qt.qpa.plugin: Could not load the Qt platform plugin "xcb" in "" even though it was found.

JonB

@UltraBlack_
Please search again for your error message, which is qt.qpa.xcb: could not connect to display. There are plenty of posts about that on this forum and elsewhere. As I wrote earlier that means:

Not an xcb library loading problem, rather however your X display is set up/connecting.

Since you say it runs under sudo, I can only imagine either your permissions or your X environment is set up to allow that but not for your non-sudo user.

As always, try to run an xterm. If you cannot run that you know you do not have a Qt problem.

Dariusz

Same problem here.
When I run app freshly build everything works.
But when I want to > process.setArguments(["--set-rpath", "./", releaseFile]) Then everything breaks. Error :

Warning: Ignoring WAYLAND_DISPLAY on Gnome. Use QT_QPA_PLATFORM=wayland to run on Wayland anyway.
qt.qpa.plugin: Could not find the Qt platform plugin "xcb" in ""
qt.qpa.plugin: Could not find the Qt platform plugin "wayland" in ""
This application failed to start because no Qt platform plugin could be initialized. Reinstalling the application may fix this problem.

Its driving me nuts. Adding rpath relative to current binary/folder breaks everything ;/

jsulm

@Dariusz said in qt.qpa.plugin: Could not load the Qt platform plugin "xcb" in "" even though it was found.:

Adding rpath relative to current binary/folder

It is relative to current working directory - are you sure it is the correct one?

Dariusz

@jsulm said in qt.qpa.plugin: Could not load the Qt platform plugin "xcb" in "" even though it was found.:

@Dariusz said in qt.qpa.plugin: Could not load the Qt platform plugin "xcb" in "" even though it was found.:

Adding rpath relative to current binary/folder

It is relative to current working directory - are you sure it is the correct one?

Relative to the current working directory... but if I move exe to a different directory, then will the path be relative to that new directory or old one?
Its all in root of app, I even tried to copy plugins content out of plugins folder and in to root too. Nothing seems to be working.

jsulm

@Dariusz said in qt.qpa.plugin: Could not load the Qt platform plugin "xcb" in "" even though it was found.:

but if I move exe to a different directory, then will the path be relative to that new directory or old one?

Well, yes it should be the working directory of the process you start, so the one where the exe is located.

Dariusz

@jsulm Yep, then should be relative. Looking at argument I pass process.setArguments(["--set-rpath", "./", releaseFile]) I set rpath to be ./ which is I take relative to exe dir.
He still fails to properly solve the xbc/wayland stuff. Do I need to dig in to xcb library themself, and remap them too to point to correct qt folders or something? I'll ldd them see what they look for where.
Maybe they need configuring too to be relative to xx project.

HlaElks

Hi, the displayed message may indicate these two paths(

/home/lis/.local/lib/python3.9/site-packages/cv2/qt/plugins/platforms/libqxcb.so
/home/lis/.local/lib/python3.9/site-packages/PyQt5/Qt5/plugins/platforms/libqxcb.so

) are mixed. How should I fix this? . Thanks!

QFactoryLoader::QFactoryLoader() looking at "/home/lis/.local/lib/python3.9/site-packages/PyQt5/Qt5/plugins/platforms/libqxcb.so"
Found metadata in lib /home/lis/.local/lib/python3.9/site-packages/PyQt5/Qt5/plugins/platforms/libqxcb.so, metadata=
{
    "IID": "org.qt-project.Qt.QPA.QPlatformIntegrationFactoryInterface.5.3",
    "MetaData": {
        "Keys": [
            "xcb"
        ]
    },
    "archreq": 0,
    "className": "QXcbIntegrationPlugin",
    "debug": false,
    "version": 331520
}
Got keys from plugin meta data ("xcb")
QFactoryLoader::QFactoryLoader() checking directory path "/usr/bin/platforms" ...
loaded library "/home/lis/.local/lib/python3.9/site-packages/cv2/qt/plugins/platforms/libqxcb.so"

qt.qpa.plugin: Could not load the Qt platform plugin "xcb" in "/home/lis/.local/lib/python3.9/site-packages/cv2/qt/plugins" even though it was found.

