Set-up MariaDB library file location programmatically?
-
I've been trying to follow: https://doc.qt.io/qt-5/sql-driver.html
Lots of issues, for starters a terminal at:/Users/simonplatten/Qt/5.14.2/Src/qtbase/src/plugins/sqldrivers/mysql
Executing qmake: ~/Qt/5.14.2/clang_64/bin/qmake -version
Does not return the same I only get:
QMake version 3.1 Using Qt version 5.14.2 in /Users/simonplatten/Qt/5.14.2/clang_64/libI could do with some help on how to turn the source into a driver.
I got a little further:
export QTDIR=/Users/simonplatten/Qt/5.14.2 export QTDIRBIN=$QTDIR/clang_64/bin cd $QTDIR/Src/qtbase/src/plugins/sqldrivers $QTDIRBIN/qmake -- MYSQL_PREFIX=/usr/local Running configuration tests... Checking for DB2 (IBM)... no Checking for InterBase... no Checking for MySQL... no Checking for OCI (Oracle)... no Checking for ODBC... no Checking for PostgreSQL... no Checking for SQLite (version 2)... no Checking for TDS (Sybase)... no Done running configuration tests. Configure summary: Qt Sql Drivers: DB2 (IBM) .............................. no InterBase .............................. no MySql .................................. no OCI (Oracle) ........................... no ODBC ................................... no PostgreSQL ............................. no SQLite2 ................................ no SQLite ................................. yes Using system provided SQLite ......... no TDS (Sybase) ........................... no Qt is now configured for building. Just run 'make'. Once everything is built, you must run 'make install'. Qt will be installed into '/Users/simonplatten/Qt/5.14.2/clang_64'. Prior to reconfiguration, make sure you remove any leftovers from the previous build.I then ran "make", waited for it to complete. Some errors at the end:
Project ERROR: Library 'freetype' is not defined. make[1]: *** [sub-minimal-make_first] Error 3 make: *** [sub-platforms-make_first] Error 2Then run "make install".
It would appear this has not built the driver as I still see in the Application Output:
Warning:QSqlDatabase: QMYSQL driver not loaded Warning:QSqlDatabase: available drivers: QSQLITE QODBC QODBC3 QPSQL QPSQL7 Info: L00000001:onFailure: db, failure: Driver not loaded Driver not loadedWhy does it appear that its all set-up to build sqlite and NOT mysql ?
-
@SPlatten There is no point to run "make install" if make failed...
Install libfreetype-dev package and try again.Also, if you see "Checking for MySQL... no" in configure output, then why even bother calling make?!
To see why MySQL is disabled check the configure.log file. -
I'v been through the steps again:
cd $QTDIR/Src/qtbase/src/plugins/sqldrivers $QTDIRBIN/qmake -- MYSQL_PREFIX=/usr/localThe output is the same:
Running configuration tests... Done running configuration tests. Configure summary: Qt Sql Drivers: DB2 (IBM) .............................. no InterBase .............................. no MySql .................................. no OCI (Oracle) ........................... no ODBC ................................... no PostgreSQL ............................. no SQLite2 ................................ no SQLite ................................. yes Using system provided SQLite ......... no TDS (Sybase) ........................... no Qt is now configured for building. Just run 'make'. Once everything is built, you must run 'make install'. Qt will be installed into '/Users/simonplatten/Qt/5.14.2/clang_64'. Prior to reconfiguration, make sure you remove any leftovers from the previous build.Again it looks like its set-up to build SQLite and not MySQL. I then run make and the result is:
cd sqlite/ && ( test -e Makefile || /Users/simonplatten/Qt/5.14.2/clang_64/bin/qmake -o Makefile /Users/simonplatten/Qt/5.14.2/Src/qtbase/src/plugins/sqldrivers/sqlite/sqlite.pro ) && /Applications/Xcode.app/Contents/Developer/usr/bin/make -f Makefile make[1]: Nothing to be done for `first'.@jsulm , I tried your instruction:
install: libfreetype-dev: No such file or directory'config.log' is quite verbose:
Command line: MYSQL_PREFIX=/usr/local Global lib dirs: [] [/Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX10.15.sdk/usr/lib] Global inc dirs: [/usr/local/opt/openssl/include] [/Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/include/c++/v1 /Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/lib/clang/11.0.3/include /Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX10.15.sdk/usr/include /Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/include] loaded result for library config.sqldrivers.libraries.db2 Trying source 0 (type inline) of library db2 ... => source failed condition 'config.win32'. Trying source 1 (type inline) of library db2 ... sqlcli.h not found in [] and global paths. sqlcli1.h not found in [] and global paths. => source produced no result. test config.sqldrivers.libraries.db2 FAILED loaded result for library config.sqldrivers.libraries.ibase Trying source 0 (type inline) of library ibase ... => source failed condition 'config.win32'. Trying source 1 (type inline) of library ibase ... ibase.h not found in [] and global paths. => source produced no result. test config.sqldrivers.libraries.ibase FAILED loaded result for library config.sqldrivers.libraries.mysql Trying source 0 (type mysqlConfig) of library mysql ... + /usr/local/bin/mysql_config --version > 10.4.6 + /usr/local/bin/mysql_config --libs_r > -L/usr/local/Cellar/mariadb/10.4.6_1/lib -lmariadb -lz -liconv -lssl -lcrypto + /usr/local/bin/mysql_config --include > -I/usr/local/Cellar/mariadb/10.4.6_1/include/mysql -I/usr/local/Cellar/mariadb/10.4.6_1/include/mysql/.. + cd /Users/simonplatten/Qt/5.14.2/Src/qtbase/src/plugins/sqldrivers/config.tests/mysql && /Users/simonplatten/Qt/5.14.2/clang_64/bin/qmake "CONFIG -= qt debug_and_release app_bundle lib_bundle" "CONFIG += shared warn_off console single_arch" 'INCLUDEPATH += /usr/local/opt/openssl/include' 'QMAKE_USE += mysql' 'QMAKE_LIBS_MYSQL = -L/usr/local/Cellar/mariadb/10.4.6_1/lib' 'QMAKE_INCDIR_MYSQL = /usr/local/Cellar/mariadb/10.4.6_1/include/mysql /usr/local/Cellar/mariadb/10.4.6_1/include' /Users/simonplatten/Qt/5.14.2/Src/qtbase/src/plugins/sqldrivers/config.tests/mysql > Info: creating stash file /Users/simonplatten/Qt/5.14.2/Src/qtbase/src/plugins/sqldrivers/config.tests/.qmake.stash + cd /Users/simonplatten/Qt/5.14.2/Src/qtbase/src/plugins/sqldrivers/config.tests/mysql && MAKEFLAGS= make > /Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/clang++ -c -pipe -stdlib=libc++ -O2 -std=gnu++11 -arch x86_64 -isysroot /Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX10.15.sdk -mmacosx-version-min=10.13 -w -fPIC -I. -I/usr/local/opt/openssl/include -I/usr/local/Cellar/mariadb/10.4.6_1/include/mysql -I/usr/local/Cellar/mariadb/10.4.6_1/include -I/Users/simonplatten/Qt/5.14.2/clang_64/mkspecs/macx-clang -o main.o main.cpp > /Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/clang++ -stdlib=libc++ -headerpad_max_install_names -arch x86_64 -Wl,-syslibroot,/Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX10.15.sdk -mmacosx-version-min=10.13 -Wl,-rpath,@executable_path/../Frameworks -o mysql main.o -L/usr/local/Cellar/mariadb/10.4.6_1/lib > Undefined symbols for architecture x86_64: > "_mysql_get_client_version", referenced from: > _main in main.o > ld: symbol(s) not found for architecture x86_64 > clang: error: linker command failed with exit code 1 (use -v to see invocation) > make: *** [mysql] Error 1 => source failed verification. Trying source 1 (type mysqlConfig) of library mysql ... + /usr/local/bin/mysql_config --version > 10.4.6 + /usr/local/bin/mysql_config --libs > -L/usr/local/Cellar/mariadb/10.4.6_1/lib -lmariadb -lz -liconv -lssl -lcrypto + /usr/local/bin/mysql_config --include > -I/usr/local/Cellar/mariadb/10.4.6_1/include/mysql -I/usr/local/Cellar/mariadb/10.4.6_1/include/mysql/.. + cd /Users/simonplatten/Qt/5.14.2/Src/qtbase/src/plugins/sqldrivers/config.tests/mysql && /Users/simonplatten/Qt/5.14.2/clang_64/bin/qmake "CONFIG -= qt debug_and_release app_bundle lib_bundle" "CONFIG += shared warn_off console single_arch" 'INCLUDEPATH += /usr/local/opt/openssl/include' 'QMAKE_USE += mysql' 'QMAKE_LIBS_MYSQL = -L/usr/local/Cellar/mariadb/10.4.6_1/lib' 'QMAKE_INCDIR_MYSQL = /usr/local/Cellar/mariadb/10.4.6_1/include/mysql /usr/local/Cellar/mariadb/10.4.6_1/include' /Users/simonplatten/Qt/5.14.2/Src/qtbase/src/plugins/sqldrivers/config.tests/mysql + cd /Users/simonplatten/Qt/5.14.2/Src/qtbase/src/plugins/sqldrivers/config.tests/mysql && MAKEFLAGS= make clean && MAKEFLAGS= make > rm -f main.o > rm -f *~ core *.core > /Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/clang++ -c -pipe -stdlib=libc++ -O2 -std=gnu++11 -arch x86_64 -isysroot /Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX10.15.sdk -mmacosx-version-min=10.13 -w -fPIC -I. -I/usr/local/opt/openssl/include -I/usr/local/Cellar/mariadb/10.4.6_1/include/mysql -I/usr/local/Cellar/mariadb/10.4.6_1/include -I/Users/simonplatten/Qt/5.14.2/clang_64/mkspecs/macx-clang -o main.o main.cpp > /Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/clang++ -stdlib=libc++ -headerpad_max_install_names -arch x86_64 -Wl,-syslibroot,/Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX10.15.sdk -mmacosx-version-min=10.13 -Wl,-rpath,@executable_path/../Frameworks -o mysql main.o -L/usr/local/Cellar/mariadb/10.4.6_1/lib > Undefined symbols for architecture x86_64: > "_mysql_get_client_version", referenced from: > _main in main.o > ld: symbol(s) not found for architecture x86_64 > clang: error: linker command failed with exit code 1 (use -v to see invocation) > make: *** [mysql] Error 1 => source failed verification. Trying source 2 (type mysqlConfig) of library mysql ... + /usr/local/bin/mysql_config --version > 10.4.6 + /usr/local/bin/mysql_config --libs_r > -L/usr/local/Cellar/mariadb/10.4.6_1/lib -lmariadb -lz -liconv -lssl -lcrypto + /usr/local/bin/mysql_config --include > -I/usr/local/Cellar/mariadb/10.4.6_1/include/mysql -I/usr/local/Cellar/mariadb/10.4.6_1/include/mysql/.. + cd /Users/simonplatten/Qt/5.14.2/Src/qtbase/src/plugins/sqldrivers/config.tests/mysql && /Users/simonplatten/Qt/5.14.2/clang_64/bin/qmake "CONFIG -= qt debug_and_release app_bundle lib_bundle" "CONFIG += shared warn_off console single_arch" 'INCLUDEPATH += /usr/local/opt/openssl/include' 'QMAKE_USE += mysql' 'QMAKE_LIBS_MYSQL = -L/usr/local/Cellar/mariadb/10.4.6_1/lib -lmariadb -lz -liconv -lssl -lcrypto' 'QMAKE_INCDIR_MYSQL = /usr/local/Cellar/mariadb/10.4.6_1/include/mysql /usr/local/Cellar/mariadb/10.4.6_1/include' /Users/simonplatten/Qt/5.14.2/Src/qtbase/src/plugins/sqldrivers/config.tests/mysql + cd /Users/simonplatten/Qt/5.14.2/Src/qtbase/src/plugins/sqldrivers/config.tests/mysql && MAKEFLAGS= make clean && MAKEFLAGS= make > rm -f main.o > rm -f *~ core *.core > /Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/clang++ -c -pipe -stdlib=libc++ -O2 -std=gnu++11 -arch x86_64 -isysroot /Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX10.15.sdk -mmacosx-version-min=10.13 -w -fPIC -I. -I/usr/local/opt/openssl/include -I/usr/local/Cellar/mariadb/10.4.6_1/include/mysql -I/usr/local/Cellar/mariadb/10.4.6_1/include -I/Users/simonplatten/Qt/5.14.2/clang_64/mkspecs/macx-clang -o main.o main.cpp > /Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/clang++ -stdlib=libc++ -headerpad_max_install_names -arch x86_64 -Wl,-syslibroot,/Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX10.15.sdk -mmacosx-version-min=10.13 -Wl,-rpath,@executable_path/../Frameworks -o mysql main.o -L/usr/local/Cellar/mariadb/10.4.6_1/lib -lmariadb -lz -liconv -lssl -lcrypto > ld: library not found for -lssl > clang: error: linker command failed with exit code 1 (use -v to see invocation) > make: *** [mysql] Error 1 => source failed verification. Trying source 3 (type mysqlConfig) of library mysql ... + /usr/local/bin/mysql_config --version > 10.4.6 + /usr/local/bin/mysql_config --libs > -L/usr/local/Cellar/mariadb/10.4.6_1/lib -lmariadb -lz -liconv -lssl -lcrypto + /usr/local/bin/mysql_config --include > -I/usr/local/Cellar/mariadb/10.4.6_1/include/mysql -I/usr/local/Cellar/mariadb/10.4.6_1/include/mysql/.. + cd /Users/simonplatten/Qt/5.14.2/Src/qtbase/src/plugins/sqldrivers/config.tests/mysql && /Users/simonplatten/Qt/5.14.2/clang_64/bin/qmake "CONFIG -= qt debug_and_release app_bundle lib_bundle" "CONFIG += shared warn_off console single_arch" 'INCLUDEPATH += /usr/local/opt/openssl/include' 'QMAKE_USE += mysql' 'QMAKE_LIBS_MYSQL = -L/usr/local/Cellar/mariadb/10.4.6_1/lib -lmariadb -lz -liconv -lssl -lcrypto' 'QMAKE_INCDIR_MYSQL = /usr/local/Cellar/mariadb/10.4.6_1/include/mysql /usr/local/Cellar/mariadb/10.4.6_1/include' /Users/simonplatten/Qt/5.14.2/Src/qtbase/src/plugins/sqldrivers/config.tests/mysql + cd /Users/simonplatten/Qt/5.14.2/Src/qtbase/src/plugins/sqldrivers/config.tests/mysql && MAKEFLAGS= make clean && MAKEFLAGS= make > rm -f main.o > rm -f *~ core *.core > /Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/clang++ -c -pipe -stdlib=libc++ -O2 -std=gnu++11 -arch x86_64 -isysroot /Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX10.15.sdk -mmacosx-version-min=10.13 -w -fPIC -I. -I/usr/local/opt/openssl/include -I/usr/local/Cellar/mariadb/10.4.6_1/include/mysql -I/usr/local/Cellar/mariadb/10.4.6_1/include -I/Users/simonplatten/Qt/5.14.2/clang_64/mkspecs/macx-clang -o main.o main.cpp > /Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/clang++ -stdlib=libc++ -headerpad_max_install_names -arch x86_64 -Wl,-syslibroot,/Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX10.15.sdk -mmacosx-version-min=10.13 -Wl,-rpath,@executable_path/../Frameworks -o mysql main.o -L/usr/local/Cellar/mariadb/10.4.6_1/lib -lmariadb -lz -liconv -lssl -lcrypto > ld: library not found for -lssl > clang: error: linker command failed with exit code 1 (use -v to see invocation) > make: *** [mysql] Error 1 => source failed verification. Trying source 4 (type inline) of library mysql ... mysql.h not found in [/usr/local/include] and global paths. => source produced no result. Trying source 5 (type inline) of library mysql ... => source failed condition 'config.win32'. Trying source 6 (type inline) of library mysql ... mysql.h not found in [/usr/local/include] and global paths. => source produced no result. test config.sqldrivers.libraries.mysql FAILED loaded result for library config.sqldrivers.libraries.oci Trying source 0 (type inline) of library oci ... => source failed condition 'config.win32'. Trying source 1 (type inline) of library oci ... oci.h not found in [] and global paths. => source produced no result. test config.sqldrivers.libraries.oci FAILED loaded result for library config.sqldrivers.libraries.odbc Trying source 0 (type inline) of library odbc ... => source failed condition 'config.win32'. Trying source 1 (type inline) of library odbc ... sql.h not found in [] and global paths. sqlext.h not found in [] and global paths. => source produced no result. Trying source 2 (type inline) of library odbc ... => source failed condition '!config.win32 && !config.darwin'. test config.sqldrivers.libraries.odbc FAILED loaded result for library config.sqldrivers.libraries.psql Trying source 0 (type pkgConfig) of library psql ... pkg-config use disabled globally. => source produced no result. Trying source 1 (type psqlConfig) of library psql ... pg_config not found. => source produced no result. Trying source 2 (type psqlEnv) of library psql ... => source failed condition 'config.win32'. Trying source 3 (type psqlEnv) of library psql ... libpq-fe.h not found in [] and global paths. => source produced no result. test config.sqldrivers.libraries.psql FAILED loaded result for library config.sqldrivers.libraries.sqlite2 Trying source 0 (type inline) of library sqlite2 ... sqlite.h not found in [] and global paths. => source produced no result. test config.sqldrivers.libraries.sqlite2 FAILED loaded result for library config.sqldrivers.libraries.tds Trying source 0 (type sybaseEnv) of library tds ... => source failed condition 'config.win32'. Trying source 1 (type sybaseEnv) of library tds ... + cd /Users/simonplatten/Qt/5.14.2/Src/qtbase/src/plugins/sqldrivers/config.tests/tds && /Users/simonplatten/Qt/5.14.2/clang_64/bin/qmake "CONFIG -= qt debug_and_release app_bundle lib_bundle" "CONFIG += shared warn_off console single_arch" 'INCLUDEPATH += /usr/local/opt/openssl/include' 'QMAKE_USE += tds' 'QMAKE_LIBS_TDS = -lsybdb' /Users/simonplatten/Qt/5.14.2/Src/qtbase/src/plugins/sqldrivers/config.tests/tds + cd /Users/simonplatten/Qt/5.14.2/Src/qtbase/src/plugins/sqldrivers/config.tests/tds && MAKEFLAGS= make > /Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/clang++ -c -pipe -stdlib=libc++ -O2 -std=gnu++11 -arch x86_64 -isysroot /Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX10.15.sdk -mmacosx-version-min=10.13 -w -fPIC -I. -I/usr/local/opt/openssl/include -I/Users/simonplatten/Qt/5.14.2/clang_64/mkspecs/macx-clang -o main.o main.cpp > main.cpp:2:10: fatal error: 'sybfront.h' file not found > #include <sybfront.h> > ^~~~~~~~~~~~ > 1 error generated. > make: *** [main.o] Error 1 => source failed verification. test config.sqldrivers.libraries.tds FAILEDKind Regards,
Sy -
I'v been through the steps again:
cd $QTDIR/Src/qtbase/src/plugins/sqldrivers $QTDIRBIN/qmake -- MYSQL_PREFIX=/usr/localThe output is the same:
Running configuration tests... Done running configuration tests. Configure summary: Qt Sql Drivers: DB2 (IBM) .............................. no InterBase .............................. no MySql .................................. no OCI (Oracle) ........................... no ODBC ................................... no PostgreSQL ............................. no SQLite2 ................................ no SQLite ................................. yes Using system provided SQLite ......... no TDS (Sybase) ........................... no Qt is now configured for building. Just run 'make'. Once everything is built, you must run 'make install'. Qt will be installed into '/Users/simonplatten/Qt/5.14.2/clang_64'. Prior to reconfiguration, make sure you remove any leftovers from the previous build.Again it looks like its set-up to build SQLite and not MySQL. I then run make and the result is:
cd sqlite/ && ( test -e Makefile || /Users/simonplatten/Qt/5.14.2/clang_64/bin/qmake -o Makefile /Users/simonplatten/Qt/5.14.2/Src/qtbase/src/plugins/sqldrivers/sqlite/sqlite.pro ) && /Applications/Xcode.app/Contents/Developer/usr/bin/make -f Makefile make[1]: Nothing to be done for `first'.@jsulm , I tried your instruction:
install: libfreetype-dev: No such file or directory'config.log' is quite verbose:
Command line: MYSQL_PREFIX=/usr/local Global lib dirs: [] [/Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX10.15.sdk/usr/lib] Global inc dirs: [/usr/local/opt/openssl/include] [/Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/include/c++/v1 /Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/lib/clang/11.0.3/include /Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX10.15.sdk/usr/include /Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/include] loaded result for library config.sqldrivers.libraries.db2 Trying source 0 (type inline) of library db2 ... => source failed condition 'config.win32'. Trying source 1 (type inline) of library db2 ... sqlcli.h not found in [] and global paths. sqlcli1.h not found in [] and global paths. => source produced no result. test config.sqldrivers.libraries.db2 FAILED loaded result for library config.sqldrivers.libraries.ibase Trying source 0 (type inline) of library ibase ... => source failed condition 'config.win32'. Trying source 1 (type inline) of library ibase ... ibase.h not found in [] and global paths. => source produced no result. test config.sqldrivers.libraries.ibase FAILED loaded result for library config.sqldrivers.libraries.mysql Trying source 0 (type mysqlConfig) of library mysql ... + /usr/local/bin/mysql_config --version > 10.4.6 + /usr/local/bin/mysql_config --libs_r > -L/usr/local/Cellar/mariadb/10.4.6_1/lib -lmariadb -lz -liconv -lssl -lcrypto + /usr/local/bin/mysql_config --include > -I/usr/local/Cellar/mariadb/10.4.6_1/include/mysql -I/usr/local/Cellar/mariadb/10.4.6_1/include/mysql/.. + cd /Users/simonplatten/Qt/5.14.2/Src/qtbase/src/plugins/sqldrivers/config.tests/mysql && /Users/simonplatten/Qt/5.14.2/clang_64/bin/qmake "CONFIG -= qt debug_and_release app_bundle lib_bundle" "CONFIG += shared warn_off console single_arch" 'INCLUDEPATH += /usr/local/opt/openssl/include' 'QMAKE_USE += mysql' 'QMAKE_LIBS_MYSQL = -L/usr/local/Cellar/mariadb/10.4.6_1/lib' 'QMAKE_INCDIR_MYSQL = /usr/local/Cellar/mariadb/10.4.6_1/include/mysql /usr/local/Cellar/mariadb/10.4.6_1/include' /Users/simonplatten/Qt/5.14.2/Src/qtbase/src/plugins/sqldrivers/config.tests/mysql > Info: creating stash file /Users/simonplatten/Qt/5.14.2/Src/qtbase/src/plugins/sqldrivers/config.tests/.qmake.stash + cd /Users/simonplatten/Qt/5.14.2/Src/qtbase/src/plugins/sqldrivers/config.tests/mysql && MAKEFLAGS= make > /Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/clang++ -c -pipe -stdlib=libc++ -O2 -std=gnu++11 -arch x86_64 -isysroot /Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX10.15.sdk -mmacosx-version-min=10.13 -w -fPIC -I. -I/usr/local/opt/openssl/include -I/usr/local/Cellar/mariadb/10.4.6_1/include/mysql -I/usr/local/Cellar/mariadb/10.4.6_1/include -I/Users/simonplatten/Qt/5.14.2/clang_64/mkspecs/macx-clang -o main.o main.cpp > /Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/clang++ -stdlib=libc++ -headerpad_max_install_names -arch x86_64 -Wl,-syslibroot,/Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX10.15.sdk -mmacosx-version-min=10.13 -Wl,-rpath,@executable_path/../Frameworks -o mysql main.o -L/usr/local/Cellar/mariadb/10.4.6_1/lib > Undefined symbols for architecture x86_64: > "_mysql_get_client_version", referenced from: > _main in main.o > ld: symbol(s) not found for architecture x86_64 > clang: error: linker command failed with exit code 1 (use -v to see invocation) > make: *** [mysql] Error 1 => source failed verification. Trying source 1 (type mysqlConfig) of library mysql ... + /usr/local/bin/mysql_config --version > 10.4.6 + /usr/local/bin/mysql_config --libs > -L/usr/local/Cellar/mariadb/10.4.6_1/lib -lmariadb -lz -liconv -lssl -lcrypto + /usr/local/bin/mysql_config --include > -I/usr/local/Cellar/mariadb/10.4.6_1/include/mysql -I/usr/local/Cellar/mariadb/10.4.6_1/include/mysql/.. + cd /Users/simonplatten/Qt/5.14.2/Src/qtbase/src/plugins/sqldrivers/config.tests/mysql && /Users/simonplatten/Qt/5.14.2/clang_64/bin/qmake "CONFIG -= qt debug_and_release app_bundle lib_bundle" "CONFIG += shared warn_off console single_arch" 'INCLUDEPATH += /usr/local/opt/openssl/include' 'QMAKE_USE += mysql' 'QMAKE_LIBS_MYSQL = -L/usr/local/Cellar/mariadb/10.4.6_1/lib' 'QMAKE_INCDIR_MYSQL = /usr/local/Cellar/mariadb/10.4.6_1/include/mysql /usr/local/Cellar/mariadb/10.4.6_1/include' /Users/simonplatten/Qt/5.14.2/Src/qtbase/src/plugins/sqldrivers/config.tests/mysql + cd /Users/simonplatten/Qt/5.14.2/Src/qtbase/src/plugins/sqldrivers/config.tests/mysql && MAKEFLAGS= make clean && MAKEFLAGS= make > rm -f main.o > rm -f *~ core *.core > /Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/clang++ -c -pipe -stdlib=libc++ -O2 -std=gnu++11 -arch x86_64 -isysroot /Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX10.15.sdk -mmacosx-version-min=10.13 -w -fPIC -I. -I/usr/local/opt/openssl/include -I/usr/local/Cellar/mariadb/10.4.6_1/include/mysql -I/usr/local/Cellar/mariadb/10.4.6_1/include -I/Users/simonplatten/Qt/5.14.2/clang_64/mkspecs/macx-clang -o main.o main.cpp > /Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/clang++ -stdlib=libc++ -headerpad_max_install_names -arch x86_64 -Wl,-syslibroot,/Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX10.15.sdk -mmacosx-version-min=10.13 -Wl,-rpath,@executable_path/../Frameworks -o mysql main.o -L/usr/local/Cellar/mariadb/10.4.6_1/lib > Undefined symbols for architecture x86_64: > "_mysql_get_client_version", referenced from: > _main in main.o > ld: symbol(s) not found for architecture x86_64 > clang: error: linker command failed with exit code 1 (use -v to see invocation) > make: *** [mysql] Error 1 => source failed verification. Trying source 2 (type mysqlConfig) of library mysql ... + /usr/local/bin/mysql_config --version > 10.4.6 + /usr/local/bin/mysql_config --libs_r > -L/usr/local/Cellar/mariadb/10.4.6_1/lib -lmariadb -lz -liconv -lssl -lcrypto + /usr/local/bin/mysql_config --include > -I/usr/local/Cellar/mariadb/10.4.6_1/include/mysql -I/usr/local/Cellar/mariadb/10.4.6_1/include/mysql/.. + cd /Users/simonplatten/Qt/5.14.2/Src/qtbase/src/plugins/sqldrivers/config.tests/mysql && /Users/simonplatten/Qt/5.14.2/clang_64/bin/qmake "CONFIG -= qt debug_and_release app_bundle lib_bundle" "CONFIG += shared warn_off console single_arch" 'INCLUDEPATH += /usr/local/opt/openssl/include' 'QMAKE_USE += mysql' 'QMAKE_LIBS_MYSQL = -L/usr/local/Cellar/mariadb/10.4.6_1/lib -lmariadb -lz -liconv -lssl -lcrypto' 'QMAKE_INCDIR_MYSQL = /usr/local/Cellar/mariadb/10.4.6_1/include/mysql /usr/local/Cellar/mariadb/10.4.6_1/include' /Users/simonplatten/Qt/5.14.2/Src/qtbase/src/plugins/sqldrivers/config.tests/mysql + cd /Users/simonplatten/Qt/5.14.2/Src/qtbase/src/plugins/sqldrivers/config.tests/mysql && MAKEFLAGS= make clean && MAKEFLAGS= make > rm -f main.o > rm -f *~ core *.core > /Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/clang++ -c -pipe -stdlib=libc++ -O2 -std=gnu++11 -arch x86_64 -isysroot /Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX10.15.sdk -mmacosx-version-min=10.13 -w -fPIC -I. -I/usr/local/opt/openssl/include -I/usr/local/Cellar/mariadb/10.4.6_1/include/mysql -I/usr/local/Cellar/mariadb/10.4.6_1/include -I/Users/simonplatten/Qt/5.14.2/clang_64/mkspecs/macx-clang -o main.o main.cpp > /Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/clang++ -stdlib=libc++ -headerpad_max_install_names -arch x86_64 -Wl,-syslibroot,/Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX10.15.sdk -mmacosx-version-min=10.13 -Wl,-rpath,@executable_path/../Frameworks -o mysql main.o -L/usr/local/Cellar/mariadb/10.4.6_1/lib -lmariadb -lz -liconv -lssl -lcrypto > ld: library not found for -lssl > clang: error: linker command failed with exit code 1 (use -v to see invocation) > make: *** [mysql] Error 1 => source failed verification. Trying source 3 (type mysqlConfig) of library mysql ... + /usr/local/bin/mysql_config --version > 10.4.6 + /usr/local/bin/mysql_config --libs > -L/usr/local/Cellar/mariadb/10.4.6_1/lib -lmariadb -lz -liconv -lssl -lcrypto + /usr/local/bin/mysql_config --include > -I/usr/local/Cellar/mariadb/10.4.6_1/include/mysql -I/usr/local/Cellar/mariadb/10.4.6_1/include/mysql/.. + cd /Users/simonplatten/Qt/5.14.2/Src/qtbase/src/plugins/sqldrivers/config.tests/mysql && /Users/simonplatten/Qt/5.14.2/clang_64/bin/qmake "CONFIG -= qt debug_and_release app_bundle lib_bundle" "CONFIG += shared