Access to the user interface

SGaist

The debugger is your friend ;)

since you wrote it crashes here

@MyFxhnn -> ui -> itsText->clear();@

Are you sure everything is valid ?

leon2225

No that problem is fixed.
Also the debugger doesn't say anything, the only problem is, that the function openContent() doesn't write the data into itsContent ..

@bool Data::openContent(){
QString fileName = QFileDialog::getOpenFileName(MyFxhnn, tr("Inhalt öffnen"), QString(),
tr("Fxhnn Content Files (*.FXHNNCON)"));
QFile file(fileName);
if(!file.open(QIODevice::ReadOnly)){
QMessageBox::critical(MyFxhnn, tr("Error"), tr("Could not open file"));
return false;
}
QTextStream in(&file);
in >> itsContent;
printItsContent();
file.close();

    if(itsContent != MyFxhnn -> ui -> itsText -> toPlainText()){
        QMessageBox::critical(MyFxhnn, tr("Error"), tr("Fehler beim Öffnen, Data != Textfeld"));
        return false;
    }



return true;

}@

Leon

SGaist

From your code, I wouldn't expect openContent to write anything. You open the selected file in ReadOnly mode and you read from it after that.

leon2225

yea I meant that the function has to "write" the data from the stream into the variable ... but I don't know, where there should be the bug :/

SGaist

Ok, so you mean that "itsContent" doesn't receive the content of the file ?

Following your code printItsContent just clears the itsText widget content so when you compare the content of itsText to itsContent's value, your test will only succeed if itsContent is empty.

leon2225

I've changed that ... a few days ago :D
I'll post the new code .. :
data.h
@#ifndef DATA_H
#define DATA_H

#include <QWidget>
#include "fxhnn.h"
#include "ui_fxhnn.h"
#include <cstdlib>
#include <limits.h>
#include <QString>
#include <QFileDialog>
#include <QFile>
#include <QMessageBox>
#include <QTextStream>
#include <QDataStream>

class Fxhnn;

class Data : public QWidget
{
Q_OBJECT

Fxhnn *MyFxhnn;

public:
explicit Data(Fxhnn*);
~Data();

    //Zugriffe auf den Inhalt
QString getItsContent();
void printItsContent();
void setItsContent( QString newContent);
void readItsContent();
void reset();


    //Speichern der Daten
bool saveKeyAndMeta(bool customFileName = 0);
bool openKeyAndMeta(bool customFileName = 0);
bool saveContent(bool customFileName = 0);
bool openContent(bool customFileName = 0);
bool saveAll(bool customFileName = 0);
bool openAll(bool customFileName = 0);

signals:

private:
qint64 itsKey;
QString itsContent;
ushort itsShuffleLevel;
ushort itsEncryptLevel;
QString itsKeyFilename;
QString itsContentFilename;
};

#endif // DATA_H
@

data.cpp:
@#include "data.h"

Data::Data(Fxhnn * pFxhnn) : MyFxhnn(pFxhnn),itsEncryptLevel(0), itsShuffleLevel(0)
{
itsKey = rand() % LONG_MAX;
setItsEncryptLevel(0);
}

Data::~Data()
{

}

//Zugriffe auf itsContent

void Data::printItsContent(){
MyFxhnn -> ui -> itsText->clear();
MyFxhnn -> ui -> itsText -> setPlainText(itsContent);
setItsEncryptLevel(0);
setItsShuffleLevel(0);
return;
}

void Data::setItsContent(QString newContent){
itsContent = newContent;
return;
}

void Data::readItsContent(){
itsContent = MyFxhnn -> ui -> itsText -> toPlainText();
return;
}

