamic -lm' --enable-threads=posix --enable-linker-build-id --with-linker-hash-style=gnu --enable-plugin --enable-gold --disable-multilib --with-local-prefix=/opt/FriendlyARM/toolchain/4.9.3/arm-cortexa9-linux-gnueabihf/sys-root --enable-long-long
Thread model: posix
gcc version 4.9.3 (ctng-1.21.0-229g-FA) 
configure:3682: $? = 0
configure:3671: arm-none-linux-gnueabihf-gcc -V >&5
arm-none-linux-gnueabihf-gcc: error: unrecognized command line option '-V'
arm-none-linux-gnueabihf-gcc: fatal error: no input files
compilation terminated.
configure:3682: $? = 1
configure:3671: arm-none-linux-gnueabihf-gcc -qversion >&5
arm-none-linux-gnueabihf-gcc: error: unrecognized command line option '-qversion'
arm-none-linux-gnueabihf-gcc: fatal error: no input files
compilation terminated.
configure:3682: $? = 1
configure:3702: checking whether the C compiler works
configure:3724: arm-none-linux-gnueabihf-gcc -march=armv7l   conftest.c  >&5
arm-none-linux-gnueabihf-gcc: error: unrecognized argument in option '-march=armv7l'
arm-none-linux-gnueabihf-gcc: note: valid arguments to '-march=' are: armv2 armv2a armv3 armv3m armv4 armv4t armv5 armv5e armv5t armv5te armv6 armv6-m armv6j armv6k armv6s-m armv6t2 armv6z armv6zk armv7 armv7-a armv7-m armv7-r armv7e-m armv7ve armv8-a armv8-a+crc iwmmxt iwmmxt2 native
configure:3728: $? = 1
configure:3766: result: no
configure: failed program was:
| /* confdefs.h */
| #define PACKAGE_NAME "tslib"
| #define PACKAGE_TARNAME "tslib"
| #define PACKAGE_VERSION "1.10-rc1"
| #define PACKAGE_STRING "tslib 1.10-rc1"
| #define PACKAGE_BUGREPORT "tslib@lists.infradead.org"
| #define PACKAGE_URL "http://tslib.org"
| #define PACKAGE "tslib"
| #define VERSION "1.10-rc1"
| /* end confdefs.h.  */
| 
| int
| main ()
| {
| 
|   ;
|   return 0;
| }
configure:3771: error: in `/home/fgit/tslib':
configure:3773: error: C compiler cannot create executables
See `config.log' for more details

## ---------------- ##
## Cache variables. ##
## ---------------- ##

ac_cv_build=x86_64-pc-linux-gnu
ac_cv_env_CC_set=set
ac_cv_env_CC_value=arm-none-linux-gnueabihf-gcc
ac_cv_env_CFLAGS_set=set
ac_cv_env_CFLAGS_value=-march=armv7l
ac_cv_env_CPPFLAGS_set=
ac_cv_env_CPPFLAGS_value=
ac_cv_env_CPP_set=
ac_cv_env_CPP_value=
ac_cv_env_LDFLAGS_set=
ac_cv_env_LDFLAGS_value=
ac_cv_env_LIBS_set=
ac_cv_env_LIBS_value=
ac_cv_env_LT_SYS_LIBRARY_PATH_set=
ac_cv_env_LT_SYS_LIBRARY_PATH_value=
ac_cv_env_build_alias_set=
ac_cv_env_build_alias_value=
ac_cv_env_host_alias_set=set
ac_cv_env_host_alias_value=arm-linux
ac_cv_env_target_alias_set=
ac_cv_env_target_alias_value=
ac_cv_func_malloc_0_nonnull=yes
ac_cv_host=arm-unknown-linux-gnu
ac_cv_path_install='/usr/bin/install -c'
ac_cv_path_mkdir=/bin/mkdir
ac_cv_prog_AWK=mawk
ac_cv_prog_CC=arm-none-linux-gnueabihf-gcc
ac_cv_prog_STRIP=arm-none-linux-gnueabihf-strip
ac_cv_prog_make_make_set=yes
am_cv_make_support_nested_variables=yes

