my cross compiler has error.tslib install but has error
Solved
Qt Creator and other tools
-
###################################################################### # Automatically generated by qmake (2.01a) Mon May 8 00:23:37 2017 ###################################################################### TEMPLATE = app TARGET = DEPENDPATH += . INCLUDEPATH += . LIBS += -L/home/tslib -ltslib # Input SOURCES += main.cppI change it but this error display:
fgit@ubuntu:~/helloqt$ gedit '/home/fgit/helloqt/helloqt.pro' fgit@ubuntu:~/helloqt$ make /usr/local/Trolltech/QtEmbedded-4.8.6-arm/bin/qmake -o Makefile helloqt.pro arm-linux-g++ -Wl,-rpath-link,/tmp/FriendlyARM/nanopi2/libs/usr/lib -Wl,-O1 -Wl,-rpath,/usr/local/Trolltech/QtEmbedded-4.8.6-arm/lib -o helloqt main.o -L/tmp/FriendlyARM/nanopi2/libs/usr/lib -L/usr/local/Trolltech/QtEmbedded-4.8.6-arm/lib -L/home/tslib -ltslib -lQtGui -L/usr/local/Trolltech/QtEmbedded-4.8.6-arm/lib -L/tmp/FriendlyARM/nanopi2/libs/usr/lib -lQtNetwork -lQtCore -lpthread /opt/FriendlyARM/toolchain/4.9.3/lib/gcc/arm-cortexa9-linux-gnueabihf/4.9.3/../../../../arm-cortexa9-linux-gnueabihf/bin/ld.bfd: cannot find -ltslib collect2: error: ld returned 1 exit status Makefile:103: recipe for target 'helloqt' failed make: *** [helloqt] Error 1 -
Replace
/home/tslibby the path to where your cross-compiledtslibcan be found -
I have two tslib folder in my Ubuntu :
1- /home/tslib
2- /usr/local/tslibI used both of them but the same error occurred:
fgit@ubuntu:~/helloqt$ make /usr/local/Trolltech/QtEmbedded-4.8.6-arm/bin/qmake -o Makefile helloqt.pro arm-linux-g++ -Wl,-rpath-link=/home/tslib/lib,/tmp/FriendlyARM/nanopi2/libs/usr/lib -Wl,-O1 -Wl,-rpath,/usr/local/Trolltech/QtEmbedded-4.8.6-arm/lib -o helloqt main.o -L/tmp/FriendlyARM/nanopi2/libs/usr/lib -L/usr/local/Trolltech/QtEmbedded-4.8.6-arm/lib -L/usr/local/tslib/lib -ltslib -lQtGui -L/usr/local/Trolltech/QtEmbedded-4.8.6-arm/lib -L/tmp/FriendlyARM/nanopi2/libs/usr/lib -lQtNetwork -lQtCore -lpthread /opt/FriendlyARM/toolchain/4.9.3/lib/gcc/arm-cortexa9-linux-gnueabihf/4.9.3/../../../../arm-cortexa9-linux-gnueabihf/bin/ld.bfd: cannot find /tmp/FriendlyARM/nanopi2/libs/usr/lib: No such file or directory /opt/FriendlyARM/toolchain/4.9.3/lib/gcc/arm-cortexa9-linux-gnueabihf/4.9.3/../../../../arm-cortexa9-linux-gnueabihf/bin/ld.bfd: cannot find -ltslib collect2: error: ld returned 1 exit status Makefile:103: recipe for target 'helloqt' failed make: *** [helloqt] Error 1H.Ghassami
-
I have two tslib folder in my Ubuntu :
1- /home/tslib
2- /usr/local/tslibI used both of them but the same error occurred:
fgit@ubuntu:~/helloqt$ make /usr/local/Trolltech/QtEmbedded-4.8.6-arm/bin/qmake -o Makefile helloqt.pro arm-linux-g++ -Wl,-rpath-link=/home/tslib/lib,/tmp/FriendlyARM/nanopi2/libs/usr/lib -Wl,-O1 -Wl,-rpath,/usr/local/Trolltech/QtEmbedded-4.8.6-arm/lib -o helloqt main.o -L/tmp/FriendlyARM/nanopi2/libs/usr/lib -L/usr/local/Trolltech/QtEmbedded-4.8.6-arm/lib -L/usr/local/tslib/lib -ltslib -lQtGui -L/usr/local/Trolltech/QtEmbedded-4.8.6-arm/lib -L/tmp/FriendlyARM/nanopi2/libs/usr/lib -lQtNetwork -lQtCore -lpthread /opt/FriendlyARM/toolchain/4.9.3/lib/gcc/arm-cortexa9-linux-gnueabihf/4.9.3/../../../../arm-cortexa9-linux-gnueabihf/bin/ld.bfd: cannot find /tmp/FriendlyARM/nanopi2/libs/usr/lib: No such file or directory /opt/FriendlyARM/toolchain/4.9.3/lib/gcc/arm-cortexa9-linux-gnueabihf/4.9.3/../../../../arm-cortexa9-linux-gnueabihf/bin/ld.bfd: cannot find -ltslib collect2: error: ld returned 1 exit status Makefile:103: recipe for target 'helloqt' failed make: *** [helloqt] Error 1@MhM93 Where exactly is the *.so file located inside /home/tslib (which by the way is a strange location for a library as /home usually contains home folders for the users of a UNIX/Linux system)?
It is actually easy: -LPATH - here PATH must be the directory where libtslib.so file is. -
I search this lib in my ubuntu, there is no file with this name " libtslib.so" , but I install tslib completely.
-
You build it statically.
-
is it true?
./configure --host=arm-linux --prefix=/home/tslib --enable-shared=yes --enable-static=no@MhM93 Before you wrote:
Sudo ./configure --host=arm-linux --prefix=/home/tslib --enable-shared=yes --enable-static=yes -
By the way, stop doing everything as root. You should only do the install part as root if needed.
-
@MhM93 Before you wrote:
Sudo ./configure --host=arm-linux --prefix=/home/tslib --enable-shared=yes --enable-static=yesthank you for reply and I am exceuse to annoy you,
@SGaist as you said I used sudo just where nedded.
@jsulm I delete my tslib from /usr/local and /home and follow this steps :$sudo apt-get install git-core $cd /usr/local $git clone http://github.com/kergoth/tslib.git $export PATH=/usr/local/arm/4.7.0/bin:$PATH--> did not do this because my compiler export befor $export CROSS_COMPILE=arm-none-linux-gnueabi- $export CC=${CROSS_COMPILE}gcc $export CFLAGS=-march=armv7l $export CXX=${CROSS_COMPILE}"g++" $export AR=${CROSS_COMPILE}"ar" $export AS=${CROSS_COMPILE}"as" $export RANLIB=${CROSS_COMPILE}"ranlib" $export LD=${CROSS_COMPILE}"ld" $export STRIP=${CROSS_COMPILE}"strip" $export ac_cv_func_malloc_0_nonnull=yes $cd /usr/local/tslib $sudo ./autogen-clean.sh $sudo ./autogen.sh $sudo ./configure --host=arm-linux --prefix=/home/tslib --enable-shared=yes --enable-static=yes $sudo make $sudo make installthen tar my qt4.8.6 again, but that error occurred again, also set the
LIBS += -L/home/tslib -ltslibbut that error occurred again, you said : "It is actually easy: -LPATH - here PATH must be the directory where libtslib.so file is." there is no file in my ubuntu with this name,
as my post before this post ,you told me to wrote "ldd ./myprogram" but my program is returned not a dynamic executable but when I wrote this command with nanopc-t2 it returns:root@NanoPC-T2:/# ldd ./usr/local/Trolltech/QtEmbedded-4.8.6-arm/demos/embedded/fluidlauncher/fluidlauncher libQtGui.so.4 => /usr/local/Trolltech/QtEmbedded-4.8.6-arm/lib/libQtGui.so.4 (0xb668d000) libQtNetwork.so.4 => /usr/local/Trolltech/QtEmbedded-4.8.6-arm/lib/libQtNetwork.so.4 (0xb6595000) libQtCore.so.4 => /usr/local/Trolltech/QtEmbedded-4.8.6-arm/lib/libQtCore.so.4 (0xb62d4000) libpthread.so.0 => /lib/arm-linux-gnueabihf/libpthread.so.0 (0xb62a7000) libstdc++.so.6 => /usr/lib/arm-linux-gnueabihf/libstdc++.so.6 (0xb6199000) libm.so.6 => /lib/arm-linux-gnueabihf/libm.so.6 (0xb6121000) libgcc_s.so.1 => /lib/arm-linux-gnueabihf/libgcc_s.so.1 (0xb60f8000) libc.so.6 => /lib/arm-linux-gnueabihf/libc.so.6 (0xb600c000) libts-1.0.so.0 => /usr/lib/libts-1.0.so.0 (0xb5ffa000) libz.so.1 => /lib/arm-linux-gnueabihf/libz.so.1 (0xb5fd8000) libdl.so.2 => /lib/arm-linux-gnueabihf/libdl.so.2 (0xb5fc5000) librt.so.1 => /lib/arm-linux-gnueabihf/librt.so.1 (0xb5fae000) /lib/ld-linux-armhf.so.3 (0xb6ef5000)this means these librarys should be install on my ubuntu to compile my program and copy it to device(nanopc-T2) and run with.
I am been helpless in this field,
H.Ghassami
-
thank you for reply and I am exceuse to annoy you,
@SGaist as you said I used sudo just where nedded.
@jsulm I delete my tslib from /usr/local and /home and follow this steps :$sudo apt-get install git-core $cd /usr/local $git clone http://github.com/kergoth/tslib.git $export PATH=/usr/local/arm/4.7.0/bin:$PATH--> did not do this because my compiler export befor $export CROSS_COMPILE=arm-none-linux-gnueabi- $export CC=${CROSS_COMPILE}gcc $export CFLAGS=-march=armv7l $export CXX=${CROSS_COMPILE}"g++" $export AR=${CROSS_COMPILE}"ar" $export AS=${CROSS_COMPILE}"as" $export RANLIB=${CROSS_COMPILE}"ranlib" $export LD=${CROSS_COMPILE}"ld" $export STRIP=${CROSS_COMPILE}"strip" $export ac_cv_func_malloc_0_nonnull=yes $cd /usr/local/tslib $sudo ./autogen-clean.sh $sudo ./autogen.sh $sudo ./configure --host=arm-linux --prefix=/home/tslib --enable-shared=yes --enable-static=yes $sudo make $sudo make installthen tar my qt4.8.6 again, but that error occurred again, also set the
LIBS += -L/home/tslib -ltslibbut that error occurred again, you said : "It is actually easy: -LPATH - here PATH must be the directory where libtslib.so file is." there is no file in my ubuntu with this name,
as my post before this post ,you told me to wrote "ldd ./myprogram" but my program is returned not a dynamic executable but when I wrote this command with nanopc-t2 it returns:root@NanoPC-T2:/# ldd ./usr/local/Trolltech/QtEmbedded-4.8.6-arm/demos/embedded/fluidlauncher/fluidlauncher libQtGui.so.4 => /usr/local/Trolltech/QtEmbedded-4.8.6-arm/lib/libQtGui.so.4 (0xb668d000) libQtNetwork.so.4 => /usr/local/Trolltech/QtEmbedded-4.8.6-arm/lib/libQtNetwork.so.4 (0xb6595000) libQtCore.so.4 => /usr/local/Trolltech/QtEmbedded-4.8.6-arm/lib/libQtCore.so.4 (0xb62d4000) libpthread.so.0 => /lib/arm-linux-gnueabihf/libpthread.so.0 (0xb62a7000) libstdc++.so.6 => /usr/lib/arm-linux-gnueabihf/libstdc++.so.6 (0xb6199000) libm.so.6 => /lib/arm-linux-gnueabihf/libm.so.6 (0xb6121000) libgcc_s.so.1 => /lib/arm-linux-gnueabihf/libgcc_s.so.1 (0xb60f8000) libc.so.6 => /lib/arm-linux-gnueabihf/libc.so.6 (0xb600c000) libts-1.0.so.0 => /usr/lib/libts-1.0.so.0 (0xb5ffa000) libz.so.1 => /lib/arm-linux-gnueabihf/libz.so.1 (0xb5fd8000) libdl.so.2 => /lib/arm-linux-gnueabihf/libdl.so.2 (0xb5fc5000) librt.so.1 => /lib/arm-linux-gnueabihf/librt.so.1 (0xb5fae000) /lib/ld-linux-armhf.so.3 (0xb6ef5000)this means these librarys should be install on my ubuntu to compile my program and copy it to device(nanopc-T2) and run with.
I am been helpless in this field,
@MhM93 First: you can see what was installed and where when looking at the output of "make install" - did you check it?
Second: if the file is not there then it apparently wasn't built.
You can see what was built looking at the output of make - did you?
Did you check the tslib build instructions?
Yes, it is easy if you have the correct lib, but if you don't, well, then you're lost.
So, please make sure you built tslib as shared library - before that you will not succeed...