//Zugriffe auf itsKey

qint64 Data::getItsKey(){
return itsKey;
}

void Data::setItsKey(qint64 newKey){
itsKey = newKey;
return;
}

void Data::generateItsKey(){
itsKey = rand() % USHRT_MAX;
return;
}

//Zugriffe auf das Level der Verschlüsslung
void Data::setItsEncryptLevel( short upDownGrade){
itsEncryptLevel = itsEncryptLevel + upDownGrade;

if(itsEncryptLevel <= 0){
    MyFxhnn -> ui -> itsIsEncrypted -> setText("Decrypted");
    MyFxhnn -> ui -> itsIsEncrypted -> setStyleSheet("QLabel {color : #CC0304; }");
}
else{
    if(itsEncryptLevel > 0){
        QString Out = "Encrypt Level ";
        Out.append(QString("%1").arg(itsEncryptLevel));
        MyFxhnn -> ui-> itsIsEncrypted-> setText(Out);
    }
    else
        MyFxhnn -> ui -> itsIsEncrypted -> setText("Encrypted");
    MyFxhnn -> ui -> itsIsEncrypted -> setStyleSheet("QLabel {color : #4ECC39; }");
}

}

ushort Data::getItsEncryptLevel(){
return itsEncryptLevel;
}

//Daten Speichern und öffnen

bool Data::saveKeyAndMeta(bool customFileName){
if(itsKeyFilename.isEmpty() || customFileName)
itsKeyFilename = QFileDialog::getSaveFileName(MyFxhnn, tr("Schlüssel Speichern"), QString(), tr("Fxhnn Key Files (*.FXHNNKEY)"));
if(!itsKeyFilename.isEmpty()){
QFile file(itsKeyFilename);
if(!file.open(QIODevice::WriteOnly)){
QMessageBox::critical(0, tr("Error"), tr("Could not save key"));
return false;
}
QDataStream stream(&file);
stream << itsKey << itsEncryptLevel << itsShuffleLevel;
file.close();
}
return true;
}

bool Data::saveContent(bool customFileName){
if(itsContentFilename.isEmpty() || customFileName)
itsContentFilename = QFileDialog::getSaveFileName(0, tr("Text Speichern"), QString(), tr("Fxhnn Content Files (*.txt)"));

if(!itsContentFilename.isEmpty()){
    QFile file&#40;itsContentFilename&#41;;
    if(!file.open(QIODevice::WriteOnly)){
        QMessageBox::critical(0, tr("Error"), tr("Could not save file"));
        return false;
    }
    QTextStream stream(&file);
    stream << itsContent;
    file.close();
}
return true;

}

bool Data::saveAll(bool customFileName){
bool content = saveContent(customFileName);
bool keyAndMeta = saveKeyAndMeta(customFileName);

if(content && keyAndMeta)
    return true;

return false;

}

bool Data::openKeyAndMeta( bool customFileName){
if(itsKeyFilename.isEmpty() || customFileName )
itsKeyFilename = QFileDialog::getOpenFileName(0, tr("Schlüssel Öffnen"), QString(), tr("Fxhnn Key Files (*.FXHNNKEY)"));
if(!itsKeyFilename.isEmpty()){
QFile file(itsKeyFilename);
if(!file.open(QIODevice::ReadOnly)){
QMessageBox::critical(0, tr("Error"), tr("Could not open file"));
return false;
}
QDataStream in(&file);
in >> itsKey >> itsEncryptLevel >> itsShuffleLevel;
file.close();
printItsContent();
}
return true;
}

bool Data::openContent(bool customFileName){
if(itsContentFilename.isEmpty() || customFileName)
itsContentFilename= QFileDialog::getOpenFileName(MyFxhnn, tr("Inhalt öffnen"), QString(), tr("Fxhnn Content Files (*.txt)"));

if(!itsContentFilename.isEmpty()){
    QFile file&#40;itsContentFilename&#41;;
    if(!file.open(QIODevice::ReadOnly)){
        QMessageBox::critical(MyFxhnn, tr("Error"), tr("Could not open file"));
        return false;
    }
    QTextStream in(&file);
    setItsContent(in.readAll());
    printItsContent();
    file.close();

    if((itsContent != MyFxhnn -> ui -> itsText -> toPlainText()) || itsContent == ""){
        QMessageBox::critical(MyFxhnn, tr("Error"), tr("Fehler beim Öffnen, Data != Textfeld"));
        return false;
    }
}


return true;

}

bool Data::openAll(bool customFileName){
bool content = openContent(customFileName);
bool keyAndMeta = openKeyAndMeta(customFileName);

if(content && keyAndMeta)
    return true;

return false;

}
@

SGaist

So is it working as you expect it to ?

leon2225

No it isn't ... it still have the problem that it couldn't read the data from the files.

