QT5 build: CC: No such file or directory

[SGaist]

Just add the missing ; and go on with your build.

I don't know why it's not there both the dev and latest 5.15 branch have it.

[Michele31415]

@SGaist OK, I changed swapBytes to m_swapBytes (which is how it appears everywhere else) and that went away. Now:

88 |     { memcpy(this, &other, sizeof(QTransform)); }
    |                                              ^
../../../../include/QtGui/../../../../qtbase/src/gui/painting/qtransform.h:57:20: note: ‘class QTransform’ declared here
 57 | class Q_GUI_EXPORT QTransform
    |                    ^~~~~~~~~~
/opt/qt5/qtbase/src/plugins/platforms/vnc/qvncclient.cpp: In member function ‘void QVncClient::setPixelFormat()’:
/opt/qt5/qtbase/src/plugins/platforms/vnc/qvncclient.cpp:487:23: error: ‘qvnc_screen’ was not declared in this scope
487 |         m_swapBytes = qvnc_screen->swapBytes();
    |                       ^~~~~~~~~~~
/opt/qt5/qtbase/src/plugins/platforms/vnc/qvncclient.cpp: In member function ‘bool QVncClient::pixelConversionNeeded() const’:
/opt/qt5/qtbase/src/plugins/platforms/vnc/qvncclient.cpp:642:9: error: ‘qvnc_screen’ was not declared in this scope
642 |     if (qvnc_screen->swapBytes())
    |         ^~~~~~~~~~~
/opt/qt5/qtbase/src/plugins/platforms/vnc/qvncscreen.cpp: At global scope:
/opt/qt5/qtbase/src/plugins/platforms/vnc/qvncscreen.cpp:175:6: error: ‘QVNCScreen’ has not been declared
175 | bool QVNCScreen::swapBytes() const
    |      ^~~~~~~~~~
/opt/qt5/qtbase/src/plugins/platforms/vnc/qvncscreen.cpp:175:30: error: non-member function ‘bool swapBytes()’ cannot have cv-qualifier
175 | bool QVNCScreen::swapBytes() const
    |                              ^~~~~
/opt/qt5/qtbase/src/plugins/platforms/vnc/qvncscreen.cpp: In function ‘bool swapBytes()’:
/opt/qt5/qtbase/src/plugins/platforms/vnc/qvncscreen.cpp:177:9: error: ‘depth’ was not declared in this scope
177 |     if (depth() != 16)
    |         ^~~~~
/opt/qt5/qtbase/src/plugins/platforms/vnc/qvncscreen.cpp:180:9: error: ‘screen’ was not declared in this scope; did you mean ‘qGreen’?
180 |     if (screen())
    |         ^~~~~~
    |         qGreen
/opt/qt5/qtbase/src/plugins/platforms/vnc/qvncscreen.cpp:182:12: error: ‘frameBufferLittleEndian’ was not declared in this scope
182 |     return frameBufferLittleEndian();
    |            ^~~~~~~~~~~~~~~~~~~~~~~
gmake[5]: *** [Makefile:2889: .obj/qvncclient.o] Error 1
gmake[5]: *** Waiting for unfinished jobs....

[SGaist]

Which version of Qt are you building ?

I would have rather added the missing parenthesis in this case.

[Michele31415]

@SGaist I'm building what

git clone https://code.qt.io/qt/qt5.git

gave me two days ago. Where does it tell you what version you have? Which missing parentheses?
Should this line in qvncscreen.cpp

bool QVNCScreen::swapBytes() const

perhaps be

bool QVncScreen::swapBytes() const

because further up I see

QVncScreen::~QVncScreen()
{
    if (clientCursor)
        delete clientCursor;
}

[SGaist]

Ok, so you are in fact building the dev branch which is Qt 6. So is that what you want ?

I am currently wondering whether you have something that changed these files. Looking at the sources, I do not see these errors in the vnc plugin.

[Michele31415]

@SGaist Um, I'm building QT6?? How could that be? My build directory is called:
/opt/qt5/qt5-build $
I'm following directions from https://wiki.qt.io/Building_Qt_5_from_Git Now I'm confused.

