Passing data between threads.

jenya7

@jsulm said in Passing data between threads.:

@jenya7 I would not invent threads without knowing whether I really need them. Start without threads and see how it works. Only if needed add threads.

Ok. I'll try.

KroMignon

@jenya7 said in Passing data between threads.:

It'll be 3 sockets getting messages at very high rate (streaming video) and putting it into a queue. So I thought it would be better to have a separate thread to pull and parse messages. I have 4 cores so I hope for some parallelism.

As @jsulm already wrote, I would also suggest you first to try it out without using additional thread.
And second, do not use QConcurrent::run() to create a thread, because this thread will not contain an event loop and then you cannot use signals/slots!

To use additional thread, prefer something like this:

auto reader = new MyUDP();
auto thread = new QThread();
// on thread start, start UDP socket ==> create all QObject there to ensure they are working in the right thread!!
connect(thread, &QThread::started, reader, &MyUDP::start);
// on reader end, stop working thread
connect(reader, &MyUDP::aboutToQuit, thread, &QThread::quit);
// on working thread end, delete all instances (cleanup)
connect(thread, &QThread::finished, thread, &QObject::deleteLater);
connect(thread, &QThread::finished, reader, &QObject::deleteLater);

// start working thread
thread->start();

jenya7

@KroMignon
Thank you. And how do I pass a queue between a reader and a consumer (parser) ?

jsulm

@jenya7 said in Passing data between threads.:

And how do I pass a queue between a reader and a consumer (parser) ?

I suggested to not to pass/share the queue. Instead pass the actual data and manage the queue only where you need it.

KroMignon

@jenya7 said in Passing data between threads.:

Thank you. And how do I pass a queue between a reader and a consumer (parser) ?

I don't understand why you think you need to use an additional queue?
Messages are already queued by the UDP socket, why not processing them on reception?

jenya7

I see. Just can't get rid of embedded programming concepts.

jenya7

Just to clarify. If I instantiate 3 sockets.

static MyUDP udp_1;
static MyUDP udp_2;
static MyUDP udp_3;

int main(int argc, char *argv[])
{
    QCoreApplication a(argc, argv);

    udp_1.Start("192.176.0.1", 8001);
    udp_2.Start("192.176.0.2", 8002);
    udp_3.Start("192.176.0.3", 8003);

    return a.exec();
}

How it gets messages simultaneously in one thread?

jsulm

@jenya7 said in Passing data between threads.:

How it gets messages simultaneously in one thread?

Please read https://doc.qt.io/qt-5/qtnetwork-index.html and https://doc.qt.io/qt-5/signalsandslots.html
Qt is an asynchronous framework.

jenya7

@jsulm said in Passing data between threads.:

@jenya7 said in Passing data between threads.:

How it gets messages simultaneously in one thread?

Please read https://doc.qt.io/qt-5/qtnetwork-index.html and https://doc.qt.io/qt-5/signalsandslots.html
Qt is an asynchronous framework.

I see. Looks like Qt takes care 90% of stuff I have to worry in embedded programming. :)

KroMignon

@jenya7 said in Passing data between threads.:

Just to clarify. If I instantiate 3 sockets.

Please, be kind and never do something like this!!!

Never create global static instances of QObject base classes!!!
This is not supported be Qt.
QApplication, QCodeApplication or QGuiApplication must be create before any other QObject base class instance or your application will crash somehow!

Do something like this:

int main(int argc, char *argv[])
{
    QCoreApplication a(argc, argv);

    MyUDP udp_1;
    MyUDP udp_2;
    MyUDP udp_3;

    udp_1.Start("192.176.0.1", 8001);
    udp_2.Start("192.176.0.2", 8002);
    udp_3.Start("192.176.0.3", 8003);

    return a.exec();
}

jenya7

I added a signal

class UDP : public QObject
{
    Q_OBJECT

    public:
    UDP(QObject *parent = nullptr);

     //////////////////////////////////////////////////////

    signals:
    void ReadyForReader(const NET_PARAM& param, const QByteArray data);

    //////////////////////////////////////////////////////////
};

and in a reader I add a slot

class READER
{
    public:
    READER();

    public slots:
    void ReadyForReader(const NET_PARAM& param, const QByteArray data);
};

Now in main

static UDP udp_1;
static UDP udp_2;

static READER reader;

int main(int argc, char *argv[])
{
    QCoreApplication a(argc, argv);