Did you try to change --enable-static=yes to --enable-static=no ?Also: I don't know what exactly the file name of the library will be. It should be something like libtslib.so. Just check the content of /home/tslib. And please check the output of make and make install.
-
And again, stop doing stuff as root, you might be breaking your computer without any warning.
When building somehting do it somewhere in your home folder. There's no sense in having the sources and the build artifacts of your tslib in /usr/local.
Interested in AI ? www.idiap.ch
Please read the Qt Code of Conduct - https://forum.qt.io/topic/113070/qt-code-of-conduct -
And again, stop doing stuff as root, you might be breaking your computer without any warning.
When building somehting do it somewhere in your home folder. There's no sense in having the sources and the build artifacts of your tslib in /usr/local.
@SGaist Thanks for help, I install the tslib from git to home directory, and do the command without sudo command, but when I want to run ./configure command it needs sudo.
fgit@ubuntu:~/tslib$ ./configure --host=arm-linux --prefix=/home/fgit/libts --enable- shared=yes --enable-static=no checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for arm-linux-strip... arm-none-linux-gnueabihf-strip checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... no checking for mawk... mawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether make supports nested variables... (cached) yes checking build system type... x86_64-pc-linux-gnu checking host system type... arm-unknown-linux-gnu checking for arm-linux-gcc... arm-none-linux-gnueabihf-gcc checking whether the C compiler works... no configure: error: in `/home/fgit/tslib': configure: error: C compiler cannot create executables See `config.log' for more detailsthis is config log:
This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake. It was created by tslib configure 1.10-rc1, which was generated by GNU Autoconf 2.69. Invocation command line was $ ./configure --host=arm-linux --prefix=/home/fgit/libts --enable-shared=yes --enable-static=no ## --------- ## ## Platform. ## ## --------- ## hostname = ubuntu uname -m = x86_64 uname -r = 4.4.0-31-generic uname -s = Linux uname -v = #50-Ubuntu SMP Wed Jul 13 00:07:12 UTC 2016 /usr/bin/uname -p = unknown /bin/uname -X = unknown /bin/arch = unknown /usr/bin/arch -k = unknown /usr/convex/getsysinfo = unknown /usr/bin/hostinfo = unknown /bin/machine = unknown /usr/bin/oslevel = unknown /bin/universe = unknown PATH: /opt/FriendlyARM/toolchain/4.9.3/bin PATH: /home/fgit/bin PATH: /home/fgit/.local/bin PATH: /usr/local/sbin PATH: /usr/local/bin PATH: /usr/sbin PATH: /usr/bin PATH: /sbin PATH: /bin PATH: /usr/games PATH: /usr/local/games PATH: /snap/bin ## ----------- ## ## Core tests. ## ## ----------- ## configure:2601: checking for a BSD-compatible install configure:2669: result: /usr/bin/install -c configure:2680: checking whether build environment is sane configure:2735: result: yes configure:2794: checking for arm-linux-strip configure:2821: result: arm-none-linux-gnueabihf-strip configure:2886: checking for a thread-safe mkdir -p configure:2925: result: /bin/mkdir -p configure:2932: checking for gawk configure:2962: result: no configure:2932: checking for mawk configure:2948: found /usr/bin/mawk configure:2959: result: mawk configure:2970: checking whether make sets $(MAKE) configure:2992: result: yes configure:3021: checking whether make supports nested variables configure:3038: result: yes configure:3175: checking whether make supports nested variables configure:3192: result: yes configure:3223: checking build system type configure:3237: result: x86_64-pc-linux-gnu configure:3257: checking host system type configure:3270: result: arm-unknown-linux-gnu configure:3366: checking for arm-linux-gcc configure:3393: result: arm-none-linux-gnueabihf-gcc configure:3662: checking for C compiler version configure:3671: arm-none-linux-gnueabihf-gcc --version >&5 arm-none-linux-gnueabihf-gcc (ctng-1.21.0-229g-FA) 4.9.3 Copyright (C) 2015 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. configure:3682: $? = 0 configure:3671: arm-none-linux-gnueabihf-gcc -v >&5 Using built-in specs. COLLECT_GCC=arm-none-linux-gnueabihf-gcc COLLECT_LTO_WRAPPER=/opt/FriendlyARM/toolchain/4.9.3/libexec/gcc/arm-cortexa9-linux-gnueabihf/4.9.3/lto-wrapper Target: arm-cortexa9-linux-gnueabihf Configured with: /work/toolchain/build/src/gcc-4.9.3/configure --build=x86_64-build_pc-linux-gnu --host=x86_64-build_pc-linux-gnu --target=arm-cortexa9-linux-gnueabihf --prefix=/opt/FriendlyARM/toolchain/4.9.3 --with-sysroot=/opt/FriendlyARM/toolchain/4.9.3/arm-cortexa9-linux-gnueabihf/sys-root --enable-languages=c,c++ --with-arch=armv7-a --with-tune=cortex-a9 --with-fpu=vfpv3 --with-float=hard --with-pkgversion=ctng-1.21.0-229g-FA --with-bugurl=http://www.friendlyarm.com/ --enable-__cxa_atexit --disable-libmudflap --disable-libgomp --disable-libssp --disable-libquadmath --disable-libquadmath-support --disable-libsanitizer --with-gmp=/work/toolchain/build/arm-cortexa9-linux-gnueabihf/buildtools --with-mpfr=/work/toolchain/build/arm-cortexa9-linux-gnueabihf/buildtools --with-mpc=/work/toolchain/build/arm-cortexa9-linux-gnueabihf/buildtools --with-isl=/work/toolchain/build/arm-cortexa9-linux-gnueabihf/buildtools --with-cloog=/work/toolchain/build/arm-cortexa9-linux-gnueabihf/buildtools --with-libelf=/work/toolchain/build/arm-cortexa9-linux-gnueabihf/buildtools --enable-lto --with-host-libstdcxx='-static-libgcc -Wl,-Bstatic,-lstdc++,-Bdynamic -lm' --enable-threads=posix --enable-linker-build-id --with-linker-hash-style=gnu --enable-plugin --enable-gold --disable-multilib --with-local-prefix=/opt/FriendlyARM/toolchain/4.9.3/arm-cortexa9-linux-gnueabihf/sys-root --enable-long-long Thread model: posix gcc version 4.9.3 (ctng-1.21.0-229g-FA) configure:3682: $? = 0 configure:3671: arm-none-linux-gnueabihf-gcc -V >&5 arm-none-linux-gnueabihf-gcc: error: unrecognized command line option '-V' arm-none-linux-gnueabihf-gcc: fatal error: no input files compilation terminated. configure:3682: $? = 1 configure:3671: arm-none-linux-gnueabihf-gcc -qversion >&5 arm-none-linux-gnueabihf-gcc: error: unrecognized command line option '-qversion' arm-none-linux-gnueabihf-gcc: fatal error: no input files compilation terminated. configure:3682: $? = 1 configure:3702: checking whether the C compiler works configure:3724: arm-none-linux-gnueabihf-gcc -march=armv7l conftest.c >&5 arm-none-linux-gnueabihf-gcc: error: unrecognized argument in option '-march=armv7l' arm-none-linux-gnueabihf-gcc: note: valid arguments to '-march=' are: armv2 armv2a armv3 armv3m armv4 armv4t armv5 armv5e armv5t armv5te armv6 armv6-m armv6j armv6k armv6s-m armv6t2 armv6z armv6zk armv7 armv7-a armv7-m armv7-r armv7e-m armv7ve armv8-a armv8-a+crc iwmmxt iwmmxt2 native configure:3728: $? = 1 configure:3766: result: no configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "tslib" | #define PACKAGE_TARNAME "tslib" | #define PACKAGE_VERSION "1.10-rc1" | #define PACKAGE_STRING "tslib 1.10-rc1" | #define PACKAGE_BUGREPORT "tslib@lists.infradead.org" | #define PACKAGE_URL "http://tslib.org" | #define PACKAGE "tslib" | #define VERSION "1.10-rc1" | /* end confdefs.h. */ | | int | main () | { | | ; | return 0; | } configure:3771: error: in `/home/fgit/tslib': configure:3773: error: C compiler cannot create executables See `config.log' for more details ## ---------------- ## ## Cache variables. ## ## ---------------- ## ac_cv_build=x86_64-pc-linux-gnu ac_cv_env_CC_set=set ac_cv_env_CC_value=arm-none-linux-gnueabihf-gcc ac_cv_env_CFLAGS_set=set ac_cv_env_CFLAGS_value=-march=armv7l ac_cv_env_CPPFLAGS_set= ac_cv_env_CPPFLAGS_value= ac_cv_env_CPP_set= ac_cv_env_CPP_value= ac_cv_env_LDFLAGS_set= ac_cv_env_LDFLAGS_value= ac_cv_env_LIBS_set= ac_cv_env_LIBS_value= ac_cv_env_LT_SYS_LIBRARY_PATH_set= ac_cv_env_LT_SYS_LIBRARY_PATH_value= ac_cv_env_build_alias_set= ac_cv_env_build_alias_value= ac_cv_env_host_alias_set=set ac_cv_env_host_alias_value=arm-linux ac_cv_env_target_alias_set= ac_cv_env_target_alias_value= ac_cv_func_malloc_0_nonnull=yes ac_cv_host=arm-unknown-linux-gnu ac_cv_path_install='/usr/bin/install -c' ac_cv_path_mkdir=/bin/mkdir ac_cv_prog_AWK=mawk ac_cv_prog_CC=arm-none-linux-gnueabihf-gcc ac_cv_prog_STRIP=arm-none-linux-gnueabihf-strip ac_cv_prog_make_make_set=yes am_cv_make_support_nested_variables=yes ## ----------------- ## ## Output variables. ## ## ----------------- ## ACLOCAL='${SHELL} /home/fgit/tslib/missing aclocal-1.15' ALLOCA='' AMDEPBACKSLASH='' AMDEP_FALSE='' AMDEP_TRUE='' AMTAR='$${TAR-tar}' AM_BACKSLASH='\' AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)' AM_DEFAULT_VERBOSITY='0' AM_V='$(V)' AR='arm-none-linux-gnueabihf-ar' AUTOCONF='${SHELL} /home/fgit/tslib/missing autoconf' AUTOHEADER='${SHELL} /home/fgit/tslib/missing autoheader' AUTOMAKE='${SHELL} /home/fgit/tslib/missing automake-1.15' AWK='mawk' CC='arm-none-linux-gnueabihf-gcc' CCDEPMODE='' CFLAGS='-march=armv7l' CPP='' CPPFLAGS='' CYGPATH_W='echo' DEBUGFLAGS='' DEFS='' DEPDIR='' DLLTOOL='' DSYMUTIL='' DUMPBIN='' ECHO_C='' ECHO_N='-n' ECHO_T='' EGREP='' ENABLE_ARCTIC2_MODULE_FALSE='' ENABLE_ARCTIC2_MODULE_TRUE='' ENABLE_COLLIE_MODULE_FALSE='' ENABLE_COLLIE_MODULE_TRUE='' ENABLE_CORGI_MODULE_FALSE='' ENABLE_CORGI_MODULE_TRUE='' ENABLE_CY8MRLN_PALMPRE_MODULE_FALSE='' ENABLE_CY8MRLN_PALMPRE_MODULE_TRUE='' ENABLE_DEBOUNCE_MODULE_FALSE='' ENABLE_DEBOUNCE_MODULE_TRUE='' ENABLE_DEJITTER_MODULE_FALSE='' ENABLE_DEJITTER_MODULE_TRUE='' ENABLE_DMC_DUS3000_MODULE_FALSE='' ENABLE_DMC_DUS3000_MODULE_TRUE='' ENABLE_DMC_MODULE_FALSE='' ENABLE_DMC_MODULE_TRUE='' ENABLE_GALAX_MODULE_FALSE='' ENABLE_GALAX_MODULE_TRUE='' ENABLE_H3600_MODULE_FALSE='' ENABLE_H3600_MODULE_TRUE='' ENABLE_IIR_MODULE_FALSE='' ENABLE_IIR_MODULE_TRUE='' ENABLE_INPUT_MODULE_FALSE='' ENABLE_INPUT_MODULE_TRUE='' ENABLE_LINEAR_H2200_MODULE_FALSE='' ENABLE_LINEAR_H2200_MODULE_TRUE='' ENABLE_LINEAR_MODULE_FALSE='' ENABLE_LINEAR_MODULE_TRUE='' ENABLE_MEDIAN_MODULE_FALSE='' ENABLE_MEDIAN_MODULE_TRUE='' ENABLE_MK712_MODULE_FALSE='' ENABLE_MK712_MODULE_TRUE='' ENABLE_PTHRES_MODULE_FALSE='' ENABLE_PTHRES_MODULE_TRUE='' ENABLE_SKIP_MODULE_FALSE='' ENABLE_SKIP_MODULE_TRUE='' ENABLE_STATIC_ARCTIC2_MODULE_FALSE='' ENABLE_STATIC_ARCTIC2_MODULE_TRUE='' ENABLE_STATIC_COLLIE_MODULE_FALSE='' ENABLE_STATIC_COLLIE_MODULE_TRUE='' ENABLE_STATIC_CORGI_MODULE_FALSE='' ENABLE_STATIC_CORGI_MODULE_TRUE='' ENABLE_STATIC_CY8MRLN_PALMPRE_MODULE_FALSE='' ENABLE_STATIC_CY8MRLN_PALMPRE_MODULE_TRUE='' ENABLE_STATIC_DEBOUNCE_MODULE_FALSE='' ENABLE_STATIC_DEBOUNCE_MODULE_TRUE='' ENABLE_STATIC_DEJITTER_MODULE_FALSE='' ENABLE_STATIC_DEJITTER_MODULE_TRUE='' ENABLE_STATIC_DMC_DUS3000_MODULE_FALSE='' ENABLE_STATIC_DMC_DUS3000_MODULE_TRUE='' ENABLE_STATIC_DMC_MODULE_FALSE='' ENABLE_STATIC_DMC_MODULE_TRUE='' ENABLE_STATIC_GALAX_MODULE_FALSE='' ENABLE_STATIC_GALAX_MODULE_TRUE='' ENABLE_STATIC_H3600_MODULE_FALSE='' ENABLE_STATIC_H3600_MODULE_TRUE='' ENABLE_STATIC_IIR_MODULE_FALSE='' ENABLE_STATIC_IIR_MODULE_TRUE='' ENABLE_STATIC_INPUT_MODULE_FALSE='' ENABLE_STATIC_INPUT_MODULE_TRUE='' ENABLE_STATIC_LINEAR_H2200_MODULE_FALSE='' ENABLE_STATIC_LINEAR_H2200_MODULE_TRUE='' ENABLE_STATIC_LINEAR_MODULE_FALSE='' ENABLE_STATIC_LINEAR_MODULE_TRUE='' ENABLE_STATIC_MEDIAN_MODULE_FALSE='' ENABLE_STATIC_MEDIAN_MODULE_TRUE='' ENABLE_STATIC_MK712_MODULE_FALSE='' ENABLE_STATIC_MK712_MODULE_TRUE='' ENABLE_STATIC_PTHRES_MODULE_FALSE='' ENABLE_STATIC_PTHRES_MODULE_TRUE='' ENABLE_STATIC_SKIP_MODULE_FALSE='' ENABLE_STATIC_SKIP_MODULE_TRUE='' ENABLE_STATIC_TATUNG_MODULE_FALSE='' ENABLE_STATIC_TATUNG_MODULE_TRUE='' ENABLE_STATIC_TOUCHKIT_MODULE_FALSE='' ENABLE_STATIC_TOUCHKIT_MODULE_TRUE='' ENABLE_STATIC_UCB1X00_MODULE_FALSE='' ENABLE_STATIC_UCB1X00_MODULE_TRUE='' ENABLE_STATIC_VARIANCE_MODULE_FALSE='' ENABLE_STATIC_VARIANCE_MODULE_TRUE='' ENABLE_STATIC_WAVESHARE_MODULE_FALSE='' ENABLE_STATIC_WAVESHARE_MODULE_TRUE='' ENABLE_TATUNG_MODULE_FALSE='' ENABLE_TATUNG_MODULE_TRUE='' ENABLE_TOOLS_FALSE='' ENABLE_TOOLS_TRUE='' ENABLE_TOUCHKIT_MODULE_FALSE='' ENABLE_TOUCHKIT_MODULE_TRUE='' ENABLE_UCB1X00_MODULE_FALSE='' ENABLE_UCB1X00_MODULE_TRUE='' ENABLE_VARIANCE_MODULE_FALSE='' ENABLE_VARIANCE_MODULE_TRUE='' ENABLE_WAVESHARE_MODULE_FALSE='' ENABLE_WAVESHARE_MODULE_TRUE='' EXEEXT='' FGREP='' FREEBSD_FALSE='' FREEBSD_TRUE='#' GREP='' HAIKU_FALSE='' HAIKU_TRUE='#' HAVE_STRSEP_FALSE='' HAVE_STRSEP_TRUE='' HURD_FALSE='' HURD_TRUE='#' INSTALL_DATA='${INSTALL} -m 644' INSTALL_PROGRAM='${INSTALL}' INSTALL_SCRIPT='${INSTALL}' INSTALL_STRIP_PROGRAM='$(install_sh) -c -s' LD='arm-none-linux-gnueabihf-ld' LDFLAGS='' LIBFLAGS='' LIBOBJS='' LIBS='' LIBTOOL='' LIBTS_VERSION_AGE='' LIBTS_VERSION_CURRENT='' LIBTS_VERSION_REVISION='' LINUX_FALSE='#' LINUX_TRUE='' LIPO='' LN_S='' LTLIBOBJS='' LT_AGE='' LT_CURRENT='' LT_REVISION='' LT_SYS_LIBRARY_PATH='' MAKEINFO='${SHELL} /home/fgit/tslib/missing makeinfo' MANIFEST_TOOL='' MKDIR_P='/bin/mkdir -p' NM='' NMEDIT='' OBJDUMP='' OBJEXT='' OTOOL64='' OTOOL='' PACKAGE='tslib' PACKAGE_BUGREPORT='tslib@lists.infradead.org' PACKAGE_DESCRIPTION='Touchscreen Access Library' PACKAGE_NAME='tslib' PACKAGE_STRING='tslib 1.10-rc1' PACKAGE_TARNAME='tslib' PACKAGE_URL='http://tslib.org' PACKAGE_VERSION='1.10-rc1' PATH_SEPARATOR=':' PLUGIN_DIR='' RANLIB='arm-none-linux-gnueabihf-ranlib' SED='' SET_MAKE='' SHELL='/bin/bash' STRIP='arm-none-linux-gnueabihf-strip' TS_CONF='' TS_POINTERCAL='' VERSION='1.10-rc1' VIS_CFLAGS='' WINDOWS_FALSE='' WINDOWS_TRUE='#' ac_ct_AR='' ac_ct_CC='' ac_ct_DUMPBIN='' am__EXEEXT_FALSE='' am__EXEEXT_TRUE='' am__fastdepCC_FALSE='' am__fastdepCC_TRUE='' am__include='' am__isrc='' am__leading_dot='.' am__nodep='' am__quote='' am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -' bindir='${exec_prefix}/bin' build='x86_64-pc-linux-gnu' build_alias='' build_cpu='x86_64' build_os='linux-gnu' build_vendor='pc' datadir='${datarootdir}' datarootdir='${prefix}/share' docdir='${datarootdir}/doc/${PACKAGE_TARNAME}' dvidir='${docdir}' exec_prefix='NONE' host='arm-unknown-linux-gnu' host_alias='arm-linux' host_cpu='arm' host_os='linux-gnu' host_vendor='unknown' htmldir='${docdir}' includedir='${prefix}/include' infodir='${datarootdir}/info' install_sh='${SHELL} /home/fgit/tslib/install-sh' libdir='${exec_prefix}/lib' libexecdir='${exec_prefix}/libexec' localedir='${datarootdir}/locale' localstatedir='${prefix}/var' mandir='${datarootdir}/man' mkdir_p='$(MKDIR_P)' oldincludedir='/usr/include' pdfdir='${docdir}' prefix='/home/fgit/libts' program_transform_name='s,x,x,' psdir='${docdir}' runstatedir='${localstatedir}/run' sbindir='${exec_prefix}/sbin' sharedstatedir='${prefix}/com' sysconfdir='${prefix}/etc' target_alias='' ## ----------- ## ## confdefs.h. ## ## ----------- ## /* confdefs.h */ #define PACKAGE_NAME "tslib" #define PACKAGE_TARNAME "tslib" #define PACKAGE_VERSION "1.10-rc1" #define PACKAGE_STRING "tslib 1.10-rc1" #define PACKAGE_BUGREPORT "tslib@lists.infradead.org" #define PACKAGE_URL "http://tslib.org" #define PACKAGE "tslib" #define VERSION "1.10-rc1" configure: exit 77but when write sudo command all of them (./configure,make and make install) run with no error.
I copy all from first to home directory and does not use any root directory but those command does not allow me to install without sudo command.@jsulm thanks for reply, this is my output and I dont see any error :
it@ubuntu:~/tslib$ sudo make install Making install in etc make[1]: Entering directory '/home/fgit/tslib/etc' make[2]: Entering directory '/home/fgit/tslib/etc' /bin/mkdir -p '/home/fgit/libts/etc' /usr/bin/install -c -m 644 ts.conf '/home/fgit/libts/etc' make[2]: Nothing to be done for 'install-data-am'. make[2]: Leaving directory '/home/fgit/tslib/etc' make[1]: Leaving directory '/home/fgit/tslib/etc' Making install in src make[1]: Entering directory '/home/fgit/tslib/src' CC ts_attach.lo CC ts_close.lo CC ts_config.lo CC ts_error.lo CC ts_fd.lo CC ts_load_module.lo CC ts_open.lo CC ts_parse_vars.lo CC ts_read.lo CC ts_read_raw.lo CC ts_option.lo CC ts_setup.lo CC ts_version.lo CC ts_strsep.lo CCLD libts.la make[2]: Entering directory '/home/fgit/tslib/src' /bin/mkdir -p '/home/fgit/libts/lib' /bin/bash ../libtool --mode=install /usr/bin/install -c libts.la '/home/fgit/libts/lib' libtool: install: /usr/bin/install -c .libs/libts.so.0.7.0 /home/fgit/libts/lib/libts.so.0.7.0 libtool: install: (cd /home/fgit/libts/lib && { ln -s -f libts.so.0.7.0 libts.so.0 || { rm -f libts.so.0 && ln -s libts.so.0.7.0 libts.so.0; }; }) libtool: install: (cd /home/fgit/libts/lib && { ln -s -f libts.so.0.7.0 libts.so || { rm -f libts.so && ln -s libts.so.0.7.0 libts.so; }; }) libtool: install: /usr/bin/install -c .libs/libts.lai /home/fgit/libts/lib/libts.la libtool: finish: PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin" ldconfig -n /home/fgit/libts/lib ---------------------------------------------------------------------- Libraries have been installed in: /home/fgit/libts/lib If you ever happen to want to link against installed libraries in a given directory, LIBDIR, you must either use libtool, and specify the full pathname of the library, or use the '-LLIBDIR' flag during linking and do at least one of the following: - add LIBDIR to the 'LD_LIBRARY_PATH' environment variable during execution - add LIBDIR to the 'LD_RUN_PATH' environment variable during linking - use the '-Wl,-rpath -Wl,LIBDIR' linker flag - have your system administrator add LIBDIR to '/etc/ld.so.conf' See any operating system documentation about shared libraries for more information, such as the ld(1) and ld.so(8) manual pages. ---------------------------------------------------------------------- /bin/mkdir -p '/home/fgit/libts/include' /usr/bin/install -c -m 644 tslib.h '/home/fgit/libts/include' make[2]: Leaving directory '/home/fgit/tslib/src' make[1]: Leaving directory '/home/fgit/tslib/src' Making install in plugins make[1]: Entering directory '/home/fgit/tslib/plugins' CC linear.lo CCLD linear.la CC dejitter.lo CCLD dejitter.la CC variance.lo CCLD variance.la CC median.lo CCLD median.la CC pthres.lo CCLD pthres.la CC debounce.lo CCLD debounce.la CC skip.lo CCLD skip.la CC iir.lo CCLD iir.la CC ucb1x00-raw.lo CCLD ucb1x00.la CC corgi-raw.lo CCLD corgi.la CC collie-raw.lo CCLD collie.la CC h3600-raw.lo CCLD h3600.la CC mk712-raw.lo CCLD mk712.la CC arctic2-raw.lo CCLD arctic2.la CC tatung-raw.lo CCLD tatung.la CC dmc-raw.lo CCLD dmc.la CC linear-h2200.lo CCLD linear_h2200.la CC input-raw.lo CCLD input.la CC galax-raw.lo CCLD galax.la CC touchkit-raw.lo CCLD touchkit.la CC waveshare-raw.lo CCLD waveshare.la make[2]: Entering directory '/home/fgit/tslib/plugins' /bin/mkdir -p '/home/fgit/libts/lib/ts' /bin/bash ../libtool --mode=install /usr/bin/install -c linear.la dejitter.la variance.la median.la pthres.la debounce.la skip.la iir.la ucb1x00.la corgi.la collie.la h3600.la mk712.la arctic2.la tatung.la dmc.la linear_h2200.la input.la galax.la touchkit.la waveshare.la '/home/fgit/libts/lib/ts' libtool: warning: relinking 'linear.la' libtool: install: (cd /home/fgit/tslib/plugins; /bin/bash "/home/fgit/tslib/libtool" --silent --tag CC --mode=relink gcc -DTS_POINTERCAL=\"/home/fgit/libts/etc/pointercal\" -DTSLIB_INTERNAL -fvisibility=hidden -DGCC_HASCLASSVISIBILITY -O2 -Wall -W -fPIC -module -avoid-version -o linear.la -rpath /home/fgit/libts/lib/ts linear.lo ../src/libts.la ) libtool: install: /usr/bin/install -c .libs/linear.soT /home/fgit/libts/lib/ts/linear.so libtool: install: /usr/bin/install -c .libs/linear.lai /home/fgit/libts/lib/ts/linear.la libtool: warning: relinking 'dejitter.la' libtool: install: (cd /home/fgit/tslib/plugins; /bin/bash "/home/fgit/tslib/libtool" --silent --tag CC --mode=relink gcc -DTS_POINTERCAL=\"/home/fgit/libts/etc/pointercal\" -DTSLIB_INTERNAL -fvisibility=hidden -DGCC_HASCLASSVISIBILITY -O2 -Wall -W -fPIC -module -avoid-version -o dejitter.la -rpath /home/fgit/libts/lib/ts dejitter.lo ../src/libts.la ) libtool: install: /usr/bin/install -c .libs/dejitter.soT /home/fgit/libts/lib/ts/dejitter.so libtool: install: /usr/bin/install -c .libs/dejitter.lai /home/fgit/libts/lib/ts/dejitter.la libtool: warning: relinking 'variance.la' libtool: install: (cd /home/fgit/tslib/plugins; /bin/bash "/home/fgit/tslib/libtool" --silent --tag CC --mode=relink gcc -DTS_POINTERCAL=\"/home/fgit/libts/etc/pointercal\" -DTSLIB_INTERNAL -fvisibility=hidden -DGCC_HASCLASSVISIBILITY -O2 -Wall -W -fPIC -module -avoid-version -o variance.la -rpath /home/fgit/libts/lib/ts variance.lo ../src/libts.la ) libtool: install: /usr/bin/install -c .libs/variance.soT /home/fgit/libts/lib/ts/variance.so libtool: install: /usr/bin/install -c .libs/variance.lai /home/fgit/libts/lib/ts/variance.la libtool: warning: relinking 'median.la' libtool: install: (cd /home/fgit/tslib/plugins; /bin/bash "/home/fgit/tslib/libtool" --silent --tag CC --mode=relink gcc -DTS_POINTERCAL=\"/home/fgit/libts/etc/pointercal\" -DTSLIB_INTERNAL -fvisibility=hidden -DGCC_HASCLASSVISIBILITY -O2 -Wall -W -fPIC -module -avoid-version -o median.la -rpath /home/fgit/libts/lib/ts median.lo ../src/libts.la ) libtool: install: /usr/bin/install -c .libs/median.soT /home/fgit/libts/lib/ts/median.so libtool: install: /usr/bin/install -c .libs/median.lai /home/fgit/libts/lib/ts/median.la libtool: warning: relinking 'pthres.la' libtool: install: (cd /home/fgit/tslib/plugins; /bin/bash "/home/fgit/tslib/libtool" --silent --tag CC --mode=relink gcc -DTS_POINTERCAL=\"/home/fgit/libts/etc/pointercal\" -DTSLIB_INTERNAL -fvisibility=hidden -DGCC_HASCLASSVISIBILITY -O2 -Wall -W -fPIC -module -avoid-version -o pthres.la -rpath /home/fgit/libts/lib/ts pthres.lo ../src/libts.la ) libtool: install: /usr/bin/install -c .libs/pthres.soT /home/fgit/libts/lib/ts/pthres.so libtool: install: /usr/bin/install -c .libs/pthres.lai /home/fgit/libts/lib/ts/pthres.la libtool: warning: relinking 'debounce.la' libtool: install: (cd /home/fgit/tslib/plugins; /bin/bash "/home/fgit/tslib/libtool" --silent --tag CC --mode=relink gcc -DTS_POINTERCAL=\"/home/fgit/libts/etc/pointercal\" -DTSLIB_INTERNAL -fvisibility=hidden -DGCC_HASCLASSVISIBILITY -O2 -Wall -W -fPIC -module -avoid-version -o debounce.la -rpath /home/fgit/libts/lib/ts debounce.lo ../src/libts.la ) libtool: install: /usr/bin/install -c .libs/debounce.soT /home/fgit/libts/lib/ts/debounce.so libtool: install: /usr/bin/install -c .libs/debounce.lai /home/fgit/libts/lib/ts/debounce.la libtool: warning: relinking 'skip.la' libtool: install: (cd /home/fgit/tslib/plugins; /bin/bash "/home/fgit/tslib/libtool" --silent --tag CC --mode=relink gcc -DTS_POINTERCAL=\"/home/fgit/libts/etc/pointercal\" -DTSLIB_INTERNAL -fvisibility=hidden -DGCC_HASCLASSVISIBILITY -O2 -Wall -W -fPIC -module -avoid-version -o skip.la -rpath /home/fgit/libts/lib/ts skip.lo ../src/libts.la ) libtool: install: /usr/bin/install -c .libs/skip.soT /home/fgit/libts/lib/ts/skip.so libtool: install: /usr/bin/install -c .libs/skip.lai /home/fgit/libts/lib/ts/skip.la libtool: warning: relinking 'iir.la' libtool: install: (cd /home/fgit/tslib/plugins; /bin/bash "/home/fgit/tslib/libtool" --silent --tag CC --mode=relink gcc -DTS_POINTERCAL=\"/home/fgit/libts/etc/pointercal\" -DTSLIB_INTERNAL -fvisibility=hidden -DGCC_HASCLASSVISIBILITY -O2 -Wall -W -fPIC -module -avoid-version -o iir.la -rpath /home/fgit/libts/lib/ts iir.lo ../src/libts.la ) libtool: install: /usr/bin/install -c .libs/iir.soT /home/fgit/libts/lib/ts/iir.so libtool: install: /usr/bin/install -c .libs/iir.lai /home/fgit/libts/lib/ts/iir.la libtool: install: /usr/bin/install -c .libs/ucb1x00.so /home/fgit/libts/lib/ts/ucb1x00.so libtool: install: /usr/bin/install -c .libs/ucb1x00.lai /home/fgit/libts/lib/ts/ucb1x00.la libtool: install: /usr/bin/install -c .libs/corgi.so /home/fgit/libts/lib/ts/corgi.so libtool: install: /usr/bin/install -c .libs/corgi.lai /home/fgit/libts/lib/ts/corgi.la libtool: install: /usr/bin/install -c .libs/collie.so /home/fgit/libts/lib/ts/collie.so libtool: install: /usr/bin/install -c .libs/collie.lai /home/fgit/libts/lib/ts/collie.la libtool: install: /usr/bin/install -c .libs/h3600.so /home/fgit/libts/lib/ts/h3600.so libtool: install: /usr/bin/install -c .libs/h3600.lai /home/fgit/libts/lib/ts/h3600.la libtool: install: /usr/bin/install -c .libs/mk712.so /home/fgit/libts/lib/ts/mk712.so libtool: install: /usr/bin/install -c .libs/mk712.lai /home/fgit/libts/lib/ts/mk712.la libtool: install: /usr/bin/install -c .libs/arctic2.so /home/fgit/libts/lib/ts/arctic2.so libtool: install: /usr/bin/install -c .libs/arctic2.lai /home/fgit/libts/lib/ts/arctic2.la libtool: install: /usr/bin/install -c .libs/tatung.so /home/fgit/libts/lib/ts/tatung.so libtool: install: /usr/bin/install -c .libs/tatung.lai /home/fgit/libts/lib/ts/tatung.la libtool: install: /usr/bin/install -c .libs/dmc.so /home/fgit/libts/lib/ts/dmc.so libtool: install: /usr/bin/install -c .libs/dmc.lai /home/fgit/libts/lib/ts/dmc.la libtool: warning: relinking 'linear_h2200.la' libtool: install: (cd /home/fgit/tslib/plugins; /bin/bash "/home/fgit/tslib/libtool" --silent --tag CC --mode=relink gcc -DTS_POINTERCAL=\"/home/fgit/libts/etc/pointercal\" -DTSLIB_INTERNAL -fvisibility=hidden -DGCC_HASCLASSVISIBILITY -O2 -Wall -W -fPIC -module -avoid-version -o linear_h2200.la -rpath /home/fgit/libts/lib/ts linear-h2200.lo ../src/libts.la ) libtool: install: /usr/bin/install -c .libs/linear_h2200.soT /home/fgit/libts/lib/ts/linear_h2200.so libtool: install: /usr/bin/install -c .libs/linear_h2200.lai /home/fgit/libts/lib/ts/linear_h2200.la libtool: warning: relinking 'input.la' libtool: install: (cd /home/fgit/tslib/plugins; /bin/bash "/home/fgit/tslib/libtool" --silent --tag CC --mode=relink gcc -DTS_POINTERCAL=\"/home/fgit/libts/etc/pointercal\" -DTSLIB_INTERNAL -fvisibility=hidden -DGCC_HASCLASSVISIBILITY -O2 -Wall -W -fPIC -module -avoid-version -o input.la -rpath /home/fgit/libts/lib/ts input-raw.lo ../src/libts.la ) libtool: install: /usr/bin/install -c .libs/input.soT /home/fgit/libts/lib/ts/input.so libtool: install: /usr/bin/install -c .libs/input.lai /home/fgit/libts/lib/ts/input.la libtool: warning: relinking 'galax.la' libtool: install: (cd /home/fgit/tslib/plugins; /bin/bash "/home/fgit/tslib/libtool" --silent --tag CC --mode=relink gcc -DTS_POINTERCAL=\"/home/fgit/libts/etc/pointercal\" -DTSLIB_INTERNAL -fvisibility=hidden -DGCC_HASCLASSVISIBILITY -O2 -Wall -W -fPIC -module -avoid-version -o galax.la -rpath /home/fgit/libts/lib/ts galax-raw.lo ../src/libts.la ) libtool: install: /usr/bin/install -c .libs/galax.soT /home/fgit/libts/lib/ts/galax.so libtool: install: /usr/bin/install -c .libs/galax.lai /home/fgit/libts/lib/ts/galax.la libtool: install: /usr/bin/install -c .libs/touchkit.so /home/fgit/libts/lib/ts/touchkit.so libtool: install: /usr/bin/install -c .libs/touchkit.lai /home/fgit/libts/lib/ts/touchkit.la libtool: warning: relinking 'waveshare.la' libtool: install: (cd /home/fgit/tslib/plugins; /bin/bash "/home/fgit/tslib/libtool" --silent --tag CC --mode=relink gcc -DTS_POINTERCAL=\"/home/fgit/libts/etc/pointercal\" -DTSLIB_INTERNAL -fvisibility=hidden -DGCC_HASCLASSVISIBILITY -O2 -Wall -W -fPIC -module -avoid-version -o waveshare.la -rpath /home/fgit/libts/lib/ts waveshare-raw.lo ../src/libts.la ) libtool: install: /usr/bin/install -c .libs/waveshare.soT /home/fgit/libts/lib/ts/waveshare.so libtool: install: /usr/bin/install -c .libs/waveshare.lai /home/fgit/libts/lib/ts/waveshare.la libtool: finish: PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin" ldconfig -n /home/fgit/libts/lib/ts ---------------------------------------------------------------------- Libraries have been installed in: /home/fgit/libts/lib/ts If you ever happen to want to link against installed libraries in a given directory, LIBDIR, you must either use libtool, and specify the full pathname of the library, or use the '-LLIBDIR' flag during linking and do at least one of the following: - add LIBDIR to the 'LD_LIBRARY_PATH' environment variable during execution - add LIBDIR to the 'LD_RUN_PATH' environment variable during linking - use the '-Wl,-rpath -Wl,LIBDIR' linker flag - have your system administrator add LIBDIR to '/etc/ld.so.conf' See any operating system documentation about shared libraries for more information, such as the ld(1) and ld.so(8) manual pages. ---------------------------------------------------------------------- make[2]: Nothing to be done for 'install-data-am'. make[2]: Leaving directory '/home/fgit/tslib/plugins' make[1]: Leaving directory '/home/fgit/tslib/plugins' Making install in tests make[1]: Entering directory '/home/fgit/tslib/tests' CC ts_test.o CC testutils.o CC font_8x8.o CC font_8x16.o CC fbutils-linux.o CCLD ts_test CC ts_test_mt.o CCLD ts_test_mt CC ts_calibrate.o CCLD ts_calibrate CC ts_print.o CCLD ts_print CC ts_print_mt.o CCLD ts_print_mt CC ts_print_raw.o CCLD ts_print_raw CC ts_harvest.o CCLD ts_harvest CC ts_finddev.o CCLD ts_finddev CC ts_verify.o CCLD ts_verify make[2]: Entering directory '/home/fgit/tslib/tests' /bin/mkdir -p '/home/fgit/libts/bin' /bin/bash ../libtool --mode=install /usr/bin/install -c ts_test ts_test_mt ts_calibrate ts_print ts_print_mt ts_print_raw ts_harvest ts_finddev ts_verify '/home/fgit/libts/bin' libtool: install: /usr/bin/install -c .libs/ts_test /home/fgit/libts/bin/ts_test libtool: install: /usr/bin/install -c .libs/ts_test_mt /home/fgit/libts/bin/ts_test_mt libtool: install: /usr/bin/install -c .libs/ts_calibrate /home/fgit/libts/bin/ts_calibrate libtool: install: /usr/bin/install -c .libs/ts_print /home/fgit/libts/bin/ts_print libtool: install: /usr/bin/install -c .libs/ts_print_mt /home/fgit/libts/bin/ts_print_mt libtool: install: /usr/bin/install -c .libs/ts_print_raw /home/fgit/libts/bin/ts_print_raw libtool: install: /usr/bin/install -c .libs/ts_harvest /home/fgit/libts/bin/ts_harvest libtool: install: /usr/bin/install -c .libs/ts_finddev /home/fgit/libts/bin/ts_finddev libtool: install: /usr/bin/install -c .libs/ts_verify /home/fgit/libts/bin/ts_verify make[2]: Nothing to be done for 'install-data-am'. make[2]: Leaving directory '/home/fgit/tslib/tests' make[1]: Leaving directory '/home/fgit/tslib/tests' Making install in tools make[1]: Entering directory '/home/fgit/tslib/tools' CC ts_uinput.o CCLD ts_uinput make[2]: Entering directory '/home/fgit/tslib/tools' /bin/mkdir -p '/home/fgit/libts/bin' /bin/bash ../libtool --mode=install /usr/bin/install -c ts_uinput '/home/fgit/libts/bin' libtool: install: /usr/bin/install -c .libs/ts_uinput /home/fgit/libts/bin/ts_uinput make[2]: Nothing to be done for 'install-data-am'. make[2]: Leaving directory '/home/fgit/tslib/tools' make[1]: Leaving directory '/home/fgit/tslib/tools' Making install in doc make[1]: Entering directory '/home/fgit/tslib/doc' make[2]: Entering directory '/home/fgit/tslib/doc' make[2]: Nothing to be done for 'install-exec-am'. /bin/mkdir -p '/home/fgit/libts/share/man/man1' /usr/bin/install -c -m 644 ts_test.1 ts_test_mt.1 ts_calibrate.1 ts_uinput.1 ts_print.1 ts_print_raw.1 ts_print_mt.1 ts_finddev.1 ts_harvest.1 ts_verify.1 '/home/fgit/libts/share/man/man1' /bin/mkdir -p '/home/fgit/libts/share/man/man3' /usr/bin/install -c -m 644 ts_read.3 ts_read_mt.3 ts_read_raw.3 ts_read_raw_mt.3 ts_open.3 ts_close.3 ts_config.3 ts_setup.3 ts_libversion.3 '/home/fgit/libts/share/man/man3' /bin/mkdir -p '/home/fgit/libts/share/man/man5' /usr/bin/install -c -m 644 ts.conf.5 '/home/fgit/libts/share/man/man5' make[2]: Leaving directory '/home/fgit/tslib/doc' make[1]: Leaving directory '/home/fgit/tslib/doc' make[1]: Entering directory '/home/fgit/tslib' make[2]: Entering directory '/home/fgit/tslib' make[2]: Nothing to be done for 'install-exec-am'. /bin/mkdir -p '/home/fgit/libts/lib/pkgconfig' /usr/bin/install -c -m 644 tslib.pc '/home/fgit/libts/lib/pkgconfig' make[2]: Leaving directory '/home/fgit/tslib' make[1]: Leaving directory '/home/fgit/tslib'H.Ghassami
-
@SGaist Thanks for help, I install the tslib from git to home directory, and do the command without sudo command, but when I want to run ./configure command it needs sudo.
