Building Qt Apps to Wasm

[lorn.potter]

You need to use mingw32-make and not nmake.

[DragonOsman]

The reason for the unknown warning error was a mismatch between the Clang version and the Emscripten version. But after fixing that I have an error from wasm-ld.exe saying that the machine type of library files needs to be wasm32. I don't know what I need to do here so some help would be good. I mentioned this in the Emscripten GitHub as well.

And whether I run nmake or mingw32-make, the result is still pretty much the same: https://gist.github.com/DragonOsman/4b5a04e0546d3ccc21c67cc978510e70

[DragonOsman]

There are errors from wasm-ld.exe saying that there are object files that don't have the machine-type wasm32. The object files generated by running nmake definitely hve wasm code in them, even though wasm-ld is flagging them as well. Which is really weird. I see that the object files that come from the Qt library itself are also getting flagged though. Could you guys verify using wasm-dis if those are also wasm object files? Although there's still a problem there because wasm object files shouldn't even have a machine type--only bitcode files should which these aren't. This is really confusing.

[lorn.potter]

Did you install Emscripten 1.38.27 ? That would be needed for Qt 5.13

[DragonOsman]

@lorn-potter Do I need to do a complete downgrade? I have version 1.39.0 right now. Could that be what's causing the problem with the wasm-ld error saying that my object files aren't of machine-type wasm32?

[lorn.potter]

@DragonOsman said in Building Qt Apps to Wasm:

@lorn-potter Do I need to do a complete downgrade? I have version 1.39.0 right now. Could that be what's causing the problem with the wasm-ld error saying that my object files aren't of machine-type wasm32?

Yes, because 1.39.0 switched to wasm object files by default, where as the older version used fastcomp to build.

You can install a different version alongside 1.39.0:
./emsdk install sdk-1.38.27-64bit

and then to switch to the newly installed version:
./emsdk activate --embedded sdk-1.38.27-64bit

When you want ot use a different version just use the activate line with the correct installed version.

[DragonOsman]

Is the default backend being switched to the Wasm one the only reason? I don't think that would be enough to give those machine-type errors.

I hope Qt 5 will eventually support version 1.38.48 and newer of Emscripten at some point as well.

[DragonOsman]

@lorn-potter Would it be a good idea to get version 1.38.30 instead?

[DragonOsman]

@lorn-potter What's the use of the patch if Qt 5 still can't handle the Wasm backend? The reason for the machine type error from wasm-ld is something else: in later versions of Emscripten, it doesn't generate bitcode for Wasm object files. But for some weird reason wasm-ld still gives an error saying that the machine type of the object files isn't wasm32. That's very strange. Please read my conversation with this LLVM developer on this Emscripten GitHub issue I've opened. It would be good if these problems are fixed so that the Wasm backend on the latest version of Emscripten works well with Qt 5.

And right now I can't install the 1.38.27 SDK itself directly using the Emsdk; I have to install Emscripten, Clang and Binaryen separately through Emsdk and since I want to use my own Node, Python and Java anyway, I don't also get those. I had to use CMake to build and install Binaryen on my own though because what Emsdk did failed for me. When I try to install the SDK through Emsdk directly, I get a System Error Access denied when it unzips the Python zip file and gets to trying to add DLLs to the Emsdk Python installation directory.

Edit: I deleted the old files and tried to configure and build again, but now I have this error: shared:ERROR: fastcomp is not compatible with wasm object files:main.obj. I have Emscripten 1.38.27 now with the asm.js backend, so what's going on now? Why is it generating a Wasm object file? Do I still need to add something to the .conf file so that it won't generate Wasm object files when the asm.js backend is being used?

Also, it probably shouldn't generate Wasm object files with the Wasm backend anyway. Wasm object files aren't standard Wasm files.

Edit: Actually, I should be able to make it work if I build Qt for WebAssembly myself. I just need to know what modules are usually built for Qt 5 for Windows. I'll build those same modules. Except if threading support isn't included in there, then I want to include that as well in addition to the rest of it. What module do I need for threading support?