SGaist

Rather than
@
QTextStream in(&file);
setItsContent(in.readAll());@

Why not just:
@
setItsContent(file.readAll());
@

In any case, are you sure that your file is not empty ?

leon2225

That doesn't work... And the file isn't empty

SGaist

Did you check what file.readAll() contains ?

since setItsContent only assign the parameter value to your itsContent member variable why not just do:

@itsContent = file.readAll()@

?

By the way, you should use const QString& in your setItsContent function, that will avoid unnecessary copies.

leon2225

Okey ehm file.readAll() return the right content of the file, the problem is, that it doesn't convert it into QString. readAll() gives back a QByteArray wich normaly could be converted in QString with for example:
@itsContent = QString(file.readAll());@

But it doesn't ...

here is the function again:
@bool Data::openContent(bool customFileName){
if(itsContentFilename.isEmpty() || customFileName)
itsContentFilename= QFileDialog::getOpenFileName(MyFxhnn, tr("Inhalt öffnen"), QString(), tr("Fxhnn Content Files (*.txt)"));

if(!itsContentFilename.isEmpty()){
    QFile file&#40;itsContentFilename&#41;;
    if(!file.open(QIODevice::ReadOnly)){
        QMessageBox::critical(MyFxhnn, tr("Error"), tr("Could not open file"));
        return false;
    }
    QTextStream in(&file);
    QMessageBox::information(MyFxhnn, "Content of readAll(", file.readAll());
    itsContent = QString(file.readAll());
    QMessageBox::information(MyFxhnn, "Content of itsContent", QString(file.readAll()));
    printItsContent();
    file.close();

    if((itsContent != MyFxhnn -> ui -> itsText -> toPlainText()) || itsContent == ""){
        QMessageBox::critical(MyFxhnn, tr("Error"), tr("Fehler beim Öffnen, Data != Textfeld"));
        return false;
    }
}


return true;

}@

The Message "Content of readAll()" gives back the right content the other message return nothing an the last error message appears.

leon2225

Now it's working a 'bit'.
It is able to read the file and print it into the output, BUT it doesn't save onicode ... and I need unicode so we have to find an other solution :/ :D

leon2225

Now it's working a 'bit'.
It is able to read the file and print it into the output, BUT it doesn't save onicode ... and I need unicode so we have to find an other solution :/ :D
@bool Data::openContent(bool customFileName){
if(itsContentFilename.isEmpty() || customFileName)
itsContentFilename= QFileDialog::getOpenFileName(MyFxhnn, tr("Inhalt öffnen"), QString(), tr("Fxhnn Content Files (*.txt)"));

if(!itsContentFilename.isEmpty()){
    QFile file&#40;itsContentFilename&#41;;
    if(!file.open(QIODevice::ReadOnly)){
        QMessageBox::critical(MyFxhnn, tr("Error"), tr("Could not open file"));
        return false;
    }
    //QTextStream in(&file);
    //QMessageBox::information(MyFxhnn, "Inhalt von readAll()", file.readAll());
    QByteArray tempString = file.readAll();
    itsContent = tempString;
    QMessageBox::information(MyFxhnn, "Inhalt von itsContent", itsContent);
    printItsContent();
    file.close();

    if((itsContent != MyFxhnn -> ui -> itsText -> toPlainText()) || itsContent == ""){
        QMessageBox::critical(MyFxhnn, tr("Error"), tr("Fehler beim Öffnen, Data != Textfeld"));
        return false;
    }
}


return true;

}@

and here are the printItsContent():
@void Data::printItsContent(){
//MyFxhnn -> ui -> itsText->clear(); <- If I uncomment this line it clear the output text, but it can't set it again
MyFxhnn -> ui -> itsText -> setPlainText(itsContent);
setItsEncryptLevel(0);
setItsShuffleLevel(0);
return;
}@

SGaist

That's the kind of detail that's good to share.

Then it seems that you should use QTextCodec

leon2225

OK!
now it works, but only with textstream, but that's enough.

Thank you!! :)

SGaist

What do you mean by "only with textstream" ?