## ----------------- ##
## Output variables. ##
## ----------------- ##

ACLOCAL='${SHELL} /home/fgit/tslib/missing aclocal-1.15'
ALLOCA=''
AMDEPBACKSLASH=''
AMDEP_FALSE=''
AMDEP_TRUE=''
AMTAR='$${TAR-tar}'
AM_BACKSLASH='\'
AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)'
AM_DEFAULT_VERBOSITY='0'
AM_V='$(V)'
AR='arm-none-linux-gnueabihf-ar'
AUTOCONF='${SHELL} /home/fgit/tslib/missing autoconf'
AUTOHEADER='${SHELL} /home/fgit/tslib/missing autoheader'
AUTOMAKE='${SHELL} /home/fgit/tslib/missing automake-1.15'
AWK='mawk'
CC='arm-none-linux-gnueabihf-gcc'
CCDEPMODE=''
CFLAGS='-march=armv7l'
CPP=''
CPPFLAGS=''
CYGPATH_W='echo'
DEBUGFLAGS=''
DEFS=''
DEPDIR=''
DLLTOOL=''
DSYMUTIL=''
DUMPBIN=''
ECHO_C=''
ECHO_N='-n'
ECHO_T=''
EGREP=''
ENABLE_ARCTIC2_MODULE_FALSE=''
ENABLE_ARCTIC2_MODULE_TRUE=''
ENABLE_COLLIE_MODULE_FALSE=''
ENABLE_COLLIE_MODULE_TRUE=''
ENABLE_CORGI_MODULE_FALSE=''
ENABLE_CORGI_MODULE_TRUE=''
ENABLE_CY8MRLN_PALMPRE_MODULE_FALSE=''
ENABLE_CY8MRLN_PALMPRE_MODULE_TRUE=''
ENABLE_DEBOUNCE_MODULE_FALSE=''
ENABLE_DEBOUNCE_MODULE_TRUE=''
ENABLE_DEJITTER_MODULE_FALSE=''
ENABLE_DEJITTER_MODULE_TRUE=''
ENABLE_DMC_DUS3000_MODULE_FALSE=''
ENABLE_DMC_DUS3000_MODULE_TRUE=''
ENABLE_DMC_MODULE_FALSE=''
ENABLE_DMC_MODULE_TRUE=''
ENABLE_GALAX_MODULE_FALSE=''
ENABLE_GALAX_MODULE_TRUE=''
ENABLE_H3600_MODULE_FALSE=''
ENABLE_H3600_MODULE_TRUE=''
ENABLE_IIR_MODULE_FALSE=''
ENABLE_IIR_MODULE_TRUE=''
ENABLE_INPUT_MODULE_FALSE=''
ENABLE_INPUT_MODULE_TRUE=''
ENABLE_LINEAR_H2200_MODULE_FALSE=''
ENABLE_LINEAR_H2200_MODULE_TRUE=''
ENABLE_LINEAR_MODULE_FALSE=''
ENABLE_LINEAR_MODULE_TRUE=''
ENABLE_MEDIAN_MODULE_FALSE=''
ENABLE_MEDIAN_MODULE_TRUE=''
ENABLE_MK712_MODULE_FALSE=''
ENABLE_MK712_MODULE_TRUE=''
ENABLE_PTHRES_MODULE_FALSE=''
ENABLE_PTHRES_MODULE_TRUE=''
ENABLE_SKIP_MODULE_FALSE=''
ENABLE_SKIP_MODULE_TRUE=''
ENABLE_STATIC_ARCTIC2_MODULE_FALSE=''
ENABLE_STATIC_ARCTIC2_MODULE_TRUE=''
ENABLE_STATIC_COLLIE_MODULE_FALSE=''
ENABLE_STATIC_COLLIE_MODULE_TRUE=''
ENABLE_STATIC_CORGI_MODULE_FALSE=''
ENABLE_STATIC_CORGI_MODULE_TRUE=''
ENABLE_STATIC_CY8MRLN_PALMPRE_MODULE_FALSE=''
ENABLE_STATIC_CY8MRLN_PALMPRE_MODULE_TRUE=''
ENABLE_STATIC_DEBOUNCE_MODULE_FALSE=''
ENABLE_STATIC_DEBOUNCE_MODULE_TRUE=''
ENABLE_STATIC_DEJITTER_MODULE_FALSE=''
ENABLE_STATIC_DEJITTER_MODULE_TRUE=''
ENABLE_STATIC_DMC_DUS3000_MODULE_FALSE=''
ENABLE_STATIC_DMC_DUS3000_MODULE_TRUE=''
ENABLE_STATIC_DMC_MODULE_FALSE=''
ENABLE_STATIC_DMC_MODULE_TRUE=''
ENABLE_STATIC_GALAX_MODULE_FALSE=''
ENABLE_STATIC_GALAX_MODULE_TRUE=''
ENABLE_STATIC_H3600_MODULE_FALSE=''
ENABLE_STATIC_H3600_MODULE_TRUE=''
ENABLE_STATIC_IIR_MODULE_FALSE=''
ENABLE_STATIC_IIR_MODULE_TRUE=''
ENABLE_STATIC_INPUT_MODULE_FALSE=''
ENABLE_STATIC_INPUT_MODULE_TRUE=''
ENABLE_STATIC_LINEAR_H2200_MODULE_FALSE=''
ENABLE_STATIC_LINEAR_H2200_MODULE_TRUE=''
ENABLE_STATIC_LINEAR_MODULE_FALSE=''
ENABLE_STATIC_LINEAR_MODULE_TRUE=''
ENABLE_STATIC_MEDIAN_MODULE_FALSE=''
ENABLE_STATIC_MEDIAN_MODULE_TRUE=''
ENABLE_STATIC_MK712_MODULE_FALSE=''
ENABLE_STATIC_MK712_MODULE_TRUE=''
ENABLE_STATIC_PTHRES_MODULE_FALSE=''
ENABLE_STATIC_PTHRES_MODULE_TRUE=''
ENABLE_STATIC_SKIP_MODULE_FALSE=''
ENABLE_STATIC_SKIP_MODULE_TRUE=''
