3D Install Qt6

ofmrew

Since the Linux 3D install is at a deadend, I am trying Win 10 but with no success. I am trying:

cd c:\Qt\Conan3D
conan.exe install qt3d/6.0.1@qt/final --build=missing --profile=C:/Qt/Tools/Conan/profiles/'''qt-6.0.2-mingw81_64''' -s build_type=Release -g cmake_paths -g=cmake -g qmake_paths -g=qmake -g deploy

cmd /k

I checked that the files and directories are correct and the only thing I sees that could cause a problem is "/" versus ""; howevr, I tried it both ways but still got the erro that the Profile was not found.

SGaist

What if you use backslashes for the path to the profile ?

ofmrew

@SGaist It was that and the three quotes. The following worked:

cd c:\Qt\Conan3D
conan.exe install qt3d/6.0.1@qt/final --build=missing --profile=C:\Qt\Tools\Conan\profiles\qt-6.0.2-mingw81_64 -s build_type=Release -g cmake_paths -g=cmake -g qmake_paths -g=qmake -g deploy
cmd /k
But I got this error:
CMake Error at CMakeLists.txt:3 (cmake_minimum_required):
CMake 3.15.0 or higher is required. You are running version 3.10.1
How do I get a version of cmake that will work with conan on Win 10.

SGaist

IIRC, you have the option to get it from the MaintenanceTool.

ofmrew

@ofmrew I looked at Qt\Tools and there is a CMake_64. Should this have been used?

ofmrew

@SGaist I do not see CMake as something that can be installed, unless I am looking in the wrong place. Any help would be appreciated.

SGaist

There's a separate entry in the Maintenance Tool to select Conan as well. You should found it there.

How did you install the current version you have ?

ofmrew

@ofmrew I got CMake installed, but now I get:
Microsoft Windows [Version 10.0.19041.804]
(c) 2020 Microsoft Corporation. All rights reserved.

C:\Users\rwill>cd c:\Qt\Conan3D
The system cannot find the path specified.

C:\Users\rwill>
C:\Users\rwill>conan.exe install qt3d/6.0.1@qt/final --build=missing --profile=C:\Qt\Tools\Conan\profiles\qt-6.0.2-mingw81_64 -s build_type=Release -g cmake_paths -g=cmake -g qmake_paths -g=qmake -g deploy
Configuration:
[settings]
arch=x86_64
arch_build=x86_64
build_type=Release
compiler=gcc
compiler.libcxx=libstdc++11
compiler.version=5
os=Windows
os_build=Windows
[options]
qt6=6.0.2
[build_requires]
[env]
CC=gcc
CXX=g++
QT_PATH=C:\Qt\6.0.2/mingw81_64
qt3d/6.0.1@qt/final: WARN: Package binary is corrupted, removing: 0f29c7292f66ab3b189fa2809bdfcf230d253f0f
Installing package: qt3d/6.0.1@qt/final
Requirements
qt3d/6.0.1@qt/final from local cache - Cache
Packages
qt3d/6.0.1@qt/final:0f29c7292f66ab3b189fa2809bdfcf230d253f0f - Build

