Combining classes - append class to QMainWindow

[Pl45m4]

@AnneRanch said in Combining classes - append class to QMainWindow:

This post is pretty much repeat of what was already said.

If you look at the time stamps of @Chris-Kawa 's and my post, you will see that they are just 2-3mins or so apart. The moment when I started typing, there was no response... So we both wrote our replies at the same time :)

[Anonymous_Banned275]

I think I have painted myself into a corner.

1. I have QMainWindow with class member BT_TabWidget
   This part works and I can verify the “connect” too

 BT_TabWidget *BT_tab = new BT_TabWidget(this);
  setCentralWidget(BT_tab);
  connect (BT_tab,
           SIGNAL(tabBarClicked(int)),
           this,
            SLOT(MainTestFunction())
           )
           ;

2. In the BT_TabWidget I have promoted “tab” QWidget to
   DeviceDiscoveryDialog - QDialog class
   This part also works and I can actually retrieve / list bluetooth devices.

3. DeviceDiscovwryDialog class has a member class QBluetoothDeviceDiscoveryAgent
   instantiated as
   discoveryAgent = new QbluetoothDeviceDiscoveryAgent();
   discoveryAgent does all the dirty work and it does it well , so far.

Here is MY problem , basically while trying to monitor the working application progress.

1. I cannot use discoveryAgent , have no access to it , as source for “connect”
   I should be able to get intelisense to accept / provide the following
   BT_tab→discoveryAgent....
   But it gives no "discoveryAget" option.

2. I cannot figure out HOW to include SLOT (QMainWindow(….) ) ,
   in “connect” . Again intelisense is of no help and I am not sure if the #1 problem is the cause.
   ( I did try &app (main application) - no go )

I am using "discoveryAgent" within the QbluetoothDeviceDiscoveryAgent to track the bluez "library" and just like to extend it to the main "status bar". It worked prior to implementing the promotion scheme.

I am sorry to drag this discussion, but I keep running into these issues in the process.

[Anonymous_Banned275]

@AnneRanch Here is a thought.
Since promotion works I suspect that promoting QWidget "tab" to "DeviceDiscoveryDialog" is assigning a pointer to the class.
I do not know that pointer, neither does Qt and its intellisence.
Not having access to the unknown pointer I obviously do not have access to "DeviceDiscoveryDialog" variables / methods .

So it is back to QtCreator interaction with QtDesigner - an annoying and BIG issue since I first started looking into Qt.
Perhaps too much behind the scene automation.

I have a small proof.
I can implement promotion to "DeviceDiscoveryDialog" , in dialog, but I have to type /copy it in - no "pull down" control to help me.
However, "DeviceDiscoveryDialog" has to be valid class.
So the QtDesigner have knowledge about the "DeviceDiscoveryDialog", but it cannot be selected via "standard" pull down control.
Unfortunately is it these (little) "gotcha " which keeps project from smooth development and completion.
But it is fun.

[Pl45m4]

@AnneRanch said in Combining classes - append class to QMainWindow:

I cannot use discoveryAgent , have no access to it , as source for “connect”
I should be able to get intelisense to accept / provide the following
BT_tab→discoveryAgent....
But it gives no "discoveryAget" option.

Since discoveryAgent is a var or even a member in your BT_tab widget, you can not just access it from your MainWindow. You could write a getter-function in order to receive a pointer to discoveryAgent inside your MainWindow. You can connect to it afterwards. But there could be better ways in terms of structure. Why you need your agent in MainWindow? You could move every BT task to your BT widget. Then you just need to connect MainWindow and your BT widget for controls. Your Bt widget handles the whole BT stuff.

@AnneRanch said in Combining classes - append class to QMainWindow:

I cannot figure out HOW to include SLOT (QMainWindow(….) ) ,
in “connect” . Again intelisense is of no help and I am not sure if the #1 problem is the cause.
( I did try &app (main application) - no go )

How to include slot MainWindow?

@AnneRanch said in Combining classes - append class to QMainWindow:

connect (BT_tab,
SIGNAL(tabBarClicked(int)),
this,
SLOT(MainTestFunction())
)
;

This doesn't look wrong, except you have an int-passing signal, but no slot, that can take that int value (parameter mismatch). Change slot to MainTestFunction(int) or use default values
(void MainWindow::MainTestFunction(int i = 0){ /* some code */ } )

If you use the new signal and slot syntax (function-based instead of string-based with SIGNAL / SLOT keywords), the autocompleter will find your slots (as long as they got declared correctly)
( https://wiki.qt.io/New_Signal_Slot_Syntax )

connect(BT_tab, &BT_TabWidget::tarBarClicked, this, &MainWindow::MainTestFunction);

This equals your connection above... 1st and 3rd (sender and receiver instance) stay the same.

• Signal = & + Name of class + :: + name of signal
• Slot = & + Name of class + :: + name of slot (after typing :: it should make some suggestions)

[Anonymous_Banned275]

Since discoveryAgent is a var or even a member in your BT_tab widget, you can not just access it from your MainWindow.

Is it not how class relations works?

I have used the "new" connect and it works when the function is declared in QMainWIndow. It helps immensely.

As soon as I can figure out how "bluez" is posting (pairing) error messages I should be able to move them from ( cerr ??) console to main status bar.

Making great progress thanks to this forum.
Appreciate that very much.

[Pl45m4]

@AnneRanch said in Combining classes - append class to QMainWindow:

Is it not how class relations works?

How should MainWindow know about what happens inside BT_TabWidget unless it's declared public?
So if you create a new QBluetoothDeviceDiscoveryAgent somewhere in your BT_TabWidget, MainWindow will not "see" that and can't access it either.
Besides that I would let your BT widget handle all BT connection stuff and dont try to move the BT device- and connection handling to MainWindow. Connect MainWindow with your BT widget and not with everything inside your BT widget class.

// In MainWindow
connect(this, &MainWindow::someSignal, BT_tab, &BT_TabWidget::startDeviceDiscovery);

// ############################

// BT_Widget
// Then search for BT devices in your BT_Widget in "startDeviceDiscovery" slot:

void BT_Widget::startDeviceDiscovery()
{
     QBluetoothDeviceDiscoveryAgent *discoveryAgent = new QBluetoothDeviceDiscoveryAgent(this);
      connect(discoveryAgent, SIGNAL(deviceDiscovered(QBluetoothDeviceInfo)),
            this, SLOT(deviceDiscovered(QBluetoothDeviceInfo)));

       // Start a discovery
       discoveryAgent->start();

      //...

}

https://doc.qt.io/qt-5/qbluetoothdevicediscoveryagent.html#details

Edit:

As I've said, I would not use the getter approach in this case (to access BtDiscoveryAgent), but in general, it would look like this:

Class A.h

#include "A.h"

public:
     Class_A();

     A& getA() { return m_A; }


private:
    A *m_A;

ClassA.cpp

m_A = new A();

ClassB.h

#include "classA.h"

public:
     Class_B() { classA = new ClassA(); } // Creates ClassA instance in ClassB

private:
    ClassA *classA; // Stores pointer to ClassA in ClassB

ClassB.cpp

// get member A from ClassA
A *a = classA->getA();

ClassA ptr in ClassB is used to access public get-function in ClassA, which will return private member A.
Without getA function, ClassB would NOT see A in ClassA, even though you have full access to that instance (ClassA) itself, because A is a private member (= invisible for other classes).

[Anonymous_Banned275]

This will certainly look repetitious to the discussion, but I AM Still having this issue.

All of my "connect" code originally codded in QDialog of btscanner work as expected. No problem.

What I desire is to post a message to QMainWindow "status bar".
In theory , I want to "connect" former object QDialog to object QWidget.

So I am adding another "connect" to the working code - constructor - of DeviceDiscoveryDialog.

The sender SIGNAL object is "ui->scan" - plain "push button" and "ui->scan"
does triple duty as part of mentioned other working "connect".