ENABLE_STATIC_TATUNG_MODULE_FALSE=''
ENABLE_STATIC_TATUNG_MODULE_TRUE=''
ENABLE_STATIC_TOUCHKIT_MODULE_FALSE=''
ENABLE_STATIC_TOUCHKIT_MODULE_TRUE=''
ENABLE_STATIC_UCB1X00_MODULE_FALSE=''
ENABLE_STATIC_UCB1X00_MODULE_TRUE=''
ENABLE_STATIC_VARIANCE_MODULE_FALSE=''
ENABLE_STATIC_VARIANCE_MODULE_TRUE=''
ENABLE_STATIC_WAVESHARE_MODULE_FALSE=''
ENABLE_STATIC_WAVESHARE_MODULE_TRUE=''
ENABLE_TATUNG_MODULE_FALSE=''
ENABLE_TATUNG_MODULE_TRUE=''
ENABLE_TOOLS_FALSE=''
ENABLE_TOOLS_TRUE=''
ENABLE_TOUCHKIT_MODULE_FALSE=''
ENABLE_TOUCHKIT_MODULE_TRUE=''
ENABLE_UCB1X00_MODULE_FALSE=''
ENABLE_UCB1X00_MODULE_TRUE=''
ENABLE_VARIANCE_MODULE_FALSE=''
ENABLE_VARIANCE_MODULE_TRUE=''
ENABLE_WAVESHARE_MODULE_FALSE=''
ENABLE_WAVESHARE_MODULE_TRUE=''
EXEEXT=''
FGREP=''
FREEBSD_FALSE=''
FREEBSD_TRUE='#'
GREP=''
HAIKU_FALSE=''
HAIKU_TRUE='#'
HAVE_STRSEP_FALSE=''
HAVE_STRSEP_TRUE=''
HURD_FALSE=''
HURD_TRUE='#'
INSTALL_DATA='${INSTALL} -m 644'
INSTALL_PROGRAM='${INSTALL}'
INSTALL_SCRIPT='${INSTALL}'
INSTALL_STRIP_PROGRAM='$(install_sh) -c -s'
LD='arm-none-linux-gnueabihf-ld'
LDFLAGS=''
LIBFLAGS=''
LIBOBJS=''
LIBS=''
LIBTOOL=''
LIBTS_VERSION_AGE=''
LIBTS_VERSION_CURRENT=''
LIBTS_VERSION_REVISION=''
LINUX_FALSE='#'
LINUX_TRUE=''
LIPO=''
LN_S=''
LTLIBOBJS=''
LT_AGE=''
LT_CURRENT=''
LT_REVISION=''
LT_SYS_LIBRARY_PATH=''
MAKEINFO='${SHELL} /home/fgit/tslib/missing makeinfo'
MANIFEST_TOOL=''
MKDIR_P='/bin/mkdir -p'
NM=''
NMEDIT=''
OBJDUMP=''
OBJEXT=''
OTOOL64=''
OTOOL=''
PACKAGE='tslib'
PACKAGE_BUGREPORT='tslib@lists.infradead.org'
PACKAGE_DESCRIPTION='Touchscreen Access Library'
PACKAGE_NAME='tslib'
PACKAGE_STRING='tslib 1.10-rc1'
PACKAGE_TARNAME='tslib'
PACKAGE_URL='http://tslib.org'
PACKAGE_VERSION='1.10-rc1'
PATH_SEPARATOR=':'
PLUGIN_DIR=''
RANLIB='arm-none-linux-gnueabihf-ranlib'
SED=''
SET_MAKE=''
SHELL='/bin/bash'
STRIP='arm-none-linux-gnueabihf-strip'
TS_CONF=''
TS_POINTERCAL=''
VERSION='1.10-rc1'
VIS_CFLAGS=''
WINDOWS_FALSE=''
WINDOWS_TRUE='#'
ac_ct_AR=''
ac_ct_CC=''
ac_ct_DUMPBIN=''
am__EXEEXT_FALSE=''
am__EXEEXT_TRUE=''
am__fastdepCC_FALSE=''
am__fastdepCC_TRUE=''
am__include=''
am__isrc=''
am__leading_dot='.'
am__nodep=''
am__quote=''
am__tar='$${TAR-tar} chof - "$$tardir"'
am__untar='$${TAR-tar} xf -'
bindir='${exec_prefix}/bin'
build='x86_64-pc-linux-gnu'
build_alias=''
build_cpu='x86_64'
build_os='linux-gnu'
build_vendor='pc'
datadir='${datarootdir}'
datarootdir='${prefix}/share'
docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
dvidir='${docdir}'
exec_prefix='NONE'
host='arm-unknown-linux-gnu'
host_alias='arm-linux'
host_cpu='arm'
host_os='linux-gnu'
host_vendor='unknown'
htmldir='${docdir}'
includedir='${prefix}/include'
infodir='${datarootdir}/info'
install_sh='${SHELL} /home/fgit/tslib/install-sh'
libdir='${exec_prefix}/lib'
libexecdir='${exec_prefix}/libexec'
localedir='${datarootdir}/locale'
localstatedir='${prefix}/var'
mandir='${datarootdir}/man'
mkdir_p='$(MKDIR_P)'
oldincludedir='/usr/include'
pdfdir='${docdir}'
prefix='/home/fgit/libts'
program_transform_name='s,x,x,'
psdir='${docdir}'
runstatedir='${localstatedir}/run'
sbindir='${exec_prefix}/sbin'
sharedstatedir='${prefix}/com'
sysconfdir='${prefix}/etc'
target_alias=''

