3D Install Qt6

ofmrew · @ofmrew Again, I also found zlib 1.2.11, but no way to install.

@ofmrew I installed zlib1g-dev and it might be working!

ofmrew

@ofmrew I spoke too soon.
home/bob/.conan/data/qt3d/6.0.1/qt/final/build/9105b5b4ab5d474532cfc28699da368141e8a4cf/src/render/surfaces/vulkaninstance.cpp: In lambda function:
/home/bob/.conan/data/qt3d/6.0.1/qt/final/build/9105b5b4ab5d474532cfc28699da368141e8a4cf/src/render/surfaces/vulkaninstance.cpp:54:34: error: invalid use of incomplete type ‘class QVulkanInstance’
54 | QVulkanInstance* v = new QVulkanInstance;
| ^~~~~~~~~~~~~~~
In file included from /home/bob/Qt/6.0.1/gcc_64/include/QtGui/qbackingstore.h:46,
from /home/bob/Qt/6.0.1/gcc_64/include/QtGui/QtGui:17,
from /home/bob/.conan/data/qt3d/6.0.1/qt/final/build/9105b5b4ab5d474532cfc28699da368141e8a4cf/include/Qt3DCore/Qt3DCoreDepends:4,
from /home/bob/.conan/data/qt3d/6.0.1/qt/final/build/9105b5b4ab5d474532cfc28699da368141e8a4cf/include/Qt3DCore/Qt3DCore:3,
from /home/bob/.conan/data/qt3d/6.0.1/qt/final/build/9105b5b4ab5d474532cfc28699da368141e8a4cf/src/render/CMakeFiles/3DRender.dir/cmake_pch.hxx:5,
from <command-line>:
/home/bob/Qt/6.0.1/gcc_64/include/QtGui/qwindow.h:94:7: note: forward declaration of ‘class QVulkanInstance’
94 | class QVulkanInstance;
| ^~~~~~~~~~~~~~~
/home/bob/.conan/data/qt3d/6.0.1/qt/final/build/9105b5b4ab5d474532cfc28699da368141e8a4cf/src/render/surfaces/vulkaninstance.cpp:61:14: error: invalid use of incomplete type ‘class QVulkanInstance’
61 | v->setLayers({ "VK_LAYER_KHRONOS_validation" });
| ^~
In file included from /home/bob/Qt/6.0.1/gcc_64/include/QtGui/qbackingstore.h:46,
from /home/bob/Qt/6.0.1/gcc_64/include/QtGui/QtGui:17,
from /home/bob/.conan/data/qt3d/6.0.1/qt/final/build/9105b5b4ab5d474532cfc28699da368141e8a4cf/include/Qt3DCore/Qt3DCoreDepends:4,
from /home/bob/.conan/data/qt3d/6.0.1/qt/final/build/9105b5b4ab5d474532cfc28699da368141e8a4cf/include/Qt3DCore/Qt3DCore:3,
from /home/bob/.conan/data/qt3d/6.0.1/qt/final/build/9105b5b4ab5d474532cfc28699da368141e8a4cf/src/render/CMakeFiles/3DRender.dir/cmake_pch.hxx:5,
from <command-line>:
/home/bob/Qt/6.0.1/gcc_64/include/QtGui/qwindow.h:94:7: note: forward declaration of ‘class QVulkanInstance’
94 | class QVulkanInstance;
| ^~~~~~~~~~~~~~~
/home/bob/.conan/data/qt3d/6.0.1/qt/final/build/9105b5b4ab5d474532cfc28699da368141e8a4cf/src/render/surfaces/vulkaninstance.cpp:63:15: error: invalid use of incomplete type ‘class QVulkanInstance’
63 | if (!v->create())
| ^~
In file included from /home/bob/Qt/6.0.1/gcc_64/include/QtGui/qbackingstore.h:46,
from /home/bob/Qt/6.0.1/gcc_64/include/QtGui/QtGui:17,
from /home/bob/.conan/data/qt3d/6.0.1/qt/final/build/9105b5b4ab5d474532cfc28699da368141e8a4cf/include/Qt3DCore/Qt3DCoreDepends:4,
from /home/bob/.conan/data/qt3d/6.0.1/qt/final/build/9105b5b4ab5d474532cfc28699da368141e8a4cf/include/Qt3DCore/Qt3DCore:3,
from /home/bob/.conan/data/qt3d/6.0.1/qt/final/build/9105b5b4ab5d474532cfc28699da368141e8a4cf/src/render/CMakeFiles/3DRender.dir/cmake_pch.hxx:5,
from <command-line>:
/home/bob/Qt/6.0.1/gcc_64/include/QtGui/qwindow.h:94:7: note: forward declaration of ‘class QVulkanInstance’
94 | class QVulkanInstance;
| ^~~~~~~~~~~~~~~
make[2]: *** [src/render/CMakeFiles/3DRender.dir/build.make:3815: src/render/CMakeFiles/3DRender.dir/surfaces/vulkaninstance.cpp.o] Error 1
make[2]: Leaving directory '/home/bob/.conan/data/qt3d/6.0.1/qt/final/build/9105b5b4ab5d474532cfc28699da368141e8a4cf'
make[1]: *** [CMakeFiles/Makefile2:2164: src/render/CMakeFiles/3DRender.dir/all] Error 2
make[1]: Leaving directory '/home/bob/.conan/data/qt3d/6.0.1/qt/final/build/9105b5b4ab5d474532cfc28699da368141e8a4cf'
make: *** [Makefile:144: all] Error 2
qt3d/6.0.1@qt/final:
qt3d/6.0.1@qt/final: ERROR: Package '9105b5b4ab5d474532cfc28699da368141e8a4cf' build failed
qt3d/6.0.1@qt/final: WARN: Build folder /home/bob/.conan/data/qt3d/6.0.1/qt/final/build/9105b5b4ab5d474532cfc28699da368141e8a4cf
ERROR: qt3d/6.0.1@qt/final: Error in build() method, line 121
self.run('cmake --build . %s' % cmake.build_config)
ConanException: Error 2 while executing cmake --build

