QT5 build: CC: No such file or directory

SGaist

The skip option is only for module names.

As for the Qt declarative issue... gcc 10 is supported on Linux so it does look a bit strange...

Michele31415

What name should I give configure -skip to exclude the requirement for libQt5SerialPort.so?
Oh wait a minute, I do have that library:

/opt/qt5/qt5-build/qtserialbus/lib $ ls
cmake                     libQt5SerialBus.so        libQt5SerialBus.so.5.8.0
libQt5SerialBus.la        libQt5SerialBus.so.5      pkgconfig
libQt5SerialBus.prl       libQt5SerialBus.so.5.8
/opt/qt5/qt5-build/qtserialbus/lib $

So why is it saying:

g++ -z defs -Wl,-R,/lib -shared -o libqttinycanbus.so .obj/main.o .obj/tinycanbackend.o .obj/moc_tinycanbackend.o  -L/usr/sfw/lib -L/opt/qt5/qt5-build/qtserialbus/lib -lQt5SerialBus -L/opt/qt5/qt5-build/qtbase/lib -lQt5Core -lpthread -lrt  
ld: warning: ld: warning: file libQt5SerialPort.so.5: required by /opt/qt5/qt5-build/qtserialbus/lib/libQt5SerialBus.so, not found
file libQt5SerialPort.so.5: required by /opt/qt5/qt5-build/qtserialbus/lib/libQt5SerialBus.so, not found
Undefined			first referenced
 symbol  			    in file
_ZN11QSerialPort9setParityENS_6ParityE /opt/qt5/qt5-build/qtserialbus/lib/libQt5SerialBus.so
Undefined			first referenced
 symbol  			    in file
_ZN11QSerialPort11setStopBitsENS_8StopBitsE /opt/qt5/qt5-build/qtserialbus/lib/libQt5SerialBus.so
_ZN11QSerialPort9setParityENS_6ParityE /opt/qt5/qt5-build/qtserialbus/lib/libQt5SerialBus.so
_ZN11QSerialPort5clearE6QFlagsINS_9DirectionEE /opt/qt5/qt5-build/qtserialbus/lib/libQt5SerialBus.so
_ZN11QSerialPort11setStopBitsENS_8StopBitsE /opt/qt5/qt5-build/qtserialbus/lib/libQt5SerialBus.so
_ZN11QSerialPort11setBaudRateEi6QFlagsINS_9DirectionEE _ZN11QSerialPort5clearE6QFlagsINS_9DirectionEE/opt/qt5/qt5-build/qtserialbus/lib/libQt5SerialBus.so
 /opt/qt5/qt5-build/qtserialbus/lib/libQt5SerialBus.so
_ZN11QSerialPortC1EP7QObject        /opt/qt5/qt5-build/qtserialbus/lib/libQt5SerialBus.so
_ZN11QSerialPort11setBaudRateEi6QFlagsINS_9DirectionEE /opt/qt5/qt5-build/qtserialbus/lib/libQt5SerialBus.so
_ZN11QSerialPort11setDataBitsENS_8DataBitsE /opt/qt5/qt5-build/qtserialbus/lib/libQt5SerialBus.so
_ZN11QSerialPortC1EP7QObject_ZN11QSerialPort5errorENS_15SerialPortErrorE /opt/qt5/qt5-build/qtserialbus/lib/libQt5SerialBus.so
       _ZN11QSerialPort16staticMetaObjectE /opt/qt5/qt5-build/qtserialbus/lib/libQt5SerialBus.so
 /opt/qt5/qt5-build/qtserialbus/lib/libQt5SerialBus.so
_ZN11QSerialPort11setPortNameERK7QString_ZN11QSerialPort11setDataBitsENS_8DataBitsE /opt/qt5/qt5-build/qtserialbus/lib/libQt5SerialBus.so
 _ZN11QSerialPort5errorENS_15SerialPortErrorE /opt/qt5/qt5-build/qtserialbus/lib/libQt5SerialBus.so
/opt/qt5/qt5-build/qtserialbus/lib/libQt5SerialBus.so_ZN11QSerialPort16staticMetaObjectE /opt/qt5/qt5-build/qtserialbus/lib/libQt5SerialBus.so

_ZN11QSerialPort11setPortNameERK7QStringld:  /opt/qt5/qt5-build/qtserialbus/lib/libQt5SerialBus.sofatal: symbol referencing errors

ld: fatal: symbol referencing errors

SGaist

"-skip qtserialbus" for example.