## ----------- ##
## confdefs.h. ##
## ----------- ##

/* confdefs.h */
#define PACKAGE_NAME "tslib"
#define PACKAGE_TARNAME "tslib"
#define PACKAGE_VERSION "1.10-rc1"
#define PACKAGE_STRING "tslib 1.10-rc1"
#define PACKAGE_BUGREPORT "tslib@lists.infradead.org"
#define PACKAGE_URL "http://tslib.org"
#define PACKAGE "tslib"
#define VERSION "1.10-rc1"

configure: exit 77

but when write sudo command all of them (./configure,make and make install) run with no error.
I copy all from first to home directory and does not use any root directory but those command does not allow me to install without sudo command.

@jsulm thanks for reply, this is my output and I dont see any error :

it@ubuntu:~/tslib$ sudo make install 
Making install in etc
make[1]: Entering directory '/home/fgit/tslib/etc'
make[2]: Entering directory '/home/fgit/tslib/etc'
 /bin/mkdir -p '/home/fgit/libts/etc'
 /usr/bin/install -c -m 644 ts.conf '/home/fgit/libts/etc'
make[2]: Nothing to be done for 'install-data-am'.
make[2]: Leaving directory '/home/fgit/tslib/etc'
make[1]: Leaving directory '/home/fgit/tslib/etc'
Making install in src
make[1]: Entering directory '/home/fgit/tslib/src'
  CC       ts_attach.lo
  CC       ts_close.lo
  CC       ts_config.lo
  CC       ts_error.lo
  CC       ts_fd.lo
  CC       ts_load_module.lo
  CC       ts_open.lo
  CC       ts_parse_vars.lo
  CC       ts_read.lo
  CC       ts_read_raw.lo
  CC       ts_option.lo
  CC       ts_setup.lo
  CC       ts_version.lo
  CC       ts_strsep.lo
  CCLD     libts.la
make[2]: Entering directory '/home/fgit/tslib/src'
 /bin/mkdir -p '/home/fgit/libts/lib'
 /bin/bash ../libtool   --mode=install /usr/bin/install -c   libts.la '/home/fgit/libts/lib'
libtool: install: /usr/bin/install -c .libs/libts.so.0.7.0 /home/fgit/libts/lib/libts.so.0.7.0
libtool: install: (cd /home/fgit/libts/lib && { ln -s -f libts.so.0.7.0 libts.so.0 || { rm -f libts.so.0 && ln -s libts.so.0.7.0 libts.so.0; }; })
libtool: install: (cd /home/fgit/libts/lib && { ln -s -f libts.so.0.7.0 libts.so || { rm -f libts.so && ln -s libts.so.0.7.0 libts.so; }; })
libtool: install: /usr/bin/install -c .libs/libts.lai /home/fgit/libts/lib/libts.la
libtool: finish: PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin" ldconfig -n /home/fgit/libts/lib
----------------------------------------------------------------------
Libraries have been installed in:
   /home/fgit/libts/lib