[SGaist]

As I wrote before, the default branch that is checked out when cloning from git is the dev branch and that one is for Qt 6.

You have to explicitly check out the 5.15 branch if you want to build Qt 5.

The repository naming is currently in discussion.

[Michele31415]

@SGaist Sorry, I must have missed that. I just assumed that if I followed the directions on a page called "Building QT5 from Git" then I'd get QT5. I don't need any particular QT5, just something more than QT4. May I ask what command I need to issue to get 5.15? Is it

git clone https://github.com/qtproject/qt5.git --branch 5.15

?

[jsulm]

@Michele31415 I think you missed:

$ cd qt5
$ git checkout 5.12

from https://wiki.qt.io/Building_Qt_5_from_Git

[Michele31415]

Drat! Can I still do that now or do I have to start all over again? Maybe rm -rf qt5-build?

[SGaist]

No problem, you can checkout at branch at any time. Just ensure that all sub modules are as well.

You definitively want to nuke the build folder.

[Michele31415]

@SGaist Yup, configure ran cleanly through this time, first try. Assuming the gmake works, I'm wondering about this bit:

Qt is now configured for building. Just run 'gmake'.
Once everything is built, you must run 'gmake install'.
Qt is now configured for building. Just run 'gmake'.
Once everything is built, you must run 'gmake install'.
Qt will be installed into

Prior to reconfiguration, make sure you remove any leftovers from
the previous build.

That line that says "Qt will be installed into" just ends in space. Have I missed something else now?

[Michele31415]

gmake failed again but I can't find an actual error line anywhere in the output, just that "Error 2" at the very end.

...
../../../include/QtCore/../../../../qtbase/src/corelib/tools/qlist.h:238:16: note: because ‘QList<QString>::iterator’ has user-provided ‘QList<T>::iterator::iterator(const QList<T>::iterator&) [with T = QString]’
  238 |         inline iterator(const iterator &o) Q_DECL_NOTHROW : i(o.i){}
      |                ^~~~~~~~
rm -f ../../../lib/libQt5Bootstrap.a
ar cq ../../../lib/libQt5Bootstrap.a .obj/qlatincodec.o .obj/qtextcodec.o .obj/qutfcodec.o .obj/qglobal.o .obj/qlogging.o .obj/qmalloc.o .obj/qnumeric.o .obj/qabstractfileengine.o .obj/qbuffer.o .obj/qdatastream.o .obj/qdebug.o .obj/qdir.o .obj/qdiriterator.o .obj/qfile.o .obj/qfileinfo.o .obj/qfilesystementry.o .obj/qfilesystemengine.o .obj/qfsfileengine.o .obj/qfsfileengine_iterator.o .obj/qiodevice.o .obj/qfiledevice.o .obj/qresource.o .obj/qtemporaryfile.o .obj/qtextstream.o .obj/qstandardpaths.o .obj/qloggingcategory.o .obj/qloggingregistry.o .obj/qcoreapplication.o .obj/qcoreglobaldata.o .obj/qmetatype.o .obj/qvariant.o .obj/qsystemerror.o .obj/quuid.o .obj/qbitarray.o .obj/qbytearray.o .obj/qarraydata.o .obj/qbytearraymatcher.o .obj/qcommandlineparser.o .obj/qcommandlineoption.o .obj/qcryptographichash.o .obj/qdatetime.o .obj/qhash.o .obj/qlist.o .obj/qlinkedlist.o .obj/qlocale.o .obj/qlocale_tools.o .obj/qmap.o .obj/qregexp.o .obj/qringbuffer.o .obj/qpoint.o .obj/qrect.o .obj/qsize.o .obj/qline.o .obj/qstring.o .obj/qstringbuilder.o .obj/qstring_compat.o .obj/qstringlist.o .obj/qvector.o .obj/qvsnprintf.o .obj/qxmlutils.o .obj/qxmlstream.o .obj/qjson.o .obj/qjsondocument.o .obj/qjsonobject.o .obj/qjsonarray.o .obj/qjsonvalue.o .obj/qjsonparser.o .obj/qjsonwriter.o .obj/qdom.o .obj/qxml.o .obj/qfilesystemengine_unix.o .obj/qfilesystemiterator_unix.o .obj/qfsfileengine_unix.o .obj/qstandardpaths_unix.o
gmake[3]: Leaving directory '/opt/qt5/qt5-build/qtbase/src/tools/bootstrap'
gmake[2]: Leaving directory '/opt/qt5/qt5-build/qtbase/src'
gmake[1]: *** [Makefile:47: sub-src-make_first] Error 2
gmake[1]: Leaving directory '/opt/qt5/qt5-build/qtbase'
gmake: *** [Makefile:85: module-qtbase-make_first] Error 2
/opt/qt5/qt5-build $

