Signal and Slot connected by slot not called?

[SPlatten]

@KroMignon , This is not possible

That's why I asked, because in other instances it works, but when I step into this with the debugger and have a breakpoint in the slot, it doesn't get there.

In all my thread loops now I have:

QCoreApplication::processEvents();

I've checked the build folder and there isn't a moc_ file for the file this emit is called in.

[KroMignon]

@SPlatten said in Signal and Slot connected by slot not called?:

In all my thread loops now I have:
QCoreApplication::processEvents();

This not a good code practice.
As side note QCoreApplication::processEvents(); works only if the object you are using are living in the main thread and you are running in the main thread! Sorry, this is wrong!

I've checked the build folder and there isn't a moc_ file for the file this emit is called in.

This does not made sense to me, if you don't have the moc_ file, then signal code is not generated and it will never work, it will event not compile because you would have a not fully defined class!

[SPlatten]

@KroMignon , I can't tell you why, the class header:

/**
 * File:    clsJSON.h
 * Notes:   This file contains the prototype for the clsJSON class.
 *******************************************************************************
 * Class:   clsJSON
 *
 * Static Methods:
 *  addCommonJSONflds       Add common fields in a JSON object
 *  blnDecodeAccordingToType    Decode JSON according to type
 *  cstrAppName             Access method to get application name
 *  pobjGetScriptEng        Access method to get mspobjJSeng
 *  registerDecoder         Register a decode function according to type
 *  sendAck                 Builds and queues Ack message to send
 *  strExplodeJSON          Explodes QJson array or object to string
 *  terminateModules        Terminates all modules
 *  updateModuleHB          Updates a module's heartbeat
 *
 * Static Members:
 *  msccCloseCurlyBracket   }
 *  msccCloseSquareBracket  ]
 *  msccColon               :
 *  msccDoubleQuote         "
 *  msccKeyDelimiter        ,
 *  msccOpenCurlyBracket    {
 *  msccOpenSquareracket    [
 *  msccSingleQuote         '
 *  mscszAck                JSON label: ack
 *  mscszCmdDebug           JSON label: dbg
 *  mscszCmdHB              JSON command: hearbeat
 *  mscszCmdIndex           JSON label: cmdidx
 *  mscszCmdInitial         init
 *  mscszCmdNotify          notify
 *  mscszCmdReady           ready
 *  mscszCommand            JSON label: command
 *  mscszCommands           JSON label: commands
 *  mscszCRLF               \r\n
 *  mscszDecoder            JSON label: decoder
 *  mscszError              JSON label: error
 *  mscszFound              JSON label: found
 *  mscszKeys               JSON label: keys
 *  mscszMatch              JSON label: match
 *  mscszMember             JSON label: member
 *  mscszModule             module
 *  mscszMsgID              msgID
 *  mscszMsgType            msgType
 *  mscszPID                PID
 *  mscszScriptFile         JSON label: script
 *  mscszSource             JSON label: source
 *  mscszSkipOver           JSON label: skipover
 *  mscszText               JSON label: text
 *  mscszTime               JSON label: time
 *  mscszTrue               JSON label: true
 *  mscszType               JSON label: type
 *  mscszType ...           JSON conversion types
 *  mscszWhitespace         "\t\n\v\f\r "
 *  mslstDecoders           List of JSON decoders
 *  msmpSockets             Map of JSON sockets
 *  mspobjJSeng             Pointer to instance of script engine
 *
 * Methods:
 *  clsJSON                 Class constructor
 *  ~clsJSON                Class destructor
 *  blnFind                 Returns true if name found else false
 *  blnIsArray              Returns true if JSON is an array
 *  blnIsObject             Returns true if JSON is an object
 *  blnIsValid              Returns true if JSON object is valid else false
 *  fromByteArray           Decodes passed byte array into JSON object
 *  fromString              Decodes passed string into JSON object
 *  strToString             Constructs JSON string
 *  strURIdecode            Decoded string
 *  toQJsonObject           Returns instance of QJsonObject
 *
 * Members:
 *  maryJSON                Array of JSON objects
 *  mbytarrJSON             Byte array containing the JSON for the object
 *  mobjJSON                Object containing JSON
 *******************************************************************************
 * History: 2019/05/03 Created by Simon Platten
 */
#ifndef CLSJSON_H
    #define CLSJSON_H