    QObject::connect(&udp_1, &UDP::ReadyForReader, &reader, &READER::ReadyForReader);
    QObject::connect(&udp_2, &UDP::ReadyForReader, &reader, &READER::ReadyForReader);

    udp_1.Start("192.176.0.1", 8001);
    udp_1.Start("192.176.0.2", 8002);

    return a.exec();
}

I get

C:\Qt\5.12.0\mingw73_64\include\QtCore\qobject.h:250: error: no matching function for call to 'QObject::connectImpl(const Object*&, void**, const Object*&, void**, QtPrivate::QSlotObject<void (READER::)(const NET_PARAM&, QByteArray), QtPrivate::List<const NET_PARAM&, QByteArray>, void>, Qt::ConnectionType&, const int*&, const QMetaObject*)'
return connectImpl(sender, reinterpret_cast<void **>(&signal),
~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
receiver, reinterpret_cast<void **>(&slot),
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
new QtPrivate::QSlotObject<Func2, typename QtPrivate::List_Left<typename SignalType::Arguments, SlotType::ArgumentCount>::Value,
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
typename SignalType::ReturnType>(slot),
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
type, types, &SignalType::Object::staticMetaObject);
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

What I did wrong?

Christian Ehrlicher

@jenya7 said in Passing data between threads.:

static UDP udp_1;
static UDP udp_2;

static READER reader;

Still static...

For signals/slots your class must be derived from QObject. Please read the documentation.

jenya7

@Christian-Ehrlicher
Thank you.
Without static I get warning - warning: no previous extern declaration for non-static variable 'udp_1'.
I can do like this

int main(int argc, char *argv[])
{
    UDP udp_1;
    UDP udp_2;

    READER reader;

    QCoreApplication a(argc, argv);

    QObject::connect(&udp_1, &UDP::ReadyForReader, &reader, &READER::ReadyForReader);
    QObject::connect(&udp_2, &UDP::ReadyForReader, &reader, &READER::ReadyForReader);

    udp_1.Start("192.176.0.1", 8001);
    udp_2.Start("192.176.0.2", 8002);

    return a.exec();
}

But this way the objects allocated on stack.

Christian Ehrlicher

@jenya7 said in Passing data between threads.:

But this way the objects allocated on stack.

And what's the problem with it? And if it's really a problem (for whatever reason) you can allocate them with new and delete them later on or use a shared_ptr or similar.

jsulm

@jenya7 You should more carefully read what others write!
As @KroMignon wrote: all QObject based class instances have to be created AFTER QCoreApplication a(argc, argv)!
And as also was mentioned here: your classes have to be subclassed from QObject to use signals/slots. Please read the links I gave you!

"no previous extern declaration for non-static variable 'udp_1'." - did you include the header file?

jenya7

@jsulm said in Passing data between threads.:

@jenya7 You should more carefully read what others write!
As @KroMignon wrote: all QObject based class instances have to be created AFTER QCoreApplication a(argc, argv)!
And as also was mentioned here: your classes have to be subclassed from QObject to use signals/slots. Please read the links I gave you!

"no previous extern declaration for non-static variable 'udp_1'." - did you include the header file?

I see.
Fixed

class READER : public QObject
{
    Q_OBJECT

    public:
    READER(QObject *parent = nullptr);

    public slots:
    void ReadyForReader(const NET_PARAM& param, const QByteArray data);
};

And

#include "udp.h"
#include "reader.h"

int main(int argc, char *argv[])
{
    QCoreApplication a(argc, argv);

    UDP udp_1;
    UDP udp_2;

    READER reader;

    QObject::connect(&udp_1, &UDP::ReadyForReader, &reader, &READER::ReadyForReader);
    QObject::connect(&udp_2, &UDP::ReadyForReader, &reader, &READER::ReadyForReader);

    udp_1.Start("192.176.0.1", 8001);
    udp_2.Start("192.176.0.2", 8002);

    return a.exec();
}

I get - error: undefined reference to `vtable for READER'

jsulm

@jenya7 said in Passing data between threads.:

I get - error: undefined reference to `vtable for READER'

Did you put your READER class into its own header file?
If so then please do a complete rebuild:

Delete build folder
Run qmake
Build

KroMignon

@jenya7 said in Passing data between threads.:

But this way the objects allocated on stack.

Did you read my previous post? Never create QObject based instance before QCoreApplication

jenya7

@jsulm said in Passing data between threads.:

@jenya7 said in Passing data between threads.:

I get - error: undefined reference to `vtable for READER'

Did you put your READER class into its own header file?
If so then please do a complete rebuild:

Delete build folder

Run qmake

Build

Yes. I do - Add->Class and it generates reader.cpp and reader.h.
Thank you. Now it's OK.

jenya7

@Christian-Ehrlicher said in Passing data between threads.:

@jenya7 said in Passing data between threads.:

But this way the objects allocated on stack.

And what's the problem with it?

I don't know how the stack is configured and managed in a regular PC but in embedded systems it's a precious resource and there are many chances to run into a stack overflow.