JonB

@HlaElks
I don't know which of the cv2 versus the PyQt5 ones you want/need to load. But if you want to find out why /home/lis/.local/lib/python3.9/site-packages/cv2/qt/plugins/platforms/libqxcb.so failed to load you might run ldd on it and examine the output for a missing dependency. Whether that is what you need to know I don't know.

actionmystique

Hi there. I've encountered the same type of issue when running Seagate's:

./run_SeaTools.sh
qt.qpa.plugin: Could not load the Qt platform plugin "xcb" in "/usr/lib/x86_64-linux-gnu/qt5/plugins:/usr/lib/x86_64-linux-gnu/qt5/plugins/platforms" even though it was found.

I could not read all the posts in this thread, but I tried some of the proposed solutions which did not solve anything in my case:

# apt install --reinstall libqt5gui5 qtbase5-dev qt5dxcb-plugin libxcb-xinerama0
...
# export QT_DEBUG_PLUGINS=1
# export QT_QPA_PLATFORM_PLUGIN_PATH=/usr/lib/x86_64-linux-gnu/qt5/plugins/platforms
# ./run_SeaTools.sh 
qt.qpa.plugin: Could not load the Qt platform plugin "xcb" in "/usr/lib/x86_64-linux-gnu/qt5/plugins:/usr/lib/x86_64-linux-gnu/qt5/plugins/platforms" even though it was found.
This application failed to start because no Qt platform plugin could be initialized.
...

Any suggestion?

JonB

@actionmystique
As has been said many times, the first thing to try is running with environment variable QT_DEBUG_PLUGINS=1.
When you have located the xcb .so file, you might also run ldd on it to see if that tells you anything is missing.

SGaist

Hi

@actionmystique why are you trying to run a GUI application as root ?

How did you become root in the first place ?

actionmystique

@SGaist

why are you trying to run a GUI application as root ?

root is required to run /usr/bin/env which is used in the script. I do no see any reason why being root may be the root ;-) cause for this issue.

How did you become root in the first place ?

Does it really matter?

JonB

@actionmystique said in qt.qpa.plugin: Could not load the Qt platform plugin "xcb" in "" even though it was found.:

root is required to run /usr/bin/env

I do not know what platform/variant of Linux you are on, but since when has running /usr/bin/env ever required root permission/user to run??

I do no see any reason why being root may be the root ;-) cause for this issue.

Xorg does not like a root user to run UI applications if you are logged into it as a non-root user. (I don't know whether xhost +... would permit this.) I imagine that is why @SGaist is asking.

actionmystique

@JonB

I do not know what platform/variant of Linux you are on, but since when has running /usr/bin/env ever required root permission/user to run??

I did not phrase it correctly; pkexec needs root to run env ; the script contains:

pkexec env DISPLAY="$DISPLAY" XAUTHORITY="$XAUTHORITY" "$seadoctorDir"/exec-seatools-in-dir

JonB

@actionmystique
If you are running as root but not logged on as root I still wonder if that is the issue.

Xorg

By default, and for security reasons, root will be unable to connect to a non-root user's X server. There are multiple ways of allowing root to do so however, if necessary.

https://wiki.archlinux.org/title/Running_GUI_applications_as_root

Maybe this is an issue, maybe it is not.

actionmystique

@JonB
I tried:

login as root: same result
add one policy kit file for env and for SeaTools: same result
org.freedesktop.policykit.pkexec.policy

