JSON read and write values

[JonB]

@another_one said in JSON read and write values:

I tried but I place new line

I don't know what this means. JSON does not have "new lines".

You asked to "change g_FILE_LOAD and store it back". @mzimmers code is correct for updating the FILE_LOAD item to a new value, and then as I wrote "you have to save the whole document back", i.e. overwrite the existing file with the new QJsonDocument.

[another_one]

@mzimmers

is it necessary to repeat json context as "constant" in QByteArray, can I use already readed from json file?

[JonB]

@another_one Yes, of course you can read from file, @mzimmers was just a standalone example.

[another_one]

@JonB
Now I completely didnt understand)

[JonB]

@another_one
I don't know what to say to that. Everything is really so straightforward.

1. Open the file for read, read in the JSON, close the file.
2. Make the change in memory to the FILE_LOAD value, as per @mzimmers code.
3. Open the file for write/overwrite, save the JSON, close the file.

[another_one]

@JonB
ok,
At first I have got the following values in json file:
"
{
"PORT": "COM3",
"RATE": "BAUD115200",
"PARITY": "PAR_NONE",
"STOPBIT": "STOP_2",
"BITS": "8",
"LD_ADDR": "FFFFFFF085000020",
"ST_ADDR": "FFFFFFF085000020",
"MEM_TYPE": "LWord",
"MEM_ADDR": "FFFFFFF085000000",
"FILE_LOAD": "C:/tmp",
}
"

And in code I do the followin:

1. open json file:

 QFile file_json(QString::fromStdString("monMK.json"));
    if (!file_json.open(QFile::WriteOnly | QFile::Text | QFile::Append)) {
        qDebug() << "json didnt opened";

   }
    else
    {
        qDebug() << "json oponed";
        QString strReply = (QString)file_json.readAll();
        QJsonDocument jsonResponse = QJsonDocument::fromJson(strReply.toUtf8());

2. Here I ment what my json file is already copied in memory (in jsonResponse), so I close the file:
   file_json.close();
3. Now I do edition:

 QJsonObject jsonObject = jsonResponse.object();
 jsonObject["FILE_LOAD"] = "C:/temp";
jsonResponse.setObject(jsonObject);

4. And now I store it back:

  file_json.open(QFile::WriteOnly | QFile::Text | QFile::ReadWrite);
  file_json.write(jsonResponse.toJson());

As a result I have got the following jnson file context:
"
{
"FILE_LOAD": "C:/temp"
}
15200",
"PARITY": "PAR_NONE",
"STOPBIT": "STOP_2",
"BITS": "8",
"LD_ADDR": "FFFFFFF085000020",
"ST_ADDR": "FFFFFFF085000020",
"MEM_TYPE": "LWord",
"MEM_ADDR": "FFFFFFF085000000",
"FILE_LOAD": "C:/tmp",
}
"

[JonB]

@another_one
This is getting crazy. You already had code which read in your JSON from file. Now you open a file for WriteOnly + Append initially, even though we said to open it for read, and then you try to read from it.

Further in the second stage you open a file for WriteOnly + ReadWrite when we said to overwrite.

[mzimmers]

@another_one your JSON logic now looks OK, but your file handling is wrong.

    QFile qf("./test.json");
    QByteArray qba;
    QJsonParseError qjpe;
    QJsonDocument qjd;

    qf.open(QFile::ReadOnly);
    qba = qf.readAll();
    qf.close();
    qjd = QJsonDocument::fromJson(qba, &qjpe);
    QJsonObject qjo = qjd.object();
    qjo["FILE_LOAD"] = "D:/tmp";
    qjd.setObject(qjo);

    qf.open(QFile::WriteOnly);
    qba = qjd.toJson();
    qf.write(qba);
    qf.close();

[SGaist]

In addition to what @mzimmers wrote, stop your C style casting. This is very wrong. QByteArray and QString are two very different beasts.

[another_one]

@SGaist Thank you!

almost everything worked
At the setup ui I write values to JSON file
But when I trying to write during filedialog launched by button clicking its not working

 QFile file_json2(QString::fromStdString("./monMK.json"));
            if (!file_json2.open(QFile::ReadOnly))
            {
                qDebug() << "json didnt opened";
            }
            else
            {
                qDebug() << "json oponed";
                QString strReply2 = (QString)file_json2.readAll();
                qDebug() << strReply2;

                file_json2.close();
                QJsonDocument jsonResponse2 = QJsonDocument::fromJson(strReply2.toUtf8());
                QJsonObject jsonObject2 = jsonResponse2.object();

                jsonObject2["FILE_LOAD"] = g_FILE_LOAD;
                jsonResponse2.setObject(jsonObject2);
                file_json2.open(QFile::WriteOnly);

                file_json2.write(jsonResponse2.toJson());
                qDebug() << "g_FILE_LOAD" << g_FILE_LOAD;
                file_json2.close();
                qDebug() << strReply2;

            }

As I understand its not possible cause of another processing
and I should do JSON file storing by slot function emitted from filedialog of button processing
But I don't undestand how to do an object which has to be as emitter of signal

Please help!

[JonB]

@another_one
None of the "file dialog" or "slot" or "signal" stuff you mention should be of any relevance. Your code looks like it should work OK. Why don't you say something descriptive rather than "its not working" if you're a programmer and you want help?

[another_one]

@JonB
Thank you for your replay!