warn_off console single_arch" 'INCLUDEPATH += /usr/local/opt/openssl/include' 'QMAKE_USE += mysql' 'QMAKE_LIBS_MYSQL = -L/usr/local/Cellar/mariadb/10.4.6_1/lib -lmariadb -lz -liconv -lssl -lcrypto' 'QMAKE_INCDIR_MYSQL = /usr/local/Cellar/mariadb/10.4.6_1/include/mysql /usr/local/Cellar/mariadb/10.4.6_1/include' /Users/simonplatten/Qt/5.14.2/Src/qtbase/src/plugins/sqldrivers/config.tests/mysql + cd /Users/simonplatten/Qt/5.14.2/Src/qtbase/src/plugins/sqldrivers/config.tests/mysql && MAKEFLAGS= make clean && MAKEFLAGS= make > rm -f main.o > rm -f *~ core *.core > /Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/clang++ -c -pipe -stdlib=libc++ -O2 -std=gnu++11 -arch x86_64 -isysroot /Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX10.15.sdk -mmacosx-version-min=10.13 -w -fPIC -I. -I/usr/local/opt/openssl/include -I/usr/local/Cellar/mariadb/10.4.6_1/include/mysql -I/usr/local/Cellar/mariadb/10.4.6_1/include -I/Users/simonplatten/Qt/5.14.2/clang_64/mkspecs/macx-clang -o main.o main.cpp > /Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/clang++ -stdlib=libc++ -headerpad_max_install_names -arch x86_64 -Wl,-syslibroot,/Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX10.15.sdk -mmacosx-version-min=10.13 -Wl,-rpath,@executable_path/../Frameworks -o mysql main.o -L/usr/local/Cellar/mariadb/10.4.6_1/lib -lmariadb -lz -liconv -lssl -lcrypto > ld: library not found for -lssl > clang: error: linker command failed with exit code 1 (use -v to see invocation) > make: *** [mysql] Error 1 => source failed verification. Trying source 4 (type inline) of library mysql ... mysql.h not found in [/usr/local/include] and global paths. => source produced no result. Trying source 5 (type inline) of library mysql ... => source failed condition 'config.win32'. Trying source 6 (type inline) of library mysql ... mysql.h not found in [/usr/local/include] and global paths. => source produced no result. test config.sqldrivers.libraries.mysql FAILED loaded result for library config.sqldrivers.libraries.oci Trying source 0 (type inline) of library oci ... => source failed condition 'config.win32'. Trying source 1 (type inline) of library oci ... oci.h not found in [] and global paths. => source produced no result. test config.sqldrivers.libraries.oci FAILED loaded result for library config.sqldrivers.libraries.odbc Trying source 0 (type inline) of library odbc ... => source failed condition 'config.win32'. Trying source 1 (type inline) of library odbc ... sql.h not found in [] and global paths. sqlext.h not found in [] and global paths. => source produced no result. Trying source 2 (type inline) of library odbc ... => source failed condition '!config.win32 && !config.darwin'. test config.sqldrivers.libraries.odbc FAILED loaded result for library config.sqldrivers.libraries.psql Trying source 0 (type pkgConfig) of library psql ... pkg-config use disabled globally. => source produced no result. Trying source 1 (type psqlConfig) of library psql ... pg_config not found. => source produced no result. Trying source 2 (type psqlEnv) of library psql ... => source failed condition 'config.win32'. Trying source 3 (type psqlEnv) of library psql ... libpq-fe.h not found in [] and global paths. => source produced no result. test config.sqldrivers.libraries.psql FAILED loaded result for library config.sqldrivers.libraries.sqlite2 Trying source 0 (type inline) of library sqlite2 ... sqlite.h not found in [] and global paths. => source produced no result. test config.sqldrivers.libraries.sqlite2 FAILED loaded result for library config.sqldrivers.libraries.tds Trying source 0 (type sybaseEnv) of library tds ... => source failed condition 'config.win32'. Trying source 1 (type sybaseEnv) of library tds ... + cd /Users/simonplatten/Qt/5.14.2/Src/qtbase/src/plugins/sqldrivers/config.tests/tds && /Users/simonplatten/Qt/5.14.2/clang_64/bin/qmake "CONFIG -= qt debug_and_release app_bundle lib_bundle" "CONFIG += shared warn_off console single_arch" 'INCLUDEPATH += /usr/local/opt/openssl/include' 'QMAKE_USE += tds' 'QMAKE_LIBS_TDS = -lsybdb' /Users/simonplatten/Qt/5.14.2/Src/qtbase/src/plugins/sqldrivers/config.tests/tds + cd /Users/simonplatten/Qt/5.14.2/Src/qtbase/src/plugins/sqldrivers/config.tests/tds && MAKEFLAGS= make > /Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/clang++ -c -pipe -stdlib=libc++ -O2 -std=gnu++11 -arch x86_64 -isysroot /Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX10.15.sdk -mmacosx-version-min=10.13 -w -fPIC -I. -I/usr/local/opt/openssl/include -I/Users/simonplatten/Qt/5.14.2/clang_64/mkspecs/macx-clang -o main.o main.cpp > main.cpp:2:10: fatal error: 'sybfront.h' file not found > #include <sybfront.h> > ^~~~~~~~~~~~ > 1 error generated. > make: *** [main.o] Error 1 => source failed verification. test config.sqldrivers.libraries.tds FAILED@SPlatten said in Set-up MariaDB library file location programmatically?:
install: libfreetype-dev: No such file or directory
Name on your system can be different, simply search for freetype.
Undefined symbols for architecture x86_64: > "_mysql_get_client_version", referenced from: > _main in main.o > ld: symbol(s) not found for architecture x86_64/usr/local/Cellar/mariadb/10.4.6_1/lib/* - is this a x86_64 binary?
-
@jsulm , I searched for freetype on my system:
find / -name freetypeand found nothing.
The contents of /usr/local/Cellar/mariadb/10.4.6_1/lib:
total 1152 -rw-r--r-- 1 simonplatten staff 230704 28 Sep 2019 libmariadb.3.dylib lrwxr-xr-x 1 simonplatten staff 18 17 Jun 2019 libmariadb.dylib -> libmariadb.3.dylib -rw-r--r-- 1 simonplatten staff 336264 17 Jun 2019 libmariadbclient.a lrwxr-xr-x 1 simonplatten staff 18 17 Jun 2019 libmysqlclient.a -> libmariadbclient.a lrwxr-xr-x 1 simonplatten staff 18 17 Jun 2019 libmysqlclient.dylib -> libmariadb.3.dylib lrwxr-xr-x 1 simonplatten staff 18 17 Jun 2019 libmysqlclient_r.a -> libmariadbclient.a lrwxr-xr-x 1 simonplatten staff 18 17 Jun 2019 libmysqlclient_r.dylib -> libmariadb.3.dylib -r--r--r-- 1 simonplatten staff 12400 17 Jun 2019 libmysqlservices.a drwxr-xr-x 3 simonplatten staff 96 28 Sep 2019 pkgconfig drwxr-xr-x 49 simonplatten staff 1568 17 Jun 2019 pluginKind Regards,
Sy -
@jsulm , I searched for freetype on my system:
find / -name freetypeand found nothing.
The contents of /usr/local/Cellar/mariadb/10.4.6_1/lib:
total 1152 -rw-r--r-- 1 simonplatten staff 230704 28 Sep 2019 libmariadb.3.dylib lrwxr-xr-x 1 simonplatten staff 18 17 Jun 2019 libmariadb.dylib -> libmariadb.3.dylib -rw-r--r-- 1 simonplatten staff 336264 17 Jun 2019 libmariadbclient.a lrwxr-xr-x 1 simonplatten staff 18 17 Jun 2019 libmysqlclient.a -> libmariadbclient.a lrwxr-xr-x 1 simonplatten staff 18 17 Jun 2019 libmysqlclient.dylib -> libmariadb.3.dylib lrwxr-xr-x 1 simonplatten staff 18 17 Jun 2019 libmysqlclient_r.a -> libmariadbclient.a lrwxr-xr-x 1 simonplatten staff 18 17 Jun 2019 libmysqlclient_r.dylib -> libmariadb.3.dylib -r--r--r-- 1 simonplatten staff 12400 17 Jun 2019 libmysqlservices.a drwxr-xr-x 3 simonplatten staff 96 28 Sep 2019 pkgconfig drwxr-xr-x 49 simonplatten staff 1568 17 Jun 2019 plugin@SPlatten said in Set-up MariaDB library file location programmatically?:
find / -name freetype
I don't mean searching in the filesystem. I mean searching in the package manager.
"The contents of /usr/local/Cellar/mariadb/10.4.6_1/lib:" - this does not answer the question.
Please do:file /usr/local/Cellar/mariadb/10.4.6_1/lib/libmariadb.3.dylibAnd post the output.
Also it can be that MariaDB can't be used with Qt as the error message says that "_mysql_get_client_version" symbol is not defined, but I'm not sure.
-
@jsulm said in Set-up MariaDB library file location programmatically?:
file /usr/local/Cellar/mariadb/10.4.6_1/lib/libmariadb.3.dylib
/usr/local/Cellar/mariadb/10.4.6_1/lib/libmariadb.3.dylib: Mach-O 64-bit dynamically linked shared library x86_64I'm sure I've been through this process a few years ago using MariaDB...I just wish I've made some good notes...its a mystery to me MariaDB seems to be exactly the same as MySQL in everyday with the exception of the outside world knowing it as MariaDB, internally the files are still called mySQL, which I'm unsure quite how the author got away with this as Oracle are normally very hot on licensing.
-
Found this post:
https://forum.qt.io/topic/90065/how-to-create-the-plugin-of-mariadb-for-qt5/19
And have adapted the qmake command to match my system:
qmake -- MYSQL_INCDIR=/usr/local/Cellar/mariadb/10.4.6_1/include/mysql "MYSQL_LIBDIR=/usr/local/Cellar/mariadb/10.4.6_1/lib" MYSQL_LIBS="-llibmariadb"I'm not sure if libmariadb is correct, the paths are correct.
Kind Regards,
Sy -
Found this post:
https://forum.qt.io/topic/90065/how-to-create-the-plugin-of-mariadb-for-qt5/19
And have adapted the qmake command to match my system:
qmake -- MYSQL_INCDIR=/usr/local/Cellar/mariadb/10.4.6_1/include/mysql "MYSQL_LIBDIR=/usr/local/Cellar/mariadb/10.4.6_1/lib" MYSQL_LIBS="-llibmariadb"I'm not sure if libmariadb is correct, the paths are correct.