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE policyconfig PUBLIC
 "-//freedesktop//DTD PolicyKit Policy Configuration 1.0//EN"
 "http://www.freedesktop.org/standards/PolicyKit/1/policyconfig.dtd">
<policyconfig>
  <action id="org.freedesktop.policykit.pkexec.run-env">
    <description>Run env</description>
    <message>Authentication is required to run env</message>
    <defaults>
      <allow_any>no</allow_any>
      <allow_inactive>no</allow_inactive>
      <allow_active>auth_admin_keep</allow_active>
    </defaults>
    <annotate key="org.freedesktop.policykit.exec.path">/usr/bin/env</annotate>
    <annotate key="org.freedesktop.policykit.exec.allow_gui">TRUE</annotate>
  </action>
  <action id="org.freedesktop.policykit.pkexec.run-SeaTools">
    <description>Run SeaTools</description>
    <message>Authentication is required to run SeaTools</message>
    <defaults>
      <allow_any>no</allow_any>
      <allow_inactive>no</allow_inactive>
      <allow_active>auth_admin_keep</allow_active>
    </defaults>
    <annotate key="org.freedesktop.policykit.exec.path">/opt/SeaTools5/SeaTools</annotate>
    <annotate key="org.freedesktop.policykit.exec.allow_gui">TRUE</annotate>
  </action>
</policyconfig>

However, I did notice one file which may or may not be adequate: qt.conf

# Generated by linuxdeployqt
# https://github.com/probonopd/linuxdeployqt/
[Paths]
Prefix = ./
Plugins = plugins
Imports = qml
Qml2Imports = qml

actionmystique

Has anyone tried to run SeaTools from seagate on Ubuntu?

mywings19

hi,
I'm facing similar issue.could you give me some suggestion?
my QT version is:Qt Creator 8.0.1 based on Qt 6.3.1

the error message:
qt.qpa.plugin: Could not load the Qt platform plugin "xcb" in "/home/sugon/Software/qtcreator8.0.1/lib/Qt/plugins/platforms" even though it was found.
This application failed to start because no Qt platform plugin could be initialized. Reinstalling the application may fix this problem.
Available platform plugins are: linuxfb, minimal, offscreen, vnc, eglfs, minimalegl, vkkhrdisplay, wayland-egl, wayland, xcb.

Then I've set 'export QT_DEBUG_PLUGINS=1'
but there's no extra error message,qtcreator is running normally