If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the '-LLIBDIR'
flag during linking and do at least one of the following:
   - add LIBDIR to the 'LD_LIBRARY_PATH' environment variable
     during execution
   - add LIBDIR to the 'LD_RUN_PATH' environment variable
     during linking
   - use the '-Wl,-rpath -Wl,LIBDIR' linker flag
   - have your system administrator add LIBDIR to '/etc/ld.so.conf'

See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
 /bin/mkdir -p '/home/fgit/libts/include'
 /usr/bin/install -c -m 644 tslib.h '/home/fgit/libts/include'
make[2]: Leaving directory '/home/fgit/tslib/src'
make[1]: Leaving directory '/home/fgit/tslib/src'
Making install in plugins
make[1]: Entering directory '/home/fgit/tslib/plugins'
  CC       linear.lo
  CCLD     linear.la
  CC       dejitter.lo
  CCLD     dejitter.la
  CC       variance.lo
  CCLD     variance.la
  CC       median.lo
  CCLD     median.la
  CC       pthres.lo
  CCLD     pthres.la
  CC       debounce.lo
  CCLD     debounce.la
  CC       skip.lo
  CCLD     skip.la
  CC       iir.lo
  CCLD     iir.la
  CC       ucb1x00-raw.lo
  CCLD     ucb1x00.la
  CC       corgi-raw.lo
  CCLD     corgi.la
  CC       collie-raw.lo
  CCLD     collie.la
  CC       h3600-raw.lo
  CCLD     h3600.la
  CC       mk712-raw.lo
  CCLD     mk712.la
  CC       arctic2-raw.lo
  CCLD     arctic2.la
  CC       tatung-raw.lo
  CCLD     tatung.la
  CC       dmc-raw.lo
  CCLD     dmc.la
  CC       linear-h2200.lo
  CCLD     linear_h2200.la
  CC       input-raw.lo
  CCLD     input.la
  CC       galax-raw.lo
  CCLD     galax.la
  CC       touchkit-raw.lo
  CCLD     touchkit.la
  CC       waveshare-raw.lo
  CCLD     waveshare.la
make[2]: Entering directory '/home/fgit/tslib/plugins'
 /bin/mkdir -p '/home/fgit/libts/lib/ts'
 /bin/bash ../libtool   --mode=install /usr/bin/install -c   linear.la dejitter.la variance.la median.la pthres.la debounce.la skip.la iir.la ucb1x00.la corgi.la collie.la h3600.la mk712.la arctic2.la tatung.la dmc.la linear_h2200.la input.la galax.la touchkit.la waveshare.la '/home/fgit/libts/lib/ts'
libtool: warning: relinking 'linear.la'
libtool: install: (cd /home/fgit/tslib/plugins; /bin/bash "/home/fgit/tslib/libtool"  --silent --tag CC --mode=relink gcc -DTS_POINTERCAL=\"/home/fgit/libts/etc/pointercal\" -DTSLIB_INTERNAL -fvisibility=hidden -DGCC_HASCLASSVISIBILITY -O2 -Wall -W -fPIC -module -avoid-version -o linear.la -rpath /home/fgit/libts/lib/ts linear.lo ../src/libts.la )
libtool: install: /usr/bin/install -c .libs/linear.soT /home/fgit/libts/lib/ts/linear.so
libtool: install: /usr/bin/install -c .libs/linear.lai /home/fgit/libts/lib/ts/linear.la
libtool: warning: relinking 'dejitter.la'
libtool: install: (cd /home/fgit/tslib/plugins; /bin/bash "/home/fgit/tslib/libtool"  --silent --tag CC --mode=relink gcc -DTS_POINTERCAL=\"/home/fgit/libts/etc/pointercal\" -DTSLIB_INTERNAL -fvisibility=hidden -DGCC_HASCLASSVISIBILITY -O2 -Wall -W -fPIC -module -avoid-version -o dejitter.la -rpath /home/fgit/libts/lib/ts dejitter.lo ../src/libts.la )
libtool: install: /usr/bin/install -c .libs/dejitter.soT /home/fgit/libts/lib/ts/dejitter.so
libtool: install: /usr/bin/install -c .libs/dejitter.lai /home/fgit/libts/lib/ts/dejitter.la
libtool: warning: relinking 'variance.la'
libtool: install: (cd /home/fgit/tslib/plugins; /bin/bash "/home/fgit/tslib/libtool"  --silent --tag CC --mode=relink gcc -DTS_POINTERCAL=\"/home/fgit/libts/etc/pointercal\" -DTSLIB_INTERNAL -fvisibility=hidden -DGCC_HASCLASSVISIBILITY -O2 -Wall -W -fPIC -module -avoid-version -o variance.la -rpath /home/fgit/libts/lib/ts variance.lo ../src/libts.la )
libtool: install: /usr/bin/install -c .libs/variance.soT /home/fgit/libts/lib/ts/variance.so
libtool: install: /usr/bin/install -c .libs/variance.lai /home/fgit/libts/lib/ts/variance.la
libtool: warning: relinking 'median.la'
libtool: install: (cd /home/fgit/tslib/plugins; /bin/bash "/home/fgit/tslib/libtool"  --silent --tag CC --mode=relink gcc -DTS_POINTERCAL=\"/home/fgit/libts/etc/pointercal\" -DTSLIB_INTERNAL -fvisibility=hidden -DGCC_HASCLASSVISIBILITY -O2 -Wall -W -fPIC -module -avoid-version -o median.la -rpath /home/fgit/libts/lib/ts median.lo ../src/libts.la )
libtool: install: /usr/bin/install -c .libs/median.soT /home/fgit/libts/lib/ts/median.so
libtool: install: /usr/bin/install -c .libs/median.lai /home/fgit/libts/lib/ts/median.la
libtool: warning: relinking 'pthres.la'
libtool: install: (cd /home/fgit/tslib/plugins; /bin/bash "/home/fgit/tslib/libtool"  --silent --tag CC --mode=relink gcc -DTS_POINTERCAL=\"/home/fgit/libts/etc/pointercal\" -DTSLIB_INTERNAL -fvisibility=hidden -DGCC_HASCLASSVISIBILITY -O2 -Wall -W -fPIC -module -avoid-version -o pthres.la -rpath /home/fgit/libts/lib/ts pthres.lo ../src/libts.la )
libtool: install: /usr/bin/install -c .libs/pthres.soT /home/fgit/libts/lib/ts/pthres.so
libtool: install: /usr/bin/install -c .libs/pthres.lai /home/fgit/libts/lib/ts/pthres.la
libtool: warning: relinking 'debounce.la'
libtool: install: (cd /home/fgit/tslib/plugins; /bin/bash "/home/fgit/tslib/libtool"  --silent --tag CC --mode=relink gcc -DTS_POINTERCAL=\"/home/fgit/libts/etc/pointercal\" -DTSLIB_INTERNAL -fvisibility=hidden -DGCC_HASCLASSVISIBILITY -O2 -Wall -W -fPIC -module -avoid-version -o debounce.la -rpath /home/fgit/libts/lib/ts debounce.lo ../src/libts.la )