Looks like your machine goes too fast :-D

Try building the qtserialport module before qtserialbus

You can use "make -C qtserialport" and then go on with your build.

Michele31415

@SGaist That worked:

/opt/qt5/qt5-build $ gmake -C qtserialport
gmake: Entering directory '/opt/qt5/qt5-build/qtserialport'
cd src/ && ( test -e Makefile || /opt/qt5/qt5-build/qtbase/bin/qmake -o Makefile /opt/qt5/qtserialport/src/src.pro -qtconf /opt/qt5/qt5-build/qtbase/bin/qt.conf -- -opensource -nomake examples -nomake tests -platform solaris-g++ ) && gmake -f Makefile 
gmake[1]: Entering directory '/opt/qt5/qt5-build/qtserialport/src'
cd serialport/ && ( test -e Makefile || /opt/qt5/qt5-build/qtbase/bin/qmake -o Makefile /opt/qt5/qtserialport/src/serialport/serialport.pro -qtconf /opt/qt5/qt5-build/qtbase/bin/qt.conf -- -opensource -nomake examples -nomake tests -platform solaris-g++ ) && gmake -f Makefile 
gmake[2]: Entering directory '/opt/qt5/qt5-build/qtserialport/src/serialport'
gmake[2]: Nothing to be done for 'first'.
gmake[2]: Leaving directory '/opt/qt5/qt5-build/qtserialport/src/serialport'
gmake[1]: Leaving directory '/opt/qt5/qt5-build/qtserialport/src'
gmake: Leaving directory '/opt/qt5/qt5-build/qtserialport'
/opt/qt5/qt5-build $

I'm doing the gmake over again without -j anything. Even though I don't think -j16 is particularly ambitious, sometimes it gets ahead of itself. It just takes forever with only one CPU on the job.

SGaist

What I do is usually start with multithreaded and if it fails go back to single threaded, fix the issue and start again with multithreaded.

Michele31415

I've started doing that too. In any case, with this:

/opt/qt5/qt5-build $ ../configure  -opensource -nomake examples -nomake tests -platform solaris-g++ -skip qtserialbus

we're now going much further but are not there yet.

/opt/qt5/qtbase/src/tools/moc/moc.cpp: In member function ‘void Moc::parseSlots(ClassDef*, FunctionDef::Access)’:
/opt/qt5/qtbase/src/tools/moc/moc.cpp:1049:18: warning: this statement may fall through [-Wimplicit-fallthrough=]
 1049 |             error("'using' directive not supported in 'slots' section");
      |             ~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/opt/qt5/qtbase/src/tools/moc/moc.cpp:1050:9: note: here
 1050 |         default:
      |         ^~~~~~~
/opt/qt5/qtbase/src/tools/moc/moc.cpp: In member function ‘void Moc::parseSignals(ClassDef*)’:
/opt/qt5/qtbase/src/tools/moc/moc.cpp:1103:18: warning: this statement may fall through [-Wimplicit-fallthrough=]
 1103 |             error("'using' directive not supported in 'signals' section");
      |             ~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/opt/qt5/qtbase/src/tools/moc/moc.cpp:1104:9: note: here
 1104 |         default:
      |         ^~~~~~~

Honestly, this error is mystifying.

SGaist

That one is just a warning. Does it error out on this warning ?