And I've run 'ldd libqxcb.so',result is

        linux-vdso.so.1 (0x00007ffcdb970000)
        libQt6XcbQpa.so.6 => /home/sugon/Software/qtcreator8.0.1/lib/Qt/plugins/platforms/./../../lib/libQt6XcbQpa.so.6 (0x00007f02bc4a5000)
        libxkbcommon-x11.so.0 => /lib/x86_64-linux-gnu/libxkbcommon-x11.so.0 (0x00007f02bc476000)
        libxkbcommon.so.0 => /lib/x86_64-linux-gnu/libxkbcommon.so.0 (0x00007f02bc434000)
        libxcb-icccm.so.4 => /lib/x86_64-linux-gnu/libxcb-icccm.so.4 (0x00007f02bc42d000)
        libxcb-image.so.0 => /lib/x86_64-linux-gnu/libxcb-image.so.0 (0x00007f02bc427000)
        libxcb-keysyms.so.1 => /lib/x86_64-linux-gnu/libxcb-keysyms.so.1 (0x00007f02bc422000)
        libxcb-randr.so.0 => /lib/x86_64-linux-gnu/libxcb-randr.so.0 (0x00007f02bc40e000)
        libxcb-render-util.so.0 => /lib/x86_64-linux-gnu/libxcb-render-util.so.0 (0x00007f02bc407000)
        libxcb-shm.so.0 => /lib/x86_64-linux-gnu/libxcb-shm.so.0 (0x00007f02bc402000)
        libxcb-sync.so.1 => /lib/x86_64-linux-gnu/libxcb-sync.so.1 (0x00007f02bc3f8000)
        libxcb-xfixes.so.0 => /lib/x86_64-linux-gnu/libxcb-xfixes.so.0 (0x00007f02bc3ee000)
        libxcb-render.so.0 => /lib/x86_64-linux-gnu/libxcb-render.so.0 (0x00007f02bc3df000)
        libxcb-shape.so.0 => /lib/x86_64-linux-gnu/libxcb-shape.so.0 (0x00007f02bc3d8000)
        libxcb-xkb.so.1 => /lib/x86_64-linux-gnu/libxcb-xkb.so.1 (0x00007f02bc3ba000)
        libxcb.so.1 => /lib/x86_64-linux-gnu/libxcb.so.1 (0x00007f02bc390000)
        libQt6OpenGL.so.6 => /home/sugon/Software/qtcreator8.0.1/lib/Qt/plugins/platforms/./../../lib/libQt6OpenGL.so.6 (0x00007f02bc2ee000)
        libQt6Gui.so.6 => /home/sugon/Software/qtcreator8.0.1/lib/Qt/plugins/platforms/./../../lib/libQt6Gui.so.6 (0x00007f02bb96b000)
        libGL.so.1 => /lib/x86_64-linux-gnu/libGL.so.1 (0x00007f02bb8d7000)
        libQt6Core.so.6 => /home/sugon/Software/qtcreator8.0.1/lib/Qt/plugins/platforms/./../../lib/libQt6Core.so.6 (0x00007f02bb272000)
        libX11-xcb.so.1 => /lib/x86_64-linux-gnu/libX11-xcb.so.1 (0x00007f02bb26d000)
        libX11.so.6 => /lib/x86_64-linux-gnu/libX11.so.6 (0x00007f02bb12c000)
        libdl.so.2 => /lib/x86_64-linux-gnu/libdl.so.2 (0x00007f02bb127000)
        libpthread.so.0 => /lib/x86_64-linux-gnu/libpthread.so.0 (0x00007f02bb106000)
        libstdc++.so.6 => /lib/x86_64-linux-gnu/libstdc++.so.6 (0x00007f02baf82000)
        libm.so.6 => /lib/x86_64-linux-gnu/libm.so.6 (0x00007f02badfd000)
        libgcc_s.so.1 => /lib/x86_64-linux-gnu/libgcc_s.so.1 (0x00007f02bade3000)
        libc.so.6 => /lib/x86_64-linux-gnu/libc.so.6 (0x00007f02bac22000)
        libglib-2.0.so.0 => /lib/x86_64-linux-gnu/libglib-2.0.so.0 (0x00007f02bab03000)
        libgthread-2.0.so.0 => /lib/x86_64-linux-gnu/libgthread-2.0.so.0 (0x00007f02baafe000)
        libxcb-util.so.0 => /lib/x86_64-linux-gnu/libxcb-util.so.0 (0x00007f02baaf2000)
        libXau.so.6 => /lib/x86_64-linux-gnu/libXau.so.6 (0x00007f02baaed000)
        libXdmcp.so.6 => /lib/x86_64-linux-gnu/libXdmcp.so.6 (0x00007f02baae5000)
        libEGL.so.1 => /lib/x86_64-linux-gnu/libEGL.so.1 (0x00007f02baad0000)
        libfontconfig.so.1 => /lib/x86_64-linux-gnu/libfontconfig.so.1 (0x00007f02baa8a000)
        libQt6DBus.so.6 => /home/sugon/Software/qtcreator8.0.1/lib/Qt/plugins/platforms/./../../lib/libQt6DBus.so.6 (0x00007f02ba9b8000)
        libz.so.1 => /lib/x86_64-linux-gnu/libz.so.1 (0x00007f02ba99b000)
        libfreetype.so.6 => /lib/x86_64-linux-gnu/libfreetype.so.6 (0x00007f02ba8df000)
        libGLX.so.0 => /lib/x86_64-linux-gnu/libGLX.so.0 (0x00007f02ba8ab000)
        libGLdispatch.so.0 => /lib/x86_64-linux-gnu/libGLdispatch.so.0 (0x00007f02ba7ee000)
        libicui18n.so.56 => /home/sugon/Software/qtcreator8.0.1/lib/Qt/plugins/platforms/./../../lib/libicui18n.so.56 (0x00007f02ba353000)
        libicuuc.so.56 => /home/sugon/Software/qtcreator8.0.1/lib/Qt/plugins/platforms/./../../lib/libicuuc.so.56 (0x00007f02b9f9b000)
        libicudata.so.56 => /home/sugon/Software/qtcreator8.0.1/lib/Qt/plugins/platforms/./../../lib/libicudata.so.56 (0x00007f02b85b8000)
        librt.so.1 => /lib/x86_64-linux-gnu/librt.so.1 (0x00007f02b85ae000)
        /lib64/ld-linux-x86-64.so.2 (0x00007f02bc55d000)
        libpcre.so.3 => /lib/x86_64-linux-gnu/libpcre.so.3 (0x00007f02b853a000)
        libbsd.so.0 => /lib/x86_64-linux-gnu/libbsd.so.0 (0x00007f02b8520000)
        libexpat.so.1 => /lib/x86_64-linux-gnu/libexpat.so.1 (0x00007f02b84e1000)
        libuuid.so.1 => /lib/x86_64-linux-gnu/libuuid.so.1 (0x00007f02b84d8000)
        libdbus-1.so.3 => /lib/x86_64-linux-gnu/libdbus-1.so.3 (0x00007f02b8485000)
        libpng16.so.16 => /lib/x86_64-linux-gnu/libpng16.so.16 (0x00007f02b844c000)
        libXext.so.6 => /lib/x86_64-linux-gnu/libXext.so.6 (0x00007f02b8437000)
        libsystemd.so.0 => /lib/x86_64-linux-gnu/libsystemd.so.0 (0x00007f02b8394000)
        liblzma.so.5 => /lib/x86_64-linux-gnu/liblzma.so.5 (0x00007f02b836c000)
        liblz4.so.1 => /lib/x86_64-linux-gnu/liblz4.so.1 (0x00007f02b834d000)
        libgcrypt.so.20 => /lib/x86_64-linux-gnu/libgcrypt.so.20 (0x00007f02b8228000)
        libgpg-error.so.0 => /lib/x86_64-linux-gnu/libgpg-error.so.0 (0x00007f02b8205000)