    #include <map>

    #include <QAbstractSocket>
    #include <QProcess>
    #include <QString>
    #include <QStringList>
    #include <QJSEngine>
    #include <QJSValue>
    #include <QJsonArray>
    #include <QJsonDocument>
    #include <QJsonObject>
    #include <QJsonValue>

    #include "clsDebugService.h"
    #include "clsModule.h"

    typedef bool(*pfnDecodeJSON)(const QJsonObject& crobjJSON);
    typedef std::map<QString, QMetaObject::Connection> mpConnections;        
    typedef QList<QJsonObject> lstDecoders;

    class clsJSON {
    private:
        QJsonDocument mdocJSON;
        static QJSEngine* mspobjJSeng;
        static lstDecoders mslstDecoders;

        QString strToJSONX(QJsonValueRef refJSON);

    public:
        static const char msccCloseCurlyBracket     = '}';
        static const char msccCloseSquareBracket    = ']';
        static const char msccColon                 = ':';
        static const char msccDoubleQuote           = '\"';
        static const char msccKeyDelimiter          = ',';
        static const char msccOpenCurlyBracket      = '{';
        static const char msccOpenSquareracket      = '[';
        static const char msccSingleQuote           = '\'';
        static const int mscintQtVersion;
        static const char mscszAck[];
        static const char mscszCommand[];
        static const char mscszCommands[];
        static const char mscszCmdDebug[];
        static const char mscszCmdHB[];
        static const char mscszCmdIndex[];
        static const char mscszCmdInitial[];
        static const char mscszCmdNotify[];
        static const char mscszCmdReady[];
        static const char mscszCRLF[];
        static const char mscszDecoder[];
        static const char mscszError[];
        static const char mscszFound[];
        static const char mscszKeys[];
        static const char mscszMatch[];
        static const char mscszMember[];
        static const char mscszModule[];
        static const char mscszMsgID[];
        static const char mscszMsgType[];
        static const char mscszPID[];
        static const char mscszScriptFile[];
        static const char mscszSource[];
        static const char mscszSkipOver[];
        static const char mscszText[];
        static const char mscszTime[];
        static const char mscszTrue[];
        static const char mscszType[];
        static const char mscszTypeChar[];
        static const char mscszTypeDouble[];
        static const char mscszTypeFloat[];
        static const char mscszTypeInt[];
        static const char mscszTypeLong[];
        static const char mscszTypeShort[];
        static const char mscszTypeString[];
        static const char mscszTypeUChar[];
        static const char mscszTypeUInt[];
        static const char mscszTypeULong[];
        static const char mscszTypeUShort[];
        static const char mscszWhitespace[];

        clsJSON(const QByteArray& crbytarrJSON);
        clsJSON(const QString& crstrJSON);
        ~clsJSON();
        static void addCommonJSONflds(QJsonObject& robjJSON
                                     ,const char* pszMsgType = nullptr
                                     ,clsModule* pobjModule = nullptr);
        static bool blnDecodeAccordingToType(const QJsonObject& crobjSubject);
        bool blnFind(const QString& crstrName, QJsonValue* pobjFound = nullptr);
        bool blnIsArray() { return mdocJSON.isArray(); }
        bool blnIsObject() { return mdocJSON.isObject(); }
        bool blnIsValid();
        void fromByteArray(const QByteArray& crbytarrJSON);
        void fromString(const QString& crpstrJSON);
        static QJSEngine* pobjGetScriptEng();
        static void registerDecoder(const QJsonObject& crobjDecoder);
        static void sendAck(const QJsonObject& crobjJSON);
#if defined(DEBUG_JSON)
        static QString strExplodeJSON(const QJsonArray& craryJSON, quint8 uint8Level);
        static QString strExplodeJSON(const QJsonObject& crorbJSON, quint8 uint8Level);
#endif
        QString strToString();
        QString strURIdecode(const char* pszData);
        static void terminateModules();
        QJsonObject toQJsonObject();
        static void updateModuleHB(const QString& crstrAlias);
    };
    //JSON packet decodes
#if defined(MODULE_BUILD)
    bool blnDecodeAck(const QJsonObject& crobjJSON);
    bool blnDecodeNotify(const QJsonObject& crobjJSON);
#else
    bool blnDecodeDebug(const QJsonObject& crobjJSON);
    bool blnDecodeHeartbeat(const QJsonObject& crobjJSON);
    bool blnDecodeReady(const QJsonObject& crobjJSON);
#endif