Michele31415

Hah! That joke's on me. (From now on I'll search for "error:" instead of just "error") Here's the real error:

...
In file included from /opt/qt5/qt3d/src/3rdparty/assimp/code/StreamReader.h:48,
                 from /opt/qt5/qt3d/src/3rdparty/assimp/code/AssimpPCH.h:151,
                 from /opt/qt5/qt3d/src/3rdparty/assimp/code/Bitmap.cpp:48:
/opt/qt5/qt3d/src/3rdparty/assimp/code/Bitmap.cpp: In instantiation of ‘std::size_t Assimp::Copy(uint8_t*, T&) [with T = short unsigned int; std::size_t = long unsigned int; uint8_t = unsigned char]’:
/opt/qt5/qt3d/src/3rdparty/assimp/code/Bitmap.cpp:93:44:   required from here
/opt/qt5/qt3d/src/3rdparty/assimp/code/ByteSwap.h:207:36: error: lvalue required as unary ‘&’ operand
  207 | # define AI_BE(t) ByteSwap::Swapped(t)
      |                   ~~~~~~~~~~~~~~~~~^~~
/opt/qt5/qt3d/src/3rdparty/assimp/code/Bitmap.cpp:85:22: note: in expansion of macro ‘AI_BE’
   85 |   std::memcpy(data, &AI_BE(field), sizeof(field)); return sizeof(field);
      |                      ^~~~~
/opt/qt5/qt3d/src/3rdparty/assimp/code/Bitmap.cpp: In instantiation of ‘std::size_t Assimp::Copy(uint8_t*, T&) [with T = unsigned int; std::size_t = long unsigned int; uint8_t = unsigned char]’:
/opt/qt5/qt3d/src/3rdparty/assimp/code/Bitmap.cpp:94:44:   required from here
/opt/qt5/qt3d/src/3rdparty/assimp/code/ByteSwap.h:207:36: error: lvalue required as unary ‘&’ operand
  207 | # define AI_BE(t) ByteSwap::Swapped(t)
      |                   ~~~~~~~~~~~~~~~~~^~~
/opt/qt5/qt3d/src/3rdparty/assimp/code/Bitmap.cpp:85:22: note: in expansion of macro ‘AI_BE’
   85 |   std::memcpy(data, &AI_BE(field), sizeof(field)); return sizeof(field);
      |                      ^~~~~
/opt/qt5/qt3d/src/3rdparty/assimp/code/Bitmap.cpp: In instantiation of ‘std::size_t Assimp::Copy(uint8_t*, T&) [with T = int; std::size_t = long unsigned int; uint8_t = unsigned char]’:
/opt/qt5/qt3d/src/3rdparty/assimp/code/Bitmap.cpp:108:42:   required from here
/opt/qt5/qt3d/src/3rdparty/assimp/code/ByteSwap.h:207:36: error: lvalue required as unary ‘&’ operand
  207 | # define AI_BE(t) ByteSwap::Swapped(t)
      |                   ~~~~~~~~~~~~~~~~~^~~
/opt/qt5/qt3d/src/3rdparty/assimp/code/Bitmap.cpp:85:22: note: in expansion of macro ‘AI_BE’
   85 |   std::memcpy(data, &AI_BE(field), sizeof(field)); return sizeof(field);
      |                      ^~~~~
gmake[4]: *** [Makefile:2840: .obj/Bitmap.o] Error 1
gmake[4]: Leaving directory '/opt/qt5/qt5-build/qt3d/src/plugins/sceneparsers/assimp'
gmake[3]: *** [Makefile:44: sub-assimp-make_first] Error 2
gmake[3]: Leaving directory '/opt/qt5/qt5-build/qt3d/src/plugins/sceneparsers'
gmake[2]: *** [Makefile:446: sub-plugins-sceneparsers-make_first] Error 2
gmake[2]: Leaving directory '/opt/qt5/qt5-build/qt3d/src'
gmake[1]: *** [Makefile:46: sub-src-make_first] Error 2
gmake[1]: Leaving directory '/opt/qt5/qt5-build/qt3d'

JonB

@Michele31415 said in QT5 build: CC: No such file or directory:

/opt/qt5/qt3d/src/3rdparty/assimp/code/Bitmap.cpp: In instantiation of ‘std::size_t Assimp::Copy(uint8_t*, T&) [with T = short unsigned int; std::size_t = long unsigned int; uint8_t = unsigned char]’:

I couldn't help searching :) https://github.com/ros/meta-ros/issues/526, in 2017

assimp: "error: lvalue required as unary '&' operand" on mips, mips64 and ppc

| /home/lukas/work/repositories/yoctoproject.org/poky/build/tmp/work/mips32r2-poky-linux/assimp/3.1.1-r0/assimp-3.1.1/code/Bitmap.cpp: In instantiation of 'std::size_t Assimp::Copy(uint8_t*, T&) [with T = short unsigned int; std::size_t = unsigned int; uint8_t = unsigned char]':

Dunno what you're supposed to do about it though? :)

I think your error has also been reported in this forum:
Qt 5.7.1 build in Debian (MIPS) fails.

@SGaist was going to deal with that topic back in 2017 :)

Michele31415

"Dunno what you're supposed to do about it though? :)"
Well that makes two of us. In my own search, this seems to suggest it's a programming error:
https://stackoverflow.com/questions/22788026/error-lvalue-required-as-unary-operand
How sayest thou, O great Gaist?

JonB

@Michele31415
:)
Yes, it's a programming error in the code which only shows up on certain architectures. Why it has not been picked up in whatever version you are building (which is that?) I do not know.

While building qt5 in Solaris 11.4 SPARC, I get:

Not that I know about these things, but then are you "MIPS"?

SGaist

@JonB said in QT5 build: CC: No such file or directory:

Not that I know about these things, but then are you "MIPS"?

Nop, he's SPARC.

As for that issue, coming from ASSIMP, it's likely something you should bring to their folks.

Sadly I do not have a big endian machine to check further what is going on there.

Michele31415

@SGaist "Sadly I do not have a big endian machine to check further what is going on there."
Would you like an account on my machine? It's a Sun T4-1 with plenty of spare CPU cycles and a fast fiber connection. Consider it my contribution to the QT project.

Michele31415

@SGaist I decided to press on, using the "scorched earth" method. Every time I hit an error I just commented it out. Turns out there were only two more places, in MathExtras.h. I now have a build that contains no instances of "error:". It ends thusly:

...
moc_qscriptdebuggercodefinderwidgetinterface_p.o .obj/moc_qscriptdebugoutputwidgetinterface_p.o .obj/moc_qscriptdebugoutputwidget_p.o .obj/moc_qscriptbreakpointswidgetinterface_p.o .obj/moc_qscriptbreakpointsmodel_p.o .obj/moc_qscripterrorlogwidgetinterface_p.o .obj/moc_qscripterrorlogwidget_p.o  -L/usr/sfw/lib -L/usr/openwin/lib -L/opt/qt5/qt5-build/qtbase/lib -lQt5Core -lpthread -lrt -lQt5Widgets -L/usr/sfw/lib -L/usr/openwin/lib -L/opt/qt5/qt5-build/qtbase/lib -lQt5Gui -L/opt/qt5/qt5-build/qtscript/lib -lQt5Script -lQt5Core -lpthread -lrt -lGL 
ln -s libQt5ScriptTools.so.5.8.0 libQt5ScriptTools.so
ln -s libQt5ScriptTools.so.5.8.0 libQt5ScriptTools.so.5
ln -s libQt5ScriptTools.so.5.8.0 libQt5ScriptTools.so.5.8
rm -f ../../lib/libQt5ScriptTools.so.5.8.0
mv -f libQt5ScriptTools.so.5.8.0  ../../lib/ 
rm -f ../../lib/libQt5ScriptTools.so
rm -f ../../lib/libQt5ScriptTools.so.5
rm -f ../../lib/libQt5ScriptTools.so.5.8
mv -f libQt5ScriptTools.so ../../lib/ 
mv -f libQt5ScriptTools.so.5 ../../lib/ 
mv -f libQt5ScriptTools.so.5.8 ../../lib/ 
gmake[3]: Leaving directory '/opt/qt5/qt5-build/qtscript/src/scripttools'
gmake[2]: Leaving directory '/opt/qt5/qt5-build/qtscript/src'
gmake[1]: Leaving directory '/opt/qt5/qt5-build/qtscript'

Is there some way to test it to see if it works?