libtool: install: /usr/bin/install -c .libs/debounce.soT /home/fgit/libts/lib/ts/debounce.so
libtool: install: /usr/bin/install -c .libs/debounce.lai /home/fgit/libts/lib/ts/debounce.la
libtool: warning: relinking 'skip.la'
libtool: install: (cd /home/fgit/tslib/plugins; /bin/bash "/home/fgit/tslib/libtool"  --silent --tag CC --mode=relink gcc -DTS_POINTERCAL=\"/home/fgit/libts/etc/pointercal\" -DTSLIB_INTERNAL -fvisibility=hidden -DGCC_HASCLASSVISIBILITY -O2 -Wall -W -fPIC -module -avoid-version -o skip.la -rpath /home/fgit/libts/lib/ts skip.lo ../src/libts.la )
libtool: install: /usr/bin/install -c .libs/skip.soT /home/fgit/libts/lib/ts/skip.so
libtool: install: /usr/bin/install -c .libs/skip.lai /home/fgit/libts/lib/ts/skip.la
libtool: warning: relinking 'iir.la'
libtool: install: (cd /home/fgit/tslib/plugins; /bin/bash "/home/fgit/tslib/libtool"  --silent --tag CC --mode=relink gcc -DTS_POINTERCAL=\"/home/fgit/libts/etc/pointercal\" -DTSLIB_INTERNAL -fvisibility=hidden -DGCC_HASCLASSVISIBILITY -O2 -Wall -W -fPIC -module -avoid-version -o iir.la -rpath /home/fgit/libts/lib/ts iir.lo ../src/libts.la )
libtool: install: /usr/bin/install -c .libs/iir.soT /home/fgit/libts/lib/ts/iir.so
libtool: install: /usr/bin/install -c .libs/iir.lai /home/fgit/libts/lib/ts/iir.la
libtool: install: /usr/bin/install -c .libs/ucb1x00.so /home/fgit/libts/lib/ts/ucb1x00.so
libtool: install: /usr/bin/install -c .libs/ucb1x00.lai /home/fgit/libts/lib/ts/ucb1x00.la
libtool: install: /usr/bin/install -c .libs/corgi.so /home/fgit/libts/lib/ts/corgi.so
libtool: install: /usr/bin/install -c .libs/corgi.lai /home/fgit/libts/lib/ts/corgi.la
libtool: install: /usr/bin/install -c .libs/collie.so /home/fgit/libts/lib/ts/collie.so
libtool: install: /usr/bin/install -c .libs/collie.lai /home/fgit/libts/lib/ts/collie.la
libtool: install: /usr/bin/install -c .libs/h3600.so /home/fgit/libts/lib/ts/h3600.so
libtool: install: /usr/bin/install -c .libs/h3600.lai /home/fgit/libts/lib/ts/h3600.la
libtool: install: /usr/bin/install -c .libs/mk712.so /home/fgit/libts/lib/ts/mk712.so
libtool: install: /usr/bin/install -c .libs/mk712.lai /home/fgit/libts/lib/ts/mk712.la
libtool: install: /usr/bin/install -c .libs/arctic2.so /home/fgit/libts/lib/ts/arctic2.so
libtool: install: /usr/bin/install -c .libs/arctic2.lai /home/fgit/libts/lib/ts/arctic2.la
libtool: install: /usr/bin/install -c .libs/tatung.so /home/fgit/libts/lib/ts/tatung.so
libtool: install: /usr/bin/install -c .libs/tatung.lai /home/fgit/libts/lib/ts/tatung.la
libtool: install: /usr/bin/install -c .libs/dmc.so /home/fgit/libts/lib/ts/dmc.so
libtool: install: /usr/bin/install -c .libs/dmc.lai /home/fgit/libts/lib/ts/dmc.la
libtool: warning: relinking 'linear_h2200.la'
libtool: install: (cd /home/fgit/tslib/plugins; /bin/bash "/home/fgit/tslib/libtool"  --silent --tag CC --mode=relink gcc -DTS_POINTERCAL=\"/home/fgit/libts/etc/pointercal\" -DTSLIB_INTERNAL -fvisibility=hidden -DGCC_HASCLASSVISIBILITY -O2 -Wall -W -fPIC -module -avoid-version -o linear_h2200.la -rpath /home/fgit/libts/lib/ts linear-h2200.lo ../src/libts.la )
libtool: install: /usr/bin/install -c .libs/linear_h2200.soT /home/fgit/libts/lib/ts/linear_h2200.so
libtool: install: /usr/bin/install -c .libs/linear_h2200.lai /home/fgit/libts/lib/ts/linear_h2200.la
libtool: warning: relinking 'input.la'
libtool: install: (cd /home/fgit/tslib/plugins; /bin/bash "/home/fgit/tslib/libtool"  --silent --tag CC --mode=relink gcc -DTS_POINTERCAL=\"/home/fgit/libts/etc/pointercal\" -DTSLIB_INTERNAL -fvisibility=hidden -DGCC_HASCLASSVISIBILITY -O2 -Wall -W -fPIC -module -avoid-version -o input.la -rpath /home/fgit/libts/lib/ts input-raw.lo ../src/libts.la )
libtool: install: /usr/bin/install -c .libs/input.soT /home/fgit/libts/lib/ts/input.so
libtool: install: /usr/bin/install -c .libs/input.lai /home/fgit/libts/lib/ts/input.la
libtool: warning: relinking 'galax.la'
libtool: install: (cd /home/fgit/tslib/plugins; /bin/bash "/home/fgit/tslib/libtool"  --silent --tag CC --mode=relink gcc -DTS_POINTERCAL=\"/home/fgit/libts/etc/pointercal\" -DTSLIB_INTERNAL -fvisibility=hidden -DGCC_HASCLASSVISIBILITY -O2 -Wall -W -fPIC -module -avoid-version -o galax.la -rpath /home/fgit/libts/lib/ts galax-raw.lo ../src/libts.la )
libtool: install: /usr/bin/install -c .libs/galax.soT /home/fgit/libts/lib/ts/galax.so
libtool: install: /usr/bin/install -c .libs/galax.lai /home/fgit/libts/lib/ts/galax.la
libtool: install: /usr/bin/install -c .libs/touchkit.so /home/fgit/libts/lib/ts/touchkit.so
libtool: install: /usr/bin/install -c .libs/touchkit.lai /home/fgit/libts/lib/ts/touchkit.la
libtool: warning: relinking 'waveshare.la'
libtool: install: (cd /home/fgit/tslib/plugins; /bin/bash "/home/fgit/tslib/libtool"  --silent --tag CC --mode=relink gcc -DTS_POINTERCAL=\"/home/fgit/libts/etc/pointercal\" -DTSLIB_INTERNAL -fvisibility=hidden -DGCC_HASCLASSVISIBILITY -O2 -Wall -W -fPIC -module -avoid-version -o waveshare.la -rpath /home/fgit/libts/lib/ts waveshare-raw.lo ../src/libts.la )
libtool: install: /usr/bin/install -c .libs/waveshare.soT /home/fgit/libts/lib/ts/waveshare.so
libtool: install: /usr/bin/install -c .libs/waveshare.lai /home/fgit/libts/lib/ts/waveshare.la
libtool: finish: PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin" ldconfig -n /home/fgit/libts/lib/ts
----------------------------------------------------------------------
Libraries have been installed in:
   /home/fgit/libts/lib/ts