fgit@ubuntu:~/tslib$ ./configure --host=arm-linux --prefix=/home/fgit/libts --enable- shared=yes --enable-static=no checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for arm-linux-strip... arm-none-linux-gnueabihf-strip checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... no checking for mawk... mawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether make supports nested variables... (cached) yes checking build system type... x86_64-pc-linux-gnu checking host system type... arm-unknown-linux-gnu checking for arm-linux-gcc... arm-none-linux-gnueabihf-gcc checking whether the C compiler works... no configure: error: in `/home/fgit/tslib': configure: error: C compiler cannot create executables See `config.log' for more detailsthis is config log:
This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake. It was created by tslib configure 1.10-rc1, which was generated by GNU Autoconf 2.69. Invocation command line was $ ./configure --host=arm-linux --prefix=/home/fgit/libts --enable-shared=yes --enable-static=no ## --------- ## ## Platform. ## ## --------- ## hostname = ubuntu uname -m = x86_64 uname -r = 4.4.0-31-generic uname -s = Linux uname -v = #50-Ubuntu SMP Wed Jul 13 00:07:12 UTC 2016 /usr/bin/uname -p = unknown /bin/uname -X = unknown /bin/arch = unknown /usr/bin/arch -k = unknown /usr/convex/getsysinfo = unknown /usr/bin/hostinfo = unknown /bin/machine = unknown /usr/bin/oslevel = unknown /bin/universe = unknown PATH: /opt/FriendlyARM/toolchain/4.9.3/bin PATH: /home/fgit/bin PATH: /home/fgit/.local/bin PATH: /usr/local/sbin PATH: /usr/local/bin PATH: /usr/sbin PATH: /usr/bin PATH: /sbin PATH: /bin PATH: /usr/games PATH: /usr/local/games PATH: /snap/bin ## ----------- ## ## Core tests. ## ## ----------- ## configure:2601: checking for a BSD-compatible install configure:2669: result: /usr/bin/install -c configure:2680: checking whether build environment is sane configure:2735: result: yes configure:2794: checking for arm-linux-strip configure:2821: result: arm-none-linux-gnueabihf-strip configure:2886: checking for a thread-safe mkdir -p configure:2925: result: /bin/mkdir -p configure:2932: checking for gawk configure:2962: result: no configure:2932: checking for mawk configure:2948: found /usr/bin/mawk configure:2959: result: mawk configure:2970: checking whether make sets $(MAKE) configure:2992: result: yes configure:3021: checking whether make supports nested variables configure:3038: result: yes configure:3175: checking whether make supports nested variables configure:3192: result: yes configure:3223: checking build system type configure:3237: result: x86_64-pc-linux-gnu configure:3257: checking host system type configure:3270: result: arm-unknown-linux-gnu configure:3366: checking for arm-linux-gcc configure:3393: result: arm-none-linux-gnueabihf-gcc configure:3662: checking for C compiler version configure:3671: arm-none-linux-gnueabihf-gcc --version >&5 arm-none-linux-gnueabihf-gcc (ctng-1.21.0-229g-FA) 4.9.3 Copyright (C) 2015 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. configure:3682: $? = 0 configure:3671: arm-none-linux-gnueabihf-gcc -v >&5 Using built-in specs. COLLECT_GCC=arm-none-linux-gnueabihf-gcc COLLECT_LTO_WRAPPER=/opt/FriendlyARM/toolchain/4.9.3/libexec/gcc/arm-cortexa9-linux-gnueabihf/4.9.3/lto-wrapper Target: arm-cortexa9-linux-gnueabihf Configured with: /work/toolchain/build/src/gcc-4.9.3/configure --build=x86_64-build_pc-linux-gnu --host=x86_64-build_pc-linux-gnu --target=arm-cortexa9-linux-gnueabihf --prefix=/opt/FriendlyARM/toolchain/4.9.3 --with-sysroot=/opt/FriendlyARM/toolchain/4.9.3/arm-cortexa9-linux-gnueabihf/sys-root --enable-languages=c,c++ --with-arch=armv7-a --with-tune=cortex-a9 --with-fpu=vfpv3 --with-float=hard --with-pkgversion=ctng-1.21.0-229g-FA --with-bugurl=http://www.friendlyarm.com/ --enable-__cxa_atexit --disable-libmudflap --disable-libgomp --disable-libssp --disable-libquadmath --disable-libquadmath-support --disable-libsanitizer --with-gmp=/work/toolchain/build/arm-cortexa9-linux-gnueabihf/buildtools --with-mpfr=/work/toolchain/build/arm-cortexa9-linux-gnueabihf/buildtools --with-mpc=/work/toolchain/build/arm-cortexa9-linux-gnueabihf/buildtools --with-isl=/work/toolchain/build/arm-cortexa9-linux-gnueabihf/buildtools --with-cloog=/work/toolchain/build/arm-cortexa9-linux-gnueabihf/buildtools --with-libelf=/work/toolchain/build/arm-cortexa9-linux-gnueabihf/buildtools --enable-lto --with-host-libstdcxx='-static-libgcc -Wl,-Bstatic,-lstdc++,-Bdynamic -lm' --enable-threads=posix --enable-linker-build-id --with-linker-hash-style=gnu --enable-plugin --enable-gold --disable-multilib --with-local-prefix=/opt/FriendlyARM/toolchain/4.9.3/arm-cortexa9-linux-gnueabihf/sys-root --enable-long-long Thread model: posix gcc version 4.9.3 (ctng-1.21.0-229g-FA) configure:3682: $? = 0 configure:3671: arm-none-linux-gnueabihf-gcc -V >&5 arm-none-linux-gnueabihf-gcc: error: unrecognized command line option '-V' arm-none-linux-gnueabihf-gcc: fatal error: no input files compilation terminated. configure:3682: $? = 1 configure:3671: arm-none-linux-gnueabihf-gcc -qversion >&5 arm-none-linux-gnueabihf-gcc: error: unrecognized command line option '-qversion' arm-none-linux-gnueabihf-gcc: fatal error: no input files compilation terminated. configure:3682: $? = 1 configure:3702: checking whether the C compiler works configure:3724: arm-none-linux-gnueabihf-gcc -march=armv7l conftest.c >&5 arm-none-linux-gnueabihf-gcc: error: unrecognized argument in option '-march=armv7l' arm-none-linux-gnueabihf-gcc: note: valid arguments to '-march=' are: armv2 armv2a armv3 armv3m armv4 armv4t armv5 armv5e armv5t armv5te armv6 armv6-m armv6j armv6k armv6s-m armv6t2 armv6z armv6zk armv7 armv7-a armv7-m armv7-r armv7e-m armv7ve armv8-a armv8-a+crc iwmmxt iwmmxt2 native configure:3728: $? = 1 configure:3766: result: no configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "tslib" | #define PACKAGE_TARNAME "tslib" | #define PACKAGE_VERSION "1.10-rc1" | #define PACKAGE_STRING "tslib 1.10-rc1" | #define PACKAGE_BUGREPORT "tslib@lists.infradead.org" | #define PACKAGE_URL "http://tslib.org" | #define PACKAGE "tslib" | #define VERSION "1.10-rc1" | /* end confdefs.h. */ | | int | main () | { | | ; | return 0; | } configure:3771: error: in `/home/fgit/tslib': configure:3773: error: C compiler cannot create executables See `config.log' for more details ## ---------------- ## ## Cache variables. ## ## ---------------- ## ac_cv_build=x86_64-pc-linux-gnu ac_cv_env_CC_set=set ac_cv_env_CC_value=arm-none-linux-gnueabihf-gcc ac_cv_env_CFLAGS_set=set ac_cv_env_CFLAGS_value=-march=armv7l ac_cv_env_CPPFLAGS_set= ac_cv_env_CPPFLAGS_value= ac_cv_env_CPP_set= ac_cv_env_CPP_value= ac_cv_env_LDFLAGS_set= ac_cv_env_LDFLAGS_value= ac_cv_env_LIBS_set= ac_cv_env_LIBS_value= ac_cv_env_LT_SYS_LIBRARY_PATH_set= ac_cv_env_LT_SYS_LIBRARY_PATH_value= ac_cv_env_build_alias_set= ac_cv_env_build_alias_value= ac_cv_env_host_alias_set=set ac_cv_env_host_alias_value=arm-linux ac_cv_env_target_alias_set= ac_cv_env_target_alias_value= ac_cv_func_malloc_0_nonnull=yes