Michele31415

Hearing nothing I decided to press on. gmake install did not go well:

root@hemlock:/opt/qt5/qt5-build# gmake install
cd qtbase/ && ( test -e Makefile || /opt/qt5/qt5-build/qtbase/bin/qmake -o Makefile /opt/qt5/qtbase/qtbase.pro -qtconf /opt/qt5/qt5-build/qtbase/bin/qt.conf -- -opensource -nomake examples -nomake tests -platform solaris-g++ -skip qtserialbus ) && gmake -f Makefile install
gmake[1]: Entering directory '/opt/qt5/qt5-build/qtbase'
cd src/ && ( test -e Makefile || /opt/qt5/qt5-build/qtbase/bin/qmake -o Makefile /opt/qt5/qtbase/src/src.pro -qtconf /opt/qt5/qt5-build/qtbase/bin/qt.conf -- -opensource -nomake examples -nomake tests -platform solaris-g++ -skip qtserialbus ) && gmake -f Makefile install
gmake[2]: Entering directory '/opt/qt5/qt5-build/qtbase/src'
cd tools/bootstrap/ && ( test -e Makefile || /opt/qt5/qt5-build/qtbase/bin/qmake -o Makefile /opt/qt5/qtbase/src/tools/bootstrap/bootstrap.pro -qtconf /opt/qt5/qt5-build/qtbase/bin/qt.conf -- -opensource -nomake examples -nomake tests -platform solaris-g++ -skip qtserialbus ) && gmake -f Makefile install
gmake[3]: Entering directory '/opt/qt5/qt5-build/qtbase/src/tools/bootstrap'
install -m 644 -p ../../../lib/libQt5Bootstrap.a /lib/libQt5Bootstrap.a
find: stat() error /lib/libQt5Bootstrap.a: No such file or directory
find: stat() error /bin/pod2man: Number of symbolic links encountered during path name traversal exceeds MAXSYMLINKS
find: stat() error /usr/bin/pod2man: Number of symbolic links encountered during path name traversal exceeds MAXSYMLINKS
find: cycle detected for /lib/secure/32/
find: cycle detected for /lib/crypto/32/
find: cycle detected for /lib/32/
find: cycle detected for /lib/fm/32/
find: cycle detected for /usr/lib/gss/32/
find: cycle detected for /usr/lib/pool/32/
find: cycle detected for /usr/lib/python2.7/vendor-packages/nss/32/
find: cycle detected for /usr/lib/python2.7/vendor-packages/solaris/32/
find: cycle detected for /usr/lib/python2.7/vendor-packages/zfs/32/
find: cycle detected for /usr/lib/reparse/32/
find: cycle detected for /usr/lib/secure/32/
find: cycle detected for /usr/lib/brand/solaris10/32/
find: cycle detected for /usr/lib/32/
find: cycle detected for /usr/lib/scsi/32/
find: cycle detected for /usr/lib/lwp/32/
find: cycle detected for /usr/lib/fm/topo/plugins/32/
find: cycle detected for /usr/lib/fm/32/
find: cycle detected for /usr/lib/rad/client/c/32/
find: cycle detected for /usr/lib/cfgadm/32/
find: cycle detected for /usr/lib/locale/en_US.UTF-8/32/
find: cycle detected for /usr/lib/locale/en_US.UTF-8/LO_LTYPE/32/
find: cycle detected for /usr/lib/locale/en_US.UTF-8/LC_CTYPE/32/
find: cycle detected for /usr/lib/security/32/
find: cycle detected for /usr/lib/link_audit/32/
find: cycle detected for /usr/lib/nfs/32/
find: cycle detected for /usr/lib/elfedit/32/
install: -p was not found anywhere!
gmake[3]: [Makefile:9516: install_target] Error 2 (ignored)
sed -e 's,[^ '\'']*/opt/qt5/qt5-build/[^/][^/]*/lib,,g' ../../../lib/libQt5Bootstrap.prl > /lib/libQt5Bootstrap.prl
sed -e 's,[^ '\'']*/opt/qt5/qt5-build/[^/][^/]*/lib,,g' ../../../lib/libQt5Bootstrap.la > /lib/libQt5Bootstrap.la
install -m 644 -p /opt/qt5/qt5-build/qtbase/mkspecs/modules-inst/qt_lib_bootstrap_private.pri //mkspecs/modules/
find: stat() error /bin/pod2man: Number of symbolic links encountered during path name traversal exceeds MAXSYMLINKS
find: stat() error /usr/bin/pod2man: Number of symbolic links encountered during path name traversal exceeds MAXSYMLINKS
find: cycle detected for /lib/secure/32/
...etc...

