custom model isn't completely working

mzimmers

@J-Hilk said in custom model isn't completely working:

Are you sure thats emitted, when you change the data via cpp ?

Yes. In my routine that handles the response from the backend, I have another qDebug() that shows dataChanged() being emitted (and it is). Somehow, though, that signal isn't causing my setData() to be called.

JonB

@mzimmers said in custom model isn't completely working:

shows dataChanged() being emitted (and it is). Somehow, though, that signal isn't causing my setData() to be called.

Remember I cannot help if this is a QML/display delegate side. But just from the C++ model side, what do you mean by this? setData() should emit dataChanged() signal, but dataChanged()should not cause setData() to be called (unless you have wired something up).

J.Hilk

@mzimmers @JonB is correct,

setData is only called, "automatically" if you change something in by the delegate via the Qt::EditRole

mzimmers

@J-Hilk said in custom model isn't completely working:

@mzimmers @JonB is correct,

setData is only called, "automatically" if you change something in by the delegate via the Qt::EditRole

OK, so in my case, where should that happen? I don't want my app to change the Switch setting; I only want it to send a request to the back end to make the change. Then, when I get a (successful) response, I change the value here:

void EquipmentModel::processPostResponse()
{
    QUuid uuid; // code for setting this has been removed.
    int i;

    i = m_list->getIndex(uuid);
    EquipmentItem itemFromList = m_list->getEquipmentItem(uuid);

    if (itemFromList.powerState() == Equipment::POWER_OFF) {
        itemFromList.setPowerState(Equipment::POWER_ON);
    } else {
        itemFromList.setPowerState(Equipment::POWER_OFF);
    }
    if (m_list->setItemAt(i, itemFromList)) {
        QModelIndex qmi = index(i, 0, QModelIndex());
        qDebug() << __PRETTY_FUNCTION__ << "emitting dataChanged(); qmi is" << qmi;
        emit dataChanged(qmi, qmi);
    }
}

JonB

@mzimmers
In itself this seems OK to me. So what's with you complaining about setData() not getting called? Does your override of setData() do much the same as your setItemAt() code here? It doesn't do something else "special" you are relying on?

mzimmers

@JonB based on what you said above, I replaced the line:

emit dataChanged(qmi, qmi);

with:

setData(qmi, itemFromList.powerState(), StateRole);

and now setData is indeed being called. Here's my setData() function:

bool EquipmentModel::setData(const QModelIndex &index, const QVariant &value, int role)
{
    bool rc = false;

    qDebug() << __PRETTY_FUNCTION__ << "role is" << role;
    do {
        if (m_list == nullptr) {
            continue;
        }
        EquipmentItem item = m_list->equipment().at(index.row());
        switch (role) {
        case UuidRole:
            item.setUuid(value.toUuid());
            break;
        case NameRole:
            item.setName(value.toString());
            break;
        case FwVersionRole:
            item.setFwVersion(value.toString());
            break;
        case ModelIdRole:
            item.setModelId(value.toString());
            break;
        case StateRole:
            item.setPowerState(Equipment::PowerState(value.toInt()));
            qDebug() << __PRETTY_FUNCTION__ << "power state set to" << value.toInt();
            break;
        }

        if (m_list->setItemAt(index.row(), item)) {
            qDebug() <<  __PRETTY_FUNCTION__ << "setItemAt() returned successfully; role is" << role;
            emit dataChanged(index, index, QVector<int>() << role);
            rc = true;
        } else {
            qWarning() << __PRETTY_FUNCTION__ << "error from setItemAt.";
        }
    } while (false);
    return rc;
}

The qDebug statements suggest that dataChanged is being emitted, so I guess I'm missing something downstream from this.

JonB

@mzimmers
This looks OK.

Except that you call m_list->setItemAt(index.row(), item) unconditionally without looking at passed in role.

Now I know QML uses special roles, and I have no idea whether it would do this, but if your setData() is called with, say, role == Qt::ForegroundRole you set the item in the list of values nonetheless. Usually you would test for the EditRole role. From QML you may need to include your explicit UuidRole etc. as well, I don't know. If QML never calls setData() with the various roles listed in https://doc.qt.io/qt-6/qt.html#ItemDataRole-enum this may not matter.

mzimmers

@JonB my setData() is patterned after the example I mentioned in my first post. I see what you're saying (I think), and I should probably fix that, but it doesn't seem to be influencing the code execution (according to the telltales).

Nowhere in my qml am I calling setData(); remember, I don't want my app to change anything (like the power state); merely to send a request to the back end for that change, and properly handle the response.

Thanks...

JoeCFD

@mzimmers did you try to add
beginResetModel();
set list data.....
endResetModel();

mzimmers

@JoeCFD hmm...I think you're on to something.

