QTSerialBUS giving qt.canbus.plugins.socketcan: Cannot apply parameter: 4 with value: 1000000.

lera

Hi Garza,

to get rid of the RTNETLINK answers: Operation not permitted error run the application as root , as described in the Configuration parameter key section here: https://doc.qt.io/qt-5/qtserialbus-socketcan-overview.html#creating-can-bus-devices

I am running the can example project as root, but still get message:
qt.canbus.plugins.socketcan: Cannot apply parameter: 4 with value: 1000000

Can anyone help?

Regards,
lera

aha_1980

Hi @lera,

can you add a qDebug() << m_canDevice->errorString() to the example, around line 150 in mainwindow.cpp after the configuration is applied, and see what this gives?

Regards

lera

Hi @aha_1980 ,

the error string placed around line 150 is empty.

However, the configuration is applied when connectDevice() is called (this is what causes the mentioned error message). Querying the error from the CAN device right after connecting doesn't return an error either...

BR

aha_1980

Hi @lera,

However, the configuration is applied when connectDevice() is called (this is what causes the mentioned error message).

ah ok. Well, then try placing the qDebug() after the connectDevice() line and see if this gives more insight...

You do have libsocketcan installed, do you?

Regards

lera

Hi @aha_1980 ,

querying the error from the CAN device right after connectDevice() doesn't return an error either.

libsocketcan is installed.

BR

aha_1980

Hi @lera,

strange. Can you file a bugreport at bugreports.qt.io and add a link to the report here?

Thanks!

Edit: Forget what I said. I can see where the error comes from:

https://code.woboq.org/qt5/qtserialbus/src/plugins/canbus/socketcan/socketcanbackend.cpp.html#376 must be changed to:

success = libSocketCan->setBitrate(canSocketName, bitRate);

I will create a patch soon.

aha_1980

Hi @lera,

I've modified the code for testing, but the error persists.

I think the bitrate cannot be changed while the interface is up, so the change might be a bigger one. Can you please create a bugreport on bugreports.qt.io and add a link from here so others can follow later?

Thanks and regards

lera

Hi,

the bug is reported here: https://bugreports.qt.io/browse/QTBUG-89066

Thank you @aha_1980 for supporting!

Regards

aha_1980

Hi @lera,

thanks! No promises for a fast fix though, I'm pretty busy ATM.

Regards

mbn12

I am trygin to use QT 5.15 CANBus without success.

Based on the forum messages and open issues, the bug still persists? QTSerialBUS/SocketCAN is completely unusable in 5.15 as of today? Or is there any workaround?

Thank you

lera

Hi @mbn12 ,
the bug still persists. However, it only concerns setting the bitrate from an application. Workaround: The bitrate needs to be set when the interface is brought up:

ip link set can0 up type can bitrate 1000000

BR

danielvolt

@lera what do you mean by this? I'm trying to use the CANBus but it won't work. Could you please elaborate on how to get around "qt.canbus.plugins.socketcan: Cannot apply parameter: 4 with value: 500000."?

I tried setting the bitrate when i bring up the interface on boot, i get : "RTNETLINK answers: Device or resource busy
qt.canbus.plugins.socketcan: Cannot apply parameter: 4 with value: 500000."

atreat

You can workaround this by doing m_canDevice->setConfigurationParameter(QCanBusDevice::BitRateKey, QVariant()); before the call to connectDevice...

tozymandias

@atreat

All, I know this is quite old ... but the suggested workaround is not working for me.

I am just not able to use socketcan on raspberry pi with QT at the moment.
I can make "candump can0" work with 500Kbit bitrate setting from the command line, but I am just not able to view CAN traffic using my application.

Does anybody have an example code snippet showcasing the workaround ?

Is there a patch or fix for this? I have not been able to find anything.

Thanks.