[DragonOsman]

I want to try to building Qt for WebAssebly again since I think if I had Qt built using the latest version of Emscripten, it may not do what it's not supposed to when using that version of Emscripten. So I want to know how to have it use LLVM 10 installed through the EMSDK and have it generate LLVM bitcode targeting the wasm32 machine type (for that I probably need to know how to pass (multiple) command line arguments to the Clang compiler itself when building Qt). Also, if I want to have it use C++17 rules when building Qt, what should I do? I tried passing the -c++std c++17 argument to configure.bat but it didn't work. Internally it was still using C++11.

I hope someone will help me with that. Thanks in advance.

[lorn.potter]

@DragonOsman If you install emsdk latest (1.39.0), and build Qt, you can get the new wasm object file format by passing -device-option WASM_OBJECT_FILES=1 to Qt configure.

As far as the c++17 support, see this bug I just reported:
https://bugreports.qt.io/browse/QTBUG-79552

[DragonOsman]

Okay, but how can I pass the option to emit LLVM bitcode with machine-type wasm32? Will passing -device-option WASM_OBJECT_FILES=1 to Qt configure like you said be enough? I do want to know where to pass the --emit-llvm and --target=wasm32 flags to Clang.

Also, I heard on the Emscripten GitHub that .obj files with wasm in them aren't standard wasm files. And that Emscripten version 1.38.38 and above isn't supposed to generate it in the first place, especially with the new Wasm backend. The error I was before where wasm-ld.exe was saying that the .obj files don't have machine-type wasm32 was strange for that reason. Also because those object files all had Wasm code in them. wasm-ld.exe was also saying it about object files from the Qt library itself, though, and I don't know where to find them to check if they have Wasm code in them or not. They most likely have it as well though.

I've posted a link to the Emscripten GitHub issue I opened about this on here before. Have you looked at that? If not, then please do.

Also I've added this line to qmake.conf along with the recommended patch: QMAKE_CXXFLAGS_RELEASE += -Xclang --emit-llvm -Xclang --target=wasm32, but is that okay? Or did I make a mistake here? Also, if I add this patch to the Qt I build from source, and then I want to execute git pull, would it be okay to push my changes to the repository? Note: I'll keep the prebuilt binaries too and I try with both. Maybe I can still get this to work.

Edit: One more question: do I need the Qt Web module when targeting Wasm? The one that's takes too long and the documentation says to consider not building it.

[DragonOsman]

This is the error I get now when using prebuilt Qt to build the Notepad project:

wasm-ld: error: notepad.obj: machine type must be wasm32
wasm-ld: error: notepad.js_plugin_import.obj: machine type must be wasm32
wasm-ld: error: moc_notepad.obj: machine type must be wasm32
wasm-ld: error: qapplication.obj: machine type must be wasm32
wasm-ld: error: qwidget.obj: machine type must be wasm32
wasm-ld: error: qwasmlocalfileaccess.obj: machine type must be wasm32
shared:ERROR: 'C:/emsdk/upstream/bin\wasm-ld.exe -o c:\users\osman\appdata\local\temp\emscripten_temp\notepad.wasm --allow-undefined --lto-O0 main.obj notepad.obj -LC:\emsdk\upstream\emscripten\system\local\lib notepad.js_plugin_import.obj -LC:\emsdk\upstream\emscripten\system\lib moc_notepad.obj -LC:\Users\Osman\.emscripten_cache\wasm-obj C:/Qt/5.13.1/wasm_32/plugins/platforms/libqwasm.a C:/Qt/5.13.1/wasm_32/lib/libQt5EventDispatcherSupport.a C:/Qt/5.13.1/wasm_32/lib/libQt5FontDatabaseSupport.a C:/Qt/5.13.1/wasm_32/lib/libqtfreetype.a C:/Qt/5.13.1/wasm_32/lib/libQt5EglSupport.a C:/Qt/5.13.1/wasm_32/plugins/imageformats/libqgif.a C:/Qt/5.13.1/wasm_32/plugins/imageformats/libqicns.a C:/Qt/5.13.1/wasm_32/plugins/imageformats/libqico.a C:/Qt/5.13.1/wasm_32/plugins/imageformats/libqjpeg.a C:/Qt/5.13.1/wasm_32/plugins/imageformats/libqtga.a C:/Qt/5.13.1/wasm_32/plugins/imageformats/libqtiff.a C:/Qt/5.13.1/wasm_32/plugins/imageformats/libqwbmp.a C:/Qt/5.13.1/wasm_32/plugins/imageformats/libqwebp.a C:/Qt/5.13.1/wasm_32/lib/libQt5PrintSupport.a C:/Qt/5.13.1/wasm_32/lib/libQt5Widgets.a C:/Qt/5.13.1/wasm_32/lib/libQt5Gui.a C:/Qt/5.13.1/wasm_32/lib/libqtlibpng.a C:/Qt/5.13.1/wasm_32/lib/libqtharfbuzz.a C:/Qt/5.13.1/wasm_32/lib/libQt5Core.a C:/Qt/5.13.1/wasm_32/lib/libqtpcre2.a C:\Users\Osman\.emscripten_cache\wasm-obj\libc.a C:\Users\Osman\.emscripten_cache\wasm-obj\libcompiler_rt.a C:\Users\Osman\.emscripten_cache\wasm-obj\libc-wasm.a C:\Users\Osman\.emscripten_cache\wasm-obj\libc++-noexcept.a C:\Users\Osman\.emscripten_cache\wasm-obj\libc++abi-noexcept.a --whole-archive C:\Users\Osman\.emscripten_cache\wasm-obj\libembind-rtti.a --no-whole-archive C:\Users\Osman\.emscripten_cache\wasm-obj\libgl-webgl2.a C:\Users\Osman\.emscripten_cache\wasm-obj\libdlmalloc.a C:\Users\Osman\.emscripten_cache\wasm-obj\libpthread_stub.a C:\Users\Osman\.emscripten_cache\wasm-obj\libc_rt_wasm.a --import-memory --import-table -mllvm -combiner-global-alias-analysis=false -mllvm -enable-emscripten-sjlj -mllvm -disable-lsr --export __wasm_call_ctors --export __data_end --export main --export malloc --export free --export setThrew --export __errno_location --export fflush --export _ZSt18uncaught_exceptionv --export __cxa_find_matching_catch --export __cxa_is_pointer_type --export __cxa_can_catch --export emscripten_GetProcAddress --export emscripten_webgl_make_context_current --export emscripten_webgl_get_current_context --export strstr --export emscripten_builtin_memalign --export memalign --export emscripten_builtin_free --export _get_environ --export realloc --export _get_tzname --export _get_daylight --export _get_timezone --export strlen -z stack-size=5242880 --initial-memory=16777216 --no-entry --global-base=1024' failed (1)

If I pass -device-option WASM_OBJECT_FILES=1 to Qt configure when building Qt, will that fix this?

I checked notepad.obj and notepad.js_plugin_import.obj with wasm-dis.exe before and found that they were Wasm object files. But now when I check again, main.obj does have Wasm code in it but this is what I get for notepad.obj:

[parse exception: surprising value (at 0:4)]
Fatal: error in parsing wasm binary

All three of the ones from my code give the same error. How can I find those three object files from the Qt library so I can check them too?

[DragonOsman]

I finally managed to build the Notepad example app to Wasm, but I don't know how to run it. I tried opening notepad.html, but that brought me to a page with the Qt logo that says:

Qt for WebAssembly: notepad 
TypeError: Body has already been read

So what should I do?

Thanks in advance for any help.

[lorn.potter]

You can either put the resulting .js, .wasm, .html files on a web server, or emscripten comes with emrun which will start a server and open the html file in a browser.

[DragonOsman]

Thanks, I'll try that.

[DragonOsman]

I launched Python's web server by running python -m http.server, but I get the same exact HTML page as before when I go to notepad.html. It still has that same error on it.

[DragonOsman]

I get the exact same result with emrun. The error "TypeError: Body has already been read". How do I fix this? Someone please help. This seems like a JavaScript error so maybe I should also consult the Emscripten developers. But it's also something related to Qt and there may be something I need to know about how to run a Wasm module compiled from Qt code.

[lorn.potter]

@DragonOsman said in Building Qt Apps to Wasm:

The error "TypeError: Body has already been read". How do I fix this?

I have seen that when I configure qt for threads and have forgotten to enable shared memory in the browsers.

Chrome: chrome://flags "WebAssembly threads support"
FireFox: about:config "javascript.options.shared_memory"

[DragonOsman]

Okay, thanks. I'll have to see how to do that for MS Edge. Thanks for the info on Chrome.