A camera problem.

jenya7

@jenya7 How did you do the Linux installation, did you include the multimedia libraries?

this is a log
sudo apt-get update
sudo apt-get upgrade

//Buster
sudo apt-get install qt5-default
//Bullseye
//sudo apt install qtbase5-dev qtchooser qt5-qmake qtbase5-dev-tools
sudo apt-get install qtcreator
sudo apt-get install qtdeclarative5-dev
sudo apt-get install qtconnectivity5-dev //for bluetooth
sudo apt-get install qtbase5-examples
sudo apt-get install qtbase5-doc-html
To upgrade
sudo apt-get install qt5-qmake
//for Debian ?
qtbase5-dev
qtchooser
qt5-qmake
qtbase5-dev-tools

Can't see explicit multimedia installation? should I add? how it would be?

JonB

@jenya7
After typing apt-get install followed by qt or qt5 did you press the Tab key (twice)?

jenya7

@JonB said in A camera problem.:

@jenya7
After typing apt-get install followed by qt or qt5 did you press the Tab key (twice)?

thank you
sudo apt-get install qtmultimedia5-dev
it works. now all libraries are available.

jenya7

This is my constructor

Camera::Camera(QObject *parent) : QObject(parent)
{
    //Camera devices:

    QActionGroup *videoDevicesGroup = new QActionGroup(this);
    videoDevicesGroup->setExclusive(true);
    const QList<QCameraInfo> availableCameras = QCameraInfo::availableCameras();
    for (const QCameraInfo &cameraInfo : availableCameras)
 {
        QAction *videoDeviceAction = new QAction(cameraInfo.description(), videoDevicesGroup);
        videoDeviceAction->setCheckable(true);
        videoDeviceAction->setData(QVariant::fromValue(cameraInfo));
        if (cameraInfo == QCameraInfo::defaultCamera())
            videoDeviceAction->setChecked(true);
    }

    connect(videoDevicesGroup, &QActionGroup::triggered, this, &Camera::updateCameraDevice);

    setCamera(QCameraInfo::defaultCamera());
}

On availableCameras I get <0 items>.

If I check the camera is alive
raspistill -o Desktop/image.jpg
it appears and I see a snapshot on the desktop.

Does the library work with a Raspberry Pi camera at all? May be I'm beating a dead horse?

jsulm

@jenya7 I think you will also need to install GStreamer plug-ins. On Linux Qt uses GStreamer for multimedia.

jenya7

@jsulm said in A camera problem.:

@jenya7 I think you will also need to install GStreamer plug-ins. On Linux Qt uses GStreamer for multimedia.

when I run
dpkg -l | grep gstreamer
I see gstreamer installed.

jsulm

@jenya7 said in A camera problem.:

I see gstreamer installed

What exactly is installed? There are many GStreamer plug-ins which may be needed.

jenya7

@jsulm said in A camera problem.:

@jenya7 said in A camera problem.:

I see gstreamer installed

What exactly is installed? There are many GStreamer plug-ins which may be needed.

this is the list

ii  gstreamer1.0-alsa:armhf               1.14.4-2+deb10u1                        armhf        GStreamer plugin for ALSA
ii  gstreamer1.0-gtk3:armhf               1.14.4-1+rpt1+deb10u1                   armhf        GStreamer plugin for GTK+3
ii  gstreamer1.0-libav:armhf              1.15.0.1+git20180723+db823502-2+deb10u1 armhf        libav plugin for GStreamer
ii  gstreamer1.0-omx                      1.14.4-1+rpt1                           armhf        GStreamer OpenMAX plugins
ii  gstreamer1.0-omx-rpi                  1.14.4-1+rpt1                           armhf        OpenMax plugins for GStreamer
ii  gstreamer1.0-omx-rpi-config           1.14.4-1+rpt1                           armhf        OpenMax plugins for GStreamer
ii  gstreamer1.0-plugins-bad:armhf        1.14.4-1+rvt+deb10u2                    armhf        GStreamer plugins from the "bad" set
ii  gstreamer1.0-plugins-base:armhf       1.14.4-2+deb10u1                        armhf        GStreamer plugins from the "base" set
ii  gstreamer1.0-plugins-good:armhf       1.14.4-1+rpt1+deb10u1                   armhf        GStreamer plugins from the "good" set
ii  gstreamer1.0-x:armhf                  1.14.4-2+deb10u1                        armhf        GStreamer plugins for X11 and Pango
ii  libgstreamer-gl1.0-0:armhf            1.14.4-2+deb10u1                        armhf        GStreamer GL libraries
ii  libgstreamer-plugins-bad1.0-0:armhf   1.14.4-1+rvt+deb10u2                    armhf        GStreamer libraries from the "bad" set
ii  libgstreamer-plugins-base1.0-0:armhf  1.14.4-2+deb10u1                        armhf        GStreamer libraries from the "base" set
ii  libgstreamer1.0-0:armhf               1.14.4-1                                armhf        Core GStreamer libraries and elements
ii  libreoffice-avmedia-backend-gstreamer 1:6.1.5-3+rpi1+deb10u7+rpt1             armhf        GStreamer backend for LibreOffice

I really don't know if it's a complete list or a right version.

jsulm

@jenya7 said in A camera problem.:

or a right version

That depends on the Qt version you're using.
Try to also install gstreamer1.0-plugins-ugly, but I don't know whether this will help.

jenya7

@jsulm said in A camera problem.:

@jenya7 said in A camera problem.:

or a right version

That depends on the Qt version you're using.
Try to also install gstreamer1.0-plugins-ugly, but I don't know whether this will help.