#endif // CLSJSON_H

In the build folder there is:

clsJSON.o

But no mov_clsJSON.o

[KroMignon]

@SPlatten said in Signal and Slot connected by slot not called?:

But no mov_clsJSON.o

Of course there is not moc file for this class, it has no Q_OBJECT, nor it is a QObject sub-class , nor it have signals or slots!

In you code extract, you are talking about clsModule not clsJSON, now I am again totally lost... what is the purpose of your question?

[SPlatten]

@KroMignon , here is the content of the file moc_clsModule.cpp:

/****************************************************************************
** Meta object code from reading C++ file 'clsModule.h'
**
** Created by: The Qt Meta Object Compiler version 67 (Qt 5.15.2)
**
** WARNING! All changes made in this file will be lost!
*****************************************************************************/

#include <memory>
#include "../clsModule.h"
#include <QtCore/qbytearray.h>
#include <QtCore/qmetatype.h>
#if !defined(Q_MOC_OUTPUT_REVISION)
#error "The header file 'clsModule.h' doesn't include <QObject>."
#elif Q_MOC_OUTPUT_REVISION != 67
#error "This file was generated using the moc from 5.15.2. It"
#error "cannot be used with the include files from this version of Qt."
#error "(The moc has changed too much.)"
#endif

QT_BEGIN_MOC_NAMESPACE
QT_WARNING_PUSH
QT_WARNING_DISABLE_DEPRECATED
struct qt_meta_stringdata_clsModule_t {
    QByteArrayData data[12];
    char stringdata0[106];
};
#define QT_MOC_LITERAL(idx, ofs, len) \
    Q_STATIC_BYTE_ARRAY_DATA_HEADER_INITIALIZER_WITH_OFFSET(len, \
    qptrdiff(offsetof(qt_meta_stringdata_clsModule_t, stringdata0) + ofs \
        - idx * sizeof(QByteArrayData)) \
    )
static const qt_meta_stringdata_clsModule_t qt_meta_stringdata_clsModule = {
    {
QT_MOC_LITERAL(0, 0, 9), // "clsModule"
QT_MOC_LITERAL(1, 10, 3), // "PID"
QT_MOC_LITERAL(2, 14, 0), // ""
QT_MOC_LITERAL(3, 15, 11), // "crstrProces"
QT_MOC_LITERAL(4, 27, 8), // "int64PID"
QT_MOC_LITERAL(5, 36, 7), // "sendAck"
QT_MOC_LITERAL(6, 44, 9), // "crobjJSON"
QT_MOC_LITERAL(7, 54, 8), // "sendJSON"
QT_MOC_LITERAL(8, 63, 12), // "QJsonObject&"
QT_MOC_LITERAL(9, 76, 8), // "robjJSON"
QT_MOC_LITERAL(10, 85, 9), // "onSendAck"
QT_MOC_LITERAL(11, 95, 10) // "onSendJSON"

    },
    "clsModule\0PID\0\0crstrProces\0int64PID\0"
    "sendAck\0crobjJSON\0sendJSON\0QJsonObject&\0"
    "robjJSON\0onSendAck\0onSendJSON"
};
#undef QT_MOC_LITERAL

static const uint qt_meta_data_clsModule[] = {

 // content:
       8,       // revision
       0,       // classname
       0,    0, // classinfo
       5,   14, // methods
       0,    0, // properties
       0,    0, // enums/sets
       0,    0, // constructors
       0,       // flags
       3,       // signalCount