The "issue" is , and again I asked before , HOW to assign (syntax) receiver object as QMainWindow.
( I believe my otherwise working code structure Main window -> tab widget ->DeviceDiscoveryDialog-> buetooth -QBuletoothDeviceDiscoveryAgent is OK)

`
if(
(bool)
connect( ui->scan,
SIGNAL( sendStatus( const QString & ) ),
&MainWindow_BT(),
SLOT(MainWindow_BT()::displayStatusMessage(const QString & )
)
)
)

Above included code snippet throws this error 

/media/z/DEV_COPY_LABEL/Qt/QT/qtconnectivity/examples/bluetooth/CAT_BT/device.cpp:136: error: taking address of temporary [-fpermissive]
&MainWindow_BT(),
^

What am I doing wrong ? 

PS 
I need to pass message using "connect" which implies, per doc,  I Ishould not be using the "new" connect style to connect functions.  At leas not WITHOUT more knowledge HOW to add parameters ( QString) to the "connect" process functions in new style of connect. 
Maybe  later.

[SGaist]

@AnneRanch said in Combining classes - append class to QMainWindow:

&MainWindow_BT(),

You are creating a temporary object and taking its address.

@AnneRanch said in Combining classes - append class to QMainWindow:

SLOT(MainWindow_BT()::displayStatusMessage(const QString & )

This is wrong as well. It's the slot name that is required.

In any case, this code looks like it's located in a dialog that is likely created any your MainWindow_BT class. Is that correct ? If so, you are doing the connection in the wrong object. Your dialog should send its status and not care who is receiving it. That code should be located in the class that creates and handles your DeviceDiscoveryDialog. Likely your MainWindow_BT class.

Therefore:

connect(pointer_to_dialog, &DeviceDiscoveryDialog::sendStatus, this, &MainWindow_BT::displayStatusMessage);

I do not see in your PS the relation with the new syntax.

[Pl45m4]

@AnneRanch said in Combining classes - append class to QMainWindow:

This will certainly look repetitious to the discussion, but I AM Still having this issue.

But you still make the same mistakes :)

@Pl45m4 said in Combining classes - append class to QMainWindow:

connect(BT_tab, &BT_TabWidget::tarBarClicked, this, &MainWindow::MainTestFunction);

It's always this structure. So no () - function calls in second or fourth argument allowed.

My Get-Example was to illustrate how it would look like, when accessing private members from another class.

@AnneRanch said in Combining classes - append class to QMainWindow:

I need to pass message using "connect" which implies, per doc, I Ishould not be using the "new" connect style to connect functions. At leas not WITHOUT more knowledge HOW to add parameters ( QString) to the "connect" process functions in new style of connect.
Maybe later.

You dont need to use arguments in connection statement. The new syntax will do that for you. If your signal passes QString and your slot accepts QString, it just works. So you don't have to worry about types in your connection, if they match, everything's fine.

This

connect(test, SIGNAL(someSignal(QString)), this, SLOT(randomFnctn(QString)));

Or even that:

connect(test, SIGNAL(someSignal(int, qreal, QVector<int>)), this, SLOT(randomFnctn(int, qreal, QVector<int>)));

Equals this:

connect(test, &TestWidget::someSignal, this, &MainWindow::randomFnctn);

[Anonymous_Banned275]

@Pl45m4 said in Combining classes - append class to QMainWindow:

Equals this:
connect(test, &TestWidget::someSignal, this, &MainWindow::randomFnctn);

Please note - I may be repeating my errors but I do not post just to get "cut and paste" confirmations of my posts.
I am hoping somebody will help find / lead me to a solution.
.

Here is a faulty - need of solution - code snippet .

DeviceDiscoveryDialog::DeviceDiscoveryDialog(QWidget *parent)
    :   QDialog(parent), localDevice(new QBluetoothLocalDevice),
      ui(new Ui_DeviceDiscovery)
{
   ui->setupUi(this);
   discoveryAgent = new QBluetoothDeviceDiscoveryAgent();
// working connect 
    connect(ui->scan, SIGNAL(clicked()), this, SLOT(startScan()));
// faulty connect 
both sendStatus and displayStatusMessage are given/ completed by intellisnese - they exists,  and are valid BUT 
this code throws  an error 
    connect(ui->scan,
            &DeviceDiscoveryDialog::sendStatus,
            this,
            &MainWindow_BT::displayStatusMessage);

**Compiler output AFTERT "no matching function" error

&MainWindow_BT::displayStatusMessage);

is declared**

This is just " connect" error, I have NOT implemented the actual "emit" to use it. Not until it passes by complier.