[SGaist]

@Michele31415 said in QT5 build: CC: No such file or directory:

@SGaist Yup, configure ran cleanly through this time, first try. Assuming the gmake works, I'm wondering about this bit:

Qt is now configured for building. Just run 'gmake'.
Once everything is built, you must run 'gmake install'.
Qt is now configured for building. Just run 'gmake'.
Once everything is built, you must run 'gmake install'.
Qt will be installed into

Prior to reconfiguration, make sure you remove any leftovers from
the previous build.

That line that says "Qt will be installed into" just ends in space. Have I missed something else now?

If you used the same line as in your initial post, you are doing a developer build and hence it won't be installed. It's an "in place" build.

Unless you want to hack on Qt, you should drop that option as it changes some flags (I don't remember which though).

[SGaist]

As for the bootstrap error, are you using a multithreaded build ? I do not see the error trigger the stop.

[Michele31415]

@SGaist "If you used the same line as in your initial post"
Arrgh, yes I did. OK, we start over again. This time:

/opt/qt5/qt5-build $ ../configure  -opensource -nomake examples -nomake tests -platform solaris-g++

This also worked. Now starting gmake -j16 again.
UPDATE:
It just doesn't seem to like qvncscreen.cpp:

/opt/qt5/qtbase/src/plugins/platforms/vnc/qvncscreen.cpp: In member function ‘bool QVncScreen::swapBytes() const’:
/opt/qt5/qtbase/src/plugins/platforms/vnc/qvncscreen.cpp:182:24: error: invalid use of incomplete type ‘class QScreen’
  182 |         return screen()->frameBufferLittleEndian();
      |                        ^~
In file included from ../../../../include/QtGui/qcursor.h:1,
                 from ../../../../include/QtGui/5.8.0/QtGui/qpa/../../../../../../../qtbase/src/gui/kernel/qplatformscreen.h:60,
                 from ../../../../include/QtGui/5.8.0/QtGui/qpa/qplatformscreen.h:1,
                 from ../../../../include/QtFbSupport/5.8.0/QtFbSupport/private/../../../../../../../qtbase/src/platformsupport/fbconvenience/qfbscreen_p.h:54,
                 from ../../../../include/QtFbSupport/5.8.0/QtFbSupport/private/qfbscreen_p.h:1,
                 from /opt/qt5/qtbase/src/plugins/platforms/vnc/qvncscreen.h:43,
                 from /opt/qt5/qtbase/src/plugins/platforms/vnc/qvncscreen.cpp:40:
../../../../include/QtGui/../../../../qtbase/src/gui/kernel/qcursor.h:51:7: note: forward declaration of ‘class QScreen’
   51 | class QScreen;
      |       ^~~~~~~
/opt/qt5/qtbase/src/plugins/platforms/vnc/qvncscreen.cpp:183:12: error: ‘frameBufferLittleEndian’ was not declared in this scope
  183 |     return frameBufferLittleEndian();
      |            ^~~~~~~~~~~~~~~~~~~~~~~
gmake[5]: *** [Makefile:2355: .obj/qvncscreen.o] Error 1
gmake[5]: Leaving directory '/opt/qt5/qt5-build/qtbase/src/plugins/platforms/vnc'
gmake[4]: *** [Makefile:121: sub-vnc-make_first] Error 2
gmake[4]: Leaving directory '/opt/qt5/qt5-build/qtbase/src/plugins/platforms'
gmake[3]: *** [Makefile:100: sub-platforms-make_first] Error 2
gmake[3]: Leaving directory '/opt/qt5/qt5-build/qtbase/src/plugins'
gmake[2]: *** [Makefile:669: sub-plugins-make_first] Error 2
gmake[2]: Leaving directory '/opt/qt5/qt5-build/qtbase/src'
gmake[1]: *** [Makefile:47: sub-src-make_first] Error 2
gmake[1]: Leaving directory '/opt/qt5/qt5-build/qtbase'
gmake: *** [Makefile:85: module-qtbase-make_first] Error 2
/opt/qt5/qt5-build $

