I'm back with a GPU.. Qt Creator still not working
-
@Mlibu not sure if qt creator is working well with Vulkan. I have not tried it.
If your qt creator works, neither Designer nor Qt Design Studio is mandatory for your GUI design while they should work. Actually, I do not use both of them now although I have used Qt for some years.run the following command to check if something is missing(especially plugins)
strace qtcreator@JoeCFD Yes I have done a lot of QML manually but this time I want to have a lot more visual asthetic in my interface so I was really hoping to use creator to tie the signals to the ui etc. I will try the strace.
I have not heard good things about Qt Design Studio but I guess I will use it in the end if it gives me a visual and it works. Don't know how easy it is to work with C++ behind it though.
-
@JoeCFD Yes I have done a lot of QML manually but this time I want to have a lot more visual asthetic in my interface so I was really hoping to use creator to tie the signals to the ui etc. I will try the strace.
I have not heard good things about Qt Design Studio but I guess I will use it in the end if it gives me a visual and it works. Don't know how easy it is to work with C++ behind it though.
-
@Mlibu any good reasons for using Manjaro? I doubt Qt folks test Qt in all Linux distributions.
@JoeCFD
I already asked OP about this, requesting he try something we know lots of us use like Ubuntu. If you scroll back to about https://forum.qt.io/topic/155232/i-m-back-with-a-gpu-qt-creator-still-not-working/59 he repliedI have already tried Manjaro/KDE and Ubuntu/Gnome. Both with the package managers and with the unified installer.
If he is having his problem on Ubuntu/GNOME I don't know why his situation is apparently different from others.
-
J JonB referenced this topic on
-
@JoeCFD
I already asked OP about this, requesting he try something we know lots of us use like Ubuntu. If you scroll back to about https://forum.qt.io/topic/155232/i-m-back-with-a-gpu-qt-creator-still-not-working/59 he repliedI have already tried Manjaro/KDE and Ubuntu/Gnome. Both with the package managers and with the unified installer.
If he is having his problem on Ubuntu/GNOME I don't know why his situation is apparently different from others.
@JonB In the end I will use Ubuntu if that is the only thing that works. I'm not a big fan of Gnome and prefer KDE and Arch rolling release that's all. But like person before me said, I tried Ubuntu 23.10 and it did the same thing for me. Some people have suggested that I try Ubuntu 20.02 but I haven't had a chance yet.
-
@JonB In the end I will use Ubuntu if that is the only thing that works. I'm not a big fan of Gnome and prefer KDE and Arch rolling release that's all. But like person before me said, I tried Ubuntu 23.10 and it did the same thing for me. Some people have suggested that I try Ubuntu 20.02 but I haven't had a chance yet.
@Mlibu is your project compiling with qt6?
-
@Mlibu is your project compiling with qt6?
@Ronel_qtmaster Yes I can compile it with 6.6.0. Also the red square that I can't see on the screen appears in the window when it executes.
-
@Ronel_qtmaster Yes I can compile it with 6.6.0. Also the red square that I can't see on the screen appears in the window when it executes.
@Mlibu okay what is missing now?I mean which tool or feature
-
@Ronel_qtmaster Yes I can compile it with 6.6.0. Also the red square that I can't see on the screen appears in the window when it executes.
@Mlibu maybe you will have to try with ubuntu instead.
check this https://doc.qt.io/qt-6/supported-platforms.html
-
Ok so none of the packages on any other OS are even guaranteed to be working? Wow.
I'll try it on Windows 10 again then. I googled many times on "requirements for Qt creator". I guess I should have searched on "requirements for qt6".
I didn't want to do it on my mac because that requires all kinds of xcode library stuff and then it always breaks every time you have to upgrade xcode.
-
Ok so none of the packages on any other OS are even guaranteed to be working? Wow.
I'll try it on Windows 10 again then. I googled many times on "requirements for Qt creator". I guess I should have searched on "requirements for qt6".
I didn't want to do it on my mac because that requires all kinds of xcode library stuff and then it always breaks every time you have to upgrade xcode.