If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the '-LLIBDIR'
flag during linking and do at least one of the following:
   - add LIBDIR to the 'LD_LIBRARY_PATH' environment variable
     during execution
   - add LIBDIR to the 'LD_RUN_PATH' environment variable
     during linking
   - use the '-Wl,-rpath -Wl,LIBDIR' linker flag
   - have your system administrator add LIBDIR to '/etc/ld.so.conf'

See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
make[2]: Nothing to be done for 'install-data-am'.
make[2]: Leaving directory '/home/fgit/tslib/plugins'
make[1]: Leaving directory '/home/fgit/tslib/plugins'
Making install in tests
make[1]: Entering directory '/home/fgit/tslib/tests'
  CC       ts_test.o
  CC       testutils.o
  CC       font_8x8.o
  CC       font_8x16.o
  CC       fbutils-linux.o
  CCLD     ts_test
  CC       ts_test_mt.o
  CCLD     ts_test_mt
  CC       ts_calibrate.o
  CCLD     ts_calibrate
  CC       ts_print.o
  CCLD     ts_print
  CC       ts_print_mt.o
  CCLD     ts_print_mt
  CC       ts_print_raw.o
  CCLD     ts_print_raw
  CC       ts_harvest.o
  CCLD     ts_harvest
  CC       ts_finddev.o
  CCLD     ts_finddev
  CC       ts_verify.o
  CCLD     ts_verify
make[2]: Entering directory '/home/fgit/tslib/tests'
 /bin/mkdir -p '/home/fgit/libts/bin'
  /bin/bash ../libtool   --mode=install /usr/bin/install -c ts_test ts_test_mt ts_calibrate ts_print ts_print_mt ts_print_raw ts_harvest ts_finddev ts_verify '/home/fgit/libts/bin'
libtool: install: /usr/bin/install -c .libs/ts_test /home/fgit/libts/bin/ts_test
libtool: install: /usr/bin/install -c .libs/ts_test_mt /home/fgit/libts/bin/ts_test_mt
libtool: install: /usr/bin/install -c .libs/ts_calibrate /home/fgit/libts/bin/ts_calibrate
libtool: install: /usr/bin/install -c .libs/ts_print /home/fgit/libts/bin/ts_print
libtool: install: /usr/bin/install -c .libs/ts_print_mt /home/fgit/libts/bin/ts_print_mt
libtool: install: /usr/bin/install -c .libs/ts_print_raw /home/fgit/libts/bin/ts_print_raw
libtool: install: /usr/bin/install -c .libs/ts_harvest /home/fgit/libts/bin/ts_harvest
libtool: install: /usr/bin/install -c .libs/ts_finddev /home/fgit/libts/bin/ts_finddev
libtool: install: /usr/bin/install -c .libs/ts_verify /home/fgit/libts/bin/ts_verify
make[2]: Nothing to be done for 'install-data-am'.
make[2]: Leaving directory '/home/fgit/tslib/tests'
make[1]: Leaving directory '/home/fgit/tslib/tests'
Making install in tools
make[1]: Entering directory '/home/fgit/tslib/tools'
  CC       ts_uinput.o
  CCLD     ts_uinput
make[2]: Entering directory '/home/fgit/tslib/tools'
 /bin/mkdir -p '/home/fgit/libts/bin'
  /bin/bash ../libtool   --mode=install /usr/bin/install -c ts_uinput '/home/fgit/libts/bin'
libtool: install: /usr/bin/install -c .libs/ts_uinput /home/fgit/libts/bin/ts_uinput
make[2]: Nothing to be done for 'install-data-am'.
make[2]: Leaving directory '/home/fgit/tslib/tools'
make[1]: Leaving directory '/home/fgit/tslib/tools'
Making install in doc
make[1]: Entering directory '/home/fgit/tslib/doc'
make[2]: Entering directory '/home/fgit/tslib/doc'
make[2]: Nothing to be done for 'install-exec-am'.
 /bin/mkdir -p '/home/fgit/libts/share/man/man1'
 /usr/bin/install -c -m 644 ts_test.1 ts_test_mt.1 ts_calibrate.1 ts_uinput.1 ts_print.1 ts_print_raw.1 ts_print_mt.1 ts_finddev.1 ts_harvest.1 ts_verify.1 '/home/fgit/libts/share/man/man1'
 /bin/mkdir -p '/home/fgit/libts/share/man/man3'
 /usr/bin/install -c -m 644 ts_read.3 ts_read_mt.3 ts_read_raw.3 ts_read_raw_mt.3 ts_open.3 ts_close.3 ts_config.3 ts_setup.3 ts_libversion.3 '/home/fgit/libts/share/man/man3'
 /bin/mkdir -p '/home/fgit/libts/share/man/man5'
 /usr/bin/install -c -m 644 ts.conf.5 '/home/fgit/libts/share/man/man5'
make[2]: Leaving directory '/home/fgit/tslib/doc'
make[1]: Leaving directory '/home/fgit/tslib/doc'
make[1]: Entering directory '/home/fgit/tslib'
make[2]: Entering directory '/home/fgit/tslib'
make[2]: Nothing to be done for 'install-exec-am'.
 /bin/mkdir -p '/home/fgit/libts/lib/pkgconfig'
 /usr/bin/install -c -m 644 tslib.pc '/home/fgit/libts/lib/pkgconfig'
make[2]: Leaving directory '/home/fgit/tslib'
make[1]: Leaving directory '/home/fgit/tslib'

jsulm

@MhM93 said in my cross compiler has error.tslib install but has error:

/home/fgit/libts/lib/libts.so.0.7.0
this is the lib (look for "libtool: install: /usr/bin/install -c .libs/libts.so.0.7.0 /home/fgit/libts/lib/libts.so.0.7.0" in the install log). So, you need to add /home/fgit/libts/lib/ to your pro file:

LIBS += -L/home/fgit/libts/lib -ltslib

When building in home directory there is no need for sudo when calling configure. Why do you think you need sudo?

MhM93

when I did not use sudo this error display:

fgit@ubuntu:~/tslib$ ./configure --host=arm-linux --prefix=/home/fgit/libts --enable-

shared=yes --enable-static=no
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for arm-linux-strip... arm-none-linux-gnueabihf-strip
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking whether make supports nested variables... (cached) yes
checking build system type... x86_64-pc-linux-gnu
checking host system type... arm-unknown-linux-gnu
checking for arm-linux-gcc... arm-none-linux-gnueabihf-gcc
checking whether the C compiler works... no
configure: error: in `/home/fgit/tslib':
configure: error: C compiler cannot create executables
See `config.log' for more details

I dont know why?
I use that lib in my .pro file

######################################################################
# Automatically generated by qmake (2.01a) Wed May 10 21:39:17 2017
######################################################################

TEMPLATE = app
TARGET = 
DEPENDPATH += .
INCLUDEPATH += .
LIBS += -L/home/fgit/libts/lib -ltslib
# Input
SOURCES += main.cpp

this error

git@ubuntu:~/helloqt$ make
arm-linux-g++ -Wl,-rpath-link,/tmp/FriendlyARM/nanopi2/libs/usr/lib -Wl,-O1 -Wl,-rpath,/usr/local/Trolltech/QtEmbedded-4.8.6-arm/lib -o helloqt main.o    -L/tmp/FriendlyARM/nanopi2/libs/usr/lib -L/usr/local/Trolltech/QtEmbedded-4.8.6-arm/lib -L/home/fgit/libts/lib -ltslib -lQtGui -L/usr/local/Trolltech/QtEmbedded-4.8.6-arm/lib -L/tmp/FriendlyARM/nanopi2/libs/usr/lib -lQtNetwork -lQtCore -lpthread 
/opt/FriendlyARM/toolchain/4.9.3/lib/gcc/arm-cortexa9-linux-gnueabihf/4.9.3/../../../../arm-cortexa9-linux-gnueabihf/bin/ld.bfd: cannot find -ltslib
collect2: error: ld returned 1 exit status
Makefile:103: recipe for target 'helloqt' failed
make: *** [helloqt] Error 1

I change .pro to this and this is the error:

######################################################################
# Automatically generated by qmake (2.01a) Wed May 10 21:39:17 2017
######################################################################

TEMPLATE = app
TARGET = 
DEPENDPATH += .
INCLUDEPATH += .
LIBS += -L/home/fgit/libts/lib -lts
# Input
SOURCES += main.cpp

SGaist

Then there's something messed up with your cross-compiler installation. You shouldn't need to be root to cross-compile.