 // signals: name, argc, parameters, tag, flags
       1,    2,   39,    2, 0x06 /* Public */,
       5,    1,   44,    2, 0x06 /* Public */,
       7,    1,   47,    2, 0x06 /* Public */,

 // slots: name, argc, parameters, tag, flags
      10,    1,   50,    2, 0x0a /* Public */,
      11,    1,   53,    2, 0x0a /* Public */,

 // signals: parameters
    QMetaType::Void, QMetaType::QString, QMetaType::LongLong,    3,    4,
    QMetaType::Void, QMetaType::QJsonObject,    6,
    QMetaType::Void, 0x80000000 | 8,    9,

 // slots: parameters
    QMetaType::Void, QMetaType::QJsonObject,    6,
    QMetaType::Void, 0x80000000 | 8,    9,

       0        // eod
};

void clsModule::qt_static_metacall(QObject *_o, QMetaObject::Call _c, int _id, void **_a)
{
    if (_c == QMetaObject::InvokeMetaMethod) {
        auto *_t = static_cast<clsModule *>(_o);
        Q_UNUSED(_t)
        switch (_id) {
        case 0: _t->PID((*reinterpret_cast< const QString(*)>(_a[1])),(*reinterpret_cast< const qint64(*)>(_a[2]))); break;
        case 1: _t->sendAck((*reinterpret_cast< const QJsonObject(*)>(_a[1]))); break;
        case 2: _t->sendJSON((*reinterpret_cast< QJsonObject(*)>(_a[1]))); break;
        case 3: _t->onSendAck((*reinterpret_cast< const QJsonObject(*)>(_a[1]))); break;
        case 4: _t->onSendJSON((*reinterpret_cast< QJsonObject(*)>(_a[1]))); break;
        default: ;
        }
    } else if (_c == QMetaObject::IndexOfMethod) {
        int *result = reinterpret_cast<int *>(_a[0]);
        {
            using _t = void (clsModule::*)(const QString & , const qint64 & );
            if (*reinterpret_cast<_t *>(_a[1]) == static_cast<_t>(&clsModule::PID)) {
                *result = 0;
                return;
            }
        }
        {
            using _t = void (clsModule::*)(const QJsonObject & );
            if (*reinterpret_cast<_t *>(_a[1]) == static_cast<_t>(&clsModule::sendAck)) {
                *result = 1;
                return;
            }
        }
        {
            using _t = void (clsModule::*)(QJsonObject & );
            if (*reinterpret_cast<_t *>(_a[1]) == static_cast<_t>(&clsModule::sendJSON)) {
                *result = 2;
                return;
            }
        }
    }
}

QT_INIT_METAOBJECT const QMetaObject clsModule::staticMetaObject = { {
    QMetaObject::SuperData::link<QProcess::staticMetaObject>(),
    qt_meta_stringdata_clsModule.data,
    qt_meta_data_clsModule,
    qt_static_metacall,
    nullptr,
    nullptr
} };


const QMetaObject *clsModule::metaObject() const
{
    return QObject::d_ptr->metaObject ? QObject::d_ptr->dynamicMetaObject() : &staticMetaObject;
}

void *clsModule::qt_metacast(const char *_clname)
{
    if (!_clname) return nullptr;
    if (!strcmp(_clname, qt_meta_stringdata_clsModule.stringdata0))
        return static_cast<void*>(this);
    return QProcess::qt_metacast(_clname);
}

int clsModule::qt_metacall(QMetaObject::Call _c, int _id, void **_a)
{
    _id = QProcess::qt_metacall(_c, _id, _a);
    if (_id < 0)
        return _id;
    if (_c == QMetaObject::InvokeMetaMethod) {
        if (_id < 5)
            qt_static_metacall(this, _c, _id, _a);
        _id -= 5;
    } else if (_c == QMetaObject::RegisterMethodArgumentMetaType) {
        if (_id < 5)
            *reinterpret_cast<int*>(_a[0]) = -1;
        _id -= 5;
    }
    return _id;
}