Installing (downloading, building) binaries...
qt3d/6.0.1@qt/final: WARN: Build folder is dirty, removing it: C:\Users\rwill.conan\data\qt3d\6.0.1\qt\final\build\0f29c7292f66ab3b189fa2809bdfcf230d253f0f
qt3d/6.0.1@qt/final: Copying sources to build folder
qt3d/6.0.1@qt/final: Building your package in C:\Users\rwill.conan\data\qt3d\6.0.1\qt\final\build\0f29c7292f66ab3b189fa2809bdfcf230d253f0f
qt3d/6.0.1@qt/final: Generator txt created conanbuildinfo.txt
qt3d/6.0.1@qt/final: Calling build()
CMAKE_PREFIX_PATH for 'qt3d/6.0.1' build is: C:\Qt\6.0.2/mingw81_64
CMAKE_PREFIX_PATH for 'qt3d/6.0.1' build is: C:\Qt\6.0.2/mingw81_64
CMake Error: CMake was unable to find a build program corresponding to "MinGW Makefiles". CMAKE_MAKE_PROGRAM is not set. You probably need to select a different build tool.
CMake Error: CMake was unable to find a build program corresponding to "MinGW Makefiles". CMAKE_MAKE_PROGRAM is not set. You probably need to select a different build tool.
CMake Error: CMAKE_CXX_COMPILER not set, after EnableLanguage
CMake Error: CMAKE_C_COMPILER not set, after EnableLanguage
-- Configuring incomplete, errors occurred!
qt3d/6.0.1@qt/final:
qt3d/6.0.1@qt/final: ERROR: Package '0f29c7292f66ab3b189fa2809bdfcf230d253f0f' build failed
qt3d/6.0.1@qt/final: WARN: Build folder C:\Users\rwill.conan\data\qt3d\6.0.1\qt\final\build\0f29c7292f66ab3b189fa2809bdfcf230d253f0f
ERROR: qt3d/6.0.1@qt/final: Error in build() method, line 120
self.run('%s "%s" %s' % (self._get_qtcmake(), self.source_folder, cmake.command_line))
ConanException: Error 1 while executing C:\Qt\6.0.2\mingw81_64\bin\qt-cmake.bat "C:\Users\rwill.conan\data\qt3d\6.0.1\qt\final\build\0f29c7292f66ab3b189fa2809bdfcf230d253f0f" -G "MinGW Makefiles" -DCMAKE_BUILD_TYPE="Release" -DCONAN_IN_LOCAL_CACHE="ON" -DCONAN_COMPILER="gcc" -DCONAN_COMPILER_VERSION="5" -DCONAN_CXX_FLAGS="-m64" -DCONAN_SHARED_LINKER_FLAGS="-m64" -DCONAN_C_FLAGS="-m64" -DCONAN_LIBCXX="libstdc++11" -DBUILD_SHARED_LIBS="OFF" -DCMAKE_INSTALL_PREFIX="C:\Users\rwill.conan\data\qt3d\6.0.1\qt\final\build\0f29c7292f66ab3b189fa2809bdfcf230d253f0f_install_tmp" -DCMAKE_INSTALL_BINDIR="bin" -DCMAKE_INSTALL_SBINDIR="bin" -DCMAKE_INSTALL_LIBEXECDIR="bin" -DCMAKE_INSTALL_LIBDIR="lib" -DCMAKE_INSTALL_INCLUDEDIR="include" -DCMAKE_INSTALL_OLDINCLUDEDIR="include" -DCMAKE_INSTALL_DATAROOTDIR="share" -DCMAKE_EXPORT_NO_PACKAGE_REGISTRY="ON" -DCONAN_EXPORTED="1" -DCMAKE_VERBOSE_MAKEFILE="ON" -Wno-dev

Any Ideas?

SGaist

AFAIK, it should target Ninja.

ofmrew

@SGaist I am not sure I understand. What should tartget Ninja.

And what about the message:
qt3d/6.0.1@qt/final: WARN: Package binary is corrupted, removing: 0f29c7292f66ab3b189fa2809bdfcf230d253f0f

I checked and the path to ninja is in PATH.

What do I need to do?

ofmrew

@ofmrew Another question, does the message:
CMAKE_PREFIX_PATH for 'qt3d/6.0.1' build is: C:\Qt\6.0.2/mingw81_64
CMake Error: CMake was unable to find a build program corresponding to "MinGW Makefiles". CMAKE_MAKE_PROGRAM is not set. You probably need to select a different build tool.
CMake Error: CMake was unable to find a build program corresponding to "MinGW Makefiles". CMAKE_MAKE_PROGRAM is not set. You probably need to select a different build tool.
CMake Error: CMAKE_CXX_COMPILER not set, after EnableLanguage
CMake Error: CMAKE_C_COMPILER not set, after EnableLanguage
indicate a problem with the CMake installation and if so how can I check it?

SGaist

Did you open a command prompt pre-configured for MinGW ?

ofmrew

@SGaist I have heard that, but I well look it up.

ofmrew

@ofmrew I have two questions:

In the post "Qt3D 6.0.2 on Windows using MinGW 8.1.0" I note that all of the files use "/". So am I to assume that conan will make the conversion?
In that same post it was stated "More specifically I opened the appropriate Qt MinGW 8.1.0 command prompt" and executed "conan.exe . . .". Is it absolutely necessary to do that step and if so why is it not noted?

I hope that the documentation writers will look at all of the post being made about the troubles we are having with conan.

ofmrew

@ofmrew I am trying setup Command Prompt for

ofmrew

@ofmrew Sorry but the previous post was sent prematurly. It shoyuuld have said the I was setting Command Prompt for ming81_64 by adding c:\Qt\6.0.2\ming81_64 to PATH, but g++ --version is not recognized. What am I doing wrong?

SGaist

IIRC, Qt provides a set of shortcut for command prompts preconfigured for use. You should use these.

As for your PATH changes, did you check where exactly g++ is located ?

ofmrew

@SGaist I am learning more than I never wanted to know about Linux and Win 10. Back in 1990 when I was at the announcement of Win NT I would have loved this stuff, but now I just want to program 3D graphics.

I searched for g++ and did not find it, but I did find a number of g++ prefixed by a compiler.
Does the Installer actually install mingw or just a module, i.e., do I need to install mingw64 on my computer. One post in stackoverflow "https://stackoverflow.com/questions/22873884/how-do-i-run-configure-with-mingw" states that both mingw and msys must be installed. I that correct? If so, then do I follow the steps that post suggest?

SGaist

You do not need to install MinGW independently. The online installer as well as the Maintenance Tool gives you the option to install the version used for the pre-built binaries.

ofmrew

@SGaist What about Msys does that need to be installed?