First thing ensure that you are doing that from a clean state. Then check the complete log as to why the configure script can't use the cross-compiler properly.

jsulm

@MhM93 said in my cross compiler has error.tslib install but has error:

I change .pro to this and this is the error:

What is the error?
Did you rerun qmake after changing the pro file?

MhM93

@jsulm :yes, I change .pro and and run qmake and then make command. the error is in the picture
@SGaist I want to run another new ubuntu to install of them from the first. all of the things need /usr/ directory should come with sudo command. so my compiler install with sudo command. I decide to do all steps again with new ubuntu. (this is my 3rd ubuntu :D ) I wish I can

jsulm

@MhM93 Picture sharing does not work here. Please post the error text.

"all of the things need /usr/ directory" - why do you want to have the stuff in /usr?

MhM93

git@ubuntu:~/helloqt$ make
arm-linux-g++ -Wl,-rpath-link,/tmp/FriendlyARM/nanopi2/libs/usr/lib -Wl,-O1 -Wl,-rpath,/usr/local/Trolltech/QtEmbedded-4.8.6-arm/lib -o helloqt main.o    -L/tmp/FriendlyARM/nanopi2/libs/usr/lib -L/usr/local/Trolltech/QtEmbedded-4.8.6-arm/lib -L/home/fgit/libts/lib -ltslib -lQtGui -L/usr/local/Trolltech/QtEmbedded-4.8.6-arm/lib -L/tmp/FriendlyARM/nanopi2/libs/usr/lib -lQtNetwork -lQtCore -lpthread 
/home/fgit/libts/libts.so:file not recognized:File format not recognized
collect2: error: ld returned 1 exit status
Makefile:103: recipe for target 'helloqt' failed
make: *** [helloqt] Error 1

that is the error. when I extract the zip file they placed in /usr/local/ directory. I can not change the directory. This toolchain is https://www.mediafire.com/folder/ilkcy37otd7il/NanoPi2Board#a0l72ygtz0797 that I download and install it

SGaist

What does file libts.so return ?

MhM93

fgit@ubuntu:~$ file ~/libts/lib/libts.so
/home/fgit/libts/lib/libts.so: symbolic link to libts.so.0.7.0
fgit@ubuntu:~$ file ~/libts/lib/libts.so.0.7.0 
/home/fgit/libts/lib/libts.so.0.7.0: ELF 64-bit LSB shared object, x86-64, version 1 (SYSV), dynamically linked, BuildID[sha1]=a6de3ac1d75c3420a9ecfb7bd34a42bda7524169, not stripped
fgit@ubuntu:~$

jsulm

@MhM93 You built it for X86 not for ARM...

MhM93

but I do this with my compiler path

export PATH=/usr/local/arm/4.7.0/bin:$PATH
export CROSS_COMPILE=arm-none-linux-gnueabi-
export CC=${CROSS_COMPILE}gcc
export CFLAGS=-march=armv7l
export CXX=${CROSS_COMPILE}"g++" 
export AR=${CROSS_COMPILE}"ar" 
export AS=${CROSS_COMPILE}"as"
export RANLIB=${CROSS_COMPILE}"ranlib"
export LD=${CROSS_COMPILE}"ld"
export STRIP=${CROSS_COMPILE}"strip"
export ac_cv_func_malloc_0_nonnull=yes

SGaist

Check the configure script options. There's something like --host=arm-none-linux-gnueabi IIRC.

MhM93

really thanksssssssssssssssssssssssssss
It compile without error with this command, at last.

sudo ./configure --host=arm-none-linux-gnueabihf --prefix=/home/tslib --enable-shared=yes --enable-static=no

but when I copy the exe file to my arm device it again show me this error:

root@NanoPC-T2:/# tftp 192.168.101.4
tftp> get helloqt
Received 11692 bytes in 0.4 seconds
tftp> quit
root@NanoPC-T2:/# . setqt4env
ctp = 1
root@NanoPC-T2:/# chmod +x helloqt
root@NanoPC-T2:/# ./helloqt -qws &
[1] 1409
root@NanoPC-T2:/# ./helloqt -qws
[1]+  Segmentation fault      ./helloqt -qws
Segmentation fault
root@NanoPC-T2:/# ldd ./helloqt
        not a dynamic executable
root@NanoPC-T2:/# file ./helloqt
./helloqt: ERROR: ELF 32-bit LSB executable, ARM, EABI5 version 1 (SYSV), dynamically linked, interpreter /lib/ld-linux-armhf.so.3 error reading (Invalid argument)

jsulm

@MhM93 said in my cross compiler has error.tslib install but has error:

[1]+ Segmentation fault ./helloqt -qws

This is another problem. Try to start your app in a debugger to see what happens.
Also why do you start it twice:

root@NanoPC-T2:/# ./helloqt -qws &
[1] 1409
root@NanoPC-T2:/# ./helloqt -qws

?

MhM93

I do not install qt creator to see debug mood in my pc, and also this program is run on nanopc-t2 when I wrote this command it returns :

root@NanoPC-T2:/# strace ./helloqt
execve("./helloqt", ["./helloqt"], [/* 20 vars */]) = 0
brk(NULL)                               = 0x21000
uname({sysname="Linux", nodename="NanoPC-T2", ...}) = 0
access("/etc/ld.so.nohwcap", F_OK)      = -1 ENOENT (No such file or directory)
mmap2(NULL, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb6f67000
access("/etc/ld.so.preload", R_OK)      = -1 ENOENT (No such file or directory)
--- SIGSEGV {si_signo=SIGSEGV, si_code=SEGV_MAPERR, si_addr=0x4} ---
+++ killed by SIGSEGV +++
Segmentation fault

Also why do you start it twice:
with silly reason. I just test what happen to run command with & and without it. :)

Solved my cross compiler has error.tslib install but has error