ac_cv_host=arm-unknown-linux-gnu ac_cv_path_install='/usr/bin/install -c' ac_cv_path_mkdir=/bin/mkdir ac_cv_prog_AWK=mawk ac_cv_prog_CC=arm-none-linux-gnueabihf-gcc ac_cv_prog_STRIP=arm-none-linux-gnueabihf-strip ac_cv_prog_make_make_set=yes am_cv_make_support_nested_variables=yes ## ----------------- ## ## Output variables. ## ## ----------------- ## ACLOCAL='${SHELL} /home/fgit/tslib/missing aclocal-1.15' ALLOCA='' AMDEPBACKSLASH='' AMDEP_FALSE='' AMDEP_TRUE='' AMTAR='$${TAR-tar}' AM_BACKSLASH='\' AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)' AM_DEFAULT_VERBOSITY='0' AM_V='$(V)' AR='arm-none-linux-gnueabihf-ar' AUTOCONF='${SHELL} /home/fgit/tslib/missing autoconf' AUTOHEADER='${SHELL} /home/fgit/tslib/missing autoheader' AUTOMAKE='${SHELL} /home/fgit/tslib/missing automake-1.15' AWK='mawk' CC='arm-none-linux-gnueabihf-gcc' CCDEPMODE='' CFLAGS='-march=armv7l' CPP='' CPPFLAGS='' CYGPATH_W='echo' DEBUGFLAGS='' DEFS='' DEPDIR='' DLLTOOL='' DSYMUTIL='' DUMPBIN='' ECHO_C='' ECHO_N='-n' ECHO_T='' EGREP='' ENABLE_ARCTIC2_MODULE_FALSE='' ENABLE_ARCTIC2_MODULE_TRUE='' ENABLE_COLLIE_MODULE_FALSE='' ENABLE_COLLIE_MODULE_TRUE='' ENABLE_CORGI_MODULE_FALSE='' ENABLE_CORGI_MODULE_TRUE='' ENABLE_CY8MRLN_PALMPRE_MODULE_FALSE='' ENABLE_CY8MRLN_PALMPRE_MODULE_TRUE='' ENABLE_DEBOUNCE_MODULE_FALSE='' ENABLE_DEBOUNCE_MODULE_TRUE='' ENABLE_DEJITTER_MODULE_FALSE='' ENABLE_DEJITTER_MODULE_TRUE='' ENABLE_DMC_DUS3000_MODULE_FALSE='' ENABLE_DMC_DUS3000_MODULE_TRUE='' ENABLE_DMC_MODULE_FALSE='' ENABLE_DMC_MODULE_TRUE='' ENABLE_GALAX_MODULE_FALSE='' ENABLE_GALAX_MODULE_TRUE='' ENABLE_H3600_MODULE_FALSE='' ENABLE_H3600_MODULE_TRUE='' ENABLE_IIR_MODULE_FALSE='' ENABLE_IIR_MODULE_TRUE='' ENABLE_INPUT_MODULE_FALSE='' ENABLE_INPUT_MODULE_TRUE='' ENABLE_LINEAR_H2200_MODULE_FALSE='' ENABLE_LINEAR_H2200_MODULE_TRUE='' ENABLE_LINEAR_MODULE_FALSE='' ENABLE_LINEAR_MODULE_TRUE='' ENABLE_MEDIAN_MODULE_FALSE='' ENABLE_MEDIAN_MODULE_TRUE='' ENABLE_MK712_MODULE_FALSE='' ENABLE_MK712_MODULE_TRUE='' ENABLE_PTHRES_MODULE_FALSE='' ENABLE_PTHRES_MODULE_TRUE='' ENABLE_SKIP_MODULE_FALSE='' ENABLE_SKIP_MODULE_TRUE='' ENABLE_STATIC_ARCTIC2_MODULE_FALSE='' ENABLE_STATIC_ARCTIC2_MODULE_TRUE='' ENABLE_STATIC_COLLIE_MODULE_FALSE='' ENABLE_STATIC_COLLIE_MODULE_TRUE='' ENABLE_STATIC_CORGI_MODULE_FALSE='' ENABLE_STATIC_CORGI_MODULE_TRUE='' ENABLE_STATIC_CY8MRLN_PALMPRE_MODULE_FALSE='' ENABLE_STATIC_CY8MRLN_PALMPRE_MODULE_TRUE='' ENABLE_STATIC_DEBOUNCE_MODULE_FALSE='' ENABLE_STATIC_DEBOUNCE_MODULE_TRUE='' ENABLE_STATIC_DEJITTER_MODULE_FALSE='' ENABLE_STATIC_DEJITTER_MODULE_TRUE='' ENABLE_STATIC_DMC_DUS3000_MODULE_FALSE='' ENABLE_STATIC_DMC_DUS3000_MODULE_TRUE='' ENABLE_STATIC_DMC_MODULE_FALSE='' ENABLE_STATIC_DMC_MODULE_TRUE='' ENABLE_STATIC_GALAX_MODULE_FALSE='' ENABLE_STATIC_GALAX_MODULE_TRUE='' ENABLE_STATIC_H3600_MODULE_FALSE='' ENABLE_STATIC_H3600_MODULE_TRUE='' ENABLE_STATIC_IIR_MODULE_FALSE='' ENABLE_STATIC_IIR_MODULE_TRUE='' ENABLE_STATIC_INPUT_MODULE_FALSE='' ENABLE_STATIC_INPUT_MODULE_TRUE='' ENABLE_STATIC_LINEAR_H2200_MODULE_FALSE='' ENABLE_STATIC_LINEAR_H2200_MODULE_TRUE='' ENABLE_STATIC_LINEAR_MODULE_FALSE='' ENABLE_STATIC_LINEAR_MODULE_TRUE='' ENABLE_STATIC_MEDIAN_MODULE_FALSE='' ENABLE_STATIC_MEDIAN_MODULE_TRUE='' ENABLE_STATIC_MK712_MODULE_FALSE='' ENABLE_STATIC_MK712_MODULE_TRUE='' ENABLE_STATIC_PTHRES_MODULE_FALSE='' ENABLE_STATIC_PTHRES_MODULE_TRUE='' ENABLE_STATIC_SKIP_MODULE_FALSE='' ENABLE_STATIC_SKIP_MODULE_TRUE='' ENABLE_STATIC_TATUNG_MODULE_FALSE='' ENABLE_STATIC_TATUNG_MODULE_TRUE='' ENABLE_STATIC_TOUCHKIT_MODULE_FALSE='' ENABLE_STATIC_TOUCHKIT_MODULE_TRUE='' ENABLE_STATIC_UCB1X00_MODULE_FALSE='' ENABLE_STATIC_UCB1X00_MODULE_TRUE='' ENABLE_STATIC_VARIANCE_MODULE_FALSE='' ENABLE_STATIC_VARIANCE_MODULE_TRUE='' ENABLE_STATIC_WAVESHARE_MODULE_FALSE='' ENABLE_STATIC_WAVESHARE_MODULE_TRUE='' ENABLE_TATUNG_MODULE_FALSE='' ENABLE_TATUNG_MODULE_TRUE='' ENABLE_TOOLS_FALSE='' ENABLE_TOOLS_TRUE='' ENABLE_TOUCHKIT_MODULE_FALSE='' ENABLE_TOUCHKIT_MODULE_TRUE='' ENABLE_UCB1X00_MODULE_FALSE='' ENABLE_UCB1X00_MODULE_TRUE='' ENABLE_VARIANCE_MODULE_FALSE='' ENABLE_VARIANCE_MODULE_TRUE='' ENABLE_WAVESHARE_MODULE_FALSE='' ENABLE_WAVESHARE_MODULE_TRUE='' EXEEXT='' FGREP='' FREEBSD_FALSE='' FREEBSD_TRUE='#' GREP='' HAIKU_FALSE='' HAIKU_TRUE='#' HAVE_STRSEP_FALSE='' HAVE_STRSEP_TRUE='' HURD_FALSE='' HURD_TRUE='#' INSTALL_DATA='${INSTALL} -m 644' INSTALL_PROGRAM='${INSTALL}' INSTALL_SCRIPT='${INSTALL}' INSTALL_STRIP_PROGRAM='$(install_sh) -c -s' LD='arm-none-linux-gnueabihf-ld' LDFLAGS='' LIBFLAGS='' LIBOBJS='' LIBS='' LIBTOOL='' LIBTS_VERSION_AGE='' LIBTS_VERSION_CURRENT='' LIBTS_VERSION_REVISION='' LINUX_FALSE='#' LINUX_TRUE='' LIPO='' LN_S='' LTLIBOBJS='' LT_AGE='' LT_CURRENT='' LT_REVISION='' LT_SYS_LIBRARY_PATH='' MAKEINFO='${SHELL} /home/fgit/tslib/missing makeinfo' MANIFEST_TOOL='' MKDIR_P='/bin/mkdir -p' NM='' NMEDIT='' OBJDUMP='' OBJEXT='' OTOOL64='' OTOOL='' PACKAGE='tslib' PACKAGE_BUGREPORT='tslib@lists.infradead.org' PACKAGE_DESCRIPTION='Touchscreen Access Library' PACKAGE_NAME='tslib' PACKAGE_STRING='tslib 1.10-rc1' PACKAGE_TARNAME='tslib' PACKAGE_URL='http://tslib.org' PACKAGE_VERSION='1.10-rc1' PATH_SEPARATOR=':' PLUGIN_DIR='' RANLIB='arm-none-linux-gnueabihf-ranlib' SED='' SET_MAKE='' SHELL='/bin/bash' STRIP='arm-none-linux-gnueabihf-strip' TS_CONF='' TS_POINTERCAL='' VERSION='1.10-rc1' VIS_CFLAGS='' WINDOWS_FALSE='' WINDOWS_TRUE='#' ac_ct_AR='' ac_ct_CC='' ac_ct_DUMPBIN='' am__EXEEXT_FALSE='' am__EXEEXT_TRUE='' am__fastdepCC_FALSE='' am__fastdepCC_TRUE='' am__include='' am__isrc='' am__leading_dot='.' am__nodep='' am__quote='' am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -' bindir='${exec_prefix}/bin' build='x86_64-pc-linux-gnu' build_alias='' build_cpu='x86_64' build_os='linux-gnu' build_vendor='pc' datadir='${datarootdir}' datarootdir='${prefix}/share' docdir='${datarootdir}/doc/${PACKAGE_TARNAME}' dvidir='${docdir}' exec_prefix='NONE' host='arm-unknown-linux-gnu' host_alias='arm-linux' host_cpu='arm' host_os='linux-gnu' host_vendor='unknown' htmldir='${docdir}' includedir='${prefix}/include' infodir='${datarootdir}/info' install_sh='${SHELL} /home/fgit/tslib/install-sh' libdir='${exec_prefix}/lib' libexecdir='${exec_prefix}/libexec' localedir='${datarootdir}/locale' localstatedir='${prefix}/var' mandir='${datarootdir}/man' mkdir_p='$(MKDIR_P)' oldincludedir='/usr/include' pdfdir='${docdir}' prefix='/home/fgit/libts' program_transform_name='s,x,x,' psdir='${docdir}' runstatedir='${localstatedir}/run' sbindir='${exec_prefix}/sbin' sharedstatedir='${prefix}/com' sysconfdir='${prefix}/etc' target_alias='' ## ----------- ## ## confdefs.h. ## ## ----------- ## /* confdefs.h */ #define PACKAGE_NAME "tslib" #define PACKAGE_TARNAME "tslib" #define PACKAGE_VERSION "1.10-rc1" #define PACKAGE_STRING "tslib 1.10-rc1" #define PACKAGE_BUGREPORT "tslib@lists.infradead.org" #define PACKAGE_URL "http://tslib.org" #define PACKAGE "tslib" #define VERSION "1.10-rc1" configure: exit 77but when write sudo command all of them (./configure,make and make install) run with no error.