// SIGNAL 0
void clsModule::PID(const QString & _t1, const qint64 & _t2)
{
    void *_a[] = { nullptr, const_cast<void*>(reinterpret_cast<const void*>(std::addressof(_t1))), const_cast<void*>(reinterpret_cast<const void*>(std::addressof(_t2))) };
    QMetaObject::activate(this, &staticMetaObject, 0, _a);
}

// SIGNAL 1
void clsModule::sendAck(const QJsonObject & _t1)
{
    void *_a[] = { nullptr, const_cast<void*>(reinterpret_cast<const void*>(std::addressof(_t1))) };
    QMetaObject::activate(this, &staticMetaObject, 1, _a);
}

// SIGNAL 2
void clsModule::sendJSON(QJsonObject & _t1)
{
    void *_a[] = { nullptr, const_cast<void*>(reinterpret_cast<const void*>(std::addressof(_t1))) };
    QMetaObject::activate(this, &staticMetaObject, 2, _a);
}
QT_WARNING_POP
QT_END_MOC_NAMESPACE

The reason I posted clsJSON.h is that the emit that isn't working is called from a static method of this class:

void clsJSON::sendAck(const QJsonObject& crobjJSON) {
    QJsonObject::const_iterator citrCmdType = crobjJSON.find(clsJSON::mscszMsgType)
                               ,citrSourceFound = crobjJSON.find(clsJSON::mscszSource);
    if ( citrCmdType == crobjJSON.end() || citrSourceFound == crobjJSON.end() ) {
        return;
    }
    const QString cstrMsgType = citrCmdType->toString()
                 ,cstrSource = citrSourceFound->toString();
    clsModule* pobjModule = clsModule::pGetModule(cstrSource);

    if ( pobjModule == nullptr ) {
        return;
    }
    //Build up acknowedge response
    QJsonObject objJSON;
    //Add the modified acknowledge message type
    QString strAckMsgType(clsJSON::mscszAck + cstrMsgType);
    objJSON.insert(clsJSON::mscszMsgType, strAckMsgType);
    //This needs to be XMLMPAM as its the only app that can acknowledge (At this time)!
    objJSON.insert(clsJSON::mscszSource, clsDebugService::cstrPrefix());
    emit pobjModule->sendJSON(objJSON);
}

[KroMignon]

@SPlatten said in Signal and Slot connected by slot not called?:

The reason I posted clsJSON.h is that the emit that isn't working is called from a static method of this class:

Again:

• emit is a semantical sugar, it has no signification, it is only for the reader to identify usage of a signal
  emit pobjModule->sendJSON(objJSON); is absolutely the same as pobjModule->sendJSON(objJSON);
  You are simply call a member, nothing more, nothing less.

• signals are in fact functions

• corresponding function for a signal for a given class is automatically generated by moc during compilation

• this generated function is always a public function in the class (in your example in clsModule)

Typically implementation will record slot call in event loop of the thread from receiver.
So to ensure slot will be called, the event loop of the receiver must not be locked.

I don't know how to explain it better.

[Pl45m4]

@SPlatten

You dont use Signals&Slots in clsJSON directly, which is totally fine, but AFAIK you also can't emit signals in other classes (which do inherit from QObject, have macro and so on), when not having the Q_OBJECT macro. This is the case here, I guess.

[Anonymous_Banned275]

@KroMignon said in Signal and Slot connected by slot not called?:

emit is a semantical sugar, it has no signification, it is only for the reader to identify usage of a signal
emit pobjModule->sendJSON(objJSON); is absolutely the same as pobjModule->sendJSON(objJSON);
You are simply call a member, nothing more, nothing less.