SGaist

Looks like Vulkan is not as optional as stated in your logs above.

From memory, you need that SDK.

ofmrew

@SGaist Thanks for all your help so far, but exactly what do I need because I have looked and I have yet to find an installer for the Vulkan SDK and QVulkanInstance. I am at a loss. You should know because Qt is part of the Khronos group. Please help, we are so close to having 3D installed.

One other question: can I have both -g=cmake and -g qmake and it I have the latter do I need a -g qmake_paths?

SGaist

The page I linked provides a link to the SDK download page.

@ofmrew said in 3D Install Qt6:

You should know because Qt is part of the Khronos group..

I think there's a mistake here. I do not work for the Qt Company.

ofmrew

@SGaist Sorry about that, bad assumption on my part. It makes the help even more outstanding. Can you answer the question: can I have both -g=cmake and -g qmake and it I have the latter do I need a -g qmake_paths?

Also, do you know of a good reference on installing Valkan, I downloaded the sdk from the URL you provided, but I am stuck on how to proceed. Thanks.

SGaist

@ofmrew said in 3D Install Qt6:

Can you answer the question: can I have both -g=cmake and -g qmake and it I have the latter do I need a -g qmake_paths?

Sorry, that one I currently do not know.

@ofmrew said in 3D Install Qt6:

Also, do you know of a good reference on installing Valkan, I downloaded the sdk from the URL you provided, but I am stuck on how to proceed. Thanks.

Which distribution are you using ? For Ubuntu based there are easy to follow instructions.

ofmrew

@SGaist said in 3D Install Qt6:

Ubuntu

I got these and executed them:

Ubuntu
AMD It's best to enable a PPA for the latest Mesa drivers. There is a PPA that packages and releases the latest changes straight from Mesa's Git. Add the PPA to your system and update. Then, upgrade your system. It will automatically upgrade your existing Mesa packages.

$ sudo add-apt-repository ppa:oibaf/graphics-drivers
$ sudo apt update
$ sudo apt upgrade
When it's done, install the Vulkan packages.

apt install libvulkan1 mesa-vulkan-drivers vulkan-utils

NVIDIA Ubuntu also has a great repository for the NVIDIA proprietary drivers. Add it to your system, and update Apt.