@Mlibu yes exactly.okay if you try on windows 10 and face issues let me know.I also did my installation on windows 10
-
@Mlibu yes exactly.okay if you try on windows 10 and face issues let me know.I also did my installation on windows 10
@Ronel_qtmaster Thanks, this is very helpful. Though I am not enthusiastic about any of those OSes. Maybe I will just make a small partition for it. Reboot is quick now with SSDs anyway. I did try on windows 10 but it may have been pre-1809. I didn't think this would depend on a certain version of windows.
-
@Ronel_qtmaster Thanks, this is very helpful. Though I am not enthusiastic about any of those OSes. Maybe I will just make a small partition for it. Reboot is quick now with SSDs anyway. I did try on windows 10 but it may have been pre-1809. I didn't think this would depend on a certain version of windows.
@Mlibu yes you can make a partition just for windows.Anyway just try let's see
-
@JonB In the end I will use Ubuntu if that is the only thing that works. I'm not a big fan of Gnome and prefer KDE and Arch rolling release that's all. But like person before me said, I tried Ubuntu 23.10 and it did the same thing for me. Some people have suggested that I try Ubuntu 20.02 but I haven't had a chance yet.
-
@Mlibu yes you can make a partition just for windows.Anyway just try let's see
@Ronel_qtmaster So I went to my windows 10 disk and updated it fully. I am now at version 22H2.
I downloaded the unified installer, selected the Windows Development Environment box and installed it. When I create a project I cannot go to the design page until I install the Qt Quick designer plugin. When I do install the plugin and go to the design page I drag a rectangle onto the page and select red background and it crashes seconds later.
-
@Mlibu I am using Qt 5.15.3/6.6.2 on Ubuntu 22.04 daily at work. I have Ubuntu 23.04 at home. No issues.
-
@Ronel_qtmaster So I went to my windows 10 disk and updated it fully. I am now at version 22H2.
I downloaded the unified installer, selected the Windows Development Environment box and installed it. When I create a project I cannot go to the design page until I install the Qt Quick designer plugin. When I do install the plugin and go to the design page I drag a rectangle onto the page and select red background and it crashes seconds later.
@Mlibu okay.Here in my version 6.6 when i go to the design tab, they tell me that no qt Design studio found.So it seems to use qt design studio for designing qml files.
Then i go to help, plugins and enable qmldesigner by clicking on the checkbox and after on ok.Don't click on install anywaythey will ask you to restart qt do it
-
@Mlibu I am using Qt 5.15.3/6.6.2 on Ubuntu 22.04 daily at work. I have Ubuntu 23.04 at home. No issues.
@JoeCFD as far as I can tell, this is how to install qtcreator with qt5 on ubuntu 22.04:
sudo apt install -y qtcreator qtbase5-dev qt5-qmake cmakeBut I get the following errors:
Reading package lists... Done Building dependency tree... Done Reading state information... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help resolve the situation: The following packages have unmet dependencies: lib32gcc-s1 : Depends: gcc-12-base (= 12-20220319-1ubuntu1) but 12.3.0-1ubuntu1~22.04 is to be installed lib32stdc++6 : Depends: gcc-12-base (= 12-20220319-1ubuntu1) but 12.3.0-1ubuntu1~22.04 is to be installed libc6-dev : Depends: libc6 (= 2.35-0ubuntu3) but 2.35-0ubuntu3.6 is to be installed Depends: libtirpc-dev but it is not going to be installed Depends: libnsl-dev but it is not going to be installed libc6-i386 : Depends: libc6 (= 2.35-0ubuntu3) but 2.35-0ubuntu3.6 is to be installed libgcc-11-dev : Depends: gcc-11-base (= 11.2.0-19ubuntu1) but 11.4.0-1ubuntu1~22.04 is to be installed Depends: libitm1 (>= 11.2.0-19ubuntu1) but it is not going to be installed Depends: libasan6 (>= 11.2.0-19ubuntu1) but it is not going to be installed Depends: liblsan0 (>= 11.2.0-19ubuntu1) but it is not going to be installed Depends: libtsan0 (>= 11.2.0-19ubuntu1) but it is not going to be installed Depends: libubsan1 (>= 11.2.0-19ubuntu1) but it is not going to be installed Depends: libquadmath0 (>= 11.2.0-19ubuntu1) but it is not going to be installed libobjc-11-dev : Depends: gcc-11-base (= 11.2.0-19ubuntu1) but 11.4.0-1ubuntu1~22.04 is to be installed Depends: libobjc4 (>= 11.2.0-19ubuntu1) but it is not going to be installed libstdc++-11-dev : Depends: gcc-11-base (= 11.2.0-19ubuntu1) but 11.4.0-1ubuntu1~22.04 is to be installed libx11-dev : Depends: libx11-6 (= 2:1.7.5-1) but 2:1.7.5-1ubuntu0.3 is to be installed E: Unable to correct problems, you have held broken packages. -
@Mlibu okay.Here in my version 6.6 when i go to the design tab, they tell me that no qt Design studio found.So it seems to use qt design studio for designing qml files.