I copy all from first to home directory and does not use any root directory but those command does not allow me to install without sudo command.@jsulm thanks for reply, this is my output and I dont see any error :
it@ubuntu:~/tslib$ sudo make install Making install in etc make[1]: Entering directory '/home/fgit/tslib/etc' make[2]: Entering directory '/home/fgit/tslib/etc' /bin/mkdir -p '/home/fgit/libts/etc' /usr/bin/install -c -m 644 ts.conf '/home/fgit/libts/etc' make[2]: Nothing to be done for 'install-data-am'. make[2]: Leaving directory '/home/fgit/tslib/etc' make[1]: Leaving directory '/home/fgit/tslib/etc' Making install in src make[1]: Entering directory '/home/fgit/tslib/src' CC ts_attach.lo CC ts_close.lo CC ts_config.lo CC ts_error.lo CC ts_fd.lo CC ts_load_module.lo CC ts_open.lo CC ts_parse_vars.lo CC ts_read.lo CC ts_read_raw.lo CC ts_option.lo CC ts_setup.lo CC ts_version.lo CC ts_strsep.lo CCLD libts.la make[2]: Entering directory '/home/fgit/tslib/src' /bin/mkdir -p '/home/fgit/libts/lib' /bin/bash ../libtool --mode=install /usr/bin/install -c libts.la '/home/fgit/libts/lib' libtool: install: /usr/bin/install -c .libs/libts.so.0.7.0 /home/fgit/libts/lib/libts.so.0.7.0 libtool: install: (cd /home/fgit/libts/lib && { ln -s -f libts.so.0.7.0 libts.so.0 || { rm -f libts.so.0 && ln -s libts.so.0.7.0 libts.so.0; }; }) libtool: install: (cd /home/fgit/libts/lib && { ln -s -f libts.so.0.7.0 libts.so || { rm -f libts.so && ln -s libts.so.0.7.0 libts.so; }; }) libtool: install: /usr/bin/install -c .libs/libts.lai /home/fgit/libts/lib/libts.la libtool: finish: PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin" ldconfig -n /home/fgit/libts/lib ---------------------------------------------------------------------- Libraries have been installed in: /home/fgit/libts/lib If you ever happen to want to link against installed libraries in a given directory, LIBDIR, you must either use libtool, and specify the full pathname of the library, or use the '-LLIBDIR' flag during linking and do at least one of the following: - add LIBDIR to the 'LD_LIBRARY_PATH' environment variable during execution - add LIBDIR to the 'LD_RUN_PATH' environment variable during linking - use the '-Wl,-rpath -Wl,LIBDIR' linker flag - have your system administrator add LIBDIR to '/etc/ld.so.conf' See any operating system documentation about shared libraries for more information, such as the ld(1) and ld.so(8) manual pages. ---------------------------------------------------------------------- /bin/mkdir -p '/home/fgit/libts/include' /usr/bin/install -c -m 644 tslib.h '/home/fgit/libts/include' make[2]: Leaving directory '/home/fgit/tslib/src' make[1]: Leaving directory '/home/fgit/tslib/src' Making install in plugins make[1]: Entering directory '/home/fgit/tslib/plugins' CC linear.lo CCLD linear.la CC dejitter.lo CCLD dejitter.la CC variance.lo CCLD variance.la CC median.lo CCLD median.la CC pthres.lo CCLD pthres.la CC debounce.lo CCLD debounce.la CC skip.lo CCLD skip.la CC iir.lo CCLD iir.la CC ucb1x00-raw.lo CCLD ucb1x00.la CC corgi-raw.lo CCLD corgi.la CC collie-raw.lo CCLD collie.la CC h3600-raw.lo CCLD h3600.la CC mk712-raw.lo CCLD mk712.la CC arctic2-raw.lo CCLD arctic2.la CC tatung-raw.lo CCLD tatung.la CC dmc-raw.lo CCLD dmc.la CC linear-h2200.lo CCLD linear_h2200.la CC input-raw.lo CCLD input.la CC galax-raw.lo CCLD galax.la CC touchkit-raw.lo CCLD touchkit.la CC waveshare-raw.lo CCLD waveshare.la make[2]: Entering directory '/home/fgit/tslib/plugins' /bin/mkdir -p '/home/fgit/libts/lib/ts' /bin/bash ../libtool --mode=install /usr/bin/install -c linear.la dejitter.la variance.la median.la pthres.la debounce.la skip.la iir.la ucb1x00.la corgi.la collie.la h3600.la mk712.la arctic2.la tatung.la dmc.la linear_h2200.la input.la galax.la touchkit.la waveshare.la '/home/fgit/libts/lib/ts' libtool: warning: relinking 'linear.la' libtool: install: (cd /home/fgit/tslib/plugins; /bin/bash "/home/fgit/tslib/libtool" --silent --tag CC --mode=relink gcc -DTS_POINTERCAL=\"/home/fgit/libts/etc/pointercal\" -DTSLIB_INTERNAL -fvisibility=hidden -DGCC_HASCLASSVISIBILITY -O2 -Wall -W -fPIC -module -avoid-version -o linear.la -rpath /home/fgit/libts/lib/ts linear.lo ../src/libts.la ) libtool: install: /usr/bin/install -c .libs/linear.soT /home/fgit/libts/lib/ts/linear.so libtool: install: /usr/bin/install -c .libs/linear.lai /home/fgit/libts/lib/ts/linear.la libtool: warning: relinking 'dejitter.la' libtool: install: (cd /home/fgit/tslib/plugins; /bin/bash "/home/fgit/tslib/libtool" --silent --tag CC --mode=relink gcc -DTS_POINTERCAL=\"/home/fgit/libts/etc/pointercal\" -DTSLIB_INTERNAL -fvisibility=hidden -DGCC_HASCLASSVISIBILITY -O2 -Wall -W -fPIC -module -avoid-version -o dejitter.la -rpath /home/fgit/libts/lib/ts dejitter.lo ../src/libts.la ) libtool: install: /usr/bin/install -c .libs/dejitter.soT /home/fgit/libts/lib/ts/dejitter.so libtool: install: /usr/bin/install -c .libs/dejitter.lai /home/fgit/libts/lib/ts/dejitter.la libtool: warning: relinking 'variance.la' libtool: install: (cd /home/fgit/tslib/plugins; /bin/bash "/home/fgit/tslib/libtool" --silent --tag CC --mode=relink gcc -DTS_POINTERCAL=\"/home/fgit/libts/etc/pointercal\" -DTSLIB_INTERNAL -fvisibility=hidden -DGCC_HASCLASSVISIBILITY -O2 -Wall -W -fPIC -module -avoid-version -o variance.la -rpath /home/fgit/libts/lib/ts variance.lo ../src/libts.la ) libtool: install: /usr/bin/install -c .libs/variance.soT /home/fgit/libts/lib/ts/variance.so libtool: install: /usr/bin/install -c .libs/variance.lai /home/fgit/libts/lib/ts/variance.la libtool: warning: relinking 'median.la' libtool: install: (cd /home/fgit/tslib/plugins; /bin/bash "/home/fgit/tslib/libtool" --silent --tag CC --mode=relink gcc -DTS_POINTERCAL=\"/home/fgit/libts/etc/pointercal\" -DTSLIB_INTERNAL -fvisibility=hidden -DGCC_HASCLASSVISIBILITY -O2 -Wall -W -fPIC -module -avoid-version -o median.la -rpath /home/fgit/libts/lib/ts median.lo ../src/libts.la ) libtool: install: /usr/bin/install -c .libs/median.soT /home/fgit/libts/lib/ts/median.so libtool: install: /usr/bin/install -c .libs/median.lai /home/fgit/libts/lib/ts/median.la libtool: warning: relinking 'pthres.la' libtool: install: (cd /home/fgit/tslib/plugins; /bin/bash "/home/fgit/tslib/libtool" --silent --tag CC --mode=relink gcc -DTS_POINTERCAL=\"/home/fgit/libts/etc/pointercal\" -DTSLIB_INTERNAL -fvisibility=hidden -DGCC_HASCLASSVISIBILITY -O2 -Wall -W -fPIC -module -avoid-version -o pthres.la -rpath /home/fgit/libts/lib/ts pthres.lo ../src/libts.la ) libtool: install: /usr/bin/install -c .libs/pthres.soT /home/fgit/libts/lib/ts/pthres.so libtool: install: /usr/bin/install -c .libs/pthres.lai /home/fgit/libts/lib/ts/pthres.la libtool: warning: relinking 'debounce.la' libtool: install: (cd /home/fgit/tslib/plugins; /bin/bash "/home/fgit/tslib/libtool" --silent --tag CC --mode=relink gcc -DTS_POINTERCAL=\"/home/fgit/libts/etc/pointercal\" -DTSLIB_INTERNAL -fvisibility=hidden -DGCC_HASCLASSVISIBILITY -O2 -Wall -W -fPIC -module -avoid-version -o debounce.la -rpath /home/fgit/libts/lib/ts debounce.lo ../src/libts.la ) libtool: install: /usr/bin/install -c .libs/debounce.soT /home/fgit/libts/lib/ts/debounce.so libtool: install: /usr/bin/install -c .libs/debounce.lai /home/fgit/libts/lib/ts/debounce.la libtool: warning: relinking 'skip.la' libtool: install: (cd /home/fgit/tslib/plugins; /bin/bash "/home/fgit/tslib/libtool" --silent --tag CC --mode=relink gcc -DTS_POINTERCAL=\"/home/fgit/libts/etc/pointercal\" -DTSLIB_INTERNAL -fvisibility=hidden -DGCC_HASCLASSVISIBILITY -O2 -Wall -W -fPIC -module -avoid-version -o skip.la -rpath /home/fgit/libts/lib/ts skip.lo ../src/libts.la ) libtool: install: /usr/bin/install -c .libs/skip.soT /home/fgit/libts/lib/ts/skip.so libtool: install: /usr/bin/install -c .libs/skip.lai /home/fgit/libts/lib/ts/skip.la libtool: warning: relinking 'iir.la' libtool: install: (cd /home/fgit/tslib/plugins; /bin/bash "/home/fgit/tslib/libtool" --silent --tag CC --mode=relink gcc -DTS_POINTERCAL=\"/home/fgit/libts/etc/pointercal\" -DTSLIB_INTERNAL -fvisibility=hidden -DGCC_HASCLASSVISIBILITY -O2 -Wall -W -fPIC -module -avoid-version -o iir.la -rpath /home/fgit/libts/lib/ts iir.lo ../src/libts.la ) libtool: install: /usr/bin/install -c .libs/iir.soT /home/fgit/libts/lib/ts/iir.so libtool: install: /usr/bin/install -c .libs/iir.lai /home/fgit/libts/lib/ts/iir.la libtool: install: /usr/bin/install -c .libs/ucb1x00.so /home/fgit/libts/lib/ts/ucb1x00.so libtool: install: /usr/bin/install -c .libs/ucb1x00.lai /home/fgit/libts/lib/ts/ucb1x00.la libtool: install: /usr/bin/install -c .libs/corgi.so /home/fgit/libts/lib/ts/corgi.so libtool: install: /usr/bin/install -c .libs/corgi.lai /home/fgit/libts/lib/ts/corgi.la libtool: install: /usr/bin/install -c .libs/collie.so /home/fgit/libts/lib/ts/collie.so libtool: install: /usr/bin/install -c .libs/collie.lai /home/fgit/libts/lib/ts/collie.la libtool: install: /usr/bin/install -c .libs/h3600.so /home/fgit/libts/lib/ts/h3600.so libtool: install: /usr/bin/install -c .libs/h3600.lai /home/fgit/libts/lib/ts/h3600.la libtool: install: /usr/bin/install -c .libs/mk712.so /home/fgit/libts/lib/ts/mk712.so libtool: install: /usr/bin/install -c .libs/mk712.lai /home/fgit/libts/lib/ts/mk712.la libtool: install: /usr/bin/install -c .libs/arctic2.so /home/fgit/libts/lib/ts/arctic2.so libtool: install: /usr/bin/install -c .libs/arctic2.lai /home/fgit/libts/lib/ts/arctic2.la libtool: install: /usr/bin/install -c .libs/tatung.so /home/fgit/libts/lib/ts/tatung.so libtool: install: /usr/bin/install -c .libs/tatung.lai /home/fgit/libts/lib/ts/tatung.la libtool: install: /usr/bin/install -c .libs/dmc.so /home/fgit/libts/lib/ts/dmc.so libtool: install: /usr/bin/install -c .libs/dmc.lai /home/fgit/libts/lib/ts/dmc.la libtool: warning: relinking 'linear_h2200.la' libtool: install: (cd /home/fgit/tslib/plugins; /bin/bash "/home/fgit/tslib/libtool" --silent --tag CC --mode=relink gcc -DTS_POINTERCAL=\"/home/fgit/libts/etc/pointercal\" -DTSLIB_INTERNAL -fvisibility=hidden -DGCC_HASCLASSVISIBILITY -O2 -Wall -W -fPIC -module -avoid-version -o linear_h2200.la -rpath /home/fgit/libts/lib/ts linear-h2200.lo ../src/libts.la ) libtool: install: /usr/bin/install -c .libs/linear_h2200.soT /home/fgit/libts/lib/ts/linear_h2200.so libtool: install: /usr/bin/install -c .libs/linear_h2200.lai /home/fgit/libts/lib/ts/linear_h2200.la libtool: warning: relinking 'input.la' libtool: install: (cd /home/fgit/tslib/plugins; /bin/bash "/home/fgit/tslib/libtool" --silent --tag CC --mode=relink gcc -DTS_POINTERCAL=\"/home/fgit/libts/etc/pointercal\" -DTSLIB_INTERNAL -fvisibility=hidden -DGCC_HASCLASSVISIBILITY -O2 -Wall -W -fPIC -module -avoid-version -o input.la -rpath /home/fgit/libts/lib/ts input-raw.lo ../src/libts.la ) libtool: install: /usr/bin/install -c .libs/input.soT /home/fgit/libts/lib/ts/input.so libtool: install: /usr/bin/install -c .libs/input.lai /home/fgit/libts/lib/ts/input.la libtool: warning: relinking 'galax.la' libtool: install: (cd /home/fgit/tslib/plugins; /bin/bash "/home/fgit/tslib/libtool" --silent --tag CC --mode=relink gcc -DTS_POINTERCAL=\"/home/fgit/libts/etc/pointercal\" -DTSLIB_INTERNAL -fvisibility=hidden -DGCC_HASCLASSVISIBILITY -O2 -Wall -W -fPIC -module -avoid-version -o galax.la -rpath /home/fgit/libts/lib/ts galax-raw.lo ../src/libts.la ) libtool: install: /usr/bin/install -c .libs/galax.soT /home/fgit/libts/lib/ts/galax.so libtool: install: /usr/bin/install -c .libs/galax.lai /home/fgit/libts/lib/ts/galax.la libtool: install: /usr/bin/install -c .libs/touchkit.so /home/fgit/libts/lib/ts/touchkit.so libtool: install: /usr/bin/install -c .libs/touchkit.lai /home/fgit/libts/lib/ts/touchkit.la libtool: warning: relinking 'waveshare.la' libtool: install: (cd /home/fgit/tslib/plugins; /bin/bash "/home/fgit/tslib/libtool" --silent --tag CC --mode=relink gcc -DTS_POINTERCAL=\"/home/fgit/libts/etc/pointercal\" -DTSLIB_INTERNAL -fvisibility=hidden -DGCC_HASCLASSVISIBILITY -O2 -Wall -W -fPIC -module -avoid-version -o waveshare.la -rpath /home/fgit/libts/lib/ts waveshare-raw.lo ../src/libts.la ) libtool: install: /usr/bin/install -c .libs/waveshare.soT /home/fgit/libts/lib/ts/waveshare.so libtool: install: /usr/bin/install -c .libs/waveshare.lai /home/fgit/libts/lib/ts/waveshare.la libtool: finish: PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin" ldconfig -n /home/fgit/libts/lib/ts ---------------------------------------------------------------------- Libraries have been installed in: /home/fgit/libts/lib/ts If you ever happen to want to link against installed libraries in a given directory, LIBDIR, you must either use libtool, and specify the full pathname of the library, or use the '-LLIBDIR' flag during linking and do at least one of the following: - add LIBDIR to the 'LD_LIBRARY_PATH' environment variable during execution - add LIBDIR to the 'LD_RUN_PATH' environment variable during linking - use the '-Wl,-rpath -Wl,LIBDIR' linker flag - have your system administrator add LIBDIR to '/etc/ld.so.conf' See any operating system documentation about shared libraries for more information, such as the ld(1) and ld.so(8) manual pages. ---------------------------------------------------------------------- make[2]: Nothing to be done for 'install-data-am'. make[2]: Leaving directory '/home/fgit/tslib/plugins' make[1]: Leaving directory '/home/fgit/tslib/plugins' Making install in tests make[1]: Entering directory '/home/fgit/tslib/tests' CC ts_test.o CC testutils.o CC font_8x8.o CC font_8x16.o CC fbutils-linux.o CCLD ts_test CC ts_test_mt.o CCLD ts_test_mt CC ts_calibrate.o CCLD ts_calibrate CC ts_print.o CCLD ts_print CC ts_print_mt.o CCLD ts_print_mt CC ts_print_raw.o CCLD ts_print_raw CC ts_harvest.o CCLD ts_harvest CC ts_finddev.o CCLD ts_finddev CC ts_verify.o CCLD ts_verify make[2]: Entering directory '/home/fgit/tslib/tests' /bin/mkdir -p '/home/fgit/libts/bin' /bin/bash ../libtool --mode=install /usr/bin/install -c ts_test ts_test_mt ts_calibrate ts_print ts_print_mt ts_print_raw ts_harvest ts_finddev ts_verify '/home/fgit/libts/bin' libtool: install: /usr/bin/install -c .libs/ts_test /home/fgit/libts/bin/ts_test libtool: install: /usr/bin/install -c .libs/ts_test_mt /home/fgit/libts/bin/ts_test_mt libtool: install: /usr/bin/install -c .libs/ts_calibrate /home/fgit/libts/bin/ts_calibrate libtool: install: /usr/bin/install -c .libs/ts_print /home/fgit/libts/bin/ts_print libtool: install: /usr/bin/install -c .libs/ts_print_mt /home/fgit/libts/bin/ts_print_mt libtool: install: /usr/bin/install -c .libs/ts_print_raw /home/fgit/libts/bin/ts_print_raw libtool: install: /usr/bin/install -c .libs/ts_harvest /home/fgit/libts/bin/ts_harvest libtool: install: /usr/bin/install -c .libs/ts_finddev /home/fgit/libts/bin/ts_finddev libtool: install: /usr/bin/install -c .libs/ts_verify /home/fgit/libts/bin/ts_verify make[2]: Nothing to be done for 'install-data-am'. make[2]: Leaving directory '/home/fgit/tslib/tests' make[1]: Leaving directory '/home/fgit/tslib/tests' Making install in tools make[1]: Entering directory '/home/fgit/tslib/tools' CC ts_uinput.o CCLD ts_uinput make[2]: Entering directory '/home/fgit/tslib/tools' /bin/mkdir -p '/home/fgit/libts/bin' /bin/bash ../libtool --mode=install /usr/bin/install -c ts_uinput '/home/fgit/libts/bin' libtool: install: /usr/bin/install -c .libs/ts_uinput /home/fgit/libts/bin/ts_uinput make[2]: Nothing to be done for 'install-data-am'. make[2]: Leaving directory '/home/fgit/tslib/tools' make[1]: Leaving directory '/home/fgit/tslib/tools' Making install in doc make[1]: Entering directory '/home/fgit/tslib/doc' make[2]: Entering directory '/home/fgit/tslib/doc' make[2]: Nothing to be done for 'install-exec-am'. /bin/mkdir -p '/home/fgit/libts/share/man/man1' /usr/bin/install -c -m 644 ts_test.1 ts_test_mt.1 ts_calibrate.1 ts_uinput.1 ts_print.1 ts_print_raw.1 ts_print_mt.1 ts_finddev.1 ts_harvest.1 ts_verify.1 '/home/fgit/libts/share/man/man1' /bin/mkdir -p '/home/fgit/libts/share/man/man3' /usr/bin/install -c -m 644 ts_read.3 ts_read_mt.3 ts_read_raw.3 ts_read_raw_mt.3 ts_open.3 ts_close.3 ts_config.3 ts_setup.3 ts_libversion.3 '/home/fgit/libts/share/man/man3' /bin/mkdir -p '/home/fgit/libts/share/man/man5' /usr/bin/install -c -m 644 ts.conf.5 '/home/fgit/libts/share/man/man5' make[2]: Leaving directory '/home/fgit/tslib/doc' make[1]: Leaving directory '/home/fgit/tslib/doc' make[1]: Entering directory '/home/fgit/tslib' make[2]: Entering directory '/home/fgit/tslib' make[2]: Nothing to be done for 'install-exec-am'. /bin/mkdir -p '/home/fgit/libts/lib/pkgconfig' /usr/bin/install -c -m 644 tslib.pc '/home/fgit/libts/lib/pkgconfig' make[2]: Leaving directory '/home/fgit/tslib' make[1]: Leaving directory '/home/fgit/tslib'@MhM93 said in my cross compiler has error.tslib install but has error:
/home/fgit/libts/lib/libts.so.0.7.0
this is the lib (look for "libtool: install: /usr/bin/install -c .libs/libts.so.0.7.0 /home/fgit/libts/lib/libts.so.0.7.0" in the install log). So, you need to add /home/fgit/libts/lib/ to your pro file:LIBS += -L/home/fgit/libts/lib -ltslibWhen building in home directory there is no need for sudo when calling configure. Why do you think you need sudo?
-
when I did not use sudo this error display:
fgit@ubuntu:~/tslib$ ./configure --host=arm-linux --prefix=/home/fgit/libts --enable- shared=yes --enable-static=no checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for arm-linux-strip... arm-none-linux-gnueabihf-strip checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... no checking for mawk... mawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether make supports nested variables... (cached) yes checking build system type... x86_64-pc-linux-gnu checking host system type... arm-unknown-linux-gnu checking for arm-linux-gcc... arm-none-linux-gnueabihf-gcc checking whether the C compiler works... no configure: error: in `/home/fgit/tslib': configure: error: C compiler cannot create executables See `config.log' for more detailsI dont know why?
I use that lib in my .pro file###################################################################### # Automatically generated by qmake (2.01a) Wed May 10 21:39:17 2017 ###################################################################### TEMPLATE = app TARGET = DEPENDPATH += . INCLUDEPATH += . LIBS += -L/home/fgit/libts/lib -ltslib # Input SOURCES += main.cppthis error
git@ubuntu:~/helloqt$ make arm-linux-g++ -Wl,-rpath-link,/tmp/FriendlyARM/nanopi2/libs/usr/lib -Wl,-O1 -Wl,-rpath,/usr/local/Trolltech/QtEmbedded-4.8.6-arm/lib -o helloqt main.o -L/tmp/FriendlyARM/nanopi2/libs/usr/lib -L/usr/local/Trolltech/QtEmbedded-4.8.6-arm/lib -L/home/fgit/libts/lib -ltslib -lQtGui -L/usr/local/Trolltech/QtEmbedded-4.8.6-arm/lib -L/tmp/FriendlyARM/nanopi2/libs/usr/lib -lQtNetwork -lQtCore -lpthread /opt/FriendlyARM/toolchain/4.9.3/lib/gcc/arm-cortexa9-linux-gnueabihf/4.9.3/../../../../arm-cortexa9-linux-gnueabihf/bin/ld.bfd: cannot find -ltslib collect2: error: ld returned 1 exit status Makefile:103: recipe for target 'helloqt' failed make: *** [helloqt] Error 1I change .pro to this and this is the error:
###################################################################### # Automatically generated by qmake (2.01a) Wed May 10 21:39:17 2017 ###################################################################### TEMPLATE = app TARGET = DEPENDPATH += . INCLUDEPATH += . LIBS += -L/home/fgit/libts/lib -lts # Input SOURCES += main.cpp
-
Then there's something messed up with your cross-compiler installation. You shouldn't need to be root to cross-compile.
First thing ensure that you are doing that from a clean state. Then check the complete log as to why the configure script can't use the cross-compiler properly.
-
when I did not use sudo this error display:
fgit@ubuntu:~/tslib$ ./configure --host=arm-linux --prefix=/home/fgit/libts --enable- shared=yes --enable-static=no checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for arm-linux-strip... arm-none-linux-gnueabihf-strip checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... no checking for mawk... mawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether make supports nested variables... (cached) yes checking build system type... x86_64-pc-linux-gnu checking host system type... arm-unknown-linux-gnu checking for arm-linux-gcc... arm-none-linux-gnueabihf-gcc checking whether the C compiler works... no configure: error: in `/home/fgit/tslib': configure: error: C compiler cannot create executables See `config.log' for more detailsI dont know why?
I use that lib in my .pro file###################################################################### # Automatically generated by qmake (2.01a) Wed May 10 21:39:17 2017 ###################################################################### TEMPLATE = app TARGET = DEPENDPATH += . INCLUDEPATH += . LIBS += -L/home/fgit/libts/lib -ltslib # Input SOURCES += main.cppthis error
git@ubuntu:~/helloqt$ make arm-linux-g++ -Wl,-rpath-link,/tmp/FriendlyARM/nanopi2/libs/usr/lib -Wl,-O1 -Wl,-rpath,/usr/local/Trolltech/QtEmbedded-4.8.6-arm/lib -o helloqt main.o -L/tmp/FriendlyARM/nanopi2/libs/usr/lib -L/usr/local/Trolltech/QtEmbedded-4.8.6-arm/lib -L/home/fgit/libts/lib -ltslib -lQtGui -L/usr/local/Trolltech/QtEmbedded-4.8.6-arm/lib -L/tmp/FriendlyARM/nanopi2/libs/usr/lib -lQtNetwork -lQtCore -lpthread /opt/FriendlyARM/toolchain/4.9.3/lib/gcc/arm-cortexa9-linux-gnueabihf/4.9.3/../../../../arm-cortexa9-linux-gnueabihf/bin/ld.bfd: cannot find -ltslib collect2: error: ld returned 1 exit status Makefile:103: recipe for target 'helloqt' failed make: *** [helloqt] Error 1I change .pro to this and this is the error:
###################################################################### # Automatically generated by qmake (2.01a) Wed May 10 21:39:17 2017 ###################################################################### TEMPLATE = app TARGET = DEPENDPATH += . INCLUDEPATH += . LIBS += -L/home/fgit/libts/lib -lts # Input SOURCES += main.cpp@MhM93 said in my cross compiler has error.tslib install but has error:
I change .pro to this and this is the error:
What is the error?
Did you rerun qmake after changing the pro file? -
@jsulm :yes, I change .pro and and run qmake and then make command. the error is in the picture
@SGaist I want to run another new ubuntu to install of them from the first. all of the things need /usr/ directory should come with sudo command. so my compiler install with sudo command. I decide to do all steps again with new ubuntu. (this is my 3rd ubuntu :D ) I wish I canH.Ghassami
-
@jsulm :yes, I change .pro and and run qmake and then make command. the error is in the picture
@SGaist I want to run another new ubuntu to install of them from the first. all of the things need /usr/ directory should come with sudo command. so my compiler install with sudo command. I decide to do all steps again with new ubuntu. (this is my 3rd ubuntu :D ) I wish I can -
git@ubuntu:~/helloqt$ make arm-linux-g++ -Wl,-rpath-link,/tmp/FriendlyARM/nanopi2/libs/usr/lib -Wl,-O1 -Wl,-rpath,/usr/local/Trolltech/QtEmbedded-4.8.6-arm/lib -o helloqt main.o -L/tmp/FriendlyARM/nanopi2/libs/usr/lib -L/usr/local/Trolltech/QtEmbedded-4.8.6-arm/lib -L/home/fgit/libts/lib -ltslib -lQtGui -L/usr/local/Trolltech/QtEmbedded-4.8.6-arm/lib -L/tmp/FriendlyARM/nanopi2/libs/usr/lib -lQtNetwork -lQtCore -lpthread /home/fgit/libts/libts.so:file not recognized:File format not recognized collect2: error: ld returned 1 exit status Makefile:103: recipe for target 'helloqt' failed make: *** [helloqt] Error 1that is the error. when I extract the zip file they placed in /usr/local/ directory. I can not change the directory. This toolchain is https://www.mediafire.com/folder/ilkcy37otd7il/NanoPi2Board#a0l72ygtz0797 that I download and install it