../CAT_BT/device.cpp: In constructor 'DeviceDiscoveryDialog::DeviceDiscoveryDialog(QWidget*)':
../CAT_BT/device.cpp:121:49: error: no matching function for call to 'DeviceDiscoveryDialog::connect(QPushButton*&, void (DeviceDiscoveryDialog::*)(const QString&), DeviceDiscoveryDialog*, void (MainWindow_BT::*)(const QString&))'
             &MainWindow_BT::displayStatusMessage);
                                                 ^
In file included from /usr/include/x86_64-linux-gnu/qt5/QtCore/qvariant.h:45:0,
                 from /usr/include/x86_64-linux-gnu/qt5/QtCore/QVariant:1,
                 from .uic/ui_device.h:12,
                 from ../CAT_BT/device.h:56,
                 from ../CAT_BT/device.cpp:51:
/usr/include/x86_64-linux-gnu/qt5/QtCore/qobject.h:196:36: note: candidate: static QMetaObject::Connection QObject::connect(const QObject*, const char*, const QObject*, const char*, Qt::ConnectionType)
     static QMetaObject::Connection connect(const QObject *sender, const char *signal,
                                    ^
/usr/include/x86_64-linux-gnu/qt5/QtCore/qobject.h:196:36: note:   no known conversion for argument 2 from 'void (DeviceDiscoveryDialog::*)(const QString&)' to 'const char*'
/usr/include/x86_64-linux-gnu/qt5/QtCore/qobject.h:199:36: note: candidate: static QMetaObject::Connection QObject::connect(const QObject*, const QMetaMethod&, const QObject*, const QMetaMethod&, Qt::ConnectionType)
     static QMetaObject::Connection connect(const QObject *sender, const QMetaMethod &signal,
                                    ^
/usr/include/x86_64-linux-gnu/qt5/QtCore/qobject.h:199:36: note:   no known conversion for argument 2 from 'void (DeviceDiscoveryDialog::*)(const QString&)' to 'const QMetaMethod&'
/usr/include/x86_64-linux-gnu/qt5/QtCore/qobject.h:475:32: note: candidate: QMetaObject::Connection QObject::connect(const QObject*, const char*, const char*, Qt::ConnectionType) const
 inline QMetaObject::Connection QObject::connect(const QObject *asender, const char *asignal,
                                ^
/usr/include/x86_64-linux-gnu/qt5/QtCore/qobject.h:475:32: note:   no known conversion for argument 2 from 'void (DeviceDiscoveryDialog::*)(const QString&)' to 'const char*'
/usr/include/x86_64-linux-gnu/qt5/QtCore/qobject.h:213:43: note: candidate: static QMetaObject::Connection QObject::connect(const typename QtPrivate::FunctionPointer<Func>::Object*, Func1, const typename QtPrivate::FunctionPointer<Func2>::Object*, Func2, Qt::ConnectionType) [with Func1 = void (DeviceDiscoveryDialog::*)(const QString&); Func2 = void (MainWindow_BT::*)(const QString&); typename QtPrivate::FunctionPointer<Func>::Object = DeviceDiscoveryDialog; typename QtPrivate::FunctionPointer<Func2>::Object = MainWindow_BT]
     static inline QMetaObject::Connection connect(const typename QtPrivate::FunctionPointer<Func1>::Object *sender, Func1 signal,
                                           ^
/usr/include/x86_64-linux-gnu/qt5/QtCore/qobject.h:213:43: note:   no known conversion for argument 1 from 'QPushButton*' to 'const Object* {aka const DeviceDiscoveryDialog*}'
/usr/include/x86_64-linux-gnu/qt5/QtCore/qobject.h:245:13: note: candidate: template<class Func1, class Func2> static typename QtPrivate::QEnableIf<((int)(QtPrivate::FunctionPointer<Func2>::ArgumentCount) >= 0), QMetaObject::Connection>::Type QObject::connect(const typename QtPrivate::FunctionPointer<Func>::Object*, Func1, Func2)