Allow me to interpret this reoccurring "sugary " statement

emit pobjModule->sendJSON(objJSON);

using "emit" is therefore equivalent to

int a = 10; /// set variable a to 10

where

/// set variable a to 10 is a superficial sugar telling nothing about what "a" is /does

IMHO
repeating the "emit does nothing , it is a sugar " directly discourages to write readable code , unless the coder objective is to write obfuscated stuff for false "job security".
Cheers
'

[KroMignon]

@AnneRanch said in Signal and Slot connected by slot not called?:

repeating the "emit does nothing , it is a sugar " directly discourages to write readable code , unless the coder objective is to write obfuscated stuff for false "job security".
Cheers
'

You are misunderstanding my comments.
All I want to say with "semantical sugar", is that there is nothing which is magically done here.
If emitting signal is working somewhere, it will work everywhere.

And if the slot is not called by one specific call only, it simply means that the thread event loop is not working/locked.

I am not an English native speaker, so I try to explain the best I can.

[SPlatten]

@KroMignon , thank you, np.

[JKSH]

@SPlatten :

• Write a qDebug() message just after the QObject::connect(this, &clsModule::sendJSON, this, &clsModule::onSendJSON);.
• Write a qDebug() message just after the emit pobjModule->sendJSON(objJSON);
• Write a qDebug() message at the start just after the clsModule::onSendJSON()

Questions:

1. When you run your program, which debug messages above get printed to output?
2. Which thread does your clsModule object live in?
3. Which thread do you call clsJSON::sendAck() from?
4. Why does clsModule inherit QProcess?

[Anonymous_Banned275]

@KroMignon said in Signal and Slot connected by slot not called?:

I am not an English native speaker, so I try to explain the best I can.

Neither am I .
Telling me I do not understand what you wrote is not the subject of discussion.
And it works BOTH ways.

Let me try it another way - "emit" is not a keyword.
It is a macro and has a purpose / function in the code.
Its placement is important.

BUT if majority of forum participators will keep downgrading "emit" to "sugar" it does not mean such attitude is the best.

Just to make sure - I object ONLY to your treatment of "emit" , I have no comment to the rest of you post.

[J.Hilk]

@AnneRanch said in Signal and Slot connected by slot not called?:

Let me try it another way - "emit" is not a keyword.

true

It is a macro

true(ish)

and has a purpose / function in the code.

false

Its placement is important.

false

here's the definition of emit

#ifndef QT_NO_EMIT
# define emit
#endif

its quite literally expands to nothing

[Pl45m4]

@AnneRanch said in Signal and Slot connected by slot not called?:

It is a macro and has a purpose / function in the code.

It's just for debug purposes and to increase the readability. You can say from looking at the emit, that you "call" (or emit) a signal next. Without, it would be hard(er) to say, where exactly you emit your signals. You would need to follow the trace of every signal.

[rrlopez]

@JKSH said in Signal and Slot connected by slot not called?:

@SPlatten :

• Write a qDebug() message just after the QObject::connect(this, &clsModule::sendJSON, this, &clsModule::onSendJSON);.
• Write a qDebug() message just after the emit pobjModule->sendJSON(objJSON);
• Write a qDebug() message at the start just after the clsModule::onSendJSON()

Questions:

1. When you run your program, which debug messages above get printed to output?
2. Which thread does your clsModule object live in?
3. Which thread do you call clsJSON::sendAck() from?
4. Why does clsModule inherit QProcess?

I would also suggest adding to the debug log the result of the connection to verify that the connection is actually done correctly. Also, I have a question. On your output log do you see some log related to the module clsModule not being registered using qRegisterMetaType() or anything like that when you try to perform your connection? It may be that we need to register this module as a meta type in order to use it on the connections.

[SPlatten]

@rrlopez , what makes you say I need to register clsModule as a type? I don't pass that as a signal parameter I only pass QJsonObject.

[rrlopez]

I was just asking if you had a message on your output log. If you don't get that message then you don't need to register clsModule as a type. What interest me the most is the result of the connection. If you create a QMetaObject::Connection object and assign it to the connection you're trying to do, is it valid? you can check that by doing something like this:

QMetaObject::Connection testConnection = QObject::connect(this, &clsModule::sendJSON, this, &clsModule::onSendJSON);
if (!testConnection)
{
      // handle testConnection invalid case (or print error message)
}