I created a setList() function (also patterned after the example) that contains those calls:

void EquipmentModel::setList(EquipmentList *list)
{
    beginResetModel();
    if (m_list != nullptr) {
        m_list->disconnect(this);
    }

    m_list = list;

    if (m_list != nullptr) {
        connect(m_list, &EquipmentList::preItemAppended, this, [=]() {
            const int index = m_list->equipment().size();
            beginInsertRows(QModelIndex(), index, index);
        });
        connect(m_list, &EquipmentList::postItemAppended, this, [=]() {
            endInsertRows();
        });

        connect(m_list, &EquipmentList::preItemRemoved, this, [=](int index) {
            beginRemoveRows(QModelIndex(), index, index);
        });
        connect(m_list, &EquipmentList::postItemRemoved, this, [=]() {
            endRemoveRows();
        });
    }
    endResetModel();
}

But...I never call it. I can try to modify my setData() to use it, though it will be tricky, as my list is a QObject, so I can't copy it. What do you think?

EDIT:

I modified this portion of my setData() as follows; still not getting the changes in the displays:

beginResetModel();
if (m_list->setItemAt(index.row(), item)) {
    qDebug() <<  __PRETTY_FUNCTION__ << "setItemAt() returned successfully; role is" << role;
    emit dataChanged(index, index, QVector<int>() << role);
    rc = true;
} else {
    qWarning() << __PRETTY_FUNCTION__ << "error from setItemAt.";
}
endResetModel();

I could move the begin/endResetModel() calls to the setItemAt() function, but I think the results would be the same, right?

JoeCFD

@mzimmers
https://doc.qt.io/qt-6/qabstractitemmodel.html#beginResetModel
When a model is reset it means that any previous data reported from the model is now invalid and has to be queried for again. This also means that the current item and any selected items will become invalid.

When a model radically changes its data it can sometimes be easier to just call this function rather than emit dataChanged() to inform other components when the underlying data source, or its structure, has changed.

You must call this function before resetting any internal data structures in your model or proxy model.

mzimmers

@JoeCFD it's as though the QML property that reflects the state just isn't getting the message to update. I wonder if there's something wrong with how I'm setting that property:

Rectangle {
    id: fakeSwitch
    height: 30; width: 30
    property bool switchState: equipmentModel.getEquipmentItem(pumpUuid).powerState // does this look OK?
    color: switchState ? 'green' : 'gray'
    MouseArea {
        anchors.fill: parent
        onClicked: {
            fakeSwitch.switchState = !fakeSwitch.switchState
            equipmentModel.sendSwitchChange(pumpUuid, fakeSwitch.switchState)
        }
    }
}

JonB

@mzimmers said in custom model isn't completely working:

property bool switchState: equipmentModel.getEquipmentItem(pumpUuid).powerState // does this look OK?

One thing. Your C++ code shows this is not a bool property, you test/set powerState() against Equipment::POWER_OFF/POWER_ON. Do these values convert correctly to bool?

mzimmers

Another data point in this little mystery: I have 3 locations in my GUI that show the value of this model element. Two are in ordinary screens, and they're not updating correctly. The third is in a drawer, and it's always correct. The Switch code is virtually identical. Does the act of opening a drawer force an update to its contents? Is that why that one is always right?

mzimmers

@JonB I think it is. I started using that FakeSwitch because I couldn't tell whether the real Switch was self-updating, and giving me a red herring. Here's the code from the real Switch, and its behavior is essentially the same (nothing in the custom switch affects this issue):

Switch_custom {
    id: cardSwitch
    visible: card.switchable
    checked: equipmentModel.getEquipmentItem(uuid).powerState === 1
    Layout.alignment: Qt.AlignRight
    onClicked: {
        console.log("EquipmentCard.qml: switch clicked; value is " + cardSwitch.checked)
        equipmentModel.sendSwitchChange(card.uuid, cardSwitch.checked)
    }
}

JoeCFD

@mzimmers What is the role type of drawer? I guess there is a default role.

mzimmers

@JoeCFD I don't assign any role to anything in the drawer. I'm not sure how I'd even do that as it relates to the Switch it contains.

J.Hilk

@mzimmers said in custom model isn't completely working:

Does the act of opening a drawer force an update to its contents?

possibly that opening the drawer recreates the drawer content, forcing a reload of the data each time its opened

mzimmers

@J-Hilk well, in a sense, that's good news -- it would mean that my model isn't properly signaling changes at all, so at least the problem is consistent.

This is so weird -- it's almost as though the Switches on the different screens are independent of each other. Everything in the model seems to be working, from messaging the server, to accepting the response and (seemingly) sending the appropriate signals to QML.

I know this idea is a cheat, and I wouldn't want to use it in production, but...is there a way to force a QML component to update every time it becomes visible?

JoeCFD

@mzimmers

 onVisibleChanged: {
      console.log( " visible =", visible )
      //do update if visible is true 
 }