what to do next?thank you!

JonB

@mywings19 said in qt.qpa.plugin: Could not load the Qt platform plugin "xcb" in "" even though it was found.:

Then I've set 'export QT_DEBUG_PLUGINS=1'
but there's no extra error message,qtcreator is running normally

Have you actually run whatever executable raises the error (Qt Creator itself?? Your application?) from the shell where you set this environment variable, like all the posts tell you to? Because if so you should get a whole bunch of diagnostic output lines....

mywings19

@JonB

sugon@EC:~$ cat ~/.bashrc
# ~/.bashrc: executed by bash(1) for non-login shells.
# see /usr/share/doc/bash/examples/startup-files (in the package bash-doc)
# for examples

# If not running interactively, don't do anything
case $- in
    *i*) ;;
      *) return;;
esac

# don't put duplicate lines or lines starting with space in the history.
# See bash(1) for more options
HISTCONTROL=ignoreboth

# append to the history file, don't overwrite it
shopt -s histappend

# for setting history length see HISTSIZE and HISTFILESIZE in bash(1)
HISTSIZE=1000
HISTFILESIZE=2000

# check the window size after each command and, if necessary,
# update the values of LINES and COLUMNS.
shopt -s checkwinsize

# If set, the pattern "**" used in a pathname expansion context will
# match all files and zero or more directories and subdirectories.
#shopt -s globstar

# make less more friendly for non-text input files, see lesspipe(1)
#[ -x /usr/bin/lesspipe ] && eval "$(SHELL=/bin/sh lesspipe)"

# set variable identifying the chroot you work in (used in the prompt below)
if [ -z "${debian_chroot:-}" ] && [ -r /etc/debian_chroot ]; then
    debian_chroot=$(cat /etc/debian_chroot)
fi

# set a fancy prompt (non-color, unless we know we "want" color)
case "$TERM" in
    xterm-color|*-256color) color_prompt=yes;;
esac

