App for bluetooth scanning

[AndreaFurlani]

@SGaist Thank you very much. I'll try to read it and make some tries.

[AndreaFurlani]

Hello again, I returned Here since I'm still stuck. In this moment I'm trying to create a new bluetooth service (in the box code), where I'll ask for creating an retrieve a list of all connected devices (and I still have not idea on how to do it, I saw this in the documentation, maybe could be useful).
So in this way I can create another service (on the app code) where once retrieved the list will associate to a device a command (and again I still have not idea on how to do it) and send it back to the box to execute it.
Any idea on how I can do it?
Thank you again for all the help.

[SGaist]

Something is not clear, what will run on that box ?

[Anonymous_Banned275]

@AndreaFurlani I would suggest to take a look at examples. Start with "qtconnectivity" - btscanner.
It does the basics - scans for nearby bluetooth devices etc.
However it is scarcely documented - in code - and assumes some knowledge about bluetooth.
From my experience - do not assume that your "local bluetooth device " is enabled to be used to scan for "remote bluetooth devices".
I have two with different dongles with different "class of service" and the scan results are NOT the same.

Same for "remote bluetooth device" - my powered "remote device " with serial USB to bluetooth adapter" can be "found" , my powered remote "boom box" has to be activated to be found.
Beware of running active operating system "bluetooth manager" software - it actually over-rides , takes precedence, of SOME of your code.

[AndreaFurlani]

@SGaist The box is connected to some lights and sensors via zigbee or bluetooth. I need a list of all the connected devices to the box

[AndreaFurlani]

@AnneRanch thank you for the answer. I already watched all the bluetooth examples in Qt creator but no one of them is useful to understand how to create a new service and in particular how to do the things I need.

[Anonymous_Banned275]

@AndreaFurlani said in App for bluetooth scanning:

how to create a new service

Since bluetooth devices have "class of service" be careful using the term.
I am still unclear about your overall task . I think I asked for simple hardware picture before .
Let me make analogy with my project
local bt device (PC) -> bluetooth media communication path -> remote bt device (radio )

one on my "services" would be - set the radio frequency

so "my box - radio " would turn on correct frequency and display it on build-in LCD

Are you attempting to do similar tasks via your box ?

[SGaist]

@AndreaFurlani said in App for bluetooth scanning:

@SGaist The box is connected to some lights and sensors via zigbee or bluetooth. I need a list of all the connected devices to the box

Hence my question what software runs on that box ?

[AndreaFurlani]

Hello I'm back again. I made some progress in writing my code. Now the box starts the advertising without problem.
Here's the code:

void bluetoothDevice::start(bool debugMode, bool protocolDebug)
{
    //Personalized Service for connected bluetooth devices list

    static const QLatin1String serviceUuid("11223344-5566-7788-99aa-bbccddeeff00");
    //static const QLatin1String writeListUuid("11223344-5566-7788-99aa-bbccddeeff11");
    static const QLatin1String readListUuid("11223344-5566-7788-99aa-bbccddeeff11");

    // [Advertising Data]
        QLowEnergyAdvertisingData advertisingData;
        advertisingData.setDiscoverability(QLowEnergyAdvertisingData::DiscoverabilityGeneral);
        advertisingData.setIncludePowerLevel(true);
        advertisingData.setLocalName("BOX");
        advertisingData.setServices(QList<QBluetoothUuid>() << QBluetoothUuid(serviceUuid));

    // [Service Data]
        QLowEnergyCharacteristicData readList;

        readList.setUuid(QBluetoothUuid(readListUuid));
        readList.setProperties(QLowEnergyCharacteristic::Read);
        const QLowEnergyDescriptorData clientConfig(QBluetoothUuid::CharacteristicUserDescription,QByteArray(2, 0));
        readList.addDescriptor(clientConfig);


        //writeList.setUuid(QBluetoothUuid(writeListUuid));
        //writeList.setProperties(QLowEnergyCharacteristic::Write);


        QLowEnergyServiceData serviceData;
        serviceData.setType(QLowEnergyServiceData::ServiceTypePrimary);
        serviceData.setUuid(QBluetoothUuid(serviceUuid));
        serviceData.addCharacteristic(readList);
        //serviceData.addCharacteristic(writeList);


    // [Start Advertising]

        leController.reset(QLowEnergyController::createPeripheral());
        service_list.reset(leController->addService(serviceData));
        leController->startAdvertising(QLowEnergyAdvertisingParameters(), advertisingData,advertisingData);


    qCDebug(BLELog) << " Start BLE backend [...] ";

    ConnectionHandler connectionHandler;
    DeviceHandler m_deviceHandler;


    // TODO! Restore debug options.
    GenericDeviceIf::start(debugMode, protocolDebug);

    // Initialize reachable state to unreachable.
    DataModel::getInstance()->setDeviceCategoryReachable(_category, false);

    _endpoints = DataModel::getInstance() ->getEndpointsListByCategory(dataBaseClasses::ENDPOINT_CATEGORY_BLE);

    m_deviceHandler.setDevice(nullptr);
    qDeleteAll(devices);
    devices.clear();

    emit devicesChanged();

    qCDebug(BLELog) << "Scanning for devices...";

    discoveryAgent->start(QBluetoothDeviceDiscoveryAgent::LowEnergyMethod);

    emit scanningChanged();

    // [Retrieving the list of devices]

        characteristic = service_list->characteristic(QBluetoothUuid(readListUuid));

        for (const auto &e: _endpoints){
            L.append(QString(e->getMapping()).toUtf8());
        }

        if (L.empty())
            qCDebug(BLELog) << "No endpoints loaded in the list";

        for (const auto &list: L) {
            service_list -> writeCharacteristic(characteristic, list) ;
        }


}

In this way I am able to connect to the BOX using an external BLE scanner app on my phone and once connected I would like to see the content of "list".
With this code the problem is that I can see only the last MAC address in the list, how can I see the complete content?

[Habanvee]

I have been using Bluetooth LE Explorer.
But my Bluetooth is not turning on on windows 10 for 2 days any help.

Updated: Glad found the solution here for Bluetooth turning on issue.

[jsulm]

@Habanvee In what way is your question related to Qt?
You should rather ask in a Windows forum.

[melissa321]

I have been using BLE suite this app has a primary scanner view option that detects all the available devices using the Android operating system.