$ sudo add-apt-repository ppa:graphics-drivers/ppa
$ sudo apt upgrade
Now, install your drivers and Vulkan.
$ sudo apt install nvidia-graphics-drivers-396 nvidia-settings vulkan vulkan-utils

But the conan install failed:
final/build/9105b5b4ab5d474532cfc28699da368141e8a4cf/src/render/CMakeFiles/3DRender.dir/cmake_pch.hxx -o CMakeFiles/3DRender.dir/surfaces/vulkaninstance.cpp.o -c /home/bob/.conan/data/qt3d/6.0.1/qt/final/build/9105b5b4ab5d474532cfc28699da368141e8a4cf/src/render/surfaces/vulkaninstance.cpp
/home/bob/.conan/data/qt3d/6.0.1/qt/final/build/9105b5b4ab5d474532cfc28699da368141e8a4cf/src/render/surfaces/vulkaninstance.cpp: In lambda function:
/home/bob/.conan/data/qt3d/6.0.1/qt/final/build/9105b5b4ab5d474532cfc28699da368141e8a4cf/src/render/surfaces/vulkaninstance.cpp:54:34: error: invalid use of incomplete type ‘class QVulkanInstance’
54 | QVulkanInstance* v = new QVulkanInstance;
| ^~~~~~~~~~~~~~~
In file included from /home/bob/Qt/6.0.1/gcc_64/include/QtGui/qbackingstore.h:46,
from /home/bob/Qt/6.0.1/gcc_64/include/QtGui/QtGui:17,
from /home/bob/.conan/data/qt3d/6.0.1/qt/final/build/9105b5b4ab5d474532cfc28699da368141e8a4cf/include/Qt3DCore/Qt3DCoreDepends:4,
from /home/bob/.conan/data/qt3d/6.0.1/qt/final/build/9105b5b4ab5d474532cfc28699da368141e8a4cf/include/Qt3DCore/Qt3DCore:3,
from /home/bob/.conan/data/qt3d/6.0.1/qt/final/build/9105b5b4ab5d474532cfc28699da368141e8a4cf/src/render/CMakeFiles/3DRender.dir/cmake_pch.hxx:5,
from <command-line>:
/home/bob/Qt/6.0.1/gcc_64/include/QtGui/qwindow.h:94:7: note: forward declaration of ‘class QVulkanInstance’
94 | class QVulkanInstance;
| ^~~~~~~~~~~~~~~
/home/bob/.conan/data/qt3d/6.0.1/qt/final/build/9105b5b4ab5d474532cfc28699da368141e8a4cf/src/render/surfaces/vulkaninstance.cpp:61:14: error: invalid use of incomplete type ‘class QVulkanInstance’
61 | v->setLayers({ "VK_LAYER_KHRONOS_validation" });
| ^~
In file included from /home/bob/Qt/6.0.1/gcc_64/include/QtGui/qbackingstore.h:46,
from /home/bob/Qt/6.0.1/gcc_64/include/QtGui/QtGui:17,
from /home/bob/.conan/data/qt3d/6.0.1/qt/final/build/9105b5b4ab5d474532cfc28699da368141e8a4cf/include/Qt3DCore/Qt3DCoreDepends:4,
from /home/bob/.conan/data/qt3d/6.0.1/qt/final/build/9105b5b4ab5d474532cfc28699da368141e8a4cf/include/Qt3DCore/Qt3DCore:3,
from /home/bob/.conan/data/qt3d/6.0.1/qt/final/build/9105b5b4ab5d474532cfc28699da368141e8a4cf/src/render/CMakeFiles/3DRender.dir/cmake_pch.hxx:5,
from <command-line>:
/home/bob/Qt/6.0.1/gcc_64/include/QtGui/qwindow.h:94:7: note: forward declaration of ‘class QVulkanInstance’
94 | class QVulkanInstance;
| ^~~~~~~~~~~~~~~
/home/bob/.conan/data/qt3d/6.0.1/qt/final/build/9105b5b4ab5d474532cfc28699da368141e8a4cf/src/render/surfaces/vulkaninstance.cpp:63:15: error: invalid use of incomplete type ‘class QVulkanInstance’
63 | if (!v->create())
| ^~
In file included from /home/bob/Qt/6.0.1/gcc_64/include/QtGui/qbackingstore.h:46,
from /home/bob/Qt/6.0.1/gcc_64/include/QtGui/QtGui:17,
from /home/bob/.conan/data/qt3d/6.0.1/qt/final/build/9105b5b4ab5d474532cfc28699da368141e8a4cf/include/Qt3DCore/Qt3DCoreDepends:4,
from /home/bob/.conan/data/qt3d/6.0.1/qt/final/build/9105b5b4ab5d474532cfc28699da368141e8a4cf/include/Qt3DCore/Qt3DCore:3,
from /home/bob/.conan/data/qt3d/6.0.1/qt/final/build/9105b5b4ab5d474532cfc28699da368141e8a4cf/src/render/CMakeFiles/3DRender.dir/cmake_pch.hxx:5,
from <command-line>:
/home/bob/Qt/6.0.1/gcc_64/include/QtGui/qwindow.h:94:7: note: forward declaration of ‘class QVulkanInstance’
94 | class QVulkanInstance;
| ^~~~~~~~~~~~~~~
make[2]: *** [src/render/CMakeFiles/3DRender.dir/build.make:3815: src/render/CMakeFiles/3DRender.dir/surfaces/vulkaninstance.cpp.o] Error 1
make[2]: Leaving directory '/home/bob/.conan/data/qt3d/6.0.1/qt/final/build/9105b5b4ab5d474532cfc28699da368141e8a4cf'
make[1]: *** [CMakeFiles/Makefile2:2164: src/render/CMakeFiles/3DRender.dir/all] Error 2
make[1]: Leaving directory '/home/bob/.conan/data/qt3d/6.0.1/qt/final/build/9105b5b4ab5d474532cfc28699da368141e8a4cf'
make: *** [Makefile:144: all] Error 2
qt3d/6.0.1@qt/final:
qt3d/6.0.1@qt/final: ERROR: Package '9105b5b4ab5d474532cfc28699da368141e8a4cf' build failed
qt3d/6.0.1@qt/final: WARN: Build folder /home/bob/.conan/data/qt3d/6.0.1/qt/final/build/9105b5b4ab5d474532cfc28699da368141e8a4cf
ERROR: qt3d/6.0.1@qt/final: Error in build() method, line 121
self.run('cmake --build . %s' % cmake.build_config)
ConanException: Error 2 while executing cmake --build .