# uncomment for a colored prompt, if the terminal has the capability; turned
# off by default to not distract the user: the focus in a terminal window
# should be on the output of commands, not on the prompt
#force_color_prompt=yes

if [ -n "$force_color_prompt" ]; then
    if [ -x /usr/bin/tput ] && tput setaf 1 >&/dev/null; then
        # We have color support; assume it's compliant with Ecma-48
        # (ISO/IEC-6429). (Lack of such support is extremely rare, and such
        # a case would tend to support setf rather than setaf.)
        color_prompt=yes
    else
        color_prompt=
    fi
fi

if [ "$color_prompt" = yes ]; then
    PS1='${debian_chroot:+($debian_chroot)}\[\033[01;32m\]\u@\h\[\033[00m\]:\[\033[01;34m\]\w\[\033[00m\]\$ '
else
    PS1='${debian_chroot:+($debian_chroot)}\u@\h:\w\$ '
fi
unset color_prompt force_color_prompt

# If this is an xterm set the title to user@host:dir
case "$TERM" in
xterm*|rxvt*)
    PS1="\[\e]0;${debian_chroot:+($debian_chroot)}\u@\h: \w\a\]$PS1"
    ;;
*)
    ;;
esac

# enable color support of ls and also add handy aliases
if [ -x /usr/bin/dircolors ]; then
    test -r ~/.dircolors && eval "$(dircolors -b ~/.dircolors)" || eval "$(dircolors -b)"
    alias ls='ls --color=auto'
    #alias dir='dir --color=auto'
    #alias vdir='vdir --color=auto'

    #alias grep='grep --color=auto'
    #alias fgrep='fgrep --color=auto'
    #alias egrep='egrep --color=auto'
fi

# colored GCC warnings and errors
#export GCC_COLORS='error=01;31:warning=01;35:note=01;36:caret=01;32:locus=01:quote=01'

# some more ls aliases
#alias ll='ls -l'
#alias la='ls -A'
#alias l='ls -CF'

# Alias definitions.
# You may want to put all your additions into a separate file like
# ~/.bash_aliases, instead of adding them here directly.
# See /usr/share/doc/bash-doc/examples in the bash-doc package.

if [ -f ~/.bash_aliases ]; then
    . ~/.bash_aliases
fi

# enable programmable completion features (you don't need to enable
# this, if it's already enabled in /etc/bash.bashrc and /etc/profile
# sources /etc/bash.bashrc).
if ! shopt -oq posix; then
  if [ -f /usr/share/bash-completion/bash_completion ]; then
    . /usr/share/bash-completion/bash_completion
  elif [ -f /etc/bash_completion ]; then
    . /etc/bash_completion
  fi
fi
# Set LS_COLORS environment by Deepin
if [[ ("$TERM" = *256color || "$TERM" = screen* || "$TERM" = xterm* ) && -f /etc/lscolor-256color ]]; then
    eval $(dircolors -b /etc/lscolor-256color)
else
    eval $(dircolors)
fi

export QT_DEBUG_PLUGINS=1
export QT_QPA_PLATFORM_PLUGIN_PATH=/home/sugon/Software/qtcreator8.0.1/lib/Qt/plugins/platforms
sugon@EC:~$ source ~/.bashrc
sugon@EC:~$ ~/Software/qtcreator8.0.1/bin/qtcreator
sugon@EC:~$ ~/QtProject/build-Test-Qt_6_3_1_in_PATH_Qt6_3_1-Debug/Test
qt.qpa.plugin: Could not load the Qt platform plugin "xcb" in "/home/sugon/Software/qtcreator8.0.1/lib/Qt/plugins/platforms" even though it was found.
This application failed to start because no Qt platform plugin could be initialized. Reinstalling the application may fix this problem.

Available platform plugins are: linuxfb, minimal, offscreen, vnc, eglfs, minimalegl, vkkhrdisplay, wayland-egl, wayland, xcb.