             connect(const typename QtPrivate::FunctionPointer<Func1>::Object *sender, Func1 signal, Func2 slot)
             ^
/usr/include/x86_64-linux-gnu/qt5/QtCore/qobject.h:245:13: note:   template argument deduction/substitution failed:
../CAT_BT/device.cpp:121:49: note:   candidate expects 3 arguments, 4 provided
             &MainWindow_BT::displayStatusMessage);
                                                 ^
In file included from /usr/include/x86_64-linux-gnu/qt5/QtCore/qvariant.h:45:0,
                 from /usr/include/x86_64-linux-gnu/qt5/QtCore/QVariant:1,
                 from .uic/ui_device.h:12,
                 from ../CAT_BT/device.h:56,
                 from ../CAT_BT/device.cpp:51:
/usr/include/x86_64-linux-gnu/qt5/QtCore/qobject.h:254:13: note: candidate: template<class Func1, class Func2> static typename QtPrivate::QEnableIf<(((int)(QtPrivate::FunctionPointer<Func2>::ArgumentCount) >= 0) && (! QtPrivate::FunctionPointer<Func2>::IsPointerToMemberFunction)), QMetaObject::Connection>::Type QObject::connect(const typename QtPrivate::FunctionPointer<Func>::Object*, Func1, const QObject*, Func2, Qt::ConnectionType)
             connect(const typename QtPrivate::FunctionPointer<Func1>::Object *sender, Func1 signal, const QObject *context, Func2 slot,
             ^
/usr/include/x86_64-linux-gnu/qt5/QtCore/qobject.h:254:13: note:   template argument deduction/substitution failed:
/usr/include/x86_64-linux-gnu/qt5/QtCore/qobject.h: In substitution of 'template<class Func1, class Func2> static typename QtPrivate::QEnableIf<(((int)(QtPrivate::FunctionPointer<Func2>::ArgumentCount) >= 0) && (! QtPrivate::FunctionPointer<Func2>::IsPointerToMemberFunction)), QMetaObject::Connection>::Type QObject::connect(const typename QtPrivate::FunctionPointer<Func>::Object*, Func1, const QObject*, Func2, Qt::ConnectionType) [with Func1 = void (DeviceDiscoveryDialog::*)(const QString&); Func2 = void (MainWindow_BT::*)(const QString&)]':
../CAT_BT/device.cpp:121:49:   required from here
/usr/include/x86_64-linux-gnu/qt5/QtCore/qobject.h:254:13: error: invalid use of incomplete type 'struct QtPrivate::QEnableIf<false, QMetaObject::Connection>'
In file included from /usr/include/x86_64-linux-gnu/qt5/QtCore/qatomic.h:34:0,
                 from /usr/include/x86_64-linux-gnu/qt5/QtCore/qvariant.h:37,
                 from /usr/include/x86_64-linux-gnu/qt5/QtCore/QVariant:1,
                 from .uic/ui_device.h:12,
                 from ../CAT_BT/device.h:56,
                 from ../CAT_BT/device.cpp:51:
/usr/include/x86_64-linux-gnu/qt5/QtCore/qglobal.h:1073:45: note: declaration of 'struct QtPrivate::QEnableIf<false, QMetaObject::Connection>'
 template <bool B, typename T = void> struct QEnableIf;
                                             ^
In file included from /usr/include/x86_64-linux-gnu/qt5/QtCore/qvariant.h:45:0,
                 from /usr/include/x86_64-linux-gnu/qt5/QtCore/QVariant:1,
                 from .uic/ui_device.h:12,
                 from ../CAT_BT/device.h:56,
                 from ../CAT_BT/device.cpp:51:
/usr/include/x86_64-linux-gnu/qt5/QtCore/qobject.h:285:13: note: candidate: template<class Func1, class Func2> static typename QtPrivate::QEnableIf<(QtPrivate::FunctionPointer<Func2>::ArgumentCount == (-1)), QMetaObject::Connection>::Type QObject::connect(const typename QtPrivate::FunctionPointer<Func>::Object*, Func1, Func2)