What could be the problem?

SGaist

Looks like there's a missing include in the cpp file that triggers the error.

ofmrew

@SGaist That looks like one of the downloaded files: /home/bob/Qt/6.0.1/gcc_64/include/QtGui, but I am not sure if it is my problem or a bug? Any ideas?

ofmrew

Since the Linux 3D install is at a deadend, I am trying Win 10 but with no success. I am trying:

cd c:\Qt\Conan3D
conan.exe install qt3d/6.0.1@qt/final --build=missing --profile=C:/Qt/Tools/Conan/profiles/'''qt-6.0.2-mingw81_64''' -s build_type=Release -g cmake_paths -g=cmake -g qmake_paths -g=qmake -g deploy

cmd /k

I checked that the files and directories are correct and the only thing I sees that could cause a problem is "/" versus ""; howevr, I tried it both ways but still got the erro that the Profile was not found.

SGaist

What if you use backslashes for the path to the profile ?

ofmrew

@SGaist It was that and the three quotes. The following worked:

cd c:\Qt\Conan3D
conan.exe install qt3d/6.0.1@qt/final --build=missing --profile=C:\Qt\Tools\Conan\profiles\qt-6.0.2-mingw81_64 -s build_type=Release -g cmake_paths -g=cmake -g qmake_paths -g=qmake -g deploy
cmd /k
But I got this error:
CMake Error at CMakeLists.txt:3 (cmake_minimum_required):
CMake 3.15.0 or higher is required. You are running version 3.10.1
How do I get a version of cmake that will work with conan on Win 10.

SGaist

IIRC, you have the option to get it from the MaintenanceTool.

ofmrew

@ofmrew I looked at Qt\Tools and there is a CMake_64. Should this have been used?

ofmrew

@SGaist I do not see CMake as something that can be installed, unless I am looking in the wrong place. Any help would be appreciated.

SGaist

There's a separate entry in the Maintenance Tool to select Conan as well. You should found it there.

How did you install the current version you have ?

ofmrew

C:\Users\rwill>cd c:\Qt\Conan3D
The system cannot find the path specified.

C:\Users\rwill>
C:\Users\rwill>conan.exe install qt3d/6.0.1@qt/final --build=missing --profile=C:\Qt\Tools\Conan\profiles\qt-6.0.2-mingw81_64 -s build_type=Release -g cmake_paths -g=cmake -g qmake_paths -g=qmake -g deploy
Configuration:
[settings]
arch=x86_64
arch_build=x86_64
build_type=Release
compiler=gcc
compiler.libcxx=libstdc++11
compiler.version=5
os=Windows
os_build=Windows
[options]
qt6=6.0.2
[build_requires]
[env]
CC=gcc
CXX=g++
QT_PATH=C:\Qt\6.0.2/mingw81_64
qt3d/6.0.1@qt/final: WARN: Package binary is corrupted, removing: 0f29c7292f66ab3b189fa2809bdfcf230d253f0f
Installing package: qt3d/6.0.1@qt/final
Requirements
qt3d/6.0.1@qt/final from local cache - Cache
Packages
qt3d/6.0.1@qt/final:0f29c7292f66ab3b189fa2809bdfcf230d253f0f - Build