Aborded
sugon@EC:~$ ldd ~/Software/qtcreator8.0.1/lib/Qt/plugins/platforms/libqxcb.so 
        linux-vdso.so.1 (0x00007ffeb7df5000)
        libQt6XcbQpa.so.6 => /home/sugon/Software/qtcreator8.0.1/lib/Qt/plugins/platforms/../../lib/libQt6XcbQpa.so.6 (0x00007fd7162df000)
        libxkbcommon-x11.so.0 => /lib/x86_64-linux-gnu/libxkbcommon-x11.so.0 (0x00007fd7162b0000)
        libxkbcommon.so.0 => /lib/x86_64-linux-gnu/libxkbcommon.so.0 (0x00007fd71626e000)
        libxcb-icccm.so.4 => /lib/x86_64-linux-gnu/libxcb-icccm.so.4 (0x00007fd716267000)
        libxcb-image.so.0 => /lib/x86_64-linux-gnu/libxcb-image.so.0 (0x00007fd716261000)
        libxcb-keysyms.so.1 => /lib/x86_64-linux-gnu/libxcb-keysyms.so.1 (0x00007fd71625c000)
        libxcb-randr.so.0 => /lib/x86_64-linux-gnu/libxcb-randr.so.0 (0x00007fd716248000)
        libxcb-render-util.so.0 => /lib/x86_64-linux-gnu/libxcb-render-util.so.0 (0x00007fd716241000)
        libxcb-shm.so.0 => /lib/x86_64-linux-gnu/libxcb-shm.so.0 (0x00007fd71623c000)
        libxcb-sync.so.1 => /lib/x86_64-linux-gnu/libxcb-sync.so.1 (0x00007fd716232000)
        libxcb-xfixes.so.0 => /lib/x86_64-linux-gnu/libxcb-xfixes.so.0 (0x00007fd716228000)
        libxcb-render.so.0 => /lib/x86_64-linux-gnu/libxcb-render.so.0 (0x00007fd716219000)
        libxcb-shape.so.0 => /lib/x86_64-linux-gnu/libxcb-shape.so.0 (0x00007fd716212000)
        libxcb-xkb.so.1 => /lib/x86_64-linux-gnu/libxcb-xkb.so.1 (0x00007fd7161f4000)
        libxcb.so.1 => /lib/x86_64-linux-gnu/libxcb.so.1 (0x00007fd7161ca000)
        libQt6OpenGL.so.6 => /home/sugon/Software/qtcreator8.0.1/lib/Qt/plugins/platforms/../../lib/libQt6OpenGL.so.6 (0x00007fd716128000)
        libQt6Gui.so.6 => /home/sugon/Software/qtcreator8.0.1/lib/Qt/plugins/platforms/../../lib/libQt6Gui.so.6 (0x00007fd7157a5000)
        libGL.so.1 => /lib/x86_64-linux-gnu/libGL.so.1 (0x00007fd715711000)
        libQt6Core.so.6 => /home/sugon/Software/qtcreator8.0.1/lib/Qt/plugins/platforms/../../lib/libQt6Core.so.6 (0x00007fd7150ac000)
        libX11-xcb.so.1 => /lib/x86_64-linux-gnu/libX11-xcb.so.1 (0x00007fd7150a7000)
        libX11.so.6 => /lib/x86_64-linux-gnu/libX11.so.6 (0x00007fd714f66000)
        libdl.so.2 => /lib/x86_64-linux-gnu/libdl.so.2 (0x00007fd714f61000)
        libpthread.so.0 => /lib/x86_64-linux-gnu/libpthread.so.0 (0x00007fd714f40000)
        libstdc++.so.6 => /lib/x86_64-linux-gnu/libstdc++.so.6 (0x00007fd714dbc000)
        libm.so.6 => /lib/x86_64-linux-gnu/libm.so.6 (0x00007fd714c37000)
        libgcc_s.so.1 => /lib/x86_64-linux-gnu/libgcc_s.so.1 (0x00007fd714c1d000)
        libc.so.6 => /lib/x86_64-linux-gnu/libc.so.6 (0x00007fd714a5c000)
