make a beautiful pdf with qt

[Albator]

so i look an another answers :
credits @mrjj and @Ni. Sumi

and i found solution for display my qtablewidget but i don't understand how the layout or size works.
I display everything I needed, but now I need to understand how everything works to place everything correctly.

for exemple in this code i have :

QString nomFichier = QFileDialog::getSaveFileName(0, QString::fromUtf8("Générer PDF"), QCoreApplication::applicationDirPath(), "*.pdf");

    if (!nomFichier.isEmpty())
    {
        if (QFileInfo(nomFichier).suffix().isEmpty())
            nomFichier.append(".pdf");

        QPrinter printer(QPrinter::HighResolution);
        printer.setOutputFormat(QPrinter::PdfFormat);
        printer.setOutputFileName(nomFichier);
        printer.setOrientation(QPrinter::Portrait);
        printer.setPaperSize(QPrinter::A4);
        printer.setPageSize(QPrinter::A4);
        printer.setPageMargins(15,15,15,15,QPrinter::Millimeter);

        qDebug() << "Page px :" << printer.pageRect() << printer.paperRect();
        qDebug() << "Page mm :" << printer.pageRect(QPrinter::Millimeter) << printer.paperRect(QPrinter::Millimeter);
        qreal left, top, right, bottom;
        printer.getPageMargins(&left, &top, &right, &bottom, QPrinter::DevicePixel);
        qDebug() << "Marges px :" << left << top << right << bottom;
        printer.getPageMargins(&left, &top, &right, &bottom, QPrinter::Millimeter);
        qDebug() << "Marges mm :" << left << top << right << bottom;

        QPainter painter(&printer);

            // Pour écrire du texte
        QFont police("Tekton Pro",30);
            QFontMetrics tailleMotPx = painter.fontMetrics();
            int largeurLabel = tailleMotPx.width("titre");

            painter.setPen(Qt::black);
            painter.drawText(printer.width()/2 - largeurLabel/2,50,"titre");
            painter.drawText(0, printer.pageRect().y()*2, QString::fromUtf8("Ligne 1"));

            // Une nouvelle page
            printer.newPage();
            const QImage image("C:/Users/portalc/Pictures/Saved Pictures/logo_moni.jpg");
            const QPoint imageCoordinates(15,0);

            const QImage image1("C:/Users/portalc/Pictures/Saved Pictures/logo_moni.jpg");
            const QPoint imageCoordinates1(9000,0);


            painter.drawImage(imageCoordinates, image);
            painter.drawImage(imageCoordinates1, image1);
            //pdfWriter.newPage();

            painter.drawText(0, printer.pageRect().y()*3, QString::fromUtf8("Ligne 2"));


             QPixmap pix(ui->tab_indic->size());
             QPainter painter1(&pix);
             ui->tab_indic->render(&painter);
             painter.end();


             painter1.begin(&printer);
             double xscale = printer.pageRect().width() / double(pix.width());
             double yscale = printer.pageRect().height() / double(pix.height());
             double scale = qMin(xscale, yscale);
             painter.translate(printer.paperRect().x() + printer.pageRect().width() / 2,
                               printer.paperRect().y()*4 + printer.pageRect().height() / 2);
             painter.scale(scale, scale);
             painter.translate(-ui->tab_indic->width() / 2, -ui->tab_indic->height() / 2);
             painter.drawPixmap(0, 0, pix);
             painter.end();

             qDebug() << printer.pageRect().width();
             qDebug() << printer.pageRect().height();
             qDebug() << printer.paperRect().x();
             qDebug() << printer.pageRect().y()*4;
             qDebug() << yscale << xscale << scale ;

with this code everything overlaps.

how to play with the parameters to make it right?

[SGaist]

Well since you have simple requirements, you could also consider building an html document and print that. It could prove simpler to get the way you want it.

[Albator]

I'm trying to familiarize myself with this method so for the moment it's not too complex but it could become one.
but the idea of html is still an interesting option :)

[SGaist]

If memory serves well, the "C++ GUI Programming with Qt 4" book has a chapter dedicated to that with examples. Even if it's Qt 4, the concepts still applies here.