@SPlatten said in Set-up MariaDB library file location programmatically?:
MYSQL_LIBS="-llibmariadb"
This should be
MYSQL_LIBS="-lmariadb" -
@jsulm, Thank you, it still looks like its only set-up for SQLite:
simonplatten@Simons-iMac sqldrivers % $QTDIRBIN/qmake -- MYSQL_INCDIR=/usr/local/Cellar/mariadb/10.4.6_1/include/mysql "MYSQL_LIBDIR=/usr/local/Cellar/mariadb/10.4.6_1/lib" MYSQL_LIBS="-lmariadb" Running configuration tests... Done running configuration tests. Configure summary: Qt Sql Drivers: DB2 (IBM) .............................. no InterBase .............................. no MySql .................................. no OCI (Oracle) ........................... no ODBC ................................... no PostgreSQL ............................. no SQLite2 ................................ no SQLite ................................. yes Using system provided SQLite ......... no TDS (Sybase) ........................... no Qt is now configured for building. Just run 'make'. Once everything is built, you must run 'make install'. Qt will be installed into '/Users/simonplatten/Qt/5.14.2/clang_64'. Prior to reconfiguration, make sure you remove any leftovers from the previous build.Kind Regards,
Sy -
@jsulm, Thank you, it still looks like its only set-up for SQLite:
simonplatten@Simons-iMac sqldrivers % $QTDIRBIN/qmake -- MYSQL_INCDIR=/usr/local/Cellar/mariadb/10.4.6_1/include/mysql "MYSQL_LIBDIR=/usr/local/Cellar/mariadb/10.4.6_1/lib" MYSQL_LIBS="-lmariadb" Running configuration tests... Done running configuration tests. Configure summary: Qt Sql Drivers: DB2 (IBM) .............................. no InterBase .............................. no MySql .................................. no OCI (Oracle) ........................... no ODBC ................................... no PostgreSQL ............................. no SQLite2 ................................ no SQLite ................................. yes Using system provided SQLite ......... no TDS (Sybase) ........................... no Qt is now configured for building. Just run 'make'. Once everything is built, you must run 'make install'. Qt will be installed into '/Users/simonplatten/Qt/5.14.2/clang_64'. Prior to reconfiguration, make sure you remove any leftovers from the previous build. -
As before I don't see a configure.log, but there is a config.log:
simonplatten@Simons-iMac sqldrivers % cat config.log Command line: MYSQL_INCDIR=/usr/local/Cellar/mariadb/10.4.6_1/include/mysql MYSQL_LIBDIR=/usr/local/Cellar/mariadb/10.4.6_1/lib MYSQL_LIBS=-lmariadb Global lib dirs: [] [/Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX10.15.sdk/usr/lib] Global inc dirs: [/usr/local/opt/openssl/include] [/Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/include/c++/v1 /Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/lib/clang/11.0.3/include /Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX10.15.sdk/usr/include /Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/include] loaded result for library config.sqldrivers.libraries.db2 Trying source 0 (type inline) of library db2 ... => source failed condition 'config.win32'. Trying source 1 (type inline) of library db2 ... sqlcli.h not found in [] and global paths. sqlcli1.h not found in [] and global paths. => source produced no result. test config.sqldrivers.libraries.db2 FAILED loaded result for library config.sqldrivers.libraries.ibase Trying source 0 (type inline) of library ibase ... => source failed condition 'config.win32'. Trying source 1 (type inline) of library ibase ... ibase.h not found in [] and global paths. => source produced no result. test config.sqldrivers.libraries.ibase FAILED loaded result for library config.sqldrivers.libraries.mysql Trying source 0 (type mysqlConfig) of library mysql ... + /usr/local/bin/mysql_config --version > 10.4.6 + /usr/local/bin/mysql_config --libs_r > -L/usr/local/Cellar/mariadb/10.4.6_1/lib -lmariadb -lz -liconv -lssl -lcrypto + /usr/local/bin/mysql_config --include > -I/usr/local/Cellar/mariadb/10.4.6_1/include/mysql -I/usr/local/Cellar/mariadb/10.4.6_1/include/mysql/.. + cd /Users/simonplatten/Qt/5.14.2/Src/qtbase/src/plugins/sqldrivers/config.tests/mysql && /Users/simonplatten/Qt/5.14.2/clang_64/bin/qmake "CONFIG -= qt debug_and_release app_bundle lib_bundle" "CONFIG += shared warn_off console single_arch" 'INCLUDEPATH += /usr/local/opt/openssl/include' 'QMAKE_USE += mysql' 'QMAKE_LIBS_MYSQL = -L/usr/local/Cellar/mariadb/10.4.6_1/lib' 'QMAKE_INCDIR_MYSQL = /usr/local/Cellar/mariadb/10.4.6_1/include/mysql /usr/local/Cellar/mariadb/10.4.6_1/include' /Users/simonplatten/Qt/5.14.2/Src/qtbase/src/plugins/sqldrivers/config.tests/mysql > Info: creating stash file /Users/simonplatten/Qt/5.14.2/Src/qtbase/src/plugins/sqldrivers/config.tests/.qmake.stash + cd /Users/simonplatten/Qt/5.14.2/Src/qtbase/src/plugins/sqldrivers/config.tests/mysql && MAKEFLAGS= make > /Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/clang++ -c -pipe -stdlib=libc++ -O2 -std=gnu++11 -arch x86_64 -isysroot /Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX10.15.sdk -mmacosx-version-min=10.13 -w -fPIC -I. -I/usr/local/opt/openssl/include -I/usr/local/Cellar/mariadb/10.4.6_1/include/mysql -I/usr/local/Cellar/mariadb/10.4.6_1/include -I/Users/simonplatten/Qt/5.14.2/clang_64/mkspecs/macx-clang -o main.o main.cpp > /Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/clang++ -stdlib=libc++ -headerpad_max_install_names -arch x86_64 -Wl,-syslibroot,/Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX10.15.sdk -mmacosx-version-min=10.13 -Wl,-rpath,@executable_path/../Frameworks -o mysql main.o -L/usr/local/Cellar/mariadb/10.4.6_1/lib > Undefined symbols for architecture x86_64: > "_mysql_get_client_version", referenced from: > _main in main.o > ld: symbol(s) not found for architecture x86_64 > clang: error: linker command failed with exit code 1 (use -v to see invocation) > make: *** [mysql] Error 1 => source failed verification. Trying source 1 (type mysqlConfig) of library mysql ... + /usr/local/bin/mysql_config --version > 10.4.6 + /usr/local/bin/mysql_config --libs > -L/usr/local/Cellar/mariadb/10.4.6_1/lib -lmariadb -lz -liconv -lssl -lcrypto + /usr/local/bin/mysql_config --include > -I/usr/local/Cellar/mariadb/10.4.6_1/include/mysql -I/usr/local/Cellar/mariadb/10.4.6_1/include/mysql/.. + cd /Users/simonplatten/Qt/5.14.2/Src/qtbase/src/plugins/sqldrivers/config.tests/mysql && /Users/simonplatten/Qt/5.14.2/clang_64/bin/qmake "CONFIG -= qt debug_and_release app_bundle lib_bundle" "CONFIG += shared warn_off console single_arch" 'INCLUDEPATH += /usr/local/opt/openssl/include' 'QMAKE_USE += mysql' 'QMAKE_LIBS_MYSQL = -L/usr/local/Cellar/mariadb/10.4.6_1/lib' 'QMAKE_INCDIR_MYSQL = /usr/local/Cellar/mariadb/10.4.6_1/include/mysql /usr/local/Cellar/mariadb/10.4.6_1/include' /Users/simonplatten/Qt/5.14.2/Src/qtbase/src/plugins/sqldrivers/config.tests/mysql + cd /Users/simonplatten/Qt/5.14.2/Src/qtbase/src/plugins/sqldrivers/config.tests/mysql && MAKEFLAGS= make clean && MAKEFLAGS= make > rm -f main.o > rm -f *~ core *.core > /Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/clang++ -c -pipe -stdlib=libc++ -O2 -std=gnu++11 -arch x86_64 -isysroot /Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX10.15.sdk -mmacosx-version-min=10.13 -w -fPIC -I. -I/usr/local/opt/openssl/include -I/usr/local/Cellar/mariadb/10.4.6_1/include/mysql -I/usr/local/Cellar/mariadb/10.4.6_1/include -I/Users/simonplatten/Qt/5.14.2/clang_64/mkspecs/macx-clang -o main.o main.cpp > /Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/clang++ -stdlib=libc++ -headerpad_max_install_names -arch x86_64 -Wl,-syslibroot,/Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX10.15.sdk -mmacosx-version-min=10.13 -Wl,-rpath,@executable_path/../Frameworks -o mysql main.o -L/usr/local/Cellar/mariadb/10.4.6_1/lib > Undefined symbols for architecture x86_64: > "_mysql_get_client_version", referenced from: > _main in main.o > ld: symbol(s) not found for architecture x86_64 > clang: error: linker command failed with exit code 1 (use -v to see invocation) > make: *** [mysql] Error 1 => source failed verification. Trying source 2 (type mysqlConfig) of library mysql ... + /usr/local/bin/mysql_config --version > 10.4.6 + /usr/local/bin/mysql_config --libs_r > -L/usr/local/Cellar/mariadb/10.4.6_1/lib -lmariadb -lz -liconv -lssl -lcrypto + /usr/local/bin/mysql_config --include > -I/usr/local/Cellar/mariadb/10.4.6_1/include/mysql -I/usr/local/Cellar/mariadb/10.4.6_1/include/mysql/.. + cd /Users/simonplatten/Qt/5.14.2/Src/qtbase/src/plugins/sqldrivers/config.tests/mysql && /Users/simonplatten/Qt/5.14.2/clang_64/bin/qmake "CONFIG -= qt debug_and_release app_bundle lib_bundle" "CONFIG += shared warn_off console single_arch" 'INCLUDEPATH += /usr/local/opt/openssl/include' 'QMAKE_USE += mysql' 'QMAKE_LIBS_MYSQL = -L/usr/local/Cellar/mariadb/10.4.6_1/lib -lmariadb -lz -liconv -lssl -lcrypto' 'QMAKE_INCDIR_MYSQL = /usr/local/Cellar/mariadb/10.4.6_1/include/mysql /usr/local/Cellar/mariadb/10.4.6_1/include' /Users/simonplatten/Qt/5.14.2/Src/qtbase/src/plugins/sqldrivers/config.tests/mysql + cd /Users/simonplatten/Qt/5.14.2/Src/qtbase/src/plugins/sqldrivers/config.tests/mysql && MAKEFLAGS= make clean && MAKEFLAGS= make > rm -f main.o > rm -f *~ core *.core > /Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/clang++ -c -pipe -stdlib=libc++ -O2 -std=gnu++11 -arch x86_64 -isysroot /Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX10.15.sdk -mmacosx-version-min=10.13 -w -fPIC -I. -I/usr/local/opt/openssl/include -I/usr/local/Cellar/mariadb/10.4.6_1/include/mysql -I/usr/local/Cellar/mariadb/10.4.6_1/include -I/Users/simonplatten/Qt/5.14.2/clang_64/mkspecs/macx-clang -o main.o main.cpp > /Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/clang++ -stdlib=libc++ -headerpad_max_install_names -arch x86_64 -Wl,-syslibroot,/Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX10.15.sdk -mmacosx-version-min=10.13 -Wl,-rpath,@executable_path/../Frameworks -o mysql main.o -L/usr/local/Cellar/mariadb/10.4.6_1/lib -lmariadb -lz -liconv -lssl -lcrypto > ld: library not found for -lssl > clang: error: linker command failed with exit code 1 (use -v to see invocation) > make: *** [mysql] Error 1 => source failed verification. Trying source 3 (type mysqlConfig) of library mysql ... + /usr/local/bin/mysql_config --version > 10.4.6 + /usr/local/bin/mysql_config --libs > -L/usr/local/Cellar/mariadb/10.4.6_1/lib -lmariadb -lz -liconv -lssl -lcrypto + /usr/local/bin/mysql_config --include > -I/usr/local/Cellar/mariadb/10.4.6_1/include/mysql -I/usr/local/Cellar/mariadb/10.4.6_1/include/mysql/.. + cd /Users/simonplatten/Qt/5.14.2/Src/qtbase/src/plugins/sqldrivers/config.tests/mysql && /Users/simonplatten/Qt/5.14.2/clang_64/bin/qmake "CONFIG -= qt debug_and_release app_bundle lib_bundle" "CONFIG += shared warn_off console single_arch" 'INCLUDEPATH += /usr/local/opt/openssl/include' 'QMAKE_USE += mysql' 'QMAKE_LIBS_MYSQL = -L/usr/local/Cellar/mariadb/10.4.6_1/lib -lmariadb -lz -liconv -lssl -lcrypto' 'QMAKE_INCDIR_MYSQL = /usr/local/Cellar/mariadb/10.4.6_1/include/mysql /usr/local/Cellar/mariadb/10.4.6_1/include' /Users/simonplatten/Qt/5.14.2/Src/qtbase/src/plugins/sqldrivers/config.tests/mysql + cd /Users/simonplatten/Qt/5.14.2/Src/qtbase/src/plugins/sqldrivers/config.tests/mysql && MAKEFLAGS= make clean && MAKEFLAGS= make > rm -f main.o > rm -f *~ core *.core > /Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/clang++ -c -pipe -stdlib=libc++ -O2 -std=gnu++11 -arch x86_64 -isysroot /Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX10.15.sdk -mmacosx-version-min=10.13 -w -fPIC -I. -I/usr/local/opt/openssl/include -I/usr/local/Cellar/mariadb/10.4.6_1/include/mysql -I/usr/local/Cellar/mariadb/10.4.6_1/include -I/Users/simonplatten/Qt/5.14.2/clang_64/mkspecs/macx-clang -o main.o main.cpp > /Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/clang++ -stdlib=libc++ -headerpad_max_install_names -arch x86_64 -Wl,-syslibroot,/Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX10.15.sdk -mmacosx-version-min=10.13 -Wl,-rpath,@executable_path/../Frameworks -o mysql main.o -L/usr/local/Cellar/mariadb/10.4.6_1/lib -lmariadb -lz -liconv -lssl -lcrypto > ld: library not found for -lssl > clang: error: linker command failed with exit code 1 (use -v to see invocation) > make: *** [mysql] Error 1 => source failed verification. Trying source 4 (type inline) of library mysql ... mysql.h not found in [/usr/local/include] and global paths. => source produced no result. Trying source 5 (type inline) of library mysql ... => source failed condition 'config.win32'. Trying source 6 (type inline) of library mysql ... mysql.h not found in [/usr/local/include] and global paths. => source produced no result. test config.sqldrivers.libraries.mysql FAILED loaded result for library config.sqldrivers.libraries.oci Trying source 0 (type inline) of library oci ... => source failed condition 'config.win32'. Trying source 1 (type inline) of library oci ... oci.h not found in [] and global paths. => source produced no result. test config.sqldrivers.libraries.oci FAILED loaded result for library config.sqldrivers.libraries.odbc Trying source 0 (type inline) of library odbc ... => source failed condition 'config.win32'. Trying source 1 (type inline) of library odbc ... sql.h not found in [] and global paths. sqlext.h not found in [] and global paths. => source produced no result. Trying source 2 (type inline) of library odbc ... => source failed condition '!config.win32 && !config.darwin'. test config.sqldrivers.libraries.odbc FAILED loaded result for library config.sqldrivers.libraries.psql Trying source 0 (type pkgConfig) of library psql ... pkg-config use disabled globally. => source produced no result. Trying source 1 (type psqlConfig) of library psql ... pg_config not found. => source produced no result. Trying source 2 (type psqlEnv) of library psql ... => source failed condition 'config.win32'. Trying source 3 (type psqlEnv) of library psql ... libpq-fe.h not found in [] and global paths. => source produced no result. test config.sqldrivers.libraries.psql FAILED loaded result for library config.sqldrivers.libraries.sqlite2 Trying source 0 (type inline) of library sqlite2 ... sqlite.h not found in [] and global paths. => source produced no result. test config.sqldrivers.libraries.sqlite2 FAILED loaded result for library config.sqldrivers.libraries.tds Trying source 0 (type sybaseEnv) of library tds ... => source failed condition 'config.win32'. Trying source 1 (type sybaseEnv) of library tds ... + cd /Users/simonplatten/Qt/5.14.2/Src/qtbase/src/plugins/sqldrivers/config.tests/tds && /Users/simonplatten/Qt/5.14.2/clang_64/bin/qmake "CONFIG -= qt debug_and_release app_bundle lib_bundle" "CONFIG += shared warn_off console single_arch" 'INCLUDEPATH += /usr/local/opt/openssl/include' 'QMAKE_USE += tds' 'QMAKE_LIBS_TDS = -lsybdb' /Users/simonplatten/Qt/5.14.2/Src/qtbase/src/plugins/sqldrivers/config.tests/tds + cd /Users/simonplatten/Qt/5.14.2/Src/qtbase/src/plugins/sqldrivers/config.tests/tds && MAKEFLAGS= make > /Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/clang++ -c -pipe -stdlib=libc++ -O2 -std=gnu++11 -arch x86_64 -isysroot /Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX10.15.sdk -mmacosx-version-min=10.13 -w -fPIC -I. -I/usr/local/opt/openssl/include -I/Users/simonplatten/Qt/5.14.2/clang_64/mkspecs/macx-clang -o main.o main.cpp > main.cpp:2:10: fatal error: 'sybfront.h' file not found > #include <sybfront.h> > ^~~~~~~~~~~~ > 1 error generated. > make: *** [main.o] Error 1 => source failed verification. test config.sqldrivers.libraries.tds FAILED -
brew install openssl Updating Homebrew... ==> Auto-updated Homebrew! Updated 1 tap (homebrew/core). ==> New Formulae k9s ==> Updated Formulae agedu broot elvish gmt kustomize pgrouting serve swiftgen vulkan-headers artifactory catch2 erlang grap libmicrohttpd pnpm snapcraft tnftp benthos duplicity fluent-bit heimdal mdcat quickjs sphinx-doc unnethack bit dwarfutils git-town helmfile mpg123 rsync sratoolkit vttest Error: openssl@1.1 1.1.1d is already installed To upgrade to 1.1.1g, run `brew upgrade openssl@1.1` simonplatten@Simons-iMac sqldrivers % -
Hi, I just tried the same, i.e. brew install mariadb and it worked 1st try:
~/Qt/5.15.0/clang_64/bin/qmake -- MYSQL_INCDIR=/usr/local/Cellar/mariadb/10.4.13/include/mysql "MYSQL_LIBDIR=/usr/local/Cellar/mariadb/10.4.13/lib" MYSQL_LIBS="-lmariadb" Info: creating stash file /Users/henry/Downloads/qt-everywhere-src-5.15.0/qtbase/src/plugins/sqldrivers/.qmake.stash Running configuration tests... Checking for DB2 (IBM)... no Checking for InterBase... no Checking for MySQL... yes Checking for OCI (Oracle)... no Checking for ODBC... no Checking for PostgreSQL... no Checking for SQLite (version 2)... no Checking for TDS (Sybase)... no Done running configuration tests. Configure summary: Qt Sql Drivers: DB2 (IBM) .............................. no InterBase .............................. no MySql .................................. yes OCI (Oracle) ........................... no ODBC ................................... no PostgreSQL ............................. no SQLite2 ................................ no SQLite ................................. yes Using system provided SQLite ......... no TDS (Sybase) ........................... no Qt is now configured for building. Just run 'make'. Once everything is built, you must run 'make install'. Qt will be installed into '/Users/henry/Qt/5.15.0/clang_64'. Prior to reconfiguration, make sure you remove any leftovers from the previous build.and the config.log file: (just the interesting/good part):
... ... Trying source 4 (type inline) of library mysql ... + cd /Users/henry/Downloads/qt-everywhere-src-5.15.0/qtbase/src/plugins/sqldrivers/config.tests/mysql && /Users/henry/Qt/5.15.0/clang_64/bin/qmake "CONFIG -= qt debug_and_release app_bundle lib_bundle" "CONFIG += shared warn_off console single_arch" 'INCLUDEPATH += /usr/local/opt/openssl/include' 'QMAKE_USE += mysql' 'QMAKE_LIBS_MYSQL = -L/usr/local/Cellar/mariadb/10.4.13/lib -lmariadb' 'QMAKE_INCDIR_MYSQL = /usr/local/Cellar/mariadb/10.4.13/include/mysql' /Users/henry/Downloads/qt-everywhere-src-5.15.0/qtbase/src/plugins/sqldrivers/config.tests/mysql + cd /Users/henry/Downloads/qt-everywhere-src-5.15.0/qtbase/src/plugins/sqldrivers/config.tests/mysql && MAKEFLAGS= make clean && MAKEFLAGS= make > rm -f main.o > rm -f *~ core *.core > /Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/clang++ -c -pipe -stdlib=libc++ -O2 -std=gnu++11 -arch x86_64 -isysroot /Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX10.15.sdk -mmacosx-version-min=10.13 -w -fPIC -I. -I/usr/local/opt/openssl/include -I/usr/local/Cellar/mariadb/10.4.13/include/mysql -I/Users/henry/Qt/5.15.0/clang_64/mkspecs/macx-clang -o main.o main.cpp > /Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/clang++ -stdlib=libc++ -headerpad_max_install_names -arch x86_64 -isysroot /Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX10.15.sdk -mmacosx-version-min=10.13 -Wl,-rpath,@executable_path/../Frameworks -o mysql main.o -L/usr/local/Cellar/mariadb/10.4.13/lib -lmariadb => source accepted. test config.sqldrivers.libraries.mysql succeeded ... ...The only difference I can see, is that I got mariadb version 10.4.13 but you have 10.4.6._1 maybe you can upgrade?