        libglib-2.0.so.0 => /lib/x86_64-linux-gnu/libglib-2.0.so.0 (0x00007fd71493d000)
        libgthread-2.0.so.0 => /lib/x86_64-linux-gnu/libgthread-2.0.so.0 (0x00007fd714938000)
        libxcb-util.so.0 => /lib/x86_64-linux-gnu/libxcb-util.so.0 (0x00007fd71492c000)
        libXau.so.6 => /lib/x86_64-linux-gnu/libXau.so.6 (0x00007fd714927000)
        libXdmcp.so.6 => /lib/x86_64-linux-gnu/libXdmcp.so.6 (0x00007fd71491f000)
        libEGL.so.1 => /lib/x86_64-linux-gnu/libEGL.so.1 (0x00007fd71490a000)
        libfontconfig.so.1 => /lib/x86_64-linux-gnu/libfontconfig.so.1 (0x00007fd7148c4000)
        libQt6DBus.so.6 => /home/sugon/Software/qtcreator8.0.1/lib/Qt/plugins/platforms/../../lib/libQt6DBus.so.6 (0x00007fd7147f2000)
        libz.so.1 => /lib/x86_64-linux-gnu/libz.so.1 (0x00007fd7147d5000)
        libfreetype.so.6 => /lib/x86_64-linux-gnu/libfreetype.so.6 (0x00007fd714719000)
        libGLX.so.0 => /lib/x86_64-linux-gnu/libGLX.so.0 (0x00007fd7146e5000)
        libGLdispatch.so.0 => /lib/x86_64-linux-gnu/libGLdispatch.so.0 (0x00007fd714628000)
        libicui18n.so.56 => /home/sugon/Software/qtcreator8.0.1/lib/Qt/plugins/platforms/../../lib/libicui18n.so.56 (0x00007fd71418d000)
        libicuuc.so.56 => /home/sugon/Software/qtcreator8.0.1/lib/Qt/plugins/platforms/../../lib/libicuuc.so.56 (0x00007fd713dd5000)
        libicudata.so.56 => /home/sugon/Software/qtcreator8.0.1/lib/Qt/plugins/platforms/../../lib/libicudata.so.56 (0x00007fd7123f2000)
        librt.so.1 => /lib/x86_64-linux-gnu/librt.so.1 (0x00007fd7123e8000)
        /lib64/ld-linux-x86-64.so.2 (0x00007fd716397000)
        libpcre.so.3 => /lib/x86_64-linux-gnu/libpcre.so.3 (0x00007fd712374000)
        libbsd.so.0 => /lib/x86_64-linux-gnu/libbsd.so.0 (0x00007fd71235a000)
        libexpat.so.1 => /lib/x86_64-linux-gnu/libexpat.so.1 (0x00007fd71231b000)
        libuuid.so.1 => /lib/x86_64-linux-gnu/libuuid.so.1 (0x00007fd712312000)
        libdbus-1.so.3 => /lib/x86_64-linux-gnu/libdbus-1.so.3 (0x00007fd7122bf000)
        libpng16.so.16 => /lib/x86_64-linux-gnu/libpng16.so.16 (0x00007fd712286000)
        libXext.so.6 => /lib/x86_64-linux-gnu/libXext.so.6 (0x00007fd712271000)
        libsystemd.so.0 => /lib/x86_64-linux-gnu/libsystemd.so.0 (0x00007fd7121ce000)
        liblzma.so.5 => /lib/x86_64-linux-gnu/liblzma.so.5 (0x00007fd7121a6000)
        liblz4.so.1 => /lib/x86_64-linux-gnu/liblz4.so.1 (0x00007fd712187000)
        libgcrypt.so.20 => /lib/x86_64-linux-gnu/libgcrypt.so.20 (0x00007fd712062000)
        libgpg-error.so.0 => /lib/x86_64-linux-gnu/libgpg-error.so.0 (0x00007fd71203f000)
sugon@EC:~$