I found it out! It's not enough to install library
sudo apt-get install qtmultimedia5-dev
One should add plugins also
sudo apt-get install libqt5multimedia5-plugins

Now it founds the camera. But how do I refer to it later on? There are no fields like name or id or something
at least on debug level

availableCameras	<1 items>	QList<QCameraInfo>
    [0]	@0x1027c8	QCameraInfo
        d	@0x1027c8	QSharedPointer<QCameraInfoPrivate>
			data	@0x10cd88	QCameraInfoPrivate
			weakref	2	int
			strongref	2	int
	availableCameras@1	<optimized out>	
	cameraInfo	@0x1027c8	QCameraInfo &
		d	@0x1027c8	QSharedPointer<QCameraInfoPrivate>
			data	@0x10cd88	QCameraInfoPrivate
			weakref	2	int
			strongref	2	int
	cameraInfo@1	@0x1027c8	QCameraInfo &
		d	@0x1027c8	QSharedPointer<QCameraInfoPrivate>
			data	@0x10cd88	QCameraInfoPrivate
			weakref	2	int
			strongref	2	int

QCameraInfo::defaultCamera()		QCameraInfo
		d		QSharedPointer<QCameraInfoPrivate>
			data	@0x111438	QCameraInfoPrivate
			weakref	1	int
			strongref	1	int

jsulm

@jenya7 said in A camera problem.:

There are no fields like name or id or something

There is: https://doc.qt.io/qt-5/qcamerainfo.html#deviceName

jenya7

@jsulm said in A camera problem.:

@jenya7 said in A camera problem.:

There are no fields like name or id or something

There is: https://doc.qt.io/qt-5/qcamerainfo.html#deviceName

I see. Thank you. I'll try to get it going.

jenya7

something eluding me
To take a shot

void Camera::takeImage()

Then on

connect(m_imageCapture.data(), &QCameraImageCapture::imageCaptured, this, &Camera::processCapturedImage);

void Camera::processCapturedImage(int requestId, const QImage& img)
{
    Q_UNUSED(requestId);
    QImage scaledImage = 100, 100,
                                    Qt::KeepAspectRatio,
                                    Qt::SmoothTransformation);

    ui->lastImagePreviewLabel->setPixmap(QPixmap::fromImage(scaledImage));

    // Display captured image for 4 seconds.
    displayCapturedImage();
    QTimer::singleShot(4000, this, &Camera::displayViewfinder);
}

But where the image actually stored?

SGaist

Hi,

Unless you configure the capture to capture to file, its just going to be in the buffer. You can still save it yourself though.

jenya7

@SGaist said in A camera problem.:

Hi,

Unless you configure the capture to capture to file, its just going to be in the buffer. You can still save it yourself though.

How do I do that? I see m_imageCapture but no property or method to set a path to a file.
And where the buffer located?

SGaist

The buffer just means it's in memory. You'll get a frame to process and then it's up to you to save it.

jenya7

@SGaist said in A camera problem.:

The buffer just means it's in memory. You'll get a frame to process and then it's up to you to save it.

After

g_camera.SetCaptureMode(QCamera::CaptureMode::CaptureStillImage);
g_camera.takeImage();

Nothing happens. I didn't get to

void Camera::processCapturedImage(int requestId, const QImage& img)

or

void Camera::imageSaved(int id, const QString &fileName)

How do I know where is the image (if it was taken at all)?

jsulm

@jenya7 Did you connect a slot to https://doc.qt.io/qt-5/qcamera.html#errorOccurred to see whether you get any errors? Same for https://doc.qt.io/qt-5/qcameraimagecapture.html#error-1
You can get the cptured image using this signal: https://doc.qt.io/qt-5/qcameraimagecapture.html#imageAvailable

jenya7

@jsulm said in A camera problem.:

@jenya7 Did you connect a slot to https://doc.qt.io/qt-5/qcamera.html#errorOccurred to see whether you get any errors? Same for https://doc.qt.io/qt-5/qcameraimagecapture.html#error-1
You can get the cptured image using this signal: https://doc.qt.io/qt-5/qcameraimagecapture.html#imageAvailable

this is what I have

connect(m_imageCapture.data(), &QCameraImageCapture::readyForCaptureChanged, this, &Camera::readyForCapture);
connect(m_imageCapture.data(), &QCameraImageCapture::imageCaptured, this, &Camera::processCapturedImage);
connect(m_imageCapture.data(), &QCameraImageCapture::imageSaved, this, &Camera::imageSaved);
connect(m_imageCapture.data(), QOverload<int, QCameraImageCapture::Error, const QString &>::of(&QCameraImageCapture::error),
            this, &Camera::displayCaptureError);

jsulm

@jenya7 So, what about trying https://doc.qt.io/qt-5/qcameraimagecapture.html#imageAvailable ?