Edit: added the good parts of the log :-)
-
Thank you:
simonplatten@Simons-iMac bin % brew install unixodbc ==> Downloading https://homebrew.bintray.com/bottles/libtool-2.4.6_2.catalina.bottle.tar.gz ==> Downloading from https://d29vzk4ow07wi7.cloudfront.net/af317b35d0a394b7ef55fba4950735b0392d9f31bececebf9c412261c23a01 ######################################################################## 100.0% ==> Downloading https://homebrew.bintray.com/bottles/unixodbc-2.3.7.catalina.bottle.1.tar.gz ==> Downloading from https://akamai.bintray.com/03/03ba378d971af98d07652f978548ffacb4c155ba11dd36af9d46af36e2d5674b?__gda ######################################################################## 100.0% ==> Installing dependencies for unixodbc: libtool ==> Installing unixodbc dependency: libtool ==> Pouring libtool-2.4.6_2.catalina.bottle.tar.gz ==> Caveats In order to prevent conflicts with Apple's own libtool we have prepended a "g" so, you have instead: glibtool and glibtoolize. ==> Summary 🍺 /usr/local/Cellar/libtool/2.4.6_2: 71 files, 3.7MB ==> Installing unixodbc ==> Pouring unixodbc-2.3.7.catalina.bottle.1.tar.gz 🍺 /usr/local/Cellar/unixodbc/2.3.7: 46 files, 1.9MB ==> `brew cleanup` has not been run in 30 days, running now... Removing: /Users/simonplatten/Library/Caches/Homebrew/gettext--0.20.1.mojave.bottle.tar.gz... (8.4MB) Removing: /Users/simonplatten/Library/Caches/Homebrew/git--2.23.0_1.mojave.bottle.tar.gz... (17.1MB) Removing: /usr/local/Cellar/libtool/2.4.6_1... (70 files, 3.7MB) Removing: /Users/simonplatten/Library/Caches/Homebrew/mariadb--10.4.6_1.mojave.bottle.tar.gz... (48.6MB) Removing: /Users/simonplatten/Library/Caches/Homebrew/openssl@1.1--1.1.1d.mojave.bottle.tar.gz... (5.2MB) Removing: /Users/simonplatten/Library/Caches/Homebrew/pcre2--10.33.mojave.bottle.tar.gz... (1.9MB) Removing: /Users/simonplatten/Library/Logs/Homebrew/mariadb... (64B) Removing: /Users/simonplatten/Library/Logs/Homebrew/gettext... (64B) Removing: /Users/simonplatten/Library/Logs/Homebrew/pcre2... (64B) Removing: /Users/simonplatten/Library/Logs/Homebrew/openssl@1.1... (64B) Removing: /Users/simonplatten/Library/Logs/Homebrew/git... (64B) Pruned 0 symbolic links and 4 directories from /usr/local ==> Caveats ==> libtool In order to prevent conflicts with Apple's own libtool we have prepended a "g" so, you have instead: glibtool and glibtoolize. -
After all that:
simonplatten@Simons-iMac bin % cd $QTDIR/Src/qtbase/src/plugins/sqldrivers simonplatten@Simons-iMac sqldrivers % $QTDIRBIN/qmake -- MYSQL_INCDIR="/usr/local/Cellar/mariadb/10.4.6_1/include/mysql" "MYSQL_LIBDIR=/usr/local/Cellar/mariadb/10.4.6_1/lib" MYSQL_LIBS="-lmariadb" Running configuration tests... Done running configuration tests. Configure summary: Qt Sql Drivers: DB2 (IBM) .............................. no InterBase .............................. no MySql .................................. no OCI (Oracle) ........................... no ODBC ................................... no PostgreSQL ............................. no SQLite2 ................................ no SQLite ................................. yes Using system provided SQLite ......... no TDS (Sybase) ........................... no Qt is now configured for building. Just run 'make'. Once everything is built, you must run 'make install'. Qt will be installed into '/Users/simonplatten/Qt/5.14.2/clang_64'. Prior to reconfiguration, make sure you remove any leftovers from the previous build. -
simonplatten@Simons-iMac sqldrivers % cat config.log Command line: MYSQL_INCDIR=/usr/local/Cellar/mariadb/10.4.6_1/include/mysql MYSQL_LIBDIR=/usr/local/Cellar/mariadb/10.4.6_1/lib MYSQL_LIBS=-lmariadb Global lib dirs: [] [/Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX10.15.sdk/usr/lib] Global inc dirs: [/usr/local/opt/openssl/include] [/Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/include/c++/v1 /Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/lib/clang/11.0.3/include /Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX10.15.sdk/usr/include /Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/include] loaded result for library config.sqldrivers.libraries.db2 Trying source 0 (type inline) of library db2 ... => source failed condition 'config.win32'. Trying source 1 (type inline) of library db2 ... sqlcli.h not found in [] and global paths. sqlcli1.h not found in [] and global paths. => source produced no result. test config.sqldrivers.libraries.db2 FAILED loaded result for library config.sqldrivers.libraries.ibase Trying source 0 (type inline) of library ibase ... => source failed condition 'config.win32'. Trying source 1 (type inline) of library ibase ... ibase.h not found in [] and global paths. => source produced no result. test config.sqldrivers.libraries.ibase FAILED loaded result for library config.sqldrivers.libraries.mysql Trying source 0 (type mysqlConfig) of library mysql ... + /usr/local/bin/mysql_config --version > 10.4.6 + /usr/local/bin/mysql_config --libs_r > -L/usr/local/Cellar/mariadb/10.4.6_1/lib -lmariadb -lz -liconv -lssl -lcrypto + /usr/local/bin/mysql_config --include > -I/usr/local/Cellar/mariadb/10.4.6_1/include/mysql -I/usr/local/Cellar/mariadb/10.4.6_1/include/mysql/.. + cd /Users/simonplatten/Qt/5.14.2/Src/qtbase/src/plugins/sqldrivers/config.tests/mysql && /Users/simonplatten/Qt/5.14.2/clang_64/bin/qmake "CONFIG -= qt debug_and_release app_bundle lib_bundle" "CONFIG += shared warn_off console single_arch" 'INCLUDEPATH += /usr/local/opt/openssl/include' 'QMAKE_USE += mysql' 'QMAKE_LIBS_MYSQL = -L/usr/local/Cellar/mariadb/10.4.6_1/lib' 'QMAKE_INCDIR_MYSQL = /usr/local/Cellar/mariadb/10.4.6_1/include/mysql /usr/local/Cellar/mariadb/10.4.6_1/include' /Users/simonplatten/Qt/5.14.2/Src/qtbase/src/plugins/sqldrivers/config.tests/mysql > Info: creating stash file /Users/simonplatten/Qt/5.14.2/Src/qtbase/src/plugins/sqldrivers/config.tests/.qmake.stash + cd /Users/simonplatten/Qt/5.14.2/Src/qtbase/src/plugins/sqldrivers/config.tests/mysql && MAKEFLAGS= make > /Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/clang++ -c -pipe -stdlib=libc++ -O2 -std=gnu++11 -arch x86_64 -isysroot /Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX10.15.sdk -mmacosx-version-min=10.13 -w -fPIC -I. -I/usr/local/opt/openssl/include -I/usr/local/Cellar/mariadb/10.4.6_1/include/mysql -I/usr/local/Cellar/mariadb/10.4.6_1/include -I/Users/simonplatten/Qt/5.14.2/clang_64/mkspecs/macx-clang -o main.o main.cpp > /Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/clang++ -stdlib=libc++ -headerpad_max_install_names -arch x86_64 -Wl,-syslibroot,/Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX10.15.sdk -mmacosx-version-min=10.13 -Wl,-rpath,@executable_path/../Frameworks -o mysql main.o -L/usr/local/Cellar/mariadb/10.4.6_1/lib > Undefined symbols for architecture x86_64: > "_mysql_get_client_version", referenced from: > _main in main.o > ld: symbol(s) not found for architecture x86_64 > clang: error: linker command failed with exit code 1 (use -v to see invocation) > make: *** [mysql] Error 1 => source failed verification. Trying source 1 (type mysqlConfig) of library mysql ... + /usr/local/bin/mysql_config --version > 10.4.6 + /usr/local/bin/mysql_config --libs > -L/usr/local/Cellar/mariadb/10.4.6_1/lib -lmariadb -lz -liconv -lssl -lcrypto + /usr/local/bin/mysql_config --include > -I/usr/local/Cellar/mariadb/10.4.6_1/include/mysql -I/usr/local/Cellar/mariadb/10.4.6_1/include/mysql/.. + cd /Users/simonplatten/Qt/5.14.2/Src/qtbase/src/plugins/sqldrivers/config.tests/mysql && /Users/simonplatten/Qt/5.14.2/clang_64/bin/qmake "CONFIG -= qt debug_and_release app_bundle lib_bundle" "CONFIG += shared warn_off console single_arch" 'INCLUDEPATH += /usr/local/opt/openssl/include' 'QMAKE_USE += mysql' 'QMAKE_LIBS_MYSQL = -L/usr/local/Cellar/mariadb/10.4.6_1/lib' 'QMAKE_INCDIR_MYSQL = /usr/local/Cellar/mariadb/10.4.6_1/include/mysql /usr/local/Cellar/mariadb/10.4.6_1/include' /Users/simonplatten/Qt/5.14.2/Src/qtbase/src/plugins/sqldrivers/config.tests/mysql + cd /Users/simonplatten/Qt/5.14.2/Src/qtbase/src/plugins/sqldrivers/config.tests/mysql && MAKEFLAGS= make clean && MAKEFLAGS= make > rm -f main.o > rm -f *~ core *.core > /Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/clang++ -c -pipe -stdlib=libc++ -O2 -std=gnu++11 -arch x86_64 -isysroot /Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX10.15.sdk -mmacosx-version-min=10.13 -w -fPIC -I. -I/usr/local/opt/openssl/include -I/usr/local/Cellar/mariadb/10.4.6_1/include/mysql -I/usr/local/Cellar/mariadb/10.4.6_1/include -I/Users/simonplatten/Qt/5.14.2/clang_64/mkspecs/macx-clang -o main.o main.cpp > /Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/clang++ -stdlib=libc++ -headerpad_max_install_names -arch x86_64 -Wl,-syslibroot,/Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX10.15.sdk -mmacosx-version-min=10.13 -Wl,-rpath,@executable_path/../Frameworks -o mysql main.o -L/usr/local/Cellar/mariadb/10.4.6_1/lib > Undefined symbols for architecture x86_64: > "_mysql_get_client_version", referenced from: > _main in main.o > ld: symbol(s) not found for architecture x86_64 > clang: error: linker command failed with exit code 1 (use -v to see invocation) > make: *** [mysql] Error 1 => source failed verification. Trying source 2 (type mysqlConfig) of library mysql ... + /usr/local/bin/mysql_config --version > 10.4.6 + /usr/local/bin/mysql_config --libs_r > -L/usr/local/Cellar/mariadb/10.4.6_1/lib -lmariadb -lz -liconv -lssl -lcrypto + /usr/local/bin/mysql_config --include > -I/usr/local/Cellar/mariadb/10.4.6_1/include/mysql -I/usr/local/Cellar/mariadb/10.4.6_1/include/mysql/.. + cd /Users/simonplatten/Qt/5.14.2/Src/qtbase/src/plugins/sqldrivers/config.tests/mysql && /Users/simonplatten/Qt/5.14.2/clang_64/bin/qmake "CONFIG -= qt debug_and_release app_bundle lib_bundle" "CONFIG += shared warn_off console single_arch" 'INCLUDEPATH += /usr/local/opt/openssl/include' 'QMAKE_USE += mysql' 'QMAKE_LIBS_MYSQL = -L/usr/local/Cellar/mariadb/10.4.6_1/lib -lmariadb -lz -liconv -lssl -lcrypto' 'QMAKE_INCDIR_MYSQL = /usr/local/Cellar/mariadb/10.4.6_1/include/mysql /usr/local/Cellar/mariadb/10.4.6_1/include' /Users/simonplatten/Qt/5.14.2/Src/qtbase/src/plugins/sqldrivers/config.tests/mysql + cd /Users/simonplatten/Qt/5.14.2/Src/qtbase/src/plugins/sqldrivers/config.tests/mysql && MAKEFLAGS= make clean && MAKEFLAGS= make > rm -f main.o > rm -f *~ core *.core > /Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/clang++ -c -pipe -stdlib=libc++ -O2 -std=gnu++11 -arch x86_64 -isysroot /Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX10.15.sdk -mmacosx-version-min=10.13 -w -fPIC -I. -I/usr/local/opt/openssl/include -I/usr/local/Cellar/mariadb/10.4.6_1/include/mysql -I/usr/local/Cellar/mariadb/10.4.6_1/include -I/Users/simonplatten/Qt/5.14.2/clang_64/mkspecs/macx-clang -o main.o main.cpp > /Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/clang++ -stdlib=libc++ -headerpad_max_install_names -arch x86_64 -Wl,-syslibroot,/Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX10.15.sdk -mmacosx-version-min=10.13 -Wl,-rpath,@executable_path/../Frameworks -o mysql main.o -L/usr/local/Cellar/mariadb/10.4.6_1/lib -lmariadb -lz -liconv -lssl -lcrypto > ld: library not found for -lssl > clang: error: linker command failed with exit code 1 (use -v to see invocation) > make: *** [mysql] Error 1 => source failed verification. Trying source 3 (type mysqlConfig) of library mysql ... + /usr/local/bin/mysql_config --version > 10.4.6 + /usr/local/bin/mysql_config --libs > -L/usr/local/Cellar/mariadb/10.4.6_1/lib -lmariadb -lz -liconv -lssl -lcrypto + /usr/local/bin/mysql_config --include > -I/usr/local/Cellar/mariadb/10.4.6_1/include/mysql -I/usr/local/Cellar/mariadb/10.4.6_1/include/mysql/.. + cd /Users/simonplatten/Qt/5.14.2/Src/qtbase/src/plugins/sqldrivers/config.tests/mysql && /Users/simonplatten/Qt/5.14.2/clang_64/bin/qmake "CONFIG -= qt debug_and_release app_bundle lib_bundle" "CONFIG += shared warn_off console single_arch" 'INCLUDEPATH += /usr/local/opt/openssl/include' 'QMAKE_USE += mysql' 'QMAKE_LIBS_MYSQL = -L/usr/local/Cellar/mariadb/10.4.6_1/lib -lmariadb -lz -liconv -lssl -lcrypto' 'QMAKE_INCDIR_MYSQL = /usr/local/Cellar/mariadb/10.4.6_1/include/mysql /usr/local/Cellar/mariadb/10.4.6_1/include' /Users/simonplatten/Qt/5.14.2/Src/qtbase/src/plugins/sqldrivers/config.tests/mysql + cd /Users/simonplatten/Qt/5.14.2/Src/qtbase/src/plugins/sqldrivers/config.tests/mysql && MAKEFLAGS= make clean && MAKEFLAGS= make > rm -f main.o > rm -f *~ core *.core > /Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/clang++ -c -pipe -stdlib=libc++ -O2 -std=gnu++11 -arch x86_64 -isysroot /Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX10.15.sdk -mmacosx-version-min=10.13 -w -fPIC -I. -I/usr/local/opt/openssl/include -I/usr/local/Cellar/mariadb/10.4.6_1/include/mysql -I/usr/local/Cellar/mariadb/10.4.6_1/include -I/Users/simonplatten/Qt/5.14.2/clang_64/mkspecs/macx-clang -o main.o main.cpp > /Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/clang++ -stdlib=libc++ -headerpad_max_install_names -arch x86_64 -Wl,-syslibroot,/Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX10.15.sdk -mmacosx-version-min=10.13 -Wl,-rpath,@executable_path/../Frameworks -o mysql main.o -L/usr/local/Cellar/mariadb/10.4.6_1/lib -lmariadb -lz -liconv -lssl -lcrypto > ld: library not found for -lssl > clang: error: linker command failed with exit code 1 (use -v to see invocation) > make: *** [mysql] Error 1 => source failed verification. Trying source 4 (type inline) of library mysql ... mysql.h not found in [/usr/local/include] and global paths. => source produced no result. Trying source 5 (type inline) of library mysql ... => source failed condition 'config.win32'. Trying source 6 (type inline) of library mysql ... mysql.h not found in [/usr/local/include] and global paths. => source produced no result. test config.sqldrivers.libraries.mysql FAILED loaded result for library config.sqldrivers.libraries.oci Trying source 0 (type inline) of library oci ... => source failed condition 'config.win32'. Trying source 1 (type inline) of library oci ... oci.h not found in [] and global paths. => source produced no result. test config.sqldrivers.libraries.oci FAILED loaded result for library config.sqldrivers.libraries.odbc Trying source 0 (type inline) of library odbc ... => source failed condition 'config.win32'. Trying source 1 (type inline) of library odbc ... sql.h not found in [] and global paths. sqlext.h not found in [] and global paths. => source produced no result. Trying source 2 (type inline) of library odbc ... => source failed condition '!config.win32 && !config.darwin'. test config.sqldrivers.libraries.odbc FAILED loaded result for library config.sqldrivers.libraries.psql Trying source 0 (type pkgConfig) of library psql ... pkg-config use disabled globally. => source produced no result. Trying source 1 (type psqlConfig) of library psql ... pg_config not found. => source produced no result. Trying source 2 (type psqlEnv) of library psql ... => source failed condition 'config.win32'. Trying source 3 (type psqlEnv) of library psql ... libpq-fe.h not found in [] and global paths. => source produced no result. test config.sqldrivers.libraries.psql FAILED loaded result for library config.sqldrivers.libraries.sqlite2 Trying source 0 (type inline) of library sqlite2 ... sqlite.h not found in [] and global paths. => source produced no result. test config.sqldrivers.libraries.sqlite2 FAILED loaded result for library config.sqldrivers.libraries.tds Trying source 0 (type sybaseEnv) of library tds ... => source failed condition 'config.win32'. Trying source 1 (type sybaseEnv) of library tds ... + cd /Users/simonplatten/Qt/5.14.2/Src/qtbase/src/plugins/sqldrivers/config.tests/tds && /Users/simonplatten/Qt/5.14.2/clang_64/bin/qmake "CONFIG -= qt debug_and_release app_bundle lib_bundle" "CONFIG += shared warn_off console single_arch" 'INCLUDEPATH += /usr/local/opt/openssl/include' 'QMAKE_USE += tds' 'QMAKE_LIBS_TDS = -lsybdb' /Users/simonplatten/Qt/5.14.2/Src/qtbase/src/plugins/sqldrivers/config.tests/tds + cd /Users/simonplatten/Qt/5.14.2/Src/qtbase/src/plugins/sqldrivers/config.tests/tds && MAKEFLAGS= make > /Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/clang++ -c -pipe -stdlib=libc++ -O2 -std=gnu++11 -arch x86_64 -isysroot /Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX10.15.sdk -mmacosx-version-min=10.13 -w -fPIC -I. -I/usr/local/opt/openssl/include -I/Users/simonplatten/Qt/5.14.2/clang_64/mkspecs/macx-clang -o main.o main.cpp > main.cpp:2:10: fatal error: 'sybfront.h' file not found > #include <sybfront.h> > ^~~~~~~~~~~~ > 1 error generated. > make: *** [main.o] Error 1 => source failed verification. test config.sqldrivers.libraries.tds FAILED