And indeed this seems to be MIA:

/opt/qt5 $ ggrep -rl "frameBufferLittleEndian" .           
./qtbase/src/plugins/platforms/vnc/qvncscreen.cpp
/opt/qt5 $

[SGaist]

@Michele31415 said in QT5 build: CC: No such file or directory:

frameBufferLittleEndian

You might be the first person building that plugin on a big endian system.

AFAIK, that call should be commented out with a Todo comment and the method do nothing and return false.

I'd recommend doing that so your build can continue.

[Michele31415]

I was actually wondering about that. So I've now changed that block at the end of qvncscreen.cpp to read

#if Q_BYTE_ORDER == Q_BIG_ENDIAN
bool QVncScreen::swapBytes() const
//bool QVNCScreen::swapBytes() const
{
    if (depth() != 16)
        return false;

//    if (screen())
//        return screen()->frameBufferLittleEndian();
//    return frameBufferLittleEndian();
    return false ;
}
#endif

Now we're getting

/opt/qt5/qtbase/src/plugins/platforms/vnc/qvncclient.cpp:642:9: error: ‘qvnc_screen’ was not declared in this scope
  642 |     if (qvnc_screen->swapBytes())

I'll have to see if qvnc_screen is actually declared anywhere.

[Michele31415]

I had to comment this out in qvncclient.cpp (probably not a good thing to do but I don't know what this is for and I don't really need VNC in QT anyway)::

#if Q_BYTE_ORDER == Q_BIG_ENDIAN
    //    m_swapBytes = qvnc_screen->swapBytes();
#endif

Now it's finally linking but still not happy with some qtserialbus stuff:

/opt/qt5/qt5-build/qtserialbus/lib/libQt5SerialBus.sold: 
fatal: symbol referencing errors
ld: fatal: symbol referencing errors
collect2: error: ld returned 1 exit status
collect2: error: ld returned 1 exit status
gmake[5]: *** [Makefile:74: ../../../../plugins/canbus/libqtpeakcanbus.so] Error 1
gmake[5]: Leaving directory '/opt/qt5/qt5-build/qtserialbus/src/plugins/canbus/peakcan'
gmake[5]: *** [Makefile:74: ../../../../plugins/canbus/libqttinycanbus.so] Error 1
gmake[5]: Leaving directory '/opt/qt5/qt5-build/qtserialbus/src/plugins/canbus/tinycan'
gmake[4]: *** [Makefile:69: sub-tinycan-make_first] Error 2
gmake[4]: *** Waiting for unfinished jobs....
gmake[4]: *** [Makefile:44: sub-peakcan-make_first] Error 2
gmake[4]: Leaving directory '/opt/qt5/qt5-build/qtserialbus/src/plugins/canbus'
gmake[3]: *** [Makefile:43: sub-canbus-make_first] Error 2
gmake[3]: Leaving directory '/opt/qt5/qt5-build/qtserialbus/src/plugins'
gmake[2]: *** [Makefile:70: sub-plugins-make_first] Error 2
gmake[2]: Leaving directory '/opt/qt5/qt5-build/qtserialbus/src'
gmake[1]: *** [Makefile:45: sub-src-make_first] Error 2
gmake[1]: Leaving directory '/opt/qt5/qt5-build/qtserialbus'
gmake: *** [Makefile:235: module-qtserialbus-make_first] Error 2

I'm not particularly interested in the serial bus. Can I exclude this somehow? I grepped the configure --help for "serial" but came up empty.

[SGaist]

You can add a -skip <module_to_skip> to the configure command for all modules you do not want to build.

When you have such build error, you should restart the build single threaded so you get the exact point where it failed. Here it is lost somewhere in one of the threads used for the build process.