SGaist

Don't do that kind of things as root, you might break stuff ;-)

One thing I would do is to just build and install qtbase so you have a working base to go further.

Michele31415

I thought gmake install always had to be done as root. In any case, it works even less as ordinary user in qtbase:

/opt/qt5/qt5-build/qtbase $ gmake install
cd src/ && ( test -e Makefile || /opt/qt5/qt5-build/qtbase/bin/qmake -o Makefile /opt/qt5/qtbase/src/src.pro -qtconf /opt/qt5/qt5-build/qtbase/bin/qt.conf -- -opensource -nomake examples -nomake tests -platform solaris-g++ -skip qtserialbus ) && gmake -f Makefile install
gmake[1]: Entering directory '/opt/qt5/qt5-build/qtbase/src'
cd tools/bootstrap/ && ( test -e Makefile || /opt/qt5/qt5-build/qtbase/bin/qmake -o Makefile /opt/qt5/qtbase/src/tools/bootstrap/bootstrap.pro -qtconf /opt/qt5/qt5-build/qtbase/bin/qt.conf -- -opensource -nomake examples -nomake tests -platform solaris-g++ -skip qtserialbus ) && gmake -f Makefile install
gmake[2]: Entering directory '/opt/qt5/qt5-build/qtbase/src/tools/bootstrap'
install -m 644 -p ../../../lib/libQt5Bootstrap.a /lib/libQt5Bootstrap.a
find: stat() error /lib/libQt5Bootstrap.a: No such file or directory
find: stat() error /bin/pod2man: Number of symbolic links encountered during path name traversal exceeds MAXSYMLINKS
find: stat() error /usr/bin/pod2man: Number of symbolic links encountered during path name traversal exceeds MAXSYMLINKS
find: cannot read dir /etc/sudoers.d: Permission denied
find: cannot read dir /etc/svc/volatile/critpid: Permission denied

jsulm

@Michele31415 said in QT5 build: CC: No such file or directory:

I thought gmake install always had to be done as root

Only when installing into system directories only writable by root.

SGaist

Sorry, I managed to miss a part of my answer. You should put the sources somewhere in your standard user home folder and do the build there. Then when it's done successfully you can install it and then do it as root if you want it in a system folder. Otherwise, if it's just for your user, you can install it somewhere in your user home folder.

Michele31415

I guess I don't understand. I'm the only user. I always use /opt for big projects like QT or QEMU. The last thing I did was:

/opt/qt5/qt5-build/qtbase $ gmake -j16  > build.log 2>&1

and that completed with no errors. So do I now have a working Qt5 in /opt/Qt5 that I can call from other builds? (QT5 is a prerequisite for the OpenSCAD 3D modeler).
The "Building Qt5 from Git" web page says that after doing gmake you should do gmake install. Can I just go ahead and use Qt without doing the install? How do I tell if it's working?