Qt5.15.2 configure for arm Debian 10
Solved
Mobile and Embedded
-
Hi,
i am trying to configure Qt for my STM32MP1 board running debian 10.
Here is what i did:Made new device file in /qtbase/mkspecs/devices/stm32mp/qmake.conf and add this:
include(../common/linux_device_pre.conf) include(../common/linux_device_post.conf) # modifications to g++.conf QMAKE_CC = /opt/gcc-arm-8.3-2019.03-x86_64-arm-linux-gnueabihf/bin/arm-linux-gnueabihf-gcc QMAKE_CXX = /opt/gcc-arm-8.3-2019.03-x86_64-arm-linux-gnueabihf/bin/arm-linux-gnueabihf-g++ QMAKE_LINK = /opt/gcc-arm-8.3-2019.03-x86_64-arm-linux-gnueabihf/bin/arm-linux-gnueabihf-g++ QMAKE_LINK_SHLIB = /opt/gcc-arm-8.3-2019.03-x86_64-arm-linux-gnueabihf/bin/arm-linux-gnueabihf-g++ # modifications to linux.conf QMAKE_AR = /opt/gcc-arm-8.3-2019.03-x86_64-arm-linux-gnueabihf/bin/arm-linux-gnueabihf-ar cqs QMAKE_OBJCOPY = /opt/gcc-arm-8.3-2019.03-x86_64-arm-linux-gnueabihf/bin/arm-linux-gnueabihf-objcopy QMAKE_NM = /opt/gcc-arm-8.3-2019.03-x86_64-arm-linux-gnueabihf/bin/arm-linux-gnueabihf-nm -P QMAKE_STRIP = /opt/gcc-arm-8.3-2019.03-x86_64-arm-linux-gnueabihf/bin/arm-linux-gnueabihf-strip #load(device_config) QT_QPA_DEFAULT_PLATFORM = eglfs QMAKE_CFLAGS += $${COMPILER_FLAGS} QMAKE_CXXFLAGS += $${COMPILER_FLAGS} QMAKE_CXXFLAGS_RELEASE += -O3 INCLUDEPATH += /home/debian/opt/gcc-arm-8.3-2019.03-x86_64_arm-linux-gnueabihf/arm-linux-gnueabihf/include/c++/ QMAKE_LIBS += -lrt -lpthread -ldl # Extra stuff (OpenGL, DirectFB, ...) QMAKE_INCDIR_EGL = /home/debian/work/ROOTFS_STM_QT/usr/include QMAKE_LIBDIR_EGL = /home/debian/work/ROOTFS_STM_QT/usr/lib/arm-linux-gnueabihf QMAKE_INCDIR_OPENGL_ES2 = $${QMAKE_INCDIR_EGL} QMAKE_LIBDIR_OPENGL_ES2 = $${QMAKE_LIBDIR_EGL} QMAKE_INCDIR_OPENVG = $${QMAKE_INCDIR_EGL} QMAKE_LIBDIR_OPENVG = $${QMAKE_LIBDIR_EGL} #QMAKE_LIBS_EGL = -lEGL -lIMGegl -lsrv_um QMAKE_LIBS_EGL = -lEGL QMAKE_LIBS_OPENGL_ES2 = -lGLESv2 $${QMAKE_LIBS_EGL} QMAKE_LIBS_OPENVG = -lOpenVG $${QMAKE_LIBS_EGL} DISTRO_OPTS += hard-float # No need for any special EGL device integration. # Prioritize the default, compiled-in integration over any plugins. EGLFS_DEVICE_INTEGRATION = none load(qt_config)Than i did this:
./configure -v -opengl es2 -device stm32mp -device-option CROSS_COMPILE=~/opt/gcc-arm-8.3-2019.03-x86_64-arm-linux-gnueabihf/bin/arm-linux-gnueabihf- -sysroot /home/debian/work/ROOTFS_STM_QT -opensource -confirm-license -optimized-qmake -reduce-exports -release -make libs -make tools -prefix /usr/local/qt5stm32mp -hostprefix /usr/local/qt5stm32mpAnd i got this as output:
Configure summary: Building on: linux-g++ (x86_64, CPU features: mmx sse sse2) Building for: devices/stm32mp1 (x86_64, CPU features: mmx sse sse2) Target compiler: gcc 8.3.0 Configuration: cross_compile sse2 aesni sse3 ssse3 sse4_1 sse4_2 avx avx2 avx512f avx512bw avx512cd avx512dq avx512er avx512ifma avx512pf avx512vbmi avx512vl compile_examples enable_new_dtags f16c largefile precompile_header rdrnd rdseed shani x86SimdAlways shared shared rpath release c++11 c++14 c++17 c++1z concurrent dbus no-pkg-config reduce_exports reduce_relocations release_tools stl Build options: Mode ................................... release; optimized tools Optimize release build for size ........ no Building shared libraries .............. yes Using C standard ....................... C11 Using C++ standard ..................... C++17 Using ccache ........................... no Using new DTAGS ........................ yes Relocatable ............................ yes Using precompiled headers .............. yes Using LTCG ............................. no Target compiler supports: SSE .................................. SSE2 SSE3 SSSE3 SSE4.1 SSE4.2 AVX .................................. AVX AVX2 AVX512 ............................... F ER CD PF DQ BW VL IFMA VBMI Other x86 ............................ AES F16C RDRAND SHA Intrinsics without -mXXX option ...... yes Build parts ............................ libs tools Qt modules and options: Qt Concurrent .......................... yes Qt D-Bus ............................... yes Qt D-Bus directly linked to libdbus .... no Qt Gui ................................. yes Qt Network ............................. yes Qt Sql ................................. yes Qt Testlib ............................. yes Qt Widgets ............................. yes Qt Xml ................................. yes Support enabled for: Using pkg-config ....................... no udev ................................... no Using system zlib ...................... no Zstandard support ...................... yes Qt Core: DoubleConversion ....................... yes Using system DoubleConversion ........ no GLib ................................... no iconv .................................. yes ICU .................................... no Built-in copy of the MIME database ..... yes Tracing backend ........................ <none> Logging backends: journald ............................. no syslog ............................... no slog2 ................................ no PCRE2 .................................. yes Using system PCRE2 ................... no Qt Network: getifaddrs() ........................... yes IPv6 ifname ............................ yes libproxy ............................... no Linux AF_NETLINK ....................... yes OpenSSL ................................ no Qt directly linked to OpenSSL ........ no OpenSSL 1.1 ............................ no DTLS ................................... no OCSP-stapling .......................... no SCTP ................................... no Use system proxies ..................... yes GSSAPI ................................. yes Qt Gui: Accessibility .......................... yes FreeType ............................... yes Using system FreeType ................ no HarfBuzz ............................... yes Using system HarfBuzz ................ no Fontconfig ............................. no Image formats: GIF .................................. yes ICO .................................. yes JPEG ................................. yes Using system libjpeg ............... no PNG .................................. yes Using system libpng ................ no Text formats: HtmlParser ........................... yes CssParser ............................ yes OdfWriter ............................ yes MarkdownReader ....................... yes Using system libmd4c ............... no MarkdownWriter ....................... yes EGL .................................... yes OpenVG ................................. no OpenGL: Desktop OpenGL ....................... no OpenGL ES 2.0 ........................ yes OpenGL ES 3.0 ........................ yes OpenGL ES 3.1 ........................ yes OpenGL ES 3.2 ........................ yes Vulkan ................................. no Session Management ..................... yes Features used by QPA backends: evdev .................................. yes libinput ............................... no INTEGRITY HID .......................... no mtdev .................................. no tslib .................................. no xkbcommon .............................. no X11 specific: XLib ................................. yes XCB Xlib ............................. yes EGL on X11 ........................... yes xkbcommon-x11 ........................ no QPA backends: DirectFB ............................... no EGLFS .................................. yes EGLFS details: EGLFS OpenWFD ........................ no EGLFS i.Mx6 .......................... yes EGLFS i.Mx6 Wayland .................. no EGLFS RCAR ........................... no EGLFS EGLDevice ...................... yes EGLFS GBM ............................ no EGLFS VSP2 ........................... no EGLFS Mali ........................... yes EGLFS Raspberry Pi ................... no EGLFS X11 ............................ yes LinuxFB ................................ yes VNC .................................... yes Qt Sql: SQL item models ........................ yes Qt Widgets: GTK+ ................................... no Styles ................................. Fusion Windows Qt PrintSupport: CUPS ................................... no Qt Sql Drivers: DB2 (IBM) .............................. no InterBase .............................. no MySql .................................. no OCI (Oracle) ........................... no ODBC ................................... no PostgreSQL ............................. no SQLite2 ................................ no SQLite ................................. yes Using system provided SQLite ......... no TDS (Sybase) ........................... yes Qt Testlib: Tester for item models ................. yes Serial Port: ntddmodm ............................... yes Qt SerialBus: Socket CAN ............................. yes Socket CAN FD .......................... yes SerialPort Support ..................... yes Further Image Formats: JasPer ................................. no MNG .................................... no TIFF ................................... yes Using system libtiff ................. no WEBP ................................... yes Using system libwebp ................. no Qt QML: QML network support .................... yes QML debugging and profiling support .... yes QML just-in-time compiler .............. yes QML sequence object .................... yes QML XML http request ................... yes QML Locale ............................. yes Qt QML Models: QML list model ......................... yes QML delegate model ..................... yes Qt Quick: Direct3D 12 ............................ yes AnimatedImage item ..................... yes Canvas item ............................ yes Support for Qt Quick Designer .......... yes Flipable item .......................... yes GridView item .......................... yes ListView item .......................... yes TableView item ......................... yes Path support ........................... yes PathView item .......................... yes Positioner items ....................... yes Repeater item .......................... yes ShaderEffect item ...................... yes Sprite item ............................ yes QtQuick3D: Assimp ................................. yes System Assimp .......................... yes Qt Scxml: ECMAScript data model for QtScxml ...... yes Qt Gamepad: SDL2 ................................... yes Qt 3D: Assimp ................................. yes System Assimp .......................... yes Output Qt3D GL traces .................. no Use SSE2 instructions .................. yes Use AVX2 instructions .................. no Aspects: Render aspect ........................ yes Input aspect ......................... yes Logic aspect ......................... yes Animation aspect ..................... yes Extras aspect ........................ yes Qt 3D Renderers: OpenGL Renderer ........................ yes RHI Renderer ........................... no Qt 3D GeometryLoaders: Autodesk FBX ........................... yes Qt Wayland Client ........................ no Qt Wayland Compositor .................... no Qt Bluetooth: BlueZ .................................. yes BlueZ Low Energy ....................... yes Linux Crypto API ....................... yes Native Win32 Bluetooth ................. no WinRT Bluetooth API (desktop & UWP) .... no WinRT advanced bluetooth low energy API (desktop & UWP) . no Qt Sensors: sensorfw ............................... no Qt Quick Controls 2: Styles ................................. Default Fusion Imagine Material Universal Qt Quick Templates 2: Hover support .......................... yes Multi-touch support .................... yes Qt Positioning: Gypsy GPS Daemon ....................... no WinRT Geolocation API .................. yes Qt Location: Qt.labs.location experimental QML plugin . yes Geoservice plugins: OpenStreetMap ........................ yes HERE ................................. yes Esri ................................. yes Mapbox ............................... yes MapboxGL ............................. yes Itemsoverlay ......................... yes QtXmlPatterns: XML schema support ..................... yes Qt Multimedia: ALSA ................................... yes GStreamer 1.0 .......................... no GStreamer 0.10 ......................... no Video for Linux ........................ yes OpenAL ................................. yes PulseAudio ............................. no Resource Policy (libresourceqt5) ....... no Windows Audio Services ................. no DirectShow ............................. no Windows Media Foundation ............... no Qt TextToSpeech: Flite .................................. yes Flite with ALSA ........................ yes Speech Dispatcher ...................... yes Qt Tools: Qt Assistant ........................... yes Qt Designer ............................ yes Qt Distance Field Generator ............ yes kmap2qmap .............................. yes Qt Linguist ............................ yes Mac Deployment Tool .................... no makeqpf ................................ yes pixeltool .............................. yes qdbus .................................. yes qev .................................... yes Qt Attributions Scanner ................ yes qtdiag ................................. yes qtpaths ................................ yes qtplugininfo ........................... yes Windows deployment tool ................ no WinRT Runner Tool ...................... no Qt Tools: QDoc ................................... no Qt WebEngine Build Tools: Use System Ninja ....................... no Use System Gn .......................... no Jumbo Build Merge Limit ................ 8 Developer build ........................ no Sanitizer .............................. no QtWebEngine required system libraries: fontconfig ........................... no dbus ................................. no nss .................................. no khr .................................. yes glibc ................................ yes Optional system libraries used: re2 .................................. no icu .................................. no libwebp, libwebpmux and libwebpdemux . no opus ................................. no ffmpeg ............................... no libvpx ............................... no snappy ............................... no glib ................................. no zlib ................................. no minizip .............................. no libevent ............................. no jsoncpp .............................. no protobuf ............................. no libxml2 and libxslt .................. no lcms2 ................................ no png .................................. no JPEG ................................. no harfbuzz ............................. no freetype ............................. no Note: Also available for Linux: linux-clang linux-icc Note: -optimized-tools is not useful in -release mode. Note: The following modules are not being compiled in this configuration: webenginecore webengine webenginewidgets pdf pdfwidgets WARNING: QDoc will not be compiled, probably because libclang could not be located. This means that you cannot build the Qt documentation. Either ensure that llvm-config is in your PATH environment variable, or set LLVM_INSTALL_DIR to the location of your llvm installation. On Linux systems, you may be able to install libclang by installing the libclang-dev or libclang-devel package, depending on your distribution. On macOS, you can use Homebrew's llvm package. On Windows, you must set LLVM_INSTALL_DIR to the installation path. WARNING: A pkg-config support is required to build QtWebEngine. WARNING: A pkg-config support is required to build QtPdf. WARNING: QtWebEngine will not be built. WARNING: QtPdf will not be built. Qt is now configured for building. Just run 'make'. Once everything is built, you must run 'make install'. Qt will be installed into '/home/debian/work/ROOTFS_STM_QT/usr/local/qt5stm32mp'.So i did
makeAnd got this:
cd qtbase/ && ( test -e Makefile || /home/debian/work/qt-everywhere-src-5.15.2/qtbase/bin/qmake -o Makefile /home/debian/work/qt-everywhere-src-5.15.2/qtbase/qtbase.pro ) && make -f Makefile make[1]: Entering directory '/home/debian/work/qt-everywhere-src-5.15.2/qtbase' cd src/ && ( test -e Makefile || /home/debian/work/qt-everywhere-src-5.15.2/qtbase/bin/qmake -o Makefile /home/debian/work/qt-everywhere-src-5.15.2/qtbase/src/src.pro ) && make -f Makefile make[2]: Entering directory '/home/debian/work/qt-everywhere-src-5.15.2/qtbase/src' cd corelib/ && ( test -e Makefile.qtzlib || /home/debian/work/qt-everywhere-src-5.15.2/qtbase/bin/qmake -o Makefile.qtzlib /home/debian/work/qt-everywhere-src-5.15.2/qtbase/src/corelib/qtzlib.pro ) && make -f Makefile.qtzlib make[3]: Entering directory '/home/debian/work/qt-everywhere-src-5.15.2/qtbase/src/corelib' make[3]: Nothing to be done for 'first'. make[3]: Leaving directory '/home/debian/work/qt-everywhere-src-5.15.2/qtbase/src/corelib' cd tools/bootstrap/ && ( test -e Makefile || /home/debian/work/qt-everywhere-src-5.15.2/qtbase/bin/qmake -o Makefile /home/debian/work/qt-everywhere-src-5.15.2/qtbase/src/tools/bootstrap/bootstrap.pro ) && make -f Makefile make[3]: Entering directory '/home/debian/work/qt-everywhere-src-5.15.2/qtbase/src/tools/bootstrap' make[3]: Nothing to be done for 'first'. make[3]: Leaving directory '/home/debian/work/qt-everywhere-src-5.15.2/qtbase/src/tools/bootstrap' cd tools/moc/ && ( test -e Makefile || /home/debian/work/qt-everywhere-src-5.15.2/qtbase/bin/qmake -o Makefile /home/debian/work/qt-everywhere-src-5.15.2/qtbase/src/tools/moc/moc.pro ) && make -f Makefile make[3]: Entering directory '/home/debian/work/qt-everywhere-src-5.15.2/qtbase/src/tools/moc' make[3]: Nothing to be done for 'first'. make[3]: Leaving directory '/home/debian/work/qt-everywhere-src-5.15.2/qtbase/src/tools/moc' cd tools/rcc/ && ( test -e Makefile || /home/debian/work/qt-everywhere-src-5.15.2/qtbase/bin/qmake -o Makefile /home/debian/work/qt-everywhere-src-5.15.2/qtbase/src/tools/rcc/rcc.pro ) && make -f Makefile make[3]: Entering directory '/home/debian/work/qt-everywhere-src-5.15.2/qtbase/src/tools/rcc' make[3]: Nothing to be done for 'first'. make[3]: Leaving directory '/home/debian/work/qt-everywhere-src-5.15.2/qtbase/src/tools/rcc' cd tools/tracegen/ && ( test -e Makefile || /home/debian/work/qt-everywhere-src-5.15.2/qtbase/bin/qmake -o Makefile /home/debian/work/qt-everywhere-src-5.15.2/qtbase/src/tools/tracegen/tracegen.pro ) && make -f Makefile make[3]: Entering directory '/home/debian/work/qt-everywhere-src-5.15.2/qtbase/src/tools/tracegen' make[3]: Nothing to be done for 'first'. make[3]: Leaving directory '/home/debian/work/qt-everywhere-src-5.15.2/qtbase/src/tools/tracegen' cd 3rdparty/pcre2/ && ( test -e Makefile || /home/debian/work/qt-everywhere-src-5.15.2/qtbase/bin/qmake -o Makefile /home/debian/work/qt-everywhere-src-5.15.2/qtbase/src/3rdparty/pcre2/pcre2.pro ) && make -f Makefile make[3]: Entering directory '/home/debian/work/qt-everywhere-src-5.15.2/qtbase/src/3rdparty/pcre2' /opt/gcc-arm-8.3-2019.03-x86_64-arm-linux-gnueabihf/bin/arm-linux-gnueabihf-gcc -c -pipe --sysroot=/home/debian/work/ROOTFS_STM_QT -mshstk -O2 -fPIC -std=gnu11 -fvisibility=hidden -w -fno-exceptions -DQT_NO_LINKED_LIST -DQT_NO_JAVA_STYLE_ITERATORS -DPCRE2_CODE_UNIT_WIDTH=16 -DQT_NO_NARROWING_CONVERSIONS_IN_CONNECT -DHAVE_CONFIG_H -DQT_NO_DYNAMIC_CAST -DQT_NO_EXCEPTIONS -D_LARGEFILE64_SOURCE -D_LARGEFILE_SOURCE -I. -I/home/debian/opt/gcc-arm-8.3-2019.03-x86_64_arm-linux-gnueabihf/arm-linux-gnueabihf/include/c++/ -Isrc -I../../../mkspecs/devices/stm32mp1 -o .obj/pcre2_auto_possess.o src/pcre2_auto_possess.c arm-linux-gnueabihf-gcc: error: unrecognized command line option ‘-mshstk’ make[3]: *** [Makefile:1361: .obj/pcre2_auto_possess.o] Error 1 make[3]: Leaving directory '/home/debian/work/qt-everywhere-src-5.15.2/qtbase/src/3rdparty/pcre2' make[2]: *** [Makefile:201: sub-3rdparty-pcre2-make_first] Error 2 make[2]: Leaving directory '/home/debian/work/qt-everywhere-src-5.15.2/qtbase/src' make[1]: *** [Makefile:51: sub-src-make_first] Error 2 make[1]: Leaving directory '/home/debian/work/qt-everywhere-src-5.15.2/qtbase' make: *** [Makefile:88: module-qtbase-make_first] Error 2So the error that i am facing is that my gcc-arm compiler doesnt have this command line:
arm-linux-gnueabihf-gcc: error: unrecognized command line option ‘-mshstk’Any idea?