[Albator]

to take the whole qtablewidget with a lot of rows and columns, just go to the .ui and change the :
minimum size

then we use this piece of code to insert the tab in a pdf :

QPixmap pix(QSize(1800,1000)); //with the new size of minimum size
QPainter painter(&pix);
ui->tab_indic->render(&painter);
painter.end();

QPrinter printer(QPrinter::HighResolution);
printer.setOrientation(QPrinter::Portrait);
printer.setOutputFormat(QPrinter::PdfFormat);
printer.setPaperSize(QPrinter::A4);
printer.setPageMargins(15,15,15,15,QPrinter::Millimeter);
printer.setOutputFileName("test.pdf"); // will be in build folder

painter.begin(&printer);

painter.drawText(0,printer.pageRect().y()*1,QString::fromUtf8("Ligne 0"));

painter.save(); // save the parameters of painter for a normal use to write texte

qDebug() <<"before translate"<< printer.pageRect().y()<<printer.pageRect().x()<<printer.pageRect().width()<<printer.pageRect().height()<<ui->tab_indic->size();

double xscale = printer.pageRect().width() / double(pix.width());
double yscale = printer.pageRect().height() / double(pix.height());
double scale = qMin(xscale, yscale);

qDebug() <<"scale = "<< scale;

/////////// Translate new parameters to the painter for draw the qtablewidget /////////////////

painter.translate(printer.paperRect().x() + printer.pageRect().width() / 2,printer.paperRect().y() + printer.pageRect().height() / 2);

painter.scale(scale, scale);

painter.translate(-ui->tab_indic->width() / 2, -ui->tab_indic->height() / 2);

painter.drawPixmap(0, 0, pix);

qDebug() <<"post translate"<< printer.pageRect().y()<<printer.pageRect().x()<<printer.pageRect().width()
<<printer.pageRect().height()<<ui->tab_indic->size()
<<printer.paperRect().x() + printer.pageRect().width() / 2
<<printer.paperRect().y() + printer.pageRect().height() / 2;

painter.restore();// restore the parameters save latest

qDebug() <<"post restore"<< printer.pageRect().y()<<printer.pageRect().x()<<printer.pageRect().width()<<printer.pageRect().height()<<ui->tab_indic->size();

QFont police("Tekton Pro",10);
QFontMetrics tailleMotPx = painter.fontMetrics();


painter.setPen(Qt::black);

painter.drawText((printer.paperRect().x())/2,0,"titre");

painter.drawText(0, printer.pageRect().y()*2,QString::fromUtf8("Ligne 1"));

printer.newPage();

I still have some questions to do a mad pdf but for now it's cool.

[mrjj]

Hi
Can i ask what a "mad pdf" is ?

[Albator]

it's a good question,@mrjj
well I'd say it's a mad pdf when it's visually beautiful but not only when I've managed to make a code that automate pdf creation by including all the widgets I need in a fast and ergonomic way without any placement hassle, no problem to cut a table when the table is bigger than the page and it doesn't display on another page etc etc etc
it's not exactly crazy for programming champions like you jajaja!

[Mucip]

Dear @Albator

Please use LimeReport .
Don't make torture yourselves. :)

Regards,
Mucip:)

[Albator]

limereport it looks really nice, I didn't know it at all ! then you have to see if it's easy to use.
For the moment the report I want to create contains only:

• 1 table
• 2 graphs
• a dozen text boxes in qlineEdit or qtextEdit
  it's not a big deal. but the report could be useful one day thanks to me :)

and I have one more question:
Can you make line breaks appear in qtextEdit with a basic painter.drawText?

[mrjj]

@Albator said in make a beautiful pdf with qt:

Can you make line breaks appear in qtextEdit with a basic painter.drawText?

drawText can wordwrap if you use the overload that takes a rect.

using LimeReport might be a good option as not to hand program all of it.
Its very powerfull and once you learn it good, you can make almost anything.

[Mucip]

@mrjj said in make a beautiful pdf with qt:

Its very powerfull and once you learn it good, you can make almost anything.

Hi,
Absolutely true...

Dive into LimeReport... :)

Regards,
Mucip:)

[Albator]

@Mucip @mrjj @SGaist
Okay, you convinced me :) thanks again

[Albator]

I've been watching limereport and I'm thinking that at first glance it's not bad because you can find all our widgets directly in the database and all you have to do is drag and drop them to get them in a report.

But it doesn't do it automatically? we have to place them manually, at first glance anyway.

[mrjj]

@Albator
Well that is very normal with report generators as its very hard to guess
what to put in the report for the app.
So often that is the creative process.