I'm trying to strore the file path in JSON value "FILE_LOAD" in processing of selecting *.bin file in windows folder
To do what I click on "open_folder" button below:

void M_m::on_open_folder_clicked()
{

        QDir dir2;
        dir2.setCurrent(g_FILE_LOAD);
        QString nameFile2 = QFileDialog::getOpenFileName(this, tr("load bin"),"",        tr("*.bin"));
        if (nameFile2.isEmpty())	
        {
            return;
        }
        else
        {
            QFile file;
            file.setFileName(nameFile2);
            ui->lineEdit->setStyleSheet("color: green;  background-color: white");
            ui->lineEdit->setText(nameFile2);
            QFileInfo nameSt(file);
            QString name = nameSt.fileName();
            qDebug()<<"objectNAme="<<file.objectName();//.fileName();
            dir2 = nameSt.dir();//.absoluteDir();
            g_FILE_LOAD = nameFile2;
            qDebug() << QString::number((unsigned int)fls, 16);
            fs2->setValue(3);
        }
}

where fs2->setValue(3); launch Slot function in which I do the following:

  QFile file_json3(QString::fromStdString("monMK.json"));
            if (!file_json3.open(QFile::ReadOnly))
            {
                qDebug() << "json didnt opened";
            }
            else
            {
                qDebug() << "json value3 opened";
                QString strReply3 = (QString)file_json3.readAll();
                qDebug() << strReply3; // read JSON in debug
                QJsonDocument jsonResponse3 = QJsonDocument::fromJson(strReply3.toUtf8());
                QJsonObject jsonObject3 = jsonResponse3.object();
                file_json3.close();
                jsonObject3["FILE_LOAD"] =g_FILE_LOAD;
                jsonResponse3.setObject(jsonObject3);
                file_json3.open(QFile::WriteOnly);
                file_json3.write(jsonResponse3.toJson());
                qDebug() << "g_FILE_LOAD" << "C:/temp"; // g_FILE_LOAD;
                file_json3.close();
                qDebug() << strReply3;
                qDebug() << "store finished";

            }

And only in what case my writing to JSON file is not working
Also I do the almost the same - I store another value from another button clicking in which I use more simplier processing whithout file dialog and it is working
And I compared whese two cases and as result I got the following:
In more simplier case I read JSON in debug and that is correct:
"
json value 1 oponed
QJsonValue(string, "FFFFFFF085000020")
"{\n "BITS": "8",\n "FILE_COMP": "Undefined",\n "FILE_LOAD": "C:/temp",\n "FLOAD": "C:/temp",\n "LD_ADDR": "FFFFFFF085000020",\n "MEM_ADDR": "FFFFFFF085000000",\n "MEM_TYPE": "LWord",\n "PARITY": "PAR_NONE",\n "PORT": "COM3",\n "RATE": "115200",\n "STOPBIT": "STOP_2",\n "ST_ADDR": "FFFFFFF085000000"\n}\n"
"
In case with problem of storing I read JSON in debug and that is not correct:
"
json value3 oponed
"{\n "FILE_LOAD": "C:/tmp",\n "PORT": "PORT20"\n}\n"
g_FILE_LOAD C:/temp
"{\n "FILE_LOAD": "C:/tmp",\n "PORT": "PORT20"\n}\n"
"
And maybe because of what I can not do right writing

So please help to figure out

Thanks!

[JonB]

@another_one
I don't know. suggest you put qDebug() statements after each line as you change the JSON to see what's going on where. The fact that you use a dialog to get a pathname from the user cannot be relevant.

QString strReply3 = (QString)file_json3.readAll(); do not use this. Use a suitable QString method.

[jsulm]

@JonB said in JSON read and write values:

do not use this. Use a suitable QString method.

@another_one @SGaist wrote that several times already, don't know why you're not lisening...

[another_one]

@JonB said in JSON read and write values:

Use a suitable QString method.

Sorry I didint undestand, what is why I still do not use what
Could you bring some example?, please

[jsulm]

@another_one You can't use C-style cast to cat a QByteArray to QString.
Use one of the from* methods like https://doc.qt.io/qt-6/qstring.html#fromLatin1-2 depending on the used encoding.

[another_one]

@jsulm
Now I undestand, sorry, I need to do readall in QbyteArray as mzimmers already recomended
Thanks to all!

[another_one]

@another_one

I did recomended changes but unfortunally it doesn help!

            QFile file_json3(QString::fromStdString("monMK.json"));
            if (!file_json3.open(QFile::ReadOnly))
            {
                qDebug() << "json didnt opened";
            }
            else
            {
                QByteArray qba3;
                QJsonParseError qjpe3;
                qba3 = file_json3.readAll();
                file_json3.close();
                QJsonDocument jsonResponse3 = QJsonDocument::fromJson(qba3, &qjpe3);
                QJsonObject jsonObject3 = jsonResponse3.object();
                jsonObject3["FILE_LOAD"] =  g_FILE_LOAD;
                jsonResponse3.setObject(jsonObject3);
                file_json3.open(QFile::WriteOnly);
                qba3 = jsonResponse3.toJson();
                file_json3.write(qba3);
                file_json3.close();
                qDebug() << qba3;
                qDebug() << "store finished";

            }

[SGaist]

@another_one said in JSON read and write values:

@another_one

            QJsonParseError qjpe3;
            qba3 = file_json3.readAll();
            file_json3.close();
            QJsonDocument jsonResponse3 = QJsonDocument::fromJson(qba3, &qjpe3);

What about checking what qjpe3 contains ?

[Christian Ehrlicher]

@SGaist said in JSON read and write values:

Why about checking what qjpe3 contains ?

And on the next line don't ignore qjpe3. Doing basically no error checking and the onwdering why it does not work...