             connect(const typename QtPrivate::FunctionPointer<Func1>::Object *sender, Func1 signal, Func2 slot)
             ^
/usr/include/x86_64-linux-gnu/qt5/QtCore/qobject.h:285:13: note:   template argument deduction/substitution failed:
../CAT_BT/device.cpp:121:49: note:   candidate expects 3 arguments, 4 provided
             &MainWindow_BT::displayStatusMessage);
                                                 ^
In file included from /usr/include/x86_64-linux-gnu/qt5/QtCore/qvariant.h:45:0,
                 from /usr/include/x86_64-linux-gnu/qt5/QtCore/QVariant:1,
                 from .uic/ui_device.h:12,
                 from ../CAT_BT/device.h:56,
                 from ../CAT_BT/device.cpp:51:
/usr/include/x86_64-linux-gnu/qt5/QtCore/qobject.h:293:13: note: candidate: template<class Func1, class Func2> static typename QtPrivate::QEnableIf<(QtPrivate::FunctionPointer<Func2>::ArgumentCount == (-1)), QMetaObject::Connection>::Type QObject::connect(const typename QtPrivate::FunctionPointer<Func>::Object*, Func1, const QObject*, Func2, Qt::ConnectionType)
             connect(const typename QtPrivate::FunctionPointer<Func1>::Object *sender, Func1 signal, const QObject *context, Func2 slot,
             ^
/usr/include/x86_64-linux-gnu/qt5/QtCore/qobject.h:293:13: note:   template argument deduction/substitution failed:
/usr/include/x86_64-linux-gnu/qt5/QtCore/qobject.h: In substitution of 'template<class Func1, class Func2> static typename QtPrivate::QEnableIf<(QtPrivate::FunctionPointer<Func2>::ArgumentCount == (-1)), QMetaObject::Connection>::Type QObject::connect(const typename QtPrivate::FunctionPointer<Func>::Object*, Func1, const QObject*, Func2, Qt::ConnectionType) [with Func1 = void (DeviceDiscoveryDialog::*)(const QString&); Func2 = void (MainWindow_BT::*)(const QString&)]':
../CAT_BT/device.cpp:121:49:   required from here
/usr/include/x86_64-linux-gnu/qt5/QtCore/qobject.h:293:13: error: invalid use of incomplete type 'struct QtPrivate::QEnableIf<false, QMetaObject::Connection>'
In file included from /usr/include/x86_64-linux-gnu/qt5/QtCore/qatomic.h:34:0,
                 from /usr/include/x86_64-linux-gnu/qt5/QtCore/qvariant.h:37,
                 from /usr/include/x86_64-linux-gnu/qt5/QtCore/QVariant:1,
                 from .uic/ui_device.h:12,
                 from ../CAT_BT/device.h:56,
                 from ../CAT_BT/device.cpp:51:
/usr/include/x86_64-linux-gnu/qt5/QtCore/qglobal.h:1073:45: note: declaration of 'struct QtPrivate::QEnableIf<false, QMetaObject::Connection>'
 template <bool B, typename T = void> struct QEnableIf;
                                             ^
../CAT_BT/device.cpp: In member function 'void DeviceDiscoveryDialog::displayPairingMenu(const QPoint&)':
../CAT_BT/device.cpp:409:14: warning: unused variable 'testAction' [-Wunused-variable]
     QAction *testAction = menu.addAction("BT test menu add... ");
              ^
../CAT_BT/device.cpp: At global scope:
../CAT_BT/device.cpp:461:47: warning: unused parameter 'message' [-Wunused-parameter]
 int DeviceDiscoveryDialog::StatusBar(QString *message)
                                               ^
Makefile:606: recipe for target '.obj/device.o' failed
make: *** [.obj/device.o] Error 1
19:21:42: The process "/usr/bin/make" exited with code 2.
Error while building/deploying project CAT_BT (kit: Desktop)
When executing step "Make"