-
@michaelL said in Qt5.15.2 configure for arm Debian 10:
arm-linux-gnueabihf-gcc
I am not an expert on Cross compiling , But most likely you should use "arm-linux-gnueabihf-gcc" which supports (or has flag ) "-mshstk" . I did a quick check on my machine with "man man arm-linux-gnueabihf-gcc" and found out it has "-mshstk"
arm-linux-gnueabihf-gcc --version arm-linux-gnueabihf-gcc (Ubuntu 9.3.0-17ubuntu1~20.04) 9.3.0 man arm-linux-gnueabihf-gcc : x86 Options -mtune=cpu-type -march=cpu-type -mtune-ctrl=feature-list -mdump-tune-features -mno-default -mfpmath=unit -masm=dialect -mno-fancy-math-387 -mno-fp-ret-in-387 -m80387 -mhard-float -msoft-float -mno-wide-multiply -mrtd -malign-double -mpreferred-stack-boundary=num -mincoming-stack-boundary=num -mcld -mcx16 -msahf -mmovbe -mcrc32 -mrecip -mrecip=opt -mvzeroupper -mprefer-avx128 -mprefer-vector-width=opt -mmmx -msse -msse2 -msse3 -mssse3 -msse4.1 -msse4.2 -msse4 -mavx -mavx2 -mavx512f -mavx512pf -mavx512er -mavx512cd -mavx512vl -mavx512bw -mavx512dq -mavx512ifma -mavx512vbmi -msha -maes -mpclmul -mfsgsbase -mrdrnd -mf16c -mfma -mpconfig -mwbnoinvd -mptwrite -mprefetchwt1 -mclflushopt -mclwb -mxsavec -mxsaves -msse4a -m3dnow -m3dnowa -mpopcnt -mabm -mbmi -mtbm -mfma4 -mxop -madx -mlzcnt -mbmi2 -mfxsr -mxsave -mxsaveopt -mrtm -mhle -mlwp -mmwaitx -mclzero -mpku -mthreads -mgfni -mvaes -mwaitpkg -mshstk -
@guruhb said in Qt5.15.2 configure for arm Debian 10:
mshstk
Hi Guruhb,
thank you for your answer. I think the option "-mshstk" is only used in 0x86 architectures.
I downloaded the arm-gnueabihf-gcc version 10.2 which i think it is the latest and there is no option "-mshstk" as well:
Here is my compiler version:
debian@debian10:~/work$ gcc-arm-10.2-2020.11-x86_64-arm-none-linux-gnueabihf/bin/arm-none-linux-gnueabihf-gcc -v Using built-in specs. COLLECT_GCC=gcc-arm-10.2-2020.11-x86_64-arm-none-linux-gnueabihf/bin/arm-none-linux-gnueabihf-gcc COLLECT_LTO_WRAPPER=/home/debian/work/gcc-arm-10.2-2020.11-x86_64-arm-none-linux-gnueabihf/bin/../libexec/gcc/arm-none-linux-gnueabihf/10.2.1/lto-wrapper Target: arm-none-linux-gnueabihf Configured with: /tmp/dgboter/bbs/build03--cen7x86_64/buildbot/cen7x86_64--arm-none-linux-gnueabihf/build/src/gcc/configure --target=arm-none-linux-gnueabihf --prefix= --with-sysroot=/arm-none-linux-gnueabihf/libc --with-build-sysroot=/tmp/dgboter/bbs/build03--cen7x86_64/buildbot/cen7x86_64--arm-none-linux-gnueabihf/build/build-arm-none-linux-gnueabihf/install//arm-none-linux-gnueabihf/libc --with-bugurl=https://bugs.linaro.org/ --enable-gnu-indirect-function --enable-shared --disable-libssp --disable-libmudflap --enable-checking=release --enable-languages=c,c++,fortran --with-gmp=/tmp/dgboter/bbs/build03--cen7x86_64/buildbot/cen7x86_64--arm-none-linux-gnueabihf/build/build-arm-none-linux-gnueabihf/host-tools --with-mpfr=/tmp/dgboter/bbs/build03--cen7x86_64/buildbot/cen7x86_64--arm-none-linux-gnueabihf/build/build-arm-none-linux-gnueabihf/host-tools --with-mpc=/tmp/dgboter/bbs/build03--cen7x86_64/buildbot/cen7x86_64--arm-none-linux-gnueabihf/build/build-arm-none-linux-gnueabihf/host-tools --with-isl=/tmp/dgboter/bbs/build03--cen7x86_64/buildbot/cen7x86_64--arm-none-linux-gnueabihf/build/build-arm-none-linux-gnueabihf/host-tools --with-arch=armv7-a --with-fpu=neon --with-float=hard --with-mode=thumb --with-arch=armv7-a --with-pkgversion='GNU Toolchain for the A-profile Architecture 10.2-2020.11 (arm-10.16)' Thread model: posix Supported LTO compression algorithms: zlib gcc version 10.2.1 20201103 (GNU Toolchain for the A-profile Architecture 10.2-2020.11 (arm-10.16))Here is the no option "-mshstk"
debian@debian10:~/work$ gcc-arm-10.2-2020.11-x86_64-arm-none-linux-gnueabihf/bin/arm-none-linux-gnueabihf-gcc -Q --help=target The following options are target specific: -mabi= aapcs-linux -mabort-on-noreturn [disabled] -mandroid [disabled] -mapcs [disabled] -mapcs-frame [disabled] -mapcs-reentrant [disabled] -mapcs-stack-check [disabled] -march= armv7-a+simd -marm [disabled] -masm-syntax-unified [disabled] -mbe32 [enabled] -mbe8 [disabled] -mbig-endian [disabled] -mbionic [disabled] -mbranch-cost= -1 -mcallee-super-interworking [disabled] -mcaller-super-interworking [disabled] -mcmse [disabled] -mcpu= -mfdpic [disabled] -mfix-cortex-m3-ldrd [enabled] -mflip-thumb [disabled] -mfloat-abi= hard -mfp16-format= none -mfpu= neon -mgeneral-regs-only [disabled] -mglibc [enabled] -mhard-float -mfloat-abi=hard -mlittle-endian [enabled] -mlong-calls [disabled] -mmusl [disabled] -mneon-for-64bits [disabled] -mpic-data-is-text-relative [enabled] -mpic-register= -mpoke-function-name [disabled] -mprint-tune-info [disabled] -mpure-code [disabled] -mrestrict-it [enabled] -msched-prolog [enabled] -msingle-pic-base [disabled] -mslow-flash-data [disabled] -msoft-float -mfloat-abi=soft -mstructure-size-boundary= 32 -mthumb [enabled] -mthumb-interwork [enabled] -mtls-dialect= gnu -mtp= auto -mtpcs-frame [disabled] -mtpcs-leaf-frame [disabled] -mtune= -muclibc [disabled] -munaligned-access [enabled] -mvectorize-with-neon-double [disabled] -mvectorize-with-neon-quad [enabled] -mword-relocations [disabled]If i run my 0x86 gcc i can see the option "-mshstk" disabled:
debian@debian10:~/work$ gcc -Q --help=target The following options are target specific: -m128bit-long-double [enabled] -m16 [disabled] -m32 [disabled] -m3dnow [disabled] -m3dnowa [disabled] -m64 [enabled] -m80387 [enabled] -m8bit-idiv [disabled] -m96bit-long-double [disabled] -mabi= sysv -mabm [disabled] -maccumulate-outgoing-args [disabled] -maddress-mode= long -madx [disabled] -maes [disabled] -malign-data= compat -malign-double [disabled] -malign-functions= 0 -malign-jumps= 0 -malign-loops= 0 -malign-stringops [enabled] -mandroid [disabled] -march= x86-64 -masm= att -mavx [disabled] -mavx2 [disabled] -mavx256-split-unaligned-load [enabled] -mavx256-split-unaligned-store [enabled] -mavx5124fmaps [disabled] -mavx5124vnniw [disabled] -mavx512bitalg [disabled] -mavx512bw [disabled] -mavx512cd [disabled] -mavx512dq [disabled] -mavx512er [disabled] -mavx512f [disabled] -mavx512ifma [disabled] -mavx512pf [disabled] -mavx512vbmi [disabled] -mavx512vbmi2 [disabled] -mavx512vl [disabled] -mavx512vnni [disabled] -mavx512vpopcntdq [disabled] -mbionic [disabled] -mbmi [disabled] -mbmi2 [disabled] -mbranch-cost=<0,5> 3 -mcall-ms2sysv-xlogues [disabled] -mcet-switch [disabled] -mcld [disabled] -mclflushopt [disabled] -mclwb [disabled] -mclzero [disabled] -mcmodel= [default] -mcpu= -mcrc32 [disabled] -mcx16 [disabled] -mdispatch-scheduler [disabled] -mdump-tune-features [disabled] -mf16c [disabled] -mfancy-math-387 [enabled] -mfentry [disabled] -mfma [disabled] -mfma4 [disabled] -mforce-drap [disabled] -mforce-indirect-call [disabled] -mfp-ret-in-387 [enabled] -mfpmath= sse -mfsgsbase [disabled] -mfunction-return= keep -mfused-madd -mfxsr [enabled] -mgeneral-regs-only [disabled] -mgfni [disabled] -mglibc [enabled] -mhard-float [enabled] -mhle [disabled] -miamcu [disabled] -mieee-fp [enabled] -mincoming-stack-boundary= 0 -mindirect-branch-register [disabled] -mindirect-branch= keep -minline-all-stringops [disabled] -minline-stringops-dynamically [disabled] -mintel-syntax -mlarge-data-threshold=<number> 65536 -mlong-double-128 [disabled] -mlong-double-64 [disabled] -mlong-double-80 [enabled] -mlwp [disabled] -mlzcnt [disabled] -mmemcpy-strategy= -mmemset-strategy= -mmitigate-rop [disabled] -mmmx [enabled] -mmovbe [disabled] -mmovdir64b [disabled] -mmovdiri [disabled] -mmpx [disabled] -mms-bitfields [disabled] -mmusl [disabled] -mmwaitx [disabled] -mno-align-stringops [disabled] -mno-default [disabled] -mno-fancy-math-387 [disabled] -mno-push-args [disabled] -mno-red-zone [disabled] -mno-sse4 [enabled] -mnop-mcount [disabled] -momit-leaf-frame-pointer [disabled] -mpc32 [disabled] -mpc64 [disabled] -mpc80 [disabled] -mpclmul [disabled] -mpcommit [disabled] -mpconfig [disabled] -mpku [disabled] -mpopcnt [disabled] -mprefer-avx128 -mprefer-vector-width= none -mpreferred-stack-boundary= 0 -mprefetchwt1 [disabled] -mprfchw [disabled] -mpush-args [enabled] -mrdpid [disabled] -mrdrnd [disabled] -mrdseed [disabled] -mrecip [disabled] -mrecip= -mrecord-mcount [disabled] -mred-zone [enabled] -mregparm= 6 -mrtd [disabled] -mrtm [disabled] -msahf [disabled] -msgx [disabled] -msha [disabled] -mshstk [disabled] -mskip-rax-setup [disabled] -msoft-float [disabled] -msse [enabled] -msse2 [enabled] -msse2avx [disabled] -msse3 [disabled] -msse4 [disabled] -msse4.1 [disabled] -msse4.2 [disabled] -msse4a [disabled] -msse5 -msseregparm [disabled] -mssse3 [disabled] -mstack-arg-probe [disabled] -mstack-protector-guard-offset= -mstack-protector-guard-reg= -mstack-protector-guard-symbol= -mstack-protector-guard= tls -mstackrealign [disabled] -mstringop-strategy= [default] -mstv [enabled] -mtbm [disabled] -mtls-dialect= gnu -mtls-direct-seg-refs [enabled] -mtune-ctrl= -mtune= generic -muclibc [disabled] -mvaes [disabled] -mveclibabi= [default] -mvect8-ret-in-mem [disabled] -mvpclmulqdq [disabled] -mvzeroupper [enabled] -mwbnoinvd [disabled] -mx32 [disabled] -mxop [disabled] -mxsave [disabled] -mxsavec [disabled] -mxsaveopt [disabled] -mxsaves [disabled]So there is no option "-mshstk" for arm gcc than right? Is there anything missing maybe wrong settings on my device "qmake.conf" file?