Then i go to help, plugins and enable qmldesigner by clicking on the checkbox and after on ok.Don't click on install anywaythey will ask you to restart qt do it
@Ronel_qtmaster That sounds familiar, but I installed Design Studio with my windows install and it still has a problem.
-
@Mlibu okay.Here in my version 6.6 when i go to the design tab, they tell me that no qt Design studio found.So it seems to use qt design studio for designing qml files.
Then i go to help, plugins and enable qmldesigner by clicking on the checkbox and after on ok.Don't click on install anywaythey will ask you to restart qt do it
@Ronel_qtmaster But I think you need the plugin for it to interface with design studio. And anyway I was told that it is different than design studio. Regardless, on updated windows 10 I can only get to the page if I install the plugin and it still doesn't work.
-
@JoeCFD as far as I can tell, this is how to install qtcreator with qt5 on ubuntu 22.04:
sudo apt install -y qtcreator qtbase5-dev qt5-qmake cmakeBut I get the following errors:
Reading package lists... Done Building dependency tree... Done Reading state information... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help resolve the situation: The following packages have unmet dependencies: lib32gcc-s1 : Depends: gcc-12-base (= 12-20220319-1ubuntu1) but 12.3.0-1ubuntu1~22.04 is to be installed lib32stdc++6 : Depends: gcc-12-base (= 12-20220319-1ubuntu1) but 12.3.0-1ubuntu1~22.04 is to be installed libc6-dev : Depends: libc6 (= 2.35-0ubuntu3) but 2.35-0ubuntu3.6 is to be installed Depends: libtirpc-dev but it is not going to be installed Depends: libnsl-dev but it is not going to be installed libc6-i386 : Depends: libc6 (= 2.35-0ubuntu3) but 2.35-0ubuntu3.6 is to be installed libgcc-11-dev : Depends: gcc-11-base (= 11.2.0-19ubuntu1) but 11.4.0-1ubuntu1~22.04 is to be installed Depends: libitm1 (>= 11.2.0-19ubuntu1) but it is not going to be installed Depends: libasan6 (>= 11.2.0-19ubuntu1) but it is not going to be installed Depends: liblsan0 (>= 11.2.0-19ubuntu1) but it is not going to be installed Depends: libtsan0 (>= 11.2.0-19ubuntu1) but it is not going to be installed Depends: libubsan1 (>= 11.2.0-19ubuntu1) but it is not going to be installed Depends: libquadmath0 (>= 11.2.0-19ubuntu1) but it is not going to be installed libobjc-11-dev : Depends: gcc-11-base (= 11.2.0-19ubuntu1) but 11.4.0-1ubuntu1~22.04 is to be installed Depends: libobjc4 (>= 11.2.0-19ubuntu1) but it is not going to be installed libstdc++-11-dev : Depends: gcc-11-base (= 11.2.0-19ubuntu1) but 11.4.0-1ubuntu1~22.04 is to be installed libx11-dev : Depends: libx11-6 (= 2:1.7.5-1) but 2:1.7.5-1ubuntu0.3 is to be installed E: Unable to correct problems, you have held broken packages.