[Chris Kawa]

In the connect statement third param is a pointer to object and fourth is a member of that object class.

You're in DeviceDiscoveryDialog constructor so this is of class DeviceDiscoveryDialog. In your connect you have a member of MainWindow_BT. This can't work. You can't call a method of class A on an instance of class B.
If you use this as third parameter the fourth needs to be a member of its class, so &DeviceDiscovery::SomethingSomething.
If you want the fourth parameter to be &MainWindow_BT::displayStatusMessage the third parameter needs to be a pointer to an instance of that class.

As @SGaist already mentioned - you probably don't have a pointer to MainWindow_BT in your DeviceDiscoveryDialog class. You're doing the connect in the wrong place. If you're creating an instance of DeviceDiscoveryDialog in MainWindow_BT then you should do that connect in MainWindow_BT, where you have both pointers available, not in the dialog that does not have access to the instance that created it.

[JonB]

@AnneRanch
You need to act on the final paragraph of @Chris-Kawa's answer and @SGaist's comment, for the error to go away.

[Anonymous_Banned275]

@Chris-Kawa said in Combining classes - append class to QMainWindow:

In the connect statement third param is a pointer to object and fourth is a member of that object class.

You're in DeviceDiscoveryDialog constructor so this is of class DeviceDiscoveryDialog. In your connect you have a member of MainWindow_BT. This can't work. You can't call a method of class A on an instance of class B.
If you use this as third parameter the fourth needs to be a member of its class, so &DeviceDiscovery::SomethingSomething.
If you want the fourth parameter to be &MainWindow_BT::displayStatusMessage the third parameter needs to be a pointer to an instance of that class.

As @SGaist already mentioned - you probably don't have a pointer to MainWindow_BT in your DeviceDiscoveryDialog class. You're doing the connect in the wrong place. If you're creating an instance of DeviceDiscoveryDialog in MainWindow_BT then you should do that connect in MainWindow_BT, where you have both pointers available, not in the dialog that does not have access to the instance that created it.

Thanks Cris,
as always you are right on the money with your explanation.

Now for absolutely last question in this discussion -
why does intelisense offers inaccessible pointer as a valid entry ?

Moral of the story - use intellisense with caution and NOT as a replacement for my albeit limited " experience / intelligence" .

[Anonymous_Banned275]

This post is deleted!

[JonB]

This post is deleted!

[Anonymous_Banned275]

@JonB said in Combining classes - append class to QMainWindow:

@AnneRanch
You are beyond rude (and not for the first time). I was trying to draw your attention to the fact that you will not solve your error message until you move where you are trying to do the connect(), rather than playing with its parameters where it currently is. I was short, polite & helpful.

It's nice to know when @Chris-Kawa tells you this in hist last paragraph, you find it helpful. When I merely tried to draw your attention to the last of his paragraphs --- which is what you need to act on before you worry about understanding the preceding stuff --- his is helpful, mine is "superficial" and "does not help solve" and "inappropriate" and seems to demand an apology from you.

Why is my comment "inappropriate"? Where have I ever asked you to apologise or say sorry for anything?

Just unbelievable. GtH.

Beyond rude post deleted .

[Chris Kawa]

Keep your cool everyone. The world is messed up as it is. Lets try to stay positive and friendly at least here ;)

Anywho...

why does intelisense offers inaccessible pointer as a valid entry ?

It's a best guess effort. C++ is complicated language to provide accurate suggestions without actually compiling the whole thing. In some cases it doesn't have enough context so it uses heuristics to merely suggest what a valid syntax for given expression is without much consideration for the actual correctness of the program as a whole. Code completion is usually a lot more accurate in managed languages like C# or Java, as you have full language reflection at your disposal. In C++ a simple thing like #define true false can wreak havoc on suggestions.

I'd suggest to treat code completion as a basic name and syntax helper. Sometimes you don't remember exact function or parameter name. Sometimes the param list is just long and it helps you save a few key strokes to type it in. Sometimes you want to quickly browse through class members looking for familiar keyword. For those cases it works well enough. I wouldn't rely on it to suggest meaningful code logic though. That should be on the programmer anyway IMO. In case of connect's it's especially important to understand what relations you're creating so relying on machine suggestions is not a good idea, at least until we have that world class AI made :P