Installing (downloading, building) binaries...
qt3d/6.0.1@qt/final: WARN: Build folder is dirty, removing it: C:\Users\rwill.conan\data\qt3d\6.0.1\qt\final\build\0f29c7292f66ab3b189fa2809bdfcf230d253f0f
qt3d/6.0.1@qt/final: Copying sources to build folder
qt3d/6.0.1@qt/final: Building your package in C:\Users\rwill.conan\data\qt3d\6.0.1\qt\final\build\0f29c7292f66ab3b189fa2809bdfcf230d253f0f
qt3d/6.0.1@qt/final: Generator txt created conanbuildinfo.txt
qt3d/6.0.1@qt/final: Calling build()
CMAKE_PREFIX_PATH for 'qt3d/6.0.1' build is: C:\Qt\6.0.2/mingw81_64
CMAKE_PREFIX_PATH for 'qt3d/6.0.1' build is: C:\Qt\6.0.2/mingw81_64
CMake Error: CMake was unable to find a build program corresponding to "MinGW Makefiles". CMAKE_MAKE_PROGRAM is not set. You probably need to select a different build tool.
CMake Error: CMake was unable to find a build program corresponding to "MinGW Makefiles". CMAKE_MAKE_PROGRAM is not set. You probably need to select a different build tool.
CMake Error: CMAKE_CXX_COMPILER not set, after EnableLanguage
CMake Error: CMAKE_C_COMPILER not set, after EnableLanguage
-- Configuring incomplete, errors occurred!
qt3d/6.0.1@qt/final:
qt3d/6.0.1@qt/final: ERROR: Package '0f29c7292f66ab3b189fa2809bdfcf230d253f0f' build failed
qt3d/6.0.1@qt/final: WARN: Build folder C:\Users\rwill.conan\data\qt3d\6.0.1\qt\final\build\0f29c7292f66ab3b189fa2809bdfcf230d253f0f
ERROR: qt3d/6.0.1@qt/final: Error in build() method, line 120
self.run('%s "%s" %s' % (self._get_qtcmake(), self.source_folder, cmake.command_line))
ConanException: Error 1 while executing C:\Qt\6.0.2\mingw81_64\bin\qt-cmake.bat "C:\Users\rwill.conan\data\qt3d\6.0.1\qt\final\build\0f29c7292f66ab3b189fa2809bdfcf230d253f0f" -G "MinGW Makefiles" -DCMAKE_BUILD_TYPE="Release" -DCONAN_IN_LOCAL_CACHE="ON" -DCONAN_COMPILER="gcc" -DCONAN_COMPILER_VERSION="5" -DCONAN_CXX_FLAGS="-m64" -DCONAN_SHARED_LINKER_FLAGS="-m64" -DCONAN_C_FLAGS="-m64" -DCONAN_LIBCXX="libstdc++11" -DBUILD_SHARED_LIBS="OFF" -DCMAKE_INSTALL_PREFIX="C:\Users\rwill.conan\data\qt3d\6.0.1\qt\final\build\0f29c7292f66ab3b189fa2809bdfcf230d253f0f_install_tmp" -DCMAKE_INSTALL_BINDIR="bin" -DCMAKE_INSTALL_SBINDIR="bin" -DCMAKE_INSTALL_LIBEXECDIR="bin" -DCMAKE_INSTALL_LIBDIR="lib" -DCMAKE_INSTALL_INCLUDEDIR="include" -DCMAKE_INSTALL_OLDINCLUDEDIR="include" -DCMAKE_INSTALL_DATAROOTDIR="share" -DCMAKE_EXPORT_NO_PACKAGE_REGISTRY="ON" -DCONAN_EXPORTED="1" -DCMAKE_VERBOSE_MAKEFILE="ON" -Wno-dev

Any Ideas?

SGaist

AFAIK, it should target Ninja.

ofmrew

@SGaist I am not sure I understand. What should tartget Ninja.

And what about the message:
qt3d/6.0.1@qt/final: WARN: Package binary is corrupted, removing: 0f29c7292f66ab3b189fa2809bdfcf230d253f0f

I checked and the path to ninja is in PATH.

What do I need to do?