Convert QbyteArray to qreal

Christian Ehrlicher

@dziko147 said in Convert QbyteArray to qreal:

I hope that my problem looks clear .

No since you still not tell us how the sender encodes the data and what value you expect.

KroMignon

@dziko147 said in Convert QbyteArray to qreal:

I hope that my problem looks clear .

Sorry but it is not clear to me :-(

What do represents "FF10001000100010001000100010001000", which is your test data?

dziko147

@KroMignon Exact . I write manually this test data .
@Christian-Ehrlicher I will receive a frame using QCanBusFrame , So the data will be in a QByteArray variable . I expect a Rpm Value wich is real .

Christian Ehrlicher

@dziko147 said in Convert QbyteArray to qreal:

. I expect a Rpm Value wich is real .

This tells us nothing. real just tells that the value is a floating-point value. It does not tell how this value is encoded and since you can't/won't tell us this you have to find it out by yourself. Two possibilities were already given to you, other encodings are unknown to us and therefore you're on your own when none of them works.

KroMignon

@dziko147 said in Convert QbyteArray to qreal:

Exact . I write manually this test data .

I don't know how to say it more clearly:

What does this represent?
Is it a hexadecimal representation of your test data?
CAN frame have a maximum of 8 Byte of payload, this is much more data, so what is it?

You should be able to answer those questions, or you are not knowing what you are doing. Which is very bad.

dziko147

@Christian-Ehrlicher I do not know how the sender encodes the data .
What I know is I receive data using the QCanBusFrame . then I extract the data .
So i get a QByteArray Data . I want to convert it .

dziko147

@KroMignon Can you give me an example of a QByteArray compouned of 5bytes ?

KroMignon

@dziko147 said in Convert QbyteArray to qreal:

Can you give me an example of a QByteArray compouned of 5bytes ?

Yes, here are many examples:

QByteArray b1("ABCDE");
QByteArray b2;
b2.resize(5);
b2[0] = 0x3c;
b2[1] = 0xb8;
b2[2] = 0x64;
b2[3] = 0x18;
b3[4] = 0xca;

QByteArray b3 = QByteArray:fromHex("0102030405");

JonB

@dziko147 said in Convert QbyteArray to qreal:

@Christian-Ehrlicher I do not know how the sender encodes the data .

If you do not know how the data is encoded/sent, @Christian-Ehrlicher does not....

dziko147

@KroMignon
I get value =0 after converting :/

jsulm

@dziko147 said in Convert QbyteArray to qreal:

I do not know how the sender encodes the data

Then how do you want to decode it?
You should at least get some data from sender where you know what exact numbers the sender sent, then you can try to find out how the data was encoded.

JonB

@dziko147
After converting.... what? how?

Tell you what: tell us two things:

Forget about converting anything to float. Show us what the values of the first 5 bytes you receive are. (You say the first byte is a status byte and the next 4 bytes are the value you are interested in, right?)
Tell us what floating point number you know that encodes/conveys/sends. (Please make sure it is not 0!)

KroMignon

@dziko147 said in Convert QbyteArray to qreal:

I get value =0 after converting :/

After converting what?
Please, take time to understand what are the data you want to convert.
I cannot do this for you!

dziko147

@KroMignon
QByteArray rpmdata = QByteArray::fromHex("0102030405"); ---> I want to
convert this .
qDebug() << rpmdata << "this is data" ;
QDataStream stream(rpmdata);
quint8 byte;
float rpmfloat;
stream >> byte; // skip first byte
stream >> rpmfloat; // read float value
qDebug() << rpmfloat << "this is data to float" ;
back.setValue(rpmfloat); ----> I display the value converted here .

JonB

@dziko147
You push raw bytes into a QDataStream. You then try to read that back as, say, a float.

Unless I have misunderstood QDataStream you cannot do that. It is a structured stream. E.g. it will (well, should) contain "markers" for the data and its types.

Experts, I am right here, aren't I (have never used QDataStream)?

UPDATE
For anyone reading this, the expert answers below indicate this is not the case, and my understanding was incorrect.

Christian Ehrlicher

@JonB said in Convert QbyteArray to qreal:

E.g. it will (well, should) contain "markers" for the data and its types.

Not for PODs. For QString e.g. a length field is added. What is added for which build-in Qt type is not documented - QDataStream is not meant to be used with anything else than a QDataStream.

KroMignon

@JonB said in Convert QbyteArray to qreal:

Unless I have misunderstood QDataStream you cannot do that. It is a structured stream. E.g. it will (well, should) contain "markers" for the data and its types.

Of course this is possible, this is no "marker" for serializing/deserializing "base types" like float, double, q(u)int8, q(u)int16, etc.

But "02030405" converted to float is 9.6255135462533111609068148127E-38... almost 0 ;)

KroMignon

@dziko147 said in Convert QbyteArray to qreal:

QByteArray rpmdata = QByteArray::fromHex("0102030405"); ---> I want to
convert this .

What did you expect?
Again, you have to know what you are doing.

Here you are converting this array of bytes { 0x02, 0x03, 0x04, 0x05 } to float.
which is 9.6255135462533111609068148127E-38, almost 0.

If you change the array to something else like "014F030405", which means converting { 0x4f, 0x03, 0x04 , 0x05} to float, you will obtain 2.19807872E9 (almost 2.2 Billion)

==> cf. https://www.binaryconvert.com/convert_float.html

dziko147

@KroMignon I tried this :
QByteArray rpmdata;
rpmdata.resize(4);
rpmdata[0] = 0x43;
rpmdata[1] = 0x96;
rpmdata[2] = 0x7D;
rpmdata[3] = 0xA6;
qDebug() << rpmdata << "this is data" ;

QDataStream stream(rpmdata);

float value;
stream >> value; // read float value
qDebug() << value << "this is data to float" ;

back.setValue(value);

I get :

the 43967DA6 = (300.98163 ) .
this is the the variable

KroMignon

@dziko147 said in Convert QbyteArray to qreal:

the 43967DA6 = (300.98163 ) .

Sorry, my bad, it seems there are something I had forgot about QDataStream: when using float you have to specify floating point precision with stream.setFloatingPointPrecision(QDataStream::SinglePrecision);.

~~The other way is to use qfloat16~~ (WRONG)

QByteArray rpmdata;
rpmdata.resize(4);
rpmdata[0] = 0x43;
rpmdata[1] = 0x96;
rpmdata[2] = 0x7D;
rpmdata[3] = 0xA6;
qDebug() << rpmdata << "this is data" ;

QDataStream stream(rpmdata);

stream.setFloatingPointPrecision(QDataStream::SinglePrecision);
float value;
stream >> value; // read float value
qDebug() << value << "this is